Skip to content

张东亮 / Qisda-SO1037-AGVDispatch

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 9d07df69 由 张东亮
选项

二期初版

1 个父辈 34d4da0b
全部展开
内嵌 并排
正在显示 33 个修改的文件 包含 537 行增加 和 267 行删除
AGVDispatch/App.config
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
</startup>
<appSettings>
<!--AGV系统标识：NEOTEL-1C,NEOTEL-3D,NEOTEL-3C,NEOTEL-4C,NEOTEL-4D-->
<add key="AppIdentity" value="NEOTEL" />
<!--ITS服务器-->
<add key="ITS" value="10.85.17.233" />
<!--AGV服务端口-->
<add key="WebService" value="http://127.0.0.1:8888" />
<!--云仓服务器端口-->
<add key="http.server" value="http://10.85.199.25/myproject/" />
<!--ITS智能物流系统服务端口-->
<add key="ITS_UpdateLine" value="http://10.85.17.233/ESMTCommonInterface/CommonService.asmx/" />
<!--电梯控制系统系统服务端口-->
<add key="Lift_Server" value="http://127.0.0.1:8887/lift/" />
<!--日志配置文件名-->
<add key="log4net_configname" value="log4net.config" />
<!--agv配置文件名-->
<add key="File_AgvInfo" value="agvinfos.xml" />
<!--agv任务配置文件名-->
<add key="File_AgvTaskInfo" value="taskinfos.xml" />
<!--点位配置文件名-->
<add key="File_NodeInfo" value="nodeinfos.xml" />
<!--使用到的电梯名配置名-->
<add key="Lift_Names" value="LIFT_D2,LIFT_C1" />
<!--充电最低/最高电量值-->
<add key="ChargeThreshold" value="20,90" />
<!--等待人员操作超时时间(分钟)-->
<add key="WaitTimeout" value="5" />
<!--停留超时异常上报时间（分钟）-->
<add key="StandTimeout" value="6" />
<!--Agv上下文信息文件名-->
<add key="FileName_AgvContext" value="AgvContext.json" />
</appSettings>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="log4net" publicKeyToken="669e0ddf0bb1aa2a" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.0.12.0" newVersion="2.0.12.0" />
</dependentAssembly>
</assemblyBinding>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="RestSharp" publicKeyToken="598062e77f915f75" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-106.11.4.0" newVersion="106.11.4.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<configSections>
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<connectionStrings>
<add name="AGVDataContext" connectionString="data source=.\Config\agv.db" providerName="System.Data.SQLite.EF6" />
</connectionStrings>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
</startup>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.LocalDbConnectionFactory, EntityFramework">
<parameters>
<parameter value="mssqllocaldb" />
</parameters>
</defaultConnectionFactory>
<providers>
<provider invariantName="System.Data.SQLite.EF6" type="System.Data.SQLite.EF6.SQLiteProviderServices, System.Data.SQLite.EF6" />
<provider invariantName="System.Data.SQLite" type="System.Data.SQLite.EF6.SQLiteProviderServices, System.Data.SQLite.EF6" />
</providers>
</entityFramework>
<system.data>
<DbProviderFactories>
<remove invariant="System.Data.SQLite.EF6" />
<add name="SQLite Data Provider" invariant="System.Data.SQLite" description=".Net Framework Data Provider for SQLite"
type="System.Data.SQLite.SQLiteFactory, System.Data.SQLite"/>
<add name="SQLite Data Provider (Entity Framework 6)" invariant="System.Data.SQLite.EF6"
