AboutBox1_tableLayoutPanel_labelCompanyName_Text	上海挚锦科技有限公司	Neotel Technology Co., Ltd
AboutBox1_tableLayoutPanel_labelProductName_Text	自动扫码贴标机	Neo Scan Plus
AboutBox1_tableLayoutPanel_labelVersion_Text	版本 	Version
AboutBox1_tableLayoutPanel_okButton_Text	确定	Ok
AgvControl_checkBox1_Text	手动	Manual Operation
AgvControl_groupBox_left_button_Leftleavefull_Text	满料串取出	Full Stacker Unloaidng
AgvControl_groupBox_left_button_leftneedempty_Text	空料串送入	Empty Staker Loading
AgvControl_groupBox_left_Text	出口	UP
AgvControl_groupBox_right_button_rightleavefull_Text	空料串取出	Request Empty Stacker
AgvControl_groupBox_right_button_rightneedempty_Text	满料串送入	Request Full Stacker
AgvControl_groupBox_right_Text	入口	LP
AgvControl_groupBox2_lblCurMissionId_Text	当前的mission id	Current Task ID
AgvControl_groupBox2_lblCurRunMissionId_Text	正在运行的mission id	Running Task ID
AgvControl_groupBox2_lblMissionResult_Text	mission运行结果	Task Run Results
AgvControl_groupBox2_lblMissionRunstate_Text	mission运行状态	Task Run Status
AgvControl_groupBox2_Text	任务状态[127.0.0.1]	AGV Status [127.0.0.1]
AgvControl_groupBox3_button1_Text	任务测试	Manual Task Test
AgvControl_groupBox3_button2_Text	重置呼叫	Reset Call Status
AgvControl_groupBox3_label1_Text	去待机点任务编号：	Standby Task ID
AgvControl_groupBox3_label3_Text	去入口任务编号：	Move To LP Task ID:
AgvControl_groupBox3_label4_Text	去出口任务编号：	Move To UP Task ID:
AgvControl_groupBox3_label5_Text	流出AGV任务编号：	Stacker Unloading AGV Task ID
AgvControl_groupBox3_label6_Text	流入AGV任务编号：	Stacker Loading AGV Task ID
AgvControl_groupBox3_label7_Text	任务编号：	Task ID:
AgvControl_groupBox3_Text	手动任务	Manually Send Task
AxisMoveControl_groupAxis_groupBox1_btnGetAlarm_Text	读报状态	Reading Status
AxisMoveControl_groupAxis_groupBox1_label10_Text	忙碌状态:	Busy Status:
AxisMoveControl_groupAxis_groupBox1_label11_Text	回零状态:	Home Status:
AxisMoveControl_groupAxis_groupBox1_label22_Text	正极限信号:	Positive Limit Signal:
AxisMoveControl_groupAxis_groupBox1_label24_Text	负极限信号:	Negative Limit Signal:
AxisMoveControl_groupAxis_groupBox1_label3_Text	报警状态:	Alarm Status:
AxisMoveControl_groupAxis_groupBox1_label5_Text	伺服状态:	Servo Status:
AxisMoveControl_groupAxis_groupBox1_label6_Text	原点信号:	Home Signal:
AxisMoveControl_groupAxis_groupBox1_Text	状态	Status:
AxisMoveControl_groupAxis_groupBox2_label2_Text	实际加速度:	Acceleration:
AxisMoveControl_groupAxis_groupBox2_label4_Text	回原状态:	Return To Home:
AxisMoveControl_groupAxis_groupBox2_label50_Text	规划模式:	PLM:
AxisMoveControl_groupAxis_groupBox2_label52_Text	规划位置:	Planning Position:
AxisMoveControl_groupAxis_groupBox2_label53_Text	规划速度:	Planning Velocity
AxisMoveControl_groupAxis_groupBox2_label55_Text	实际位置:	Actual Position:
AxisMoveControl_groupAxis_groupBox2_label56_Text	实际速度:	Actual Velocity:
AxisMoveControl_groupAxis_groupBox2_lblAlarmcode_Text	错误码:160	Error Code:160
AxisMoveControl_groupAxis_groupBox2_lblALM_Text	报警	Alarm
AxisMoveControl_groupAxis_groupBox2_lblBUSY_Text	忙碌	Busy
AxisMoveControl_groupAxis_groupBox2_lblEMG_Text	急停	E-Stop
AxisMoveControl_groupAxis_groupBox2_lblinP_Text	到位	In Position
AxisMoveControl_groupAxis_groupBox2_lblINP_Text	到位	In Position
AxisMoveControl_groupAxis_groupBox2_lblNEL_Text	负极限	Negative Limit
AxisMoveControl_groupAxis_groupBox2_lblORG_Text	原点	Home
AxisMoveControl_groupAxis_groupBox2_lblPEL_Text	正极限	Positive Limit
AxisMoveControl_groupAxis_groupBox2_lblSvOn_Text	伺服	Servo
AxisMoveControl_groupAxis_groupBox2_lblWARN_Text	警告	Caution
AxisMoveControl_groupAxis_groupBox2_Text	轴状态监控	Axis Status Monitoring
AxisMoveControl_groupAxis_panel1_btnAddMove_Text	点动+	Jogging +
AxisMoveControl_groupAxis_panel1_btnAxisAMove_Text	绝对运动	Absolute Motion
AxisMoveControl_groupAxis_panel1_btnAxisReturnHome_Text	原点返回	Return To Home
AxisMoveControl_groupAxis_panel1_btnAxisRMove_Text	相对运动	Relative Motion
AxisMoveControl_groupAxis_panel1_btnAxisStop_Text	停止运动	Stop
AxisMoveControl_groupAxis_panel1_btnAxisVMove_Text	匀速运动	Uniform Motion
AxisMoveControl_groupAxis_panel1_btnCloseAxis_Text	关闭伺服	Servo Off
AxisMoveControl_groupAxis_panel1_btnComAlarmClear_Text	清除报警	Clear Alarm
AxisMoveControl_groupAxis_panel1_btnDelMove_Text	点动-	Jogging-
AxisMoveControl_groupAxis_panel1_btnOpenAxis_Text	打开伺服	Turn On Servo
AxisMoveControl_groupAxis_panel1_btnReadPosition_Text	读取位置	Read Position
AxisMoveControl_groupAxis_panel1_cmbAxis_Text	进料提升轴	Loading Lifting Axis
AxisMoveControl_groupAxis_panel1_label1_Text	点动速度：	Jogging Speed
AxisMoveControl_groupAxis_panel1_label45_Text	端口号:	Port:
AxisMoveControl_groupAxis_panel1_label46_Text	地址:	Address:
AxisMoveControl_groupAxis_panel1_label47_Text	目标速度:	Target Velocity
AxisMoveControl_groupAxis_panel1_label48_Text	目标位置:	Target Position
AxisMoveControl_groupAxis_panel1_label49_Text	AC伺服:	AC Servo:
AxisMoveControl_groupAxis_panel1_label8_Text	实时位置:	Live Position
AxisMoveControl_groupAxis_panel1_linkLabel1_Text	复制	Copy
AxisMoveControl_groupAxis_Text	伺服运动	Servo Motion
Form1_btn_run_Text	启动	Start
Form1_btn_stop_Text	停止	Stop
Form1_groupBox2_Text	消息	Message
Form1_tabControl1___AgvControl_checkBox1_Text	手动操作	Manual Operation
Form1_tabControl1___AgvControl_groupBox_left_button_Leftleavefull_Text	请求取满料串	Request Full Stacker
Form1_tabControl1___AgvControl_groupBox_left_button_leftneedempty_Text	请求送空料串	Request Empty Stacker
Form1_tabControl1___AgvControl_groupBox_left_Text	出口	UP
Form1_tabControl1___AgvControl_groupBox_right_button_rightleavefull_Text	请求取空料串	Request Empty Stacker
Form1_tabControl1___AgvControl_groupBox_right_button_rightneedempty_Text	请求送满料串	Request Full Stacker
Form1_tabControl1___AgvControl_groupBox_right_Text	入口	LP
Form1_tabControl1___AgvControl_groupBox2_lblCurMissionId_Text	当前的任务 ID	Current Task ID
Form1_tabControl1___AgvControl_groupBox2_lblCurRunMissionId_Text	正在运行的任务 ID	Running Task ID
Form1_tabControl1___AgvControl_groupBox2_lblMissionResult_Text	任务运行结果	Task Run Results
Form1_tabControl1___AgvControl_groupBox2_lblMissionRunstate_Text	任务运行状态	Task Run Status
Form1_tabControl1___AgvControl_groupBox2_Text	AGV状态[127.0.0.1]	AGV Status [127.0.0.1]
Form1_tabControl1___AgvControl_groupBox3_button1_Text	手动任务测试	Manual Task Test
Form1_tabControl1___AgvControl_groupBox3_button2_Text	重置呼叫状态	Reset Call Status
Form1_tabControl1___AgvControl_groupBox3_label1_Text	待机点任务号	Standby Task ID
Form1_tabControl1___AgvControl_groupBox3_label3_Text	移动到入口的任务编号：	Move To LP Task ID:
Form1_tabControl1___AgvControl_groupBox3_label4_Text	移动到出口的任务编号：	Move To UP Task ID:
Form1_tabControl1___AgvControl_groupBox3_label5_Text	料串流出AGV的任务编号：	Stacker Unloading to AGV Task ID:
Form1_tabControl1___AgvControl_groupBox3_label6_Text	料串流入AGV的任务编号：	Stacker Loading to AGV Task ID:
Form1_tabControl1___AgvControl_groupBox3_label7_Text	任务编号：	Task ID:
Form1_tabControl1___AgvControl_groupBox3_Text	手动发送任务	Manually Send Task
Form1_tabControl1___AxisControl_panel1_configControl1_btnSavePos_Text	全部保存	Save All
Form1_tabControl1___AxisControl_panel1_configControl1_groupBox3_Text	点位列表	Positon List
Form1_tabControl1___IOControl_groupBox1_btnCloseAll_Text	关闭所有DO	Close All DO
Form1_tabControl1___IOControl_groupBox1_btnCloseDO_Text	关闭	Off
Form1_tabControl1___IOControl_groupBox1_btnOpenDo_Text	打开	On
Form1_tabControl1___IOControl_groupBox1_btn出口电滚筒进入_Text	出口电滚筒进入	LP Electric Cylinder Loading
Form1_tabControl1___IOControl_groupBox1_btn出口电滚筒停止_Text	出口电滚筒停止	LP Electric Cylinder Stop
Form1_tabControl1___IOControl_groupBox1_btn出口电滚筒退出_Text	出口电滚筒退出	LP Electric Cylinder Unloading
Form1_tabControl1___IOControl_groupBox1_btn出口阻挡上升_Text	出口阻挡上升	UP Stopper Rising
Form1_tabControl1___IOControl_groupBox1_btn出口阻挡下降_Text	出口阻挡下降	UP Stopper Falling
Form1_tabControl1___IOControl_groupBox1_btn打开设备光源_Text	打开设备光源	Turn On Eqiupment 's Light 
Form1_tabControl1___IOControl_groupBox1_btn打开相机光源_Text	打开相机光源	Turn On Camera Light
Form1_tabControl1___IOControl_groupBox1_btn关闭设备光源_Text	关闭设备光源	Turn Off Eqiupment 's Light 
Form1_tabControl1___IOControl_groupBox1_btn关闭相机光源_Text	关闭相机光源	Turn Off Camera Light
Form1_tabControl1___IOControl_groupBox1_btn夹爪放松_Text	吸盘机构放料	Release
Form1_tabControl1___IOControl_groupBox1_btn夹爪回原_Text	吸盘机构回原	Reset Vacumm Gripper 
Form1_tabControl1___IOControl_groupBox1_btn夹爪夹紧_Text	吸盘机构取料	Picking Operation
Form1_tabControl1___IOControl_groupBox1_btn入口电滚筒进入_Text	入口电滚筒进入	LP Electric Cylinder Loading
Form1_tabControl1___IOControl_groupBox1_btn入口电滚筒停止_Text	入口电滚筒停止	LP Electric Cylinder Stop
Form1_tabControl1___IOControl_groupBox1_btn入口电滚筒退出_Text	入口电滚筒退出	LP Electric Cylinder Unloading
Form1_tabControl1___IOControl_groupBox1_btn入口阻挡上升_Text	入口阻挡上升	LP Stopper Rising
Form1_tabControl1___IOControl_groupBox1_btn入口阻挡下降_Text	入口阻挡下降	LP Stopper Falling
Form1_tabControl1___IOControl_groupBox1_label14_Text	地址:	Address:
Form1_tabControl1___IOControl_groupBox1_label5_Text	定时(ms):	Timing (ms) 
Form1_tabControl1___IOControl_groupBox1_Text	DO写入	DO Write
Form1_tabControl1___IOControl_groupBox3_Text	DI列表	DI List 
Form1_tabControl1___IOControl_groupBox4_Text	DO列表	DO List 
Form1_tabControl1___SettingControl_btn_labelConfig._Text	贴标调试	Label Config.
