Skip to content

张东亮 / SO1057-XLRStore

转到一个项目
切换导航栏
切换导航栏固定状态
Commit ae723b5b 由 张东亮
选项

优化

1 个父辈 66be7140
内嵌 并排
正在显示 3 个修改的文件 包含 65 行增加 和 47 行删除
source/DeviceLibrary/manager/SServerManager.cs
...@@ -629,7 +629,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -629,7 +629,7 @@ namespace OnlineStore.DeviceLibrary
try try
{ {
Dictionary<string, string> paramMap = new Dictionary<string, string>(); Dictionary<string, string> paramMap = new Dictionary<string, string>();
paramMap.Add("cids", StoreManager.Config.CID); paramMap.Add("cid", StoreManager.Config.CID);
paramMap.Add("hSerial", hSerial); paramMap.Add("hSerial", hSerial);
string server = GetAddr("/service/store/outTaskCount", paramMap); string server = GetAddr("/service/store/outTaskCount", paramMap);
......
source/DeviceLibrary/storeBean/boxBean/BoxEquip_ConnectServerTimer.cs
...@@ -60,7 +60,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -60,7 +60,7 @@ namespace OnlineStore.DeviceLibrary
SendLineStatus(); SendLineStatus();
HttpHelper.Post<DoorInfo>(HttpHelper.GetPostApi("/api/xlc/updateDoorInfo"), StoreManager.XLRStore.inputEquip.BatchMove_A.doorInfo); HttpHelper.Post<DoorInfo>(HttpHelper.GetPostApi("/api/xlc/updateDoorInfo"), StoreManager.XLRStore.inputEquip.BatchMove_A.doorInfo);
HttpHelper.Post<DoorInfo>(HttpHelper.GetPostApi("/api/xlc/updateDoorInfo"), StoreManager.XLRStore.inputEquip.BatchMove_B.doorInfo); HttpHelper.Post<DoorInfo>(HttpHelper.GetPostApi("/api/xlc/updateDoorInfo"), StoreManager.XLRStore.inputEquip.BatchMove_B.doorInfo);
} }
} }
} }
...@@ -76,8 +76,12 @@ namespace OnlineStore.DeviceLibrary ...@@ -76,8 +76,12 @@ namespace OnlineStore.DeviceLibrary
public void SendStoreState(string posid, DeviceStatus storeStatus) public void SendStoreState(string posid, DeviceStatus storeStatus)
{ {
Operation operation = getLineBoxStatus(); Operation operation = getLineBoxStatus();
if (!string.IsNullOrEmpty(posid)) if (!string.IsNullOrEmpty(posid) && !operation.boxStatus[1].data.ContainsKey(ParamDefine.posId))
operation.boxStatus[1].data.Add(ParamDefine.posId, posid); operation.boxStatus[1].data.Add(ParamDefine.posId, posid);
else if (!string.IsNullOrEmpty(posid) && operation.boxStatus[1].data.ContainsKey(ParamDefine.posId))
{
operation.boxStatus[1].data[ParamDefine.posId] = posid;
}
LogUtil.info($"SendStoreState,posid:{posid}, storeStatus:{storeStatus}"); LogUtil.info($"SendStoreState,posid:{posid}, storeStatus:{storeStatus}");
operation.boxStatus[1].status = (int)storeStatus; operation.boxStatus[1].status = (int)storeStatus;
...@@ -127,26 +131,26 @@ namespace OnlineStore.DeviceLibrary ...@@ -127,26 +131,26 @@ namespace OnlineStore.DeviceLibrary
else if (runStatus.Equals(DeviceStatus.OutStoreBoxEnd) || runStatus.Equals(DeviceStatus.InStoreEnd)) else if (runStatus.Equals(DeviceStatus.OutStoreBoxEnd) || runStatus.Equals(DeviceStatus.InStoreEnd))
{ {
boxStatus.data.Add(ParamDefine.posId, lastPosId); boxStatus.data.Add(ParamDefine.posId, lastPosId);
boxStatus.data.Add(ParamDefine.barcode,lastBarcode); boxStatus.data.Add(ParamDefine.barcode, lastBarcode);
boxStatus.data.Add(ParamDefine.executeTime, executeTime); boxStatus.data.Add(ParamDefine.executeTime, executeTime);
} }
else if (!lastPosId.Equals("")) else if (!lastPosId.Equals(""))
{ {
boxStatus.data.Add(ParamDefine.posId, lastPosId); boxStatus.data.Add(ParamDefine.posId, lastPosId);