description=".Net Framework Data Provider for SQLite (Entity Framework 6)"
type="System.Data.SQLite.EF6.SQLiteProviderFactory, System.Data.SQLite.EF6" />
</DbProviderFactories>
</system.data>
<appSettings>
<!--AGV系统标识：NEOTEL-1C,NEOTEL-3D,NEOTEL-3C,NEOTEL-4C,NEOTEL-4D-->
<add key="AppIdentity" value="NEOTEL" />
<!--ITS服务器-->
<add key="ITS" value="10.85.17.233" />
<!--AGV服务端口-->
<add key="WebService" value="http://127.0.0.1:8888" />
<!--云仓服务器端口-->
<add key="http.server" value="http://10.85.199.25/myproject/" />
<!--ITS智能物流系统服务端口-->
<add key="ITS_UpdateLine" value="http://10.85.17.233/ESMTCommonInterface/CommonService.asmx/" />
<!--电梯控制系统系统服务端口-->
<add key="Lift_Server" value="http://127.0.0.1:8887/lift/" />
<!--日志配置文件名-->
<add key="log4net_configname" value="log4net.config" />
<!--agv配置文件名-->
<add key="File_AgvInfo" value="agvinfos.xml" />
<!--agv任务配置文件名-->
<add key="File_AgvTaskInfo" value="taskinfos.xml" />
<!--点位配置文件名-->
<add key="File_NodeInfo" value="nodeinfos.xml" />
<!--使用到的电梯名配置名-->
<add key="Lift_Names" value="LIFT_D2,LIFT_C1" />
<!--充电最低/最高电量值-->
<add key="ChargeThreshold" value="20,90" />
<!--等待人员操作超时时间(分钟)-->
<add key="WaitTimeout" value="5" />
<!--停留超时异常上报时间（分钟）-->
<add key="StandTimeout" value="6" />
<!--Agv上下文信息文件名-->
<add key="FileName_AgvContext" value="AgvContext.json" />
<!--3D放置钢网的地方-->
<add key="SteelShelfPos" value="SteelShelfPos" />
</appSettings>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="log4net" publicKeyToken="669e0ddf0bb1aa2a" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.0.12.0" newVersion="2.0.12.0" />
</dependentAssembly>
</assemblyBinding>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="RestSharp" publicKeyToken="598062e77f915f75" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-106.11.4.0" newVersion="106.11.4.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
\ No newline at end of file
AGVDispatch/FrmMain.cs
......@@ -190,20 +190,10 @@ namespace AGVControl
{
LogUtil.logBox = this.richTextBox1;
}
}
private void button1_Click(object sender, EventArgs e)
{
//try
//{
// string missionId = textBox1.Text.Trim();
// MissionInfo missionInfo = MissionManager.GetMission(missionId);
// if(missionInfo != null)
// {
// MissionManager.DeleteById(missionId);
// }
//}
//catch { }
this.Invoke(new Action(() =>
{
DeviceLibrary.manager.MissionManager.UpdateDataSource(dgvInfos);
}));
}
private void dgvInfos_CellContentClick(object sender, DataGridViewCellEventArgs e)
......
AGVDispatch/Manual.cs
......@@ -83,12 +83,6 @@ namespace AGVControl
{
if (!chkBxAuto.Checked && !Agv.JobContext.MissionId.Equals(""))
{
//if (MessageBox.Show($"正在执行任务[{Agv.JobContext.MissionId}]，切到手动后该任务无法继续执行，确定切到手动状态？", "警告", MessageBoxButtons.YesNo).Equals(
// DialogResult.No))
//{
// chkBxAuto.Checked = true;
// return;
//}
LogUtil.info($"人员切换到手动，{Agv.Name}当前执行的任务为{Agv.JobContext.MissionId}");
}
btnReSendTask.Enabled = chkBxAuto.Checked;
......@@ -98,45 +92,44 @@ namespace AGVControl
