英文翻译更新

AutoScanAndLabel/resources/en-US.lngres

@@ -55,7 +55,7 @@ AxisMoveControl_groupAxis_panel1_btnAddMove_Text	点动+	Jogging +
 AxisMoveControl_groupAxis_panel1_btnAxisAMove_Text	绝对运动	Absolute Motion
 AxisMoveControl_groupAxis_panel1_btnAxisReturnHome_Text	原点返回	Return To Home
 AxisMoveControl_groupAxis_panel1_btnAxisRMove_Text	相对运动	Relative Motion
-AxisMoveControl_groupAxis_panel1_btnAxisStop_Text	停止运动	Stop
+AxisMoveControl_groupAxis_panel1_btnAxisStop_Text	停止运动	Stop Motion
 AxisMoveControl_groupAxis_panel1_btnAxisVMove_Text	匀速运动	Uniform Motion
 AxisMoveControl_groupAxis_panel1_btnCloseAxis_Text	关闭伺服	Servo Off
 AxisMoveControl_groupAxis_panel1_btnComAlarmClear_Text	清除报警	Clear Alarm
@@ -106,13 +106,13 @@ Form1_tabControl1___IOControl_groupBox1_btn出口电滚筒停止_Text	出口电
 Form1_tabControl1___IOControl_groupBox1_btn出口电滚筒退出_Text	出口电滚筒退出	LP Electric Cylinder Unloading
 Form1_tabControl1___IOControl_groupBox1_btn出口阻挡上升_Text	出口阻挡上升	UP Stopper Rising
 Form1_tabControl1___IOControl_groupBox1_btn出口阻挡下降_Text	出口阻挡下降	UP Stopper Falling
-Form1_tabControl1___IOControl_groupBox1_btn打开设备光源_Text	打开设备光源	Turn On Eqiupment 's Light 
+Form1_tabControl1___IOControl_groupBox1_btn打开设备光源_Text	打开设备光源	Turn On Equipment‘s Light
 Form1_tabControl1___IOControl_groupBox1_btn打开相机光源_Text	打开相机光源	Turn On Camera Light
-Form1_tabControl1___IOControl_groupBox1_btn关闭设备光源_Text	关闭设备光源	Turn Off Eqiupment 's Light 
+Form1_tabControl1___IOControl_groupBox1_btn关闭设备光源_Text	关闭设备光源	Turn Off Equipment's Light 
 Form1_tabControl1___IOControl_groupBox1_btn关闭相机光源_Text	关闭相机光源	Turn Off Camera Light
-Form1_tabControl1___IOControl_groupBox1_btn夹爪放松_Text	吸盘机构放料	Release
-Form1_tabControl1___IOControl_groupBox1_btn夹爪回原_Text	吸盘机构回原	Reset Vacumm Gripper 
-Form1_tabControl1___IOControl_groupBox1_btn夹爪夹紧_Text	吸盘机构取料	Picking Operation
+Form1_tabControl1___IOControl_groupBox1_btn夹爪放松_Text	吸盘机构放料	Release Vacuum Gripper
+Form1_tabControl1___IOControl_groupBox1_btn夹爪回原_Text	吸盘机构回原	Reset Vacuum Gripper
+Form1_tabControl1___IOControl_groupBox1_btn夹爪夹紧_Text	吸盘机构取料	Picking Operation with vacuum Gripper
 Form1_tabControl1___IOControl_groupBox1_btn入口电滚筒进入_Text	入口电滚筒进入	LP Electric Cylinder Loading
 Form1_tabControl1___IOControl_groupBox1_btn入口电滚筒停止_Text	入口电滚筒停止	LP Electric Cylinder Stop
 Form1_tabControl1___IOControl_groupBox1_btn入口电滚筒退出_Text	入口电滚筒退出	LP Electric Cylinder Unloading
@@ -142,13 +142,13 @@ Form1_tabControl1___SettingControl_groupBox4_Text	条码匹配测试	Barcode Tes
 Form1_tabControl1_Res0008__IOControl_groupBox1_btnCloseAll_Text	关闭所有DO	Close All DO 
 Form1_tabControl1_Res0008__IOControl_groupBox1_btnCloseDO_Text	关闭	OFF
 Form1_tabControl1_Res0008__IOControl_groupBox1_btnOpenDo_Text	打开	ON
-Form1_tabControl1_Res0008__IOControl_groupBox1_btn打开设备光源_Text	打开设备光源	Turn On Eqiupment 's Light 