boxStatus.data.Add(ParamDefine.barcode, lastBarcode); boxStatus.data.Add(ParamDefine.barcode, lastBarcode);
boxStatus.data.Add(ParamDefine.executeTime,executeTime); boxStatus.data.Add(ParamDefine.executeTime, executeTime);
boxStatus.status = (int)deviceStatus; boxStatus.status = (int)deviceStatus;
if (lastPosId != "") if (lastPosId != "")
{ {
LogUtil.info("给服务器发送出入库消息：" + Name + ",status【" + deviceStatus + "】posId【" + lastPosId + "】barcode【"+lastBarcode+"】"); LogUtil.info("给服务器发送出入库消息：" + Name + ",status【" + deviceStatus + "】posId【" + lastPosId + "】barcode【" + lastBarcode + "】");
} }
lastPosId = ""; lastPosId = "";
lastBarcode = ""; lastBarcode = "";
} }
if (MoveInfo.MoveType.Equals(MoveType.InStore)||MoveInfo.MoveType.Equals(MoveType.OutStore)) if (MoveInfo.MoveType.Equals(MoveType.InStore) || MoveInfo.MoveType.Equals(MoveType.OutStore))
{ {
if ((MoveInfo.MoveParam != null)&&( MoveInfo.MoveParam.PosInfo!=null)) if ((MoveInfo.MoveParam != null) && (MoveInfo.MoveParam.PosInfo != null))
{ {
if (!boxStatus.data.ContainsKey(ParamDefine.posId)) if (!boxStatus.data.ContainsKey(ParamDefine.posId))
{ {
...@@ -186,14 +190,14 @@ namespace OnlineStore.DeviceLibrary ...@@ -186,14 +190,14 @@ namespace OnlineStore.DeviceLibrary
vals.Add("humidity", humitureParams[i].Humidity.ToString()); vals.Add("humidity", humitureParams[i].Humidity.ToString());
vals.Add("temperature", humitureParams[i].Temperate.ToString()); vals.Add("temperature", humitureParams[i].Temperate.ToString());
valuePairs.Add(vals); valuePairs.Add(vals);
} }
boxStatus.data.Add(ParamDefine.humiAndtempList, JsonHelper.SerializeObject(valuePairs)); boxStatus.data.Add(ParamDefine.humiAndtempList, JsonHelper.SerializeObject(valuePairs));
//LogUtil.info($"上报温湿度数据【{JsonHelper.SerializeObject(valuePairs)}】【{JsonHelper.SerializeObject(boxStatus.data)}】"); //LogUtil.info($"上报温湿度数据【{JsonHelper.SerializeObject(valuePairs)}】【{JsonHelper.SerializeObject(boxStatus.data)}】");
} }
} }
catch(Exception ex) catch (Exception ex)
{ {
LogUtil.error("上报温湿度数据异常",ex); LogUtil.error("上报温湿度数据异常", ex);
} }
return lineOperation; return lineOperation;
} }
...@@ -278,7 +282,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -278,7 +282,7 @@ namespace OnlineStore.DeviceLibrary
} }
else if (resultOperation.op.Equals(1)) else if (resultOperation.op.Equals(1))
{ {
LogUtil.info(logName + " 成功"+$"【{JsonHelper.SerializeObject(resultOperation)}】"); LogUtil.info(logName + " 成功" + $"【{JsonHelper.SerializeObject(resultOperation)}】");
return true; return true;
} }
else else
...@@ -360,8 +364,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -360,8 +364,8 @@ namespace OnlineStore.DeviceLibrary
try try
{ {
//判断是否接收过此库位的出库信息 //判断是否接收过此库位的出库信息
if (MoveInfo.MoveType.Equals(MoveType.OutStore) && (MoveInfo.MoveParam.PosInfo.PosId.Equals(posId)|| if (MoveInfo.MoveType.Equals(MoveType.OutStore) && (MoveInfo.MoveParam.PosInfo.PosId.Equals(posId) ||
(MoveInfo.MoveParam.PosInfoBack !=null && MoveInfo.MoveParam.PosInfoBack.PosId.Equals(posId)))) (MoveInfo.MoveParam.PosInfoBack != null && MoveInfo.MoveParam.PosInfoBack.PosId.Equals(posId))))
{ {
LogUtil.error(Name + " 出库命令【" + inoutParam.PosInfo.ToStr() + "】重复，正在【" + posId + "】出库中"); LogUtil.error(Name + " 出库命令【" + inoutParam.PosInfo.ToStr() + "】重复，正在【" + posId + "】出库中");
continue; continue;
......