{
Agv.Auto = false;
ChargePileManager.StopCharge(Agv);
if (Agv.IsCon)
LogUtil.info($"取消自动任务，当前运行信息是：{Agv.Msg}");
try
{
LogUtil.info($"取消自动任务，当前运行信息是：{Agv.Msg}");
try
//Agv.CurJob != null && Agv.CurJob.JobParam != null &&
if (Agv.CurJob.JobParam.GetMissionInfo() != null)
{
//Agv.CurJob != null && Agv.CurJob.JobParam != null &&
if (Agv.CurJob.JobParam.GetMissionInfo() != null)
if (MessageBox.Show($"是否删除该任务[{Agv.JobContext.MissionId}]？", "提示", MessageBoxButtons.YesNo).Equals(DialogResult.Yes))
{
if (MessageBox.Show($"是否删除该任务[{Agv.JobContext.MissionId}]？", "提示", MessageBoxButtons.YesNo).Equals(DialogResult.Yes))
DeviceLibrary.manager.MissionManager.SetMissionState(Agv.CurJob.JobParam.GetMissionInfo().missionId, DeviceLibrary.service.model.MissionState.中止, out string msg);
LogUtil.info($"{Agv.Name}取消自动任务，并终止当前任务：{Common.JsonHelper.SerializeObject(Agv.CurJob.JobParam.GetMissionInfo())}");
foreach (string item in Agv.Scope.Remark.Split(','))
{
DeviceLibrary.manager.MissionManager.SetMissionState(Agv.CurJob.JobParam.GetMissionInfo().missionId, DeviceLibrary.service.model.MissionState.中止, out string msg);
LogUtil.info($"{Agv.Name}取消自动任务，并终止当前任务：{Common.JsonHelper.SerializeObject(Agv.CurJob.JobParam.GetMissionInfo())}");
}
else
{
LogUtil.info($"{Agv.Name}取消自动任务，任务不中止：{Common.JsonHelper.SerializeObject(Agv.CurJob.JobParam.GetMissionInfo())}");
DeviceLibrary.lift.LiftContext.ResetLiftOccupiedAgv(item);
}
Agv.CurJob = null;
Agv.JobContext = new DeviceLibrary.bean.agv.JobContext();
}
else
{
LogUtil.info($"{Agv.Name}取消自动任务，任务不中止：{Common.JsonHelper.SerializeObject(Agv.CurJob.JobParam.GetMissionInfo())}");
}
}
catch { }
foreach (string item in Agv.Scope.Remark.Split(','))
{
DeviceLibrary.lift.LiftContext.ResetLiftOccupiedAgv(item);
}
//MiR_API.Del_Mission(Agv);
//添加Init任务
AgvTaskManager.AssignMission(Agv, $"{SettingString.Init}");
}
Agv.CurJob = null;
Agv.JobContext = new DeviceLibrary.bean.agv.JobContext();
catch (Exception ex)
{
LogUtil.error($"切换到手动异常", ex);
}
//添加Init任务
AgvTaskManager.AssignMission(Agv, $"{SettingString.Init}");
}
else
{
if (Agv.IsExistShelf)
if (Agv.IsExistShelf && Agv.CurJob == null)
{
chkBxAuto.Checked = false;
MessageBox.Show(this, string.Format("{0} 车上有负载，无法开启自动模式，请先清空小车负载！", Agv.Name), "警告");
LogUtil.error(string.Format("{0} 车上有负载，无法开启自动模式，请先清空小车负载！", Agv.Name));
return;
LogUtil.error(string.Format("{0} 车上有料车，开启自动模式！", Agv.Name));
MessageBox.Show($"{Agv.Name}车上有料车，开启自动模式！", "警告");
}
Agv.Auto = true;
}
......
AGVDispatch/Properties/AssemblyInfo.cs
......@@ -5,11 +5,11 @@ using System.Runtime.InteropServices;
// 有关程序集的一般信息由以下
// 控制。更改这些特性值可修改
// 与程序集关联的信息。
[assembly: AssemblyTitle("AGVControl-Fixture")]
[assembly: AssemblyTitle("AGVDispatch-Intelligentlogistics")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("AGVControl-Fixture")]
[assembly: AssemblyProduct("AGVDispatch-Intelligentlogistics")]
[assembly: AssemblyCopyright("Copyright © 2020")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
......