Form1_tabControl1___SettingControl_chbAutoRun_Text	开机	Power On
Form1_tabControl1___SettingControl_groupBox1_btn_labeledit_Text	标签编辑	Label Editing 
Form1_tabControl1___SettingControl_groupBox1_label1_Text	打印机	Printer 
Form1_tabControl1___SettingControl_groupBox1_label2_Text	标签名	Label Name 
Form1_tabControl1___SettingControl_groupBox1_Text	打印设置	Print Setting
Form1_tabControl1___SettingControl_groupBox2_listEdit_pn_btn_add_Text	添加	Add 
Form1_tabControl1___SettingControl_groupBox2_listEdit_pn_btn_cel_Text	取消	Cancel 
Form1_tabControl1___SettingControl_groupBox2_listEdit_pn_btn_del_Text	删除	Delete 
Form1_tabControl1___SettingControl_groupBox2_Text	PN匹配规则	PN Matching 
Form1_tabControl1___SettingControl_groupBox3_listEditControl1_btn_add_Text	添加	Add 
Form1_tabControl1___SettingControl_groupBox3_listEditControl1_btn_cel_Text	取消	Cancel 
Form1_tabControl1___SettingControl_groupBox3_listEditControl1_btn_del_Text	删除	Delete 
Form1_tabControl1___SettingControl_groupBox3_Text	数量匹配规则	QTY Matching Rule
Form1_tabControl1___SettingControl_groupBox4_btn_codetest_Text	匹配	Match
Form1_tabControl1___SettingControl_groupBox4_Text	条码匹配测试	Barcode Testing
Form1_tabControl1_Res0008__IOControl_groupBox1_btnCloseAll_Text	关闭所有DO	Close All DO 
Form1_tabControl1_Res0008__IOControl_groupBox1_btnCloseDO_Text	关闭	OFF
Form1_tabControl1_Res0008__IOControl_groupBox1_btnOpenDo_Text	打开	ON
Form1_tabControl1_Res0008__IOControl_groupBox1_btn打开设备光源_Text	打开设备光源	Turn On Eqiupment 's Light 
Form1_tabControl1_Res0008__IOControl_groupBox1_btn打开相机光源_Text	打开相机光源	Turn On Camera Light 
Form1_tabControl1_Res0008__IOControl_groupBox1_btn关闭设备光源_Text	关闭设备光源	Turn Off Eqiupment 's Light 
Form1_tabControl1_Res0008__IOControl_groupBox1_btn关闭相机光源_Text	关闭相机光源	Turn Off Camera Light
Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪放松_Text	吸盘放松	Vacumm Gripper Release
Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪回原_Text	吸盘回原	Vacumm Gripper Reset 
Form1_tabControl1_Res0008__IOControl_groupBox1_btn夹爪夹紧_Text	吸盘夹紧	Vacumm Gripper Tighten
Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧电滚筒进入_Text	入口电滚筒进入	LP Electric Cylinder Loading
Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧电滚筒停止_Text	入口电滚筒停止	LP Electric Cylinder Stop 
Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧电滚筒退出_Text	入口电滚筒退出	LP Electric Cylinder Unloading
Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧阻挡上升_Text	入口阻挡上升	LP Stopper Rising
Form1_tabControl1_Res0008__IOControl_groupBox1_btn右侧阻挡下降_Text	入口阻挡下降	LP Stopper Falling
Form1_tabControl1_Res0008__IOControl_groupBox1_btn左侧电滚筒进入_Text	出口电滚筒进入	UP Electric Cylinder Loading
Form1_tabControl1_Res0008__IOControl_groupBox1_btn左侧电滚筒停止_Text	出口电滚筒停止	UP Electric Cylinder Stop
Form1_tabControl1_Res0008__IOControl_groupBox1_btn左侧电滚筒退出_Text	出口电滚筒退出	UP Electric Cylinder Unloading
Form1_tabControl1_Res0008__IOControl_groupBox1_btn左侧阻挡上升_Text	出口阻挡上升	UP Stopper Rising 
Form1_tabControl1_Res0008__IOControl_groupBox1_btn左侧阻挡下降_Text	出口阻挡下降	UP Stopper Falling
Form1_tabControl1_Res0008__IOControl_groupBox1_label14_Text	地址:	Address
Form1_tabControl1_Res0008__IOControl_groupBox1_label5_Text	定时(ms):	Timing (ms) 
Form1_tabControl1_Res0008__IOControl_groupBox1_Text	DO写入	DO Write
Form1_tabControl1_Res0008__IOControl_groupBox3_tableLayoutPanel1_IO_RightCar_Check_label1_Text	X11_进料口料车检测	LP Trolley Detection
Form1_tabControl1_Res0008__IOControl_groupBox3_Text	DI列表	DI List 
Form1_tabControl1_Res0008__IOControl_groupBox4_tableLayoutPanel2_IO_RightMoto_Reverse_label1_Text	Y09_进料口电机反转指令	Input port motor reverse command
Form1_tabControl1_Res0008__IOControl_groupBox4_Text	DO列表	DO List
Form1_tabControl1_Res0009__AxisControl_panel1_configControl1_btnSavePos_Text	全部保存	Save All 
Form1_tabControl1_Res0009__AxisControl_panel1_configControl1_groupBox3_tableLayoutPanel1_Label_XOffset_Text	贴标X轴偏移量	Labeling X-axis Offset
Form1_tabControl1_Res0009__AxisControl_panel1_configControl1_groupBox3_tableLayoutPanel1_Label_YOffset_Text	贴标Y轴偏移量	Labeling Y-axis Offset
Form1_tabControl1_Res0009__AxisControl_panel1_configControl1_groupBox3_Text	点位列表	Positions List 
Form1_tabControl1_Res0010__SettingControl_btn_labelConfig._Text	贴标调试	Label Config.