source/DeviceLibrary/storeBean/inputBean/BatchMoveBean_Partial.cs
...@@ -44,7 +44,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -44,7 +44,7 @@ namespace OnlineStore.DeviceLibrary
if (AgvClient.GetAction(Config.AgvName) == ClientAction.NeedLeave || AgvClient.GetAction(Config.AgvName) == ClientAction.MayLeave) if (AgvClient.GetAction(Config.AgvName) == ClientAction.NeedLeave || AgvClient.GetAction(Config.AgvName) == ClientAction.MayLeave)
{ {
//WorkLog("料串入料 ：等待AGV来取空料串1"); //WorkLog("料串入料 ：等待AGV来取空料串1");
return false; return false;
} }
UpdateShelf(1); UpdateShelf(1);
if (CurrShelf.ShelfState.Equals(3)) if (CurrShelf.ShelfState.Equals(3))
...@@ -59,12 +59,12 @@ namespace OnlineStore.DeviceLibrary ...@@ -59,12 +59,12 @@ namespace OnlineStore.DeviceLibrary
return false; return false;
} }
else if (Robot.IOValue(Config.IO_LineIn_Check).Equals(IO_VALUE.HIGH) ) else if (Robot.IOValue(Config.IO_LineIn_Check).Equals(IO_VALUE.HIGH))
{ {
MoveInfo.NewMove(MoveType.InStore,new InOutParam()); MoveInfo.NewMove(MoveType.InStore, new InOutParam());
IB03_LineStart(); IB03_LineStart();
} }
else if(Robot.IOValue(Config.IO_LineEnd_Check).Equals(IO_VALUE.HIGH)) else if (Robot.IOValue(Config.IO_LineEnd_Check).Equals(IO_VALUE.HIGH))
{ {
MoveInfo.NewMove(MoveType.InStore, new InOutParam()); MoveInfo.NewMove(MoveType.InStore, new InOutParam());
IB04_LineWait(); IB04_LineWait();
...@@ -96,7 +96,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -96,7 +96,7 @@ namespace OnlineStore.DeviceLibrary
WorkLog("定位工位检测到料串： 链条停止，阻挡气缸上升"); WorkLog("定位工位检测到料串： 链条停止，阻挡气缸上升");
LineStop(); LineStop();
StopUp(MoveInfo); StopUp(MoveInfo);
// MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(3000)); // MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(3000));
} }
private void IB02_BatchAxisToP1() private void IB02_BatchAxisToP1()
{ {
...@@ -109,7 +109,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -109,7 +109,7 @@ namespace OnlineStore.DeviceLibrary
{ {
WorkLog("料串入料 ：入口有料串，转动料串到位"); WorkLog("料串入料 ：入口有料串，转动料串到位");
MoveInfo.NextMoveStep(StepEnum.IB03_LineStart); MoveInfo.NextMoveStep(StepEnum.IB03_LineStart);
LineRun(MoveInfo); LineRun(MoveInfo);
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(Config.IO_LineIn_Check, IO_VALUE.LOW)); MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(Config.IO_LineIn_Check, IO_VALUE.LOW));
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(Config.IO_LineEnd_Check, IO_VALUE.HIGH)); MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(Config.IO_LineEnd_Check, IO_VALUE.HIGH));
} }
...@@ -222,7 +222,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -222,7 +222,8 @@ namespace OnlineStore.DeviceLibrary
else if (MoveInfo.IsStep(StepEnum.IB07_AxisUpMove)) else if (MoveInfo.IsStep(StepEnum.IB07_AxisUpMove))
{ {
CheckHasTray(); CheckHasTray();
}else if (MoveInfo.IsStep(StepEnum.IB08_BatchAxisToP4)) }
else if (MoveInfo.IsStep(StepEnum.IB08_BatchAxisToP4))
{ {
if (Robot.AxisIsInShelfUp(ShelfType)) if (Robot.AxisIsInShelfUp(ShelfType))
{ {
...@@ -244,7 +245,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -244,7 +245,7 @@ namespace OnlineStore.DeviceLibrary
else if (MoveInfo.IsTimeOut(10)) else if (MoveInfo.IsTimeOut(10))
{ {