AGVDispatch/log4net.config
......@@ -125,9 +125,9 @@
<level value="fatal"/>
<appender-ref ref="TcpKPIO"/>
</logger>
<root name="AGVDispatch">
<logger name="AGVDispatch">
<level value="info"/>
<appender-ref ref="AGVDispatch"/>
</root>
</logger>
</log4net>
</configuration>
\ No newline at end of file
Common/SettingString.cs
......@@ -39,7 +39,6 @@ namespace Common
public const string File_AgvInfo = "File_AgvInfo";
public const string File_AgvTaskInfo = "File_AgvTaskInfo";
public const string File_NodeInfo = "File_NodeInfo";
public const string FileName_Missions = "Missions.json";
public const string FileName_AgvContext = "FileName_AgvContext";
public const string IsUse = "IsUse";
public const string RFID = "RFID";
......
DeviceLibrary/App.config 0 → 100644
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</configSections>
<entityFramework>
<providers>
<provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
<provider invariantName="System.Data.SQLite.EF6" type="System.Data.SQLite.EF6.SQLiteProviderServices, System.Data.SQLite.EF6" />
</providers>
</entityFramework>
<system.data>
<DbProviderFactories>
<remove invariant="System.Data.SQLite.EF6" />
<add name="SQLite Data Provider (Entity Framework 6)" invariant="System.Data.SQLite.EF6" description=".NET Framework Data Provider for SQLite (Entity Framework 6)" type="System.Data.SQLite.EF6.SQLiteProviderFactory, System.Data.SQLite.EF6" />
<remove invariant="System.Data.SQLite" /><add name="SQLite Data Provider" invariant="System.Data.SQLite" description=".NET Framework Data Provider for SQLite" type="System.Data.SQLite.SQLiteFactory, System.Data.SQLite" /></DbProviderFactories>
</system.data>
</configuration>
\ No newline at end of file
DeviceLibrary/Control.cs
......@@ -144,7 +144,7 @@ namespace DeviceLibrary
return null;
if (job != null)
{
log.Debug(agv_Info.Name + " GetJob OK " + job.ToString());
//log.Debug(agv_Info.Name + " GetJob OK " + job.ToString());
return job;
}
}
......@@ -163,7 +163,6 @@ namespace DeviceLibrary
AgvInfo agv = AGVManager.agvInfo[i];
if (!agv.IsCon) continue; //AGV网络连接
if (!AGVManager.agvInfo[i].Auto) continue; //AGV是否可用
//Ready,Pause,Executing，Error
if (AGVManager.agvInfo[i].StateID.Equals(eAGVState.Pause))
{
......
DeviceLibrary/DeviceLibrary.csproj
<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Import Project="..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.props" Condition="Exists('..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.props')" />
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
<PropertyGroup>
<Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
......@@ -12,6 +13,8 @@
<TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
<FileAlignment>512</FileAlignment>
<Deterministic>true</Deterministic>
<NuGetPackageImportStamp>
</NuGetPackageImportStamp>
</PropertyGroup>
<PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
<DebugSymbols>true</DebugSymbols>
......@@ -31,6 +34,12 @@
<WarningLevel>4</WarningLevel>
</PropertyGroup>
<ItemGroup>
<Reference Include="EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL">
<HintPath>..\AGVDispatch\packages\EntityFramework.6.4.4\lib\net45\EntityFramework.dll</HintPath>
</Reference>
<Reference Include="EntityFramework.SqlServer, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL">