+Form1_tabControl1_Res0008__IOControl_groupBox1_btn打开设备光源_Text	打开设备光源	Turn On Equipment's Light
 Form1_tabControl1_Res0008__IOControl_groupBox1_btn打开相机光源_Text	打开相机光源	Turn On Camera Light
-Form1_tabControl1_Res0008__IOControl_groupBox1_btn关闭设备光源_Text	关闭设备光源	Turn Off Eqiupment 's Light 
+Form1_tabControl1_Res0008__IOControl_groupBox1_btn关闭设备光源_Text	关闭设备光源	Turn Off Equipment's Light
 Form1_tabControl1_Res0008__IOControl_groupBox1_btn关闭相机光源_Text	关闭相机光源	Turn Off Camera Light
-Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪放松_Text	吸盘放松	Vacumm Gripper Release
-Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪回原_Text	吸盘回原	Vacumm Gripper Reset 
-Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪夹紧_Text	吸盘夹紧	Vacumm Gripper Tighten
+Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪放松_Text	吸盘放松	Vacuum Gripper Release
+Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪回原_Text	吸盘回原	Vacuum Gripper Reset 
+Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪夹紧_Text	吸盘夹紧	Vacuum Gripper Tighten
 Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧电滚筒进入_Text	入口电滚筒进入	LP Electric Cylinder Loading
 Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧电滚筒停止_Text	入口电滚筒停止	LP Electric Cylinder Stop 
 Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧电滚筒退出_Text	入口电滚筒退出	LP Electric Cylinder Unloading
@@ -243,7 +243,7 @@ FrmCodeDecode_btnGray_Text	图像转灰	Image Graying
 FrmCodeDecode_btnLearn_Text	学习	Learning 
 FrmCodeDecode_btnLight_Text	提亮	Brightening
 FrmCodeDecode_btnScanTest_Text	新算法解码	New Algorithm Decoding 
-FrmCodeDecode_btnSelImage_Text	打开本地图片	Turn On Local Image 
+FrmCodeDecode_btnSelImage_Text	打开本地图片	Open Local Image 
 FrmCodeDecode_butt_cameracode_Text	获取相机图片及条码	Obtain camera images and barcodes
 FrmCodeDecode_button_optionfeil_Text	选择文件夹	Select Folder
 FrmCodeDecode_chbUseParam_Text	使用参数	Use Parameters 
@@ -252,7 +252,7 @@ FrmCodeDecode_label1_Text	图片路径	Image Path
 FrmCodeDecode_label2_Text	相机列表：	Camera List 
 FrmCodeDecode_label3_Text	条码类型：	Barcode Type 
 FrmCodeDecode_label4_Text	参数路径	Parameter Path 
-FrmCodeDecode_label6_Text	图片识别结果	Image recognition results:
+FrmCodeDecode_label6_Text	图片识别结果	Image Recognition results:
 FrmCodeDecode_lblCount_Text	条码数量：	Barcode Quantity 
 FrmCodeDecode_Text	二维码识别	QR Barcode Recognition
 FrmLabel_BtnFieldAdd_Text	字段添加	Add Field 
@@ -265,7 +265,7 @@ FrmLabel_BtnRename_Text	重命名	Rename
 FrmLabel_BtnSave_Text	保存	Save 
 FrmLabel_groupBox1_Text	字段说明	Field Description 
 FrmLabel_grpDsc_Text	字段说明	Field Description 
-FrmLabel_label_labelsize_Text	标签尺寸:	Label size
+FrmLabel_label_labelsize_Text	标签尺寸:	Label Size
 FrmLabel_label5_Text	高:	Height:
 FrmLabel_label6_Text	宽:	Width:
 FrmLabel_label7_Text	字段属性	Field Properties
@@ -279,7 +279,7 @@ menuStrip1_关于ToolStripMenuItem_Text	关于	About
 menuStrip1_设备操作ToolStripMenuItem_Text	设备操作	Config.