WarnMsg = Name + "[" + MoveInfo.MoveStep + "] " + "等待旋转轴离开料串超时" + "[" + FormUtil.GetSpanStr(MoveInfo.StepSpan()) + "]"; WarnMsg = Name + "[" + MoveInfo.MoveStep + "] " + "等待旋转轴离开料串超时" + "[" + FormUtil.GetSpanStr(MoveInfo.StepSpan()) + "]";
} }
} }
else if (MoveInfo.IsStep(StepEnum.IB11_ScanCode)) else if (MoveInfo.IsStep(StepEnum.IB11_ScanCode))
{ {
...@@ -275,8 +276,9 @@ namespace OnlineStore.DeviceLibrary ...@@ -275,8 +276,9 @@ namespace OnlineStore.DeviceLibrary
var span = DateTime.Now - MoveInfo.LastSetpTime; var span = DateTime.Now - MoveInfo.LastSetpTime;
WorkLog("料串入料 ：扫码结束【" + code + "】，等待取料机构来取料," + MoveInfo.MoveParam.PosInfo.ToStr()); WorkLog("料串入料 ：扫码结束【" + code + "】，等待取料机构来取料," + MoveInfo.MoveParam.PosInfo.ToStr());
} }
}else if (MoveInfo.IsStep(StepEnum.IB12_BatchAxisToReelPosition)) }
else if (MoveInfo.IsStep(StepEnum.IB12_BatchAxisToReelPosition))
{ {
string code = CodeManager.ProcessCode(LastCodeList); string code = CodeManager.ProcessCode(LastCodeList);
MoveInfo.NextMoveStep(StepEnum.IB13_ScanOK); MoveInfo.NextMoveStep(StepEnum.IB13_ScanOK);
...@@ -397,7 +399,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -397,7 +399,7 @@ namespace OnlineStore.DeviceLibrary
{ {
LastCodeList = CodeManager.CameraScan(Config.CameraName, Name); LastCodeList = CodeManager.CameraScan(Config.CameraName, Name);
} }
// Robot.IOMove(IO_Type.CameraLed, IO_VALUE.LOW); // Robot.IOMove(IO_Type.CameraLed, IO_VALUE.LOW);
//TODO 需要判断是否和上次的条码重复，重复的条码不可用 //TODO 需要判断是否和上次的条码重复，重复的条码不可用
bool isCanUse = true; bool isCanUse = true;
...@@ -442,22 +444,22 @@ namespace OnlineStore.DeviceLibrary ...@@ -442,22 +444,22 @@ namespace OnlineStore.DeviceLibrary
{ {
toBatchP4 = false; toBatchP4 = false;
//判断扫码点是否可用，可用，运动到扫码点 //判断扫码点是否可用，可用，运动到扫码点
int currP = BatchAxis.GetAclPosition(); int currP = BatchAxis.GetAclPosition();
int targetPosition = currP + Config.BatchAxisP4; int targetPosition = currP + Config.BatchAxisP4;
if (Config.BatchAxisP4 > 0 &&(targetPosition<Config.BatchAxisP2 )) if (Config.BatchAxisP4 > 0 && (targetPosition < Config.BatchAxisP2))
{ {
batchAxisReelPosition = currP; batchAxisReelPosition = currP;
toBatchP4 = true; toBatchP4 = true;
MoveInfo.NextMoveStep(StepEnum.IB08_BatchAxisToP4); MoveInfo.NextMoveStep(StepEnum.IB08_BatchAxisToP4);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(500)); MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(500));
BatchAxis.AbsMove(MoveInfo, targetPosition, Robot.Config.BatchAxis_P4Speed); BatchAxis.AbsMove(MoveInfo, targetPosition, Robot.Config.BatchAxis_P4Speed);
WorkLog("料盘已到位，批量轴当前位置【"+currP+ "】，扫码上升高度P4【" + Config.BatchAxisP4+"】可用，批量轴走到扫码点【"+ targetPosition + "】"); WorkLog("料盘已到位，批量轴当前位置【" + currP + "】，扫码上升高度P4【" + Config.BatchAxisP4 + "】可用，批量轴走到扫码点【" + targetPosition + "】");
} }
else else
{ {
LogUtil.info(Name + "料盘已到位，批量轴当前位置【" + currP + "】扫码上升高度P4【" + Config.BatchAxisP4 + "】扫码点【" + targetPosition + "】P2【"+ Config.BatchAxisP2 + "】,可直接扫码"); LogUtil.info(Name + "料盘已到位，批量轴当前位置【" + currP + "】扫码上升高度P4【" + Config.BatchAxisP4 + "】扫码点【" + targetPosition + "】P2【" + Config.BatchAxisP2 + "】,可直接扫码");
if (Robot.AxisIsInShelfUp(ShelfType)) if (Robot.AxisIsInShelfUp(ShelfType))
{ {
MoveInfo.NextMoveStep(StepEnum.IB09_WaitCanScan); MoveInfo.NextMoveStep(StepEnum.IB09_WaitCanScan);