<HintPath>..\AGVDispatch\packages\EntityFramework.6.4.4\lib\net45\EntityFramework.SqlServer.dll</HintPath>
</Reference>
<Reference Include="log4net, Version=2.0.12.0, Culture=neutral, PublicKeyToken=669e0ddf0bb1aa2a, processorArchitecture=MSIL">
<HintPath>..\AGVDispatch\packages\log4net.2.0.12\lib\net45\log4net.dll</HintPath>
</Reference>
......@@ -38,9 +47,22 @@
<Reference Include="RestSharp">
<HintPath>.\RestSharp.dll</HintPath>
</Reference>
<Reference Include="SQLite.CodeFirst, Version=1.7.0.34, Culture=neutral, PublicKeyToken=eb96ba0a78d831a7, processorArchitecture=MSIL">
<HintPath>..\AGVDispatch\packages\SQLite.CodeFirst.1.7.0.34\lib\net45\SQLite.CodeFirst.dll</HintPath>
</Reference>
<Reference Include="System" />
<Reference Include="System.ComponentModel.DataAnnotations" />
<Reference Include="System.Configuration" />
<Reference Include="System.Core" />
<Reference Include="System.Data.SQLite, Version=1.0.116.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=MSIL">
<HintPath>..\AGVDispatch\packages\Stub.System.Data.SQLite.Core.NetFramework.1.0.116.0\lib\net46\System.Data.SQLite.dll</HintPath>
</Reference>
<Reference Include="System.Data.SQLite.EF6, Version=1.0.116.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=MSIL">
<HintPath>..\AGVDispatch\packages\System.Data.SQLite.EF6.1.0.116.0\lib\net46\System.Data.SQLite.EF6.dll</HintPath>
</Reference>
<Reference Include="System.Data.SQLite.Linq, Version=1.0.116.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=MSIL">
<HintPath>..\AGVDispatch\packages\System.Data.SQLite.Linq.1.0.116.0\lib\net46\System.Data.SQLite.Linq.dll</HintPath>
</Reference>
<Reference Include="System.Drawing" />
<Reference Include="System.Runtime.Serialization" />
<Reference Include="System.ServiceModel" />
......@@ -65,21 +87,25 @@
<Compile Include="bean\agv\Mir_Error.cs" />
<Compile Include="bean\agv\Scope.cs" />
<Compile Include="bean\ChargePiles.cs" />
<Compile Include="bean\jobType\SteelBackLiftToLinesJobType.cs" />
<Compile Include="bean\jobType\F1LiftC1ToLiftD2JobType.cs" />
<Compile Include="bean\jobType\F1LiftD2ToLiftC1JobType.cs" />
<Compile Include="bean\jobType\SteelLineToLiftJobType.cs" />
<Compile Include="bean\jobType\LineToLineJobType.cs" />
<Compile Include="bean\jobType\RecoveryJobType.cs" />
<Compile Include="bean\jobType\LineOneToManyJobType.cs" />
<Compile Include="bean\job\ChargeJob.cs" />
<Compile Include="bean\job\F1LiftC1ToLiftD2Job.cs" />
<Compile Include="bean\job\F1LiftD2ToLiftC1Job.cs" />
<Compile Include="bean\job\SteelLiftToLinesJob.cs" />
<Compile Include="bean\job\LineOneToManyJob.cs" />
<Compile Include="bean\job\SteelLineToLiftJob.cs" />
<Compile Include="bean\job\LineToLineJob.cs" />
<Compile Include="bean\job\LiftToLinesJob.cs" />
<Compile Include="bean\job\F1LiftToStoreJob.cs" />
<Compile Include="bean\job\LineToLiftJob.cs" />
<Compile Include="bean\JobParam.cs" />
<Compile Include="bean\jobType\F1LiftToStoreJobType.cs" />
<Compile Include="bean\jobType\BackLiftToLineJobType.cs" />
<Compile Include="bean\jobType\LineToLiftJobType.cs" />
<Compile Include="bean\TaskRunState.cs" />
<Compile Include="bean\jobType\LiftToLinesJobType.cs" />
......@@ -88,6 +114,8 @@
<Compile Include="bean\Node.cs" />