Form1_tabControl1_Res0010__SettingControl_btn_labelDebug_Text	贴标调试	Label Config.
Form1_tabControl1_Res0010__SettingControl_cb_EnableBuzzer_Text	使用蜂鸣器	Use Buzzer
Form1_tabControl1_Res0010__SettingControl_cb_IgnoreGratingSignal_Text	忽略安全光栅	Ignore Safety Light Curtain 
Form1_tabControl1_Res0010__SettingControl_chbAutoRun_Text	开机	Power On
Form1_tabControl1_Res0010__SettingControl_checkBox1_Text	忽略安全检查(含安全光栅)	Ignore Safety Check (Including Safety Grating)
Form1_tabControl1_Res0010__SettingControl_groupBox1_btn_labeledit_Text	标签编辑	Label Editing 
Form1_tabControl1_Res0010__SettingControl_groupBox1_label1_Text	打印机	Printer 
Form1_tabControl1_Res0010__SettingControl_groupBox1_label2_Text	标签名	Label Name 
Form1_tabControl1_Res0010__SettingControl_groupBox1_Text	打印设置	Print Setting
Form1_tabControl1_Res0010__SettingControl_groupBox2_listEdit_pn_btn_add_Text	追加	Add 
Form1_tabControl1_Res0010__SettingControl_groupBox2_listEdit_pn_btn_cel_Text	取消	Cancel 
Form1_tabControl1_Res0010__SettingControl_groupBox2_listEdit_pn_btn_del_Text	删除	Delete 
Form1_tabControl1_Res0010__SettingControl_groupBox2_Text	PN匹配规则	PN Matching Rule
Form1_tabControl1_Res0010__SettingControl_groupBox3_listEditControl1_btn_add_Text	追加	Add 
Form1_tabControl1_Res0010__SettingControl_groupBox3_listEditControl1_btn_cel_Text	取消	Cancel 
Form1_tabControl1_Res0010__SettingControl_groupBox3_listEditControl1_btn_del_Text	删除	Delete 
Form1_tabControl1_Res0010__SettingControl_groupBox3_Text	数量匹配规则	QTY Matching Rule
Form1_tabControl1_Res0010__SettingControl_groupBox4_btn_codetest_Text	匹配	Match 
Form1_tabControl1_Res0010__SettingControl_groupBox4_Text	条码匹配测试	Barcode Testing 
Form1_tabControl1_Res0010__SettingControl_uC_U11_gb_btn_selectdir_Text	浏览	Browsing 
Form1_tabControl1_Res0010__SettingControl_uC_U11_gb_cb_exportreephoto_Text	自动拍摄并保存料盘图像. 勾选后仅本次有效	Automatically Capture and Save Tray Images. (Checked for this time only)
Form1_tabControl1_Res0010__SettingControl_uC_U11_gb_label_dir_Text	图像保存目录	Save Image
Form1_tabControl1_Res0010__SettingControl_uC_U11_gb_Text	料盘图像导出	Reel Image Export
Form1_tabControl1_Res0070__AgvControl_checkBox1_Text	手动	Manual 
Form1_tabControl1_Res0070__AgvControl_groupBox_left_button_Leftleavefull_Text	满料串取出	Unload Full Stacker
Form1_tabControl1_Res0070__AgvControl_groupBox_left_button_leftneedempty_Text	空料串送入	Load Empty Stacker
Form1_tabControl1_Res0070__AgvControl_groupBox_left_Text	出口	UP
Form1_tabControl1_Res0070__AgvControl_groupBox_right_button_rightleavefull_Text	空料串取出	Unload Empty Stacker
Form1_tabControl1_Res0070__AgvControl_groupBox_right_button_rightneedempty_Text	满料串送入	Load Full Stacker
Form1_tabControl1_Res0070__AgvControl_groupBox_right_Text	入口	LP
Form1_tabControl1_Res0070__AgvControl_groupBox2_lblCurMissionId_Text	当前的任务 ID	Current Task ID 
Form1_tabControl1_Res0070__AgvControl_groupBox2_lblCurRunMissionId_Text	正在运行的任务 ID	Running Task ID 
Form1_tabControl1_Res0070__AgvControl_groupBox2_lblMissionResult_Text	任务运行结果	Task Result 
Form1_tabControl1_Res0070__AgvControl_groupBox2_lblMissionRunstate_Text	任务运行状态	Task Status 
Form1_tabControl1_Res0070__AgvControl_groupBox2_Text	任务状态[192.168.101.137]	Task Status [192.168.101.137] 
Form1_tabControl1_Res0070__AgvControl_groupBox3_button1_Text	任务测试	Task Testing 
Form1_tabControl1_Res0070__AgvControl_groupBox3_button2_Text	重置呼叫	Reset Call 
Form1_tabControl1_Res0070__AgvControl_groupBox3_label1_Text	去待机点任务编号：	Standby Task ID 
Form1_tabControl1_Res0070__AgvControl_groupBox3_label3_Text	去入口任务编号：	LP Task ID 
Form1_tabControl1_Res0070__AgvControl_groupBox3_label4_Text	去出口任务编号：	UP Task ID 
Form1_tabControl1_Res0070__AgvControl_groupBox3_label5_Text	流出AGV任务编号：	AGV Loading Task ID 
Form1_tabControl1_Res0070__AgvControl_groupBox3_label6_Text	流入AGV任务编号：	AGV Unloading Task ID 
Form1_tabControl1_Res0070__AgvControl_groupBox3_label7_Text	任务编号：	Task ID
Form1_tabControl1_Res0070__AgvControl_groupBox3_Text	手动任务	Manual Task 
Form1_tabControl1_tabPage1_btn_leftempty_Text	出口\n手动清空	UP\Manual Clear 
Form1_tabControl1_tabPage1_btn_maulstart_Text	入口\n手动上料	LP\Manual Loading 
Form1_tabControl1_tabPage1_btn_PauseBuzzer_Text	本次暂停警报器响声	Pause Alarm Sound 
Form1_tabControl1_tabPage1_btn_releaseleftshelf_Text	安全释放出口料串	Safely Release UP Reel 