...@@ -468,7 +470,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -468,7 +470,7 @@ namespace OnlineStore.DeviceLibrary
{ {
IB11_ScanCode(); IB11_ScanCode();
} }
} }
} }
else else
{ {
...@@ -493,7 +495,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -493,7 +495,7 @@ namespace OnlineStore.DeviceLibrary
} }
private void SendInShelfLeave(string msg = "") private void SendInShelfLeave(string msg = "")
{ {
WorkLog(" SendInShelfLeave :" + msg+",清空条码"); WorkLog(" SendInShelfLeave :" + msg + ",清空条码");
LastCodeList = new List<string>(); LastCodeList = new List<string>();
preCodeList = new List<string>(); preCodeList = new List<string>();
bool needLeave = true; bool needLeave = true;
...@@ -502,7 +504,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -502,7 +504,7 @@ namespace OnlineStore.DeviceLibrary
{ {
needLeave = false; needLeave = false;
} }
else if (ShelfType.Equals(1) && Robot.BatchMove_B.ShelfIsOut()) else if (ShelfType.Equals(1) && Robot.BatchMove_B.ShelfIsOut())
{ {
needLeave = true; needLeave = true;
} }
...@@ -636,9 +638,16 @@ namespace OnlineStore.DeviceLibrary ...@@ -636,9 +638,16 @@ namespace OnlineStore.DeviceLibrary
} }
else else
{ {
doorInfo.status = doorStatusE.outStore; //if (SServerManager.GetOutTaskCount(MoveInfo.MoveParam.PosInfo.hSerial) == 0)
MoveInfo.NextMoveStep(StepEnum.IS11_ShelfReady); //{
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000)); // SendOutShelfLeave("检测到工单已结束:" + MoveInfo.MoveParam.PosInfo.hSerial);
//}
//else
{
doorInfo.status = doorStatusE.outStore;
MoveInfo.NextMoveStep(StepEnum.IS11_ShelfReady);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000));
}
} }
} }
else if (MoveInfo.IsStep(StepEnum.IS12_AxisDown)) else if (MoveInfo.IsStep(StepEnum.IS12_AxisDown))
...@@ -684,12 +693,16 @@ namespace OnlineStore.DeviceLibrary ...@@ -684,12 +693,16 @@ namespace OnlineStore.DeviceLibrary
//MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(60000)); //MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(60000));
//MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(Config.IO_LineIn_Check, IO_VALUE.LOW)); //MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(Config.IO_LineIn_Check, IO_VALUE.LOW));
} }
else if (MoveInfo.IsStep(StepEnum.IS23_WaitAgv)) { else if (MoveInfo.IsStep(StepEnum.IS23_WaitAgv))
if (Robot.IOValue(Config.IO_AGV_RequestOut).Equals(IO_VALUE.HIGH)) { {
if (Robot.IOValue(Config.IO_AGV_RequestOut).Equals(IO_VALUE.HIGH))
{
MoveInfo.NextMoveStep(StepEnum.IS24_ShelfOut); MoveInfo.NextMoveStep(StepEnum.IS24_ShelfOut);
WorkLog("收到AGV抵达信号"); WorkLog("收到AGV抵达信号");
ShelfOutProcess("", CurrShelf.ShelfRfid); ShelfOutProcess("", CurrShelf.ShelfRfid);
}else if (Robot.IOValue(Config.IO_LineEnd_Check).Equals(IO_VALUE.LOW)) { }
else if (Robot.IOValue(Config.IO_LineEnd_Check).Equals(IO_VALUE.LOW))
{
MoveInfo.NextMoveStep(StepEnum.IS24_ShelfOut); MoveInfo.NextMoveStep(StepEnum.IS24_ShelfOut);
WorkLog("料串已离开"); WorkLog("料串已离开");
} }
...@@ -738,9 +751,9 @@ namespace OnlineStore.DeviceLibrary ...@@ -738,9 +751,9 @@ namespace OnlineStore.DeviceLibrary
} }
internal void ReelPutOk() internal void ReelPutOk()
{ {