<Compile Include="bean\RunStep.cs" />
<Compile Include="Control.cs" />
<Compile Include="db\AGVDataContext.cs" />
<Compile Include="db\JobContextInfo.cs" />
<Compile Include="lift\ClientStatus.cs" />
<Compile Include="lift\LiftContext.cs" />
<Compile Include="lift\LiftInfo.cs" />
......@@ -148,7 +176,19 @@
</Content>
</ItemGroup>
<ItemGroup>
<None Include="App.config" />
<None Include="packages.config" />
</ItemGroup>
<ItemGroup />
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
<Target Name="EnsureNuGetPackageBuildImports" BeforeTargets="PrepareForBuild">
<PropertyGroup>
<ErrorText>这台计算机上缺少此项目引用的 NuGet 程序包。使用“NuGet 程序包还原”可下载这些程序包。有关更多信息，请参见 http://go.microsoft.com/fwlink/?LinkID=322105。缺少的文件是 {0}。</ErrorText>
</PropertyGroup>
<Error Condition="!Exists('..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.props')" Text="$([System.String]::Format('$(ErrorText)', '..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.props'))" />
<Error Condition="!Exists('..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.targets')" Text="$([System.String]::Format('$(ErrorText)', '..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.targets'))" />
<Error Condition="!Exists('..\AGVDispatch\packages\Stub.System.Data.SQLite.Core.NetFramework.1.0.116.0\build\net46\Stub.System.Data.SQLite.Core.NetFramework.targets')" Text="$([System.String]::Format('$(ErrorText)', '..\AGVDispatch\packages\Stub.System.Data.SQLite.Core.NetFramework.1.0.116.0\build\net46\Stub.System.Data.SQLite.Core.NetFramework.targets'))" />
</Target>
<Import Project="..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.targets" Condition="Exists('..\AGVDispatch\packages\EntityFramework.6.4.4\build\EntityFramework.targets')" />
<Import Project="..\AGVDispatch\packages\Stub.System.Data.SQLite.Core.NetFramework.1.0.116.0\build\net46\Stub.System.Data.SQLite.Core.NetFramework.targets" Condition="Exists('..\AGVDispatch\packages\Stub.System.Data.SQLite.Core.NetFramework.1.0.116.0\build\net46\Stub.System.Data.SQLite.Core.NetFramework.targets')" />
</Project>
\ No newline at end of file
DeviceLibrary/bean/JobParam.cs
......@@ -34,7 +34,10 @@ namespace DeviceLibrary.bean
{
missionInfo = value;
}
/// <summary>
/// 存放钢网料架的节点
/// </summary>
public Node SteelShelfNode { get; set; }
/// <summary>
/// 当前目标地点
/// </summary>
......
DeviceLibrary/bean/JobStep.cs
......@@ -23,7 +23,6 @@ namespace DeviceLibrary
//不为空，且与上一个消息不一样才打印
if (!value.Equals(msg))
{
AGVManager.SaveAgvContextInfo(step.ToString());
LogUtil.info(string.Format("RunMsg:[{0}][{1}]{2}",Agv,step,value));
}
}
......
DeviceLibrary/bean/RunStep.cs
......@@ -71,6 +71,9 @@ namespace DeviceLibrary.bean
#region 1F库房到电梯
S1F_StoreToLift_01_ToStore,
S1F_StoreToLift_02_PutShelfOn,
S1F_StoreToLift_ToSteelSrc,
S1F_StoreToLift_PlaySound,
S1F_StoreToLift_WaitConfirm,
S1F_StoreToLift_03_ToLift,
S1F_StoreToLift_04_CheckLiftStatus,
......@@ -172,6 +175,7 @@ namespace DeviceLibrary.bean
/// </summary>
SD_LiftToLine_14_04_CloseLiftDoor,
#endregion
SD_LiftToLine_15_ToSteelShelfOff,
/// <summary>
/// 料车无需返回，直接结束
/// </summary>
......
DeviceLibrary/bean/agv/Agv_Info.cs
......@@ -624,6 +624,7 @@ namespace DeviceLibrary
if(!JobContext.Equals(jobContext))
{
JobContext = jobContext;
AGVManager.SaveJobContext(this);
}
}
}
......