Form1_tabControl1_tabPage1_btn_releaserightshelf_Text	安全释放入口料串	Safely Release LP Reel 
Form1_tabControl1_tabPage1_cb_EnableBuzzer_Text	使用蜂鸣器	Use Buzzer 
Form1_tabControl1_tabPage1_cb_IgnoreGratingSignal_Text	忽略安全光栅	Ignore Safety Light Curtain 
Form1_tabControl1_tabPage1_cb_IgnoreSafecheck_Text	忽略安全检查(含安全光栅)	Ignore Safety Check (Including Light Curtain) 
Form1_tabControl1_tabPage1_groupBox1_Text	运行状态	Running Status 
Form1_tabControl1_tabPage1_groupBox3_btn_leftempty_Text	手动上料	Manual Feeding
Form1_tabControl1_tabPage1_groupBox3_btn_releaseleftshelf_Text	释放料串	Release Stacker
Form1_tabControl1_tabPage1_groupBox3_Text	出料口	Discharge Port
Form1_tabControl1_tabPage1_groupBox4_btn_maulstart_Text	手动上料	Manual Feeding
Form1_tabControl1_tabPage1_groupBox4_btn_releaserightshelf_Text	释放料串	Release Stacker
Form1_tabControl1_tabPage1_groupBox4_Text	入料口	LP
Form1_tabControl1_tabPage1_Text	状态	Status
FrmCodeDecode_btnAn_Text	变暗	Dimming 
FrmCodeDecode_btnbarCode_Text	一维码识别	1D Barcode Recognition 
FrmCodeDecode_btnCameraImage_Text	相机获取图片	Capture Image From Camera 
FrmCodeDecode_btnClearLog_Text	清理日志	Clear Logs 
FrmCodeDecode_btnCopyN_Text	复制名称	Copy Name 
FrmCodeDecode_btnDCode_Text	二维码识别	2D Barcode Recognition 
FrmCodeDecode_btnErZhi_Text	二值化	Binarization 
FrmCodeDecode_btnExit_Text	退出	Exit 
FrmCodeDecode_btnGray_Text	图像转灰	Image Graying
FrmCodeDecode_btnLearn_Text	学习	Learning 
FrmCodeDecode_btnLight_Text	提亮	Brightening
FrmCodeDecode_btnScanTest_Text	新算法解码	New Algorithm Decoding 
FrmCodeDecode_btnSelImage_Text	打开本地图片	Turn On Local Image 
FrmCodeDecode_butt_cameracode_Text	获取相机图片及条码	Obtain camera images and barcodes
FrmCodeDecode_button_optionfeil_Text	选择文件夹	Select Folder
FrmCodeDecode_chbUseParam_Text	使用参数	Use Parameters 
FrmCodeDecode_check_issaveimage_Text	是否保存图片	Save Image
FrmCodeDecode_label1_Text	图片路径	Image Path 
FrmCodeDecode_label2_Text	相机列表：	Camera List 
FrmCodeDecode_label3_Text	条码类型：	Barcode Type 
FrmCodeDecode_label4_Text	参数路径	Parameter Path 
FrmCodeDecode_label6_Text	图片识别结果	Image recognition results:
FrmCodeDecode_lblCount_Text	条码数量：	Barcode Quantity 
FrmCodeDecode_Text	二维码识别	QR Barcode Recognition
FrmLabel_BtnFieldAdd_Text	字段添加	Add Field 
FrmLabel_BtnFieldDel_Text	字段删除	Delete Field
FrmLabel_BtnFieldFont_Text	字段字体	Field Font 
FrmLabel_BtnLabelDel_Text	删除	Delete 
FrmLabel_BtnLabelNew_Text	新建	New 
FrmLabel_BtnPrintTest_Text	打印测试	Print Test 
FrmLabel_BtnRename_Text	重命名	Rename 
FrmLabel_BtnSave_Text	保存	Save 
FrmLabel_groupBox1_Text	字段说明	Field Description 
FrmLabel_grpDsc_Text	字段说明	Field Description 
FrmLabel_label_labelsize_Text	标签尺寸:	Label size
FrmLabel_label5_Text	高:	Height:
FrmLabel_label6_Text	宽:	Width:
FrmLabel_label7_Text	字段属性	Field Properties
FrmLabel_Text	标签编辑	Label Editing 
FrmLabelSettings_btn_labeledit_Text	标签编辑	Label Editing
FrmLabelSettings_FrmLabelSettings_Text	标签设置	Label Settings
FrmLabelSettings_label1_Text	打印机	Printer
FrmLabelSettings_label2_Text	标签名	Label Name
menuStrip1_打印设置ToolStripMenuItem_Text	打印设置	Print Settings
menuStrip1_关于ToolStripMenuItem_Text	关于	About 
menuStrip1_设备操作ToolStripMenuItem_Text	设备操作	Config.
menuStrip1_条码规则ToolStripMenuItem_Text	条码规则	Barcode Rules
menuStrip1_退出ToolStripMenuItem1_Text	退出	Exit
menuStrip1_相机条码ToolStripMenuItem_Text	条码识别(相机)	Barcode recognition (camera)
menuStrip1_语言toolStripMenuItem_Text	语言	Language 
设备操作ToolStripMenuItem_打开ToolStripMenuItem_Text	打开	Open
设备操作ToolStripMenuItem_二维码识别调试ToolStripMenuItem_Text	二维码识别调试	QR Barcode Recognition Config.
设备操作ToolStripMenuItem_关闭ToolStripMenuItem_Text	关闭	Close
设备操作ToolStripMenuItem_启用调试模式ToolStripMenuItem_Text	新建	New 
设备操作ToolStripMenuItem_退出ToolStripMenuItem_Text	退出	Exit 
AgvRequest_FeedPort	进料口AGV请求应答	LP AGV Respond Request.
AgvRequest_Outlet	出料口AGV请求应答	UP AGV Respond Request.
Airpressure_Check	气压检测	Pressure Detection 
alarm	报警	Alarm
Alarm_Buzzer	报警蜂鸣器	Alarm Buzzer 
Alarm_HddLed	故障指示灯	Fault Indicator 
App_Title	自动贴标机	Neo Scan Plus
AutoRun_HddLed	自动指示灯	Automatic Indicator 
Cam_Pixel_X_Ratio	图像/X轴比值	Image/X Axis Ratio 
Cam_Pixel_Y_Ratio	图像/Y轴比值	Image/Y Axis Ratio 
Camera_Led	相机照明	Camera Illumination
Device_Led	设备照明	Eqiupment Illumination 
DischargeAGV_Feeding	出料口AGV送料串请求	UP AGV Loading Stacker Request.