 menuStrip1_条码规则ToolStripMenuItem_Text	条码规则	Barcode Rules
 menuStrip1_退出ToolStripMenuItem1_Text	退出	Exit
-menuStrip1_相机条码ToolStripMenuItem_Text	条码识别(相机)	Barcode recognition (camera)
+menuStrip1_相机条码ToolStripMenuItem_Text	条码识别(相机)	Barcode Recognition (camera)
 menuStrip1_语言toolStripMenuItem_Text	语言	Language 
 设备操作ToolStripMenuItem_打开ToolStripMenuItem_Text	打开	Open
 设备操作ToolStripMenuItem_二维码识别调试ToolStripMenuItem_Text	二维码识别调试	QR Barcode Recognition Config.
@@ -297,7 +297,7 @@ AutoRun_HddLed	自动指示灯	Automatic Indicator
 Cam_Pixel_X_Ratio	图像/X轴比值	Image/X Axis Ratio 
 Cam_Pixel_Y_Ratio	图像/Y轴比值	Image/Y Axis Ratio 
 Camera_Led	相机照明	Camera Illumination
-Device_Led	设备照明	Eqiupment Illumination 
+Device_Led	设备照明	Equipment Illumination
 DischargeAGV_Feeding	出料口AGV送料串请求	UP AGV Loading Stacker Request.
 DischargeAGV_Receiving	出料口AGV收料串请求	UP AGV Unloading Stacker Request.
 FeedAGV_Feed	进料口AGV送料串请求	LP AGV Loading Stacker Request..
@@ -366,8 +366,8 @@ RightStopDown	进料口阻挡气缸下降端	LP Stopper Cylinder Down End
 RightStopUP	进料口阻挡气缸上升端	LP Stopper Cylinder Up End 
 RightTop_Check	进料定位料盘检测	Load Positioning Reel Detection 
 RunSign_HddLed	待机指示灯	Standby Indicator 
-Sucker_Clamp	吸盘吸料	Vacumm Gripper Get Material
-Sucker_Release	吸盘放料	Vacumm Gripper Release Material
+Sucker_Clamp	吸盘吸料	Vacuum Gripper Get Material
+Sucker_Release	吸盘放料	Vacuum Gripper Release Material
 SuddenStop_BTN	急停	E-Stop 
 Take_Middle_Axis	取料旋转轴	Picking(P) Rotation Axis 
 Take_Middle_P1	取料旋转轴待机点P1	P Rotation Axis Standby Point P1 
@@ -382,7 +382,7 @@ Take_UpDown_P4	取料升降轴取左料低点P4	P Lift Axis Left Picking Low Poi
 Take_UpDown_P5	取料升降轴NG放料点P5	P Lift Axis NG Unload Point P5
 TraySize_13	13寸料盘检测	13-Inch Reel Detection 
 TraySize_15	15寸料盘检测	15-Inch Reel Detection 
-TraySize_7	吸盘压力检测	Vacumm Stress Detection
+TraySize_7	吸盘压力检测	Vacuum Stress Detection
 Res0001	关于 {0}	About {0} 
 Res0001.b9534cf3	...清除报警1	Clear Alarm1
 Res0002	版本 {0}	Version {0} 
@@ -405,7 +405,7 @@ Res0015	启动	Start
 Res0016	重置	Reset
 Res0017	扫码还没完成,无法打开调试!请稍后再试.	Waiting For Scan Completion To Do Config.
 Res0018	料串已是释放状态	Reel Already Released 
-Res0018.7f6dfad7	...伺服连接中	
+Res0018.7f6dfad7	...伺服连接中	...Connecting to the servo
 Res0019	正在执行料串释放	Reel Releasing 
 Res0020	出口料串正在提升或下降, 不能释放	UP Stacker Movement，Releasing is Not Allowed.