DeviceLibrary/bean/job/Job.cs
......@@ -173,13 +173,31 @@ namespace DeviceLibrary
if (JobParam.GetMissionInfo() != null)
{
service.model.ProjectType type = JobParam.GetMissionInfo().projectType;
if (type.Equals(service.model.ProjectType.空台车领用) || type.Equals(service.model.ProjectType.空台车归还))
if (type.Equals(service.model.ProjectType.台车领用) || type.Equals(service.model.ProjectType.台车归还)||
type.Equals(service.model.ProjectType.厂内PCBA入库_台车)|| type.Equals(service.model.ProjectType.半成品入库_台车)
|| type.Equals(service.model.ProjectType.PCBA半成品领用_台车))
{
return false;
}
}
return true;
}
/// <summary>
/// 是否是指定项目类型
/// </summary>
/// <returns></returns>
protected bool IsProjectType(ProjectType projectType)
{
if (JobParam.GetMissionInfo() != null)
{
service.model.ProjectType type = JobParam.GetMissionInfo().projectType;
if (type.Equals(projectType))
{
return true;
}
}
return false;
}
protected string GetTargetName(Node node)
{
if (JobParam.GetMissionInfo() != null && JobParam.GetMissionInfo().projectType.Equals(ProjectType.Tray领用))
......@@ -214,7 +232,7 @@ namespace DeviceLibrary
/// <param name="missionInfo"></param>
protected void ResetOccupiedAgv(MissionInfo missionInfo)
{
missionInfo.ResetOccupied();
MissionManager.SetLiftOccupiedAgv(missionInfo.missionId, string.Empty);
}
}
}
......
DeviceLibrary/bean/job/LiftToLinesJob.cs
......@@ -45,7 +45,7 @@ namespace DeviceLibrary.bean.job
//上报运输状态
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, JobParam.SrcNode.Name, service.model.TransportStatus.ModeStr.auto,
$"到达{ JobParam.SrcNode.Name }"));
$"到达{JobParam.SrcNode.Name}"));
runInfo = $"到达{JobParam.SrcNode.AliceName},等待门开启";
JobRunStep.Msg = runInfo;
......@@ -124,7 +124,7 @@ namespace DeviceLibrary.bean.job
//上报位置
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, JobParam.CurTargetNode.Name, service.model.TransportStatus.ModeStr.auto,
$"到达{ JobParam.CurTargetNode.Name }"));
$"到达{JobParam.CurTargetNode.Name}"));
}
}
else if (JobRunStep.IsStep(RunStep.SD_LiftToLine_08_UpdateLocation))
......@@ -152,7 +152,7 @@ namespace DeviceLibrary.bean.job
JobRunStep.Msg = runInfo;
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, JobParam.CurTargetNode.Name, service.model.TransportStatus.ModeStr.agvButton,
$"卸货{ JobParam.CurTargetNode.Name }"));
$"卸货{JobParam.CurTargetNode.Name}"));
//重置确认信息
JobParam.CurTargetNode.ExtendEquip.Reset();
StopSound(agv);
......@@ -162,7 +162,7 @@ namespace DeviceLibrary.bean.job
//报警，$"等待{JobParam.CurTargetNode.AliceName}的人员确认超时{timeoutval}分"
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.error, agv.Name, JobParam.CurTargetNode.Name, service.model.TransportStatus.ModeStr.agvButton,
$"等待{ JobParam.CurTargetNode.Name }确认超时{timeoutval}分"));
$"等待{JobParam.CurTargetNode.Name}确认超时{timeoutval}分"));
}
}
else if (JobRunStep.IsStep(RunStep.SD_LiftToLine_10_CheckNextLine))
......@@ -192,10 +192,7 @@ namespace DeviceLibrary.bean.job
else if (JobParam.GetMissionInfo() != null && !JobParam.GetMissionInfo().needBack)