DischargeAGV_Receiving	出料口AGV收料串请求	UP AGV Unloading Stacker Request.
FeedAGV_Feed	进料口AGV送料串请求	LP AGV Loading Stacker Request..
FeedAGV_Receiving	进料口AGV收料串请求	LP AGV Unloading Stacker Request.
GratingSignal_Check	光栅信号	Safety Curtain Signal 
HasNgBox	NG料箱检测	NG Box Detection 
HasPrinter	打印机到位检测	Printer Position Detection 
Label_R_360	贴标R轴360度脉冲	Label R Axis 360° Pulse 
Label_R_Angle_Diff	贴标R轴0位角度差	Label R Axis 0 Angle Difference 
Label_R_Axis	贴标移栽机构R轴	Label Transplant Mechanism R Axis 
Label_R_Offset	贴标R轴偏置距离像素	Label R Axis Offset Distance In Pixels 
Label_R_P1	贴标R轴待机点P1	Label R Axis Standby Point P1 
Label_R_P2	贴标R轴取标点P2	Label R Axis Label Picking Point P2 
Label_X_Axis	贴标移栽机构X轴	Label Transplant Mechanism X Axis 
Label_X_P1	贴标X轴待机点P1	Label X Axis Standby Point P1 
Label_X_P2	贴标X轴取标点P2	Label X Axis Label Picking Point P2
Label_X_P3	贴标X轴贴标基准点P3	Label X Axis Label Ref. Point P3 
Label_XOffset	贴标X轴偏移量	Labeling X-axis offset
Label_Y_Axis	贴标移栽机构Y轴	Label Transplant Mechanism Y Axis 
Label_Y_P1	贴标Y轴待机点P1	Label Y Axis Standby Point P1 
Label_Y_P2	贴标Y轴取标点P2	Label Y Axis Label Picking Point P2 
Label_Y_P3	贴标Y轴贴标基准点P3	Label Y Axis Label Ref. Point P3
Label_YOffset	贴标Y轴偏移量	Labeling Y-axis offset
Label_Z_Axis	贴标移栽机构Z轴	Label Transplant Mechanism Z Axis
Label_Z_P1	贴标Z轴待机点P1	Label Z Axis Standby Point P1 
Label_Z_P2	贴标Z轴取标前点P2	Label Z Axis Label Picking Pre-Point P2 
Label_Z_P3	贴标Z轴取标点P3	Label Z Axis Label Picking Point P3
Label_Z_P4	贴标Z轴贴标前点P4	Label Z Axis Pre-Label Point P4 
Label_Z_P5	贴标Z轴贴标点P5	Label Z Axis Label Point P5 
LabelCylinder_Bck	吸嘴气缸后退端	Nozzle Cylinder Retract End 
LabelCylinder_Fwd	吸嘴气缸前进端	Nozzle Cylinder Extend End 
LabelCylinder_Work	吸嘴取标	Nozzle Label Picking 
Left_Batch_Axis	出料提升轴	Unload Lifting Axis 
Left_Batch_P1	出料升轴低点P1	Unload Lifting Axis Low Point P1 
Left_Batch_P2	出料升轴高点P2	Unload Lifting Axis High Point P2 
Left_BTN	出料口确认按钮	UP Confirm Button 
LeftArm_Check	旋转臂出料侧检测	Unloading Side Detection 
LeftBackDoor_Check	后门左门禁	Rear Door Left Access Control 
LeftCar_Check	出料口料车检测	UP Reel Detection 
LeftEnd_Check	出料口料串到位检测	UP Reel In Position Detection 
LeftFornt_Check	出料口前端料串检测	UP Stacker In Position Detection
LeftMoto_Reverse	出料口电机反转指令	UP Motor Reverse Command 
LeftMoto_Run	出料口电机启动	UP Motor Start 
LeftOverHead_Check	出料定位料盘超限检测	Unloading Reel Overlimit Detection
LeftState_Led	出料口状态指示灯	UP Status Indicator 
LeftStopDown	出料口阻挡气缸下降端	UP Stopper Cylinder Down End
LeftStopUP	出料口阻挡气缸上升端	UP Stopper Cylinder Up End 
LeftTop_Check	出料定位料盘检测	Unload Positioning Reel Detection 
Right_Batch_Axis	进料提升轴	Load Lifting Axis 
Right_Batch_P1	进料升轴低点P1	Load Lifting Axis Low Point P1 
Right_Batch_P2	进料升轴高点P2	Load Lifting Axis High Point P2 
Right_Batch_X	入口轴心坐标X	LP Axis Center Coordinate X 
Right_Batch_Y	入口轴心坐标Y	LP Axis Center Coordinate Y 
Right_BTN	进料口确认按钮	LP Confirmation Button 
RightArm_Check	旋转臂进料侧检测	Loading Port Side Detection 
RightBackDoor_Check	后门右门禁	Rear Door Right Access Control 
RightCameraName	入口相机名称	LP Camera Name 
RightCar_Check	进料口料车检测	LP Trolley Detection 
RightEnd_Check	进料口料串到位检测	LP Stacker Ready Detection 
RightFornt_Check	进料口前端料串检测	LP Stacker In Position Detection 
RightMoto_Reverse	进料口电机反转指令	LP Motor Reverse Command 
RightMoto_Run	进料口电机启动	LP Motor Start 
RightOverHead_Check	进料定位料盘超限检测	Loading Reel Overlimit Detection
RightState_Led	进料口状态指示灯	LP Status Indicator 
RightStopDown	进料口阻挡气缸下降端	LP Stopper Cylinder Down End 
RightStopUP	进料口阻挡气缸上升端	LP Stopper Cylinder Up End 
RightTop_Check	进料定位料盘检测	Load Positioning Reel Detection 
RunSign_HddLed	待机指示灯	Standby Indicator 
Sucker_Clamp	吸盘吸料	Vacumm Gripper Get Material
Sucker_Release	吸盘放料	Vacumm Gripper Release Material
SuddenStop_BTN	急停	E-Stop 
Take_Middle_Axis	取料旋转轴	Picking(P) Rotation Axis 