if (MoveInfo.MoveType.Equals(MoveType.OutStore) && MoveInfo.IsStep(StepEnum.IS13_WaitReel)) if (MoveInfo.MoveType.Equals(MoveType.OutStore) && MoveInfo.IsStep(StepEnum.IS13_WaitReel))
{ {
MoveInfo.NextMoveStep(StepEnum.IS14_ReelOK); MoveInfo.NextMoveStep(StepEnum.IS14_ReelOK);
WorkLog($"出库{MoveInfo.SLog} 放料完成"); WorkLog($"出库{MoveInfo.SLog} 放料完成");
...@@ -748,7 +761,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -748,7 +761,8 @@ namespace OnlineStore.DeviceLibrary
{ {
SendOutShelfLeave("工单已结束:" + MoveInfo.MoveParam.PosInfo.hSerial); SendOutShelfLeave("工单已结束:" + MoveInfo.MoveParam.PosInfo.hSerial);
}else }
else
CheckShelfIsFull(); CheckShelfIsFull();
} }
else else
...@@ -777,7 +791,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -777,7 +791,7 @@ namespace OnlineStore.DeviceLibrary
} }
else else
{ {
SendOutShelfLeave("料串出满需离开(信号到位)"); SendOutShelfLeave("料串出满需离开(信号到位)");
} }
} }
else if (MoveInfo.IsStep(StepEnum.IB07_AxisUpMove)) else if (MoveInfo.IsStep(StepEnum.IB07_AxisUpMove))
...@@ -851,11 +865,11 @@ namespace OnlineStore.DeviceLibrary ...@@ -851,11 +865,11 @@ namespace OnlineStore.DeviceLibrary
if (!result) if (!result)
{ {
LogUtil.error(logName + $" 等待{ Config.IO_LineIn_Check}=High 超时， 等待 {Config.IO_LineEnd_Check } 信号"); LogUtil.error(logName + $" 等待{Config.IO_LineIn_Check}=High 超时， 等待 {Config.IO_LineEnd_Check} 信号");
} }
else else
{ {
LogUtil.info(logName + $"已收到 {Config.IO_LineIn_Check}=High ， 等待 { Config.IO_LineEnd_Check} 信号"); LogUtil.info(logName + $"已收到 {Config.IO_LineIn_Check}=High ， 等待 {Config.IO_LineEnd_Check} 信号");
} }
result = Robot.WaitIo(Config.IO_LineEnd_Check, IO_VALUE.HIGH, 60000); result = Robot.WaitIo(Config.IO_LineEnd_Check, IO_VALUE.HIGH, 60000);
...@@ -926,7 +940,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -926,7 +940,7 @@ namespace OnlineStore.DeviceLibrary
bool result = Robot.WaitIo(Config.IO_LineIn_Check, IO_VALUE.LOW, 60000); bool result = Robot.WaitIo(Config.IO_LineIn_Check, IO_VALUE.LOW, 60000);
if (!result) if (!result)
{ {
LogUtil.error(logName + $" 等待 { Config.IO_LineIn_Check}=LOW超时，等待8000后停止转动，发送FinishLeave"); LogUtil.error(logName + $" 等待 {Config.IO_LineIn_Check}=LOW超时，等待8000后停止转动，发送FinishLeave");
} }
else else
{ {
...@@ -994,7 +1008,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -994,7 +1008,7 @@ namespace OnlineStore.DeviceLibrary
if (MoveInfo.MoveType.Equals(MoveType.InStore)) if (MoveInfo.MoveType.Equals(MoveType.InStore))
{ {
if (MoveInfo.IsStep(StepEnum.IB16_SaveHight)) if (MoveInfo.IsStep(StepEnum.IB16_SaveHight))
{ {
MoveInfo.NextMoveStep(StepEnum.IB17_WaitReelLeave); MoveInfo.NextMoveStep(StepEnum.IB17_WaitReelLeave);
WorkLog("当前料盘已离开,开始判断是否有下一盘，开始扫码"); WorkLog("当前料盘已离开,开始判断是否有下一盘，开始扫码");
LastHeight = 0; LastHeight = 0;
...@@ -1004,7 +1018,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -1004,7 +1018,7 @@ namespace OnlineStore.DeviceLibrary
{ {
LogUtil.error(Name + "当前状态：" + MoveInfo.MoveType + ",GetTrayLeave暂不处理"); LogUtil.error(Name + "当前状态：" + MoveInfo.MoveType + ",GetTrayLeave暂不处理");
} }
} }
private bool isFastLoad = true; private bool isFastLoad = true;
public bool UpdateShelf(int state = 0, string xnRfid = "") public bool UpdateShelf(int state = 0, string xnRfid = "")
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!