 Res0021	出口料串等待释放中({0})	Waiting For Release {0} 
@@ -471,7 +471,7 @@ Res0078	运行结果:	Task Result:
 Res0079	机器尚未启动不能呼叫AGV	Machine Not Started. Cannot Call AGV
 Res0080	当前有料串不能请求进入料串	Cannot Request Importing Current Stacker 
 Res0081	当前没有料串不能请求取料串	Cannot Request Stacker Due To No Stacker , 
-Res0082	机器尚在运行,不能退出,请先停止运行.	Cannot Request Stacker Retrieval Machine In Operation, 
+Res0082	机器尚在运行,不能退出,请先停止运行.	Cannot Request Stacker Retrieval，Machine In Operation, 
 Res0083	左侧料串正在提升或下降,不能释放	UP Stacker Movement, Unable to Release
 Res0084	左侧料串等待释放中({0})	UP Stacker is Awaiting Release ({0}) 
 Res0085	安全释放左侧料串	UP Stacker Safety Release
@@ -481,7 +481,7 @@ Res0088	安全释放右侧料串	LP Stacker Safety Release
 Res0089	右侧料串正在运行,不能手动上料	LP Stacker Operating, Manual Loading is Not Allowed.
 Res0090	左侧料串正在运行,不能手动上料	UP Stacker Operating, Manual Loading is Not Allowed.
 Res0091	请确认是否运动到该位置	Confirm Movement To This Position
-Res0092	确定要删除:\"{0}\"?	Deletion: "{0}"? 
+Res0092	确定要删除:\"{0}\"?	Confirm Deletion: "{0}"? 
 Res0093	右侧料串已空,等待取走料串	LP Stacker Empty, Awaiting Remove 
 Res0094	左侧料串已满,等待取走料串	UP Stacker Full, Awaiting Remove 
 Res0095	左侧空闲中	UP Available
@@ -491,8 +491,8 @@ Res0098	等待左侧允许放料	Waiting For UP Available
 Res0099	等待料盘取走	Waiting For Reel Removal 
 Res0100	,料串已清空.	Stacker Empty 
 Res0101	配置模式	Config. Mode
-Res0102	吸盘夹紧	Tighten Vacumm Gripper
-Res0103	吸盘放松	Release Vacumm Gripper
+Res0102	吸盘夹紧	Tighten Vacuum Gripper
+Res0103	吸盘放松	Release Vacuum Gripper
 Res0104	等待	Waiting
 Res0105	超时	Time Out
 Res0106	秒	Second
@@ -512,7 +512,7 @@ Res0119.cbd5d752	清理报警，	Clearing The Alarm.
 Res0120.405c5a9e	,收到原点完成信号，当前位置[	Received Origin Completion Signal, Current Position [
 Res0121.6658614e	]，误差过大，需要报警	], Deviation Too Large, Alarm Needed
 Res0122.62c858d3	标签取起失败!	Failed To Retrieve Label
-Res0123.d86f0192	有料串,已提取{0}张料盘	Have Stacker, {0} Retrived 
+Res0123.d86f0192	有料串,已提取{0}张料盘	Have Stacker, {0} Retrived Reels
 Res0124.84e7c741	批量轴上升到上料点	Batch Axis Rises To Loading Point
 Res0125.ed4de1c6	扫码完成	Scan Completed
 Res0126.f11b67ff	标签打印机打开失败	Label Printer Startup Failure
@@ -522,10 +522,10 @@ Res0129.0e13d0de	标签打印失败,请检查打印机状态,关门后将自动
 Res0130.c3836615	标签吸取失败,请检查,关门后将自动重试	Label sucking failed, please check, will automatically retry after closing the door
 Res0131.df796d2d	运动报警	Motion Alarm
 Res0188	电夹爪通讯失败:{0}	Eletric Gripper Communication Failure:{0}
-Res0189	IO板卡初始化失败	IO Card Failed To Initialize.
+Res0189	IO板卡初始化失败	IO Card Initialization Failure
 Res0190	打开配置模式	Turn On Configuration Modo 
-Res0192	吸盘夹紧	Vacumm Gripper Tightened
-Res0193	吸盘放松	Vacumm Gripper Released
+Res0192	吸盘夹紧	Vacuum Gripper Tightened
+Res0193	吸盘放松	Vacuum Gripper Released
 Res0194	请先选择运动轴	Please Select a Motion Axis First
 Res0195	警告 	Warning
 Res0196	点动+ 	Jogging+