Take_Middle_P1	取料旋转轴待机点P1	P Rotation Axis Standby Point P1 
Take_Middle_P2	取料旋转轴右取料点P2	P Rotation Axis Right Picking Point P2 
Take_Middle_P3	取料旋转轴左取料点P3	P Rotation Axis Left Picking Point P3 
Take_Middle_P5	取料旋转轴NG放料点P5	P Rotation Axis NG Unload Point P5 
Take_UpDown_Axis	取料升降轴	Picking(P) Lift Axis 
Take_UpDown_P1	取料升降轴待机点P1	P Lift Axis Standby Point P1 
Take_UpDown_P2	取料升降轴取料高点P2	P Lift Axis Picking High Point P2 
Take_UpDown_P3	取料升降轴取右料低点P3	P Lift Axis Right Picking Low Point P3 
Take_UpDown_P4	取料升降轴取左料低点P4	P Lift Axis Left Picking Low Point P4 
Take_UpDown_P5	取料升降轴NG放料点P5	P Lift Axis NG Unload Point P5
TraySize_13	13寸料盘检测	13-Inch Reel Detection 
TraySize_15	15寸料盘检测	15-Inch Reel Detection 
TraySize_7	吸盘压力检测	Vacumm Stress Detection
Res0001	关于 {0}	About {0} 
Res0001.b9534cf3	...清除报警1	Clear Alarm1
Res0002	版本 {0}	Version {0} 
Res0002.99b78abc	...清除报警2	Clear Alarm2
Res0003	信息	Message 
Res0004	时间	Time 
Res0005	模块	Module 
Res0006	步骤	Step 
Res0007	日志	Log 
Res0008	IO调试	IO Diagnostic
Res0008.226d8802	...使能成功	... Enable Succeed
Res0009	伺服调试	Servo Config.
Res0010	相关设置	Related Settings 
Res0011	配置模式	Enable Config Mode 
Res0012	停用配置模式	Disable Config Mode 
Res0012.ebec6459	...尝试使能失败	... Enable Failed
Res0013	暂停运行	Pause Execution 
Res0014	恢复运行	Resume Execution 
Res0015	启动	Start
Res0016	重置	Reset
Res0017	扫码还没完成,无法打开调试!请稍后再试.	Waiting For Scan Completion To Do Config.
Res0018	料串已是释放状态	Reel Already Released 
Res0018.7f6dfad7	...伺服连接中	
Res0019	正在执行料串释放	Reel Releasing 
Res0020	出口料串正在提升或下降, 不能释放	UP Stacker Movement，Releasing is Not Allowed.
Res0021	出口料串等待释放中({0})	Waiting For Release {0} 
Res0022	安全释放出口料串	Safely Release UP Stacker
Res0023	入口料串当前没有就位, 不能释放	LP Stacker is Not In Position, Releasing is Not Allowed.
Res0024	入口料串等待释放中({0})	Awaiting Release ({0}) 
Res0025	安全释放入口料串	Safely Release The LP Stacker 
Res0026	入口料串正在运行,不能手动上料	LP Stacker is Running, Manual Loading is Not Allowed 
Res0027	没有检测到料串,不能手动上料	No Stacker Detected, Manual Loading is Not Allowed.
Res0028	出口料串正在运行,不能手动上料	UP Stacker is Running, Manual Loading is Not Allowed
Res0029	点位列表	Poisition List 
Res0030	全部保存	Save All 
Res0031	添加	Add 
Res0032	修改	Edit 
Res0032.1bf30741	第{0}次尝试打开轴:{1}	Try To Enable Axis: {1} For {0} Times
Res0033	确定要删除:\"{0}\"?	Confirm Deletion:\"{0}\"?
Res0033.814c87d5	...伺服忙碌,急停{0}次	... Servo Busy, EM Stop {0} Times
Res0034	警告	Caution
Res0035	已呼叫AGV，不能重复呼叫	AGV Alreay Called. Cannot Repeat
Res0036	移载	Transfer Unit
Res0037	温湿度传感器[	Temperature And Humidity Sensor
Res0038	本机IP:[	Local IP: 
Res0039	入料口	LP
Res0040	出口空闲中	UP Available
Res0041	本机IP	Local IP
Res0042	移栽	Remove 
Res0043	料串已满	Stacker is Full 
Res0044	已使用	Already Used 
Res0045	当前ReelID:	Current Reel ID: 
Res0046	无料串	No Stacker
Res0047	抓料失败请手动处理,请将料盘放入:NG箱,按入口按钮继续	Loading Failed, Please Putting The Reel Into The NG Box And Press LP Button .
Res0048	抓料失败请手动处理,请将料盘放入: 出口料串,按入口按钮继续	Loading Failed, Please Puting Stacker And Press The LP Button.
Res0049	等待出口允许放料	Wait For UP Release
Res0050	等待吸盘放松	Waiting Sucker  Released
Res0051	出料口	UP
Res0052	贴标	Relabel
Res0053	重置	Reset
Res0054	可能与贴标Y轴干涉	Possible Label Interference Y-Axis
Res0055	可能与旋转轴干涉	Possible Rotational Axis Interference
Res0056	可能与贴标Z轴干涉	Possible Label Interference Z-Axis
Res0057	用户暂停	User Paused
Res0058	安全光栅被遮挡	Safety Light Curtain Blocked
Res0059	入口料串已空,等待取走料串	LP Stacker Empty, Awaiting Remove
Res0060	出口料串已满,等待取走料串	UP Stacker Full, Awaiting Remove 
Res0061	[已忽略]	Ignored
Res0062	没有检测到NG料箱	No NG Bin Detected 
Res0063	没有检测打印机	No Printer Detected 
Res0064	左后门没有关闭	Left Rear Door Not Closed 
Res0065	右后门没有关闭	Right Rear Door Not Closed 
Res0066	急停中	E-Stop 
Res0067	系统需要重置	Activated System Requires Reset
Res0068	气压不足	Insufficient Air Pressure 
Res0069	有料串,已放置{0}张料盘	Stacker Loaded, {0} Reels Placed 
Res0070	AGV调试	AGV Config.
Res0071	任务状态	Task Status
Res0072	标签已打印,当前ReelID:	Label Printed, Current Reel ID: 
Res0073	等待标签打印	Waiting For Label Printing 
Res0074	等待中	Awaiting 
Res0075	任务编号:	Task ID:
Res0076	运行编号:	Running ID:
Res0077	任务状态:	Task Status:
Res0078	运行结果:	Task Result:
Res0079	机器尚未启动不能呼叫AGV	Machine Not Started. Cannot Call AGV
Res0080	当前有料串不能请求进入料串	Cannot Request Importing Current Stacker 
Res0081	当前没有料串不能请求取料串	Cannot Request Stacker Due To No Stacker , 
Res0082	机器尚在运行,不能退出,请先停止运行.	Cannot Request Stacker Retrieval Machine In Operation, 
Res0083	左侧料串正在提升或下降,不能释放	UP Stacker Movement, Unable to Release
Res0084	左侧料串等待释放中({0})	UP Stacker is Awaiting Release ({0}) 
Res0085	安全释放左侧料串	UP Stacker Safety Release
Res0086	右侧料串当前没有就位, 不能释放	LP Stacker Not Ready, Unable to Release
Res0087	右侧料串等待释放中({0})	LP Stacker is Awaiting Release ({0}) 
Res0088	安全释放右侧料串	LP Stacker Safety Release
Res0089	右侧料串正在运行,不能手动上料	LP Stacker Operating, Manual Loading is Not Allowed.
Res0090	左侧料串正在运行,不能手动上料	UP Stacker Operating, Manual Loading is Not Allowed.
Res0091	请确认是否运动到该位置	Confirm Movement To This Position
Res0092	确定要删除:\"{0}\"?	Deletion: "{0}"? 
Res0093	右侧料串已空,等待取走料串	LP Stacker Empty, Awaiting Remove 
Res0094	左侧料串已满,等待取走料串	UP Stacker Full, Awaiting Remove 
Res0095	左侧空闲中	UP Available
Res0096	抓料失败请手动处理,请将料盘放入:NG箱,按右侧按钮继续	Loading Failed, Please Handle It Manually: Place Reel In NG Box And Press Right Button.
Res0097	抓料失败请手动处理,请将料盘放入: 左侧料串,按右侧按钮继续	Loading Failed, Please Handle It Manually: Place Reel In UP Stacker And Press Right Button
Res0098	等待左侧允许放料	Waiting For UP Available
Res0099	等待料盘取走	Waiting For Reel Removal 
Res0100	,料串已清空.	Stacker Empty 
Res0101	配置模式	Config. Mode
Res0102	吸盘夹紧	Tighten Vacumm Gripper
Res0103	吸盘放松	Release Vacumm Gripper
Res0104	等待	Waiting
Res0105	超时	Time Out
Res0106	秒	Second
Res0107.d1e28be6	AGV任务	AGV Task
Res0108.164140b2	状态更新	Update State
Res0109.d647c69c	入料口正在进料	LP Loading
Res0110.97f61551	入料口正在出料	LP Unloading
Res0111.bb763c9e	任务类型	Task Type
Res0112.caa9d6a0	不允许使用该操作	This Operation is Not Allowed.
Res0113.15f652b4	出料口正在入料	UP Loading
Res0114.b6a35f01	出料口正在出料	UP Unloading
Res0115.75a1fac5	折叠门开门信号未亮，不允许上料	No Door Open Signal, Loading Prohibited
Res0116.23d7e98f	折叠门开门信号未亮，不允许下料	No Door Open Signal, Unloading Prohibited
Res0117.2bf5c941	打开轴	Turn On Axis
Res0118.33d2a704	失败 	Failed
Res0119.cbd5d752	清理报警，	Clearing The Alarm.
Res0120.405c5a9e	,收到原点完成信号，当前位置[	Received Origin Completion Signal, Current Position [
Res0121.6658614e	]，误差过大，需要报警	], Deviation Too Large, Alarm Needed
Res0122.62c858d3	标签取起失败!	Failed To Retrieve Label
Res0123.d86f0192	有料串,已提取{0}张料盘	Have Stacker, {0} Retrived 
Res0124.84e7c741	批量轴上升到上料点	Batch Axis Rises To Loading Point
Res0125.ed4de1c6	扫码完成	Scan Completed
Res0126.f11b67ff	标签打印机打开失败	Label Printer Startup Failure
Res0127.a5affabf	设备未启动	Machine Not Started
Res0128.e5d9ef10	模版匹配失败	Template Matching Failure
Res0129.0e13d0de	标签打印失败,请检查打印机状态,关门后将自动重试	Label printing failure.Please check the status. Will automatically retry after closing the door
Res0130.c3836615	标签吸取失败,请检查,关门后将自动重试	Label sucking failed, please check, will automatically retry after closing the door
Res0131.df796d2d	运动报警	Motion Alarm
Res0188	电夹爪通讯失败:{0}	Eletric Gripper Communication Failure:{0}
Res0189	IO板卡初始化失败	IO Card Failed To Initialize.
Res0190	打开配置模式	Turn On Configuration Modo 
Res0192	吸盘夹紧	Vacumm Gripper Tightened
Res0193	吸盘放松	Vacumm Gripper Released
Res0194	请先选择运动轴	Please Select a Motion Axis First
Res0195	警告 	Warning
Res0196	点动+ 	Jogging+
Res0197	点动- 	Jogging-
Res0198	提示	Remind
Res0199	请先输入正确的速度	Please Enter The Correct Speed.
Res0200	状态监控	Condition Monitoring
Res0201	错误码：	Error Code:
Res0202	伺服尚未使能	Servo is Disabled.
Res0203	伺服警报状态中	Servo in Alarm State
Res0204	无法操作	Unable To Operate
Res0216	打印机	Printer
Res0217	标签打印机打开失败	Turn On Label Printer Failure
Res0218	有料串,已提取{0}张料盘	Have Stacker, {0} Reels In Place.
Res0219	版权 ©  2021	Copyright ©  2021
Res0220	最后更新时间:	Last Update:
Res0221	未检测到打印标签	No printed labels detected
Res0222	贴标时未检测到打印标签	Labels Not Detected During Relabeling
Res0223	未知数	Unknow
Res0224	上一个标签尚未移走	Previous Label Not Removed