{
JobRunStep.ToNextStep(RunStep.SD_LiftToLine_15_TakeShelfOff);
runInfo = $"{JobParam.CurTargetNode.AliceName}是最后一个线体，分发结束，料车无需返回，准备卸车";
//任务状态变更
MissionManager.SetMissionState(JobParam.GetMissionInfo().missionId, service.model.MissionState.完成, out string msg);
runInfo = $"{JobParam.CurTargetNode.AliceName}是最后一个线体，料车无需返回，准备卸车";
AllocateTask(agv, SettingString.TakeShelfOff);
JobRunStep.Msg = runInfo;
}
......@@ -211,7 +208,7 @@ namespace DeviceLibrary.bean.job
//上报位置
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, JobParam.SrcNode.Name, service.model.TransportStatus.ModeStr.auto,
$"到达{ JobParam.SrcNode.Name }"));
$"到达{JobParam.SrcNode.Name}"));
//请求电梯
lift.LiftContext.Request(JobParam.GetMissionInfo(), agv, true);
System.Threading.Thread.Sleep(1000);
......@@ -361,6 +358,22 @@ namespace DeviceLibrary.bean.job
}
#endregion
else if (JobRunStep.IsStep(RunStep.SD_LiftToLine_15_TakeShelfOff))
{
if (agv.TaskRunState.CheckTaskFinished(agv.Name))
{
JobRunStep.ToNextStep(RunStep.END);
runInfo = $"在{JobParam.CurTargetNode.AliceName}卸下料车完成";
JobRunStep.Msg = runInfo;
//任务状态变更
MissionManager.SetMissionState(JobParam.GetMissionInfo().missionId, service.model.MissionState.完成, out string msg);
//上报状态
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, JobParam.CurTargetNode.Name, service.model.TransportStatus.ModeStr.auto,
$"卸车"));
}
}
else if (JobRunStep.IsStep(RunStep.END))
{
JobRunStep.EndJob();
......
DeviceLibrary/bean/job/LineToLineJob.cs
......@@ -68,17 +68,30 @@ namespace DeviceLibrary.bean.job
{
if (agv.TaskRunState.CheckTaskFinished(agv.Name))
{
JobRunStep.ToNextStep(RunStep.SD_LineToLine_04_PlaySound);
//确认按钮生效
JobParam.CurTargetNode.ExtendEquip.AllowConfirm();
//上报运输状态
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, agv.Place.Name, service.model.TransportStatus.ModeStr.auto,
$"到达{ JobParam.CurTargetNode.Name }"));
if(NeedConfirm())
{
JobRunStep.ToNextStep(RunStep.SD_LineToLine_04_PlaySound);
//确认按钮生效
JobParam.CurTargetNode.ExtendEquip.AllowConfirm();
//上报运输状态
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, agv.Place.Name, service.model.TransportStatus.ModeStr.auto,
$"到达{JobParam.CurTargetNode.Name}"));
runInfo = $"到达{JobParam.CurTargetNode.AliceName}的放料点";
JobRunStep.Msg = runInfo;
PlaySound(agv);
runInfo = $"到达{JobParam.CurTargetNode.AliceName}的放料点";
JobRunStep.Msg = runInfo;
PlaySound(agv);
}
else
{
JobRunStep.ToNextStep(RunStep.SD_LineToLine_04_WaitConfirm);
//上报运输状态
manager.UploadManager.UploadTransportStatus(new service.model.TransportStatus(agv.CurJob.JobParam.GetMissionInfo().missionId,
service.model.TransportStatus.TypeStr.status, agv.Name, agv.Place.Name, service.model.TransportStatus.ModeStr.auto,
$"到达{JobParam.CurTargetNode.Name}"));
runInfo = $"到达{JobParam.CurTargetNode.AliceName}的放料点";
JobRunStep.Msg = runInfo;
}
}
}
else if (JobRunStep.IsStep(RunStep.SD_LineToLine_04_PlaySound))
......@@ -87,6 +100,9 @@ namespace DeviceLibrary.bean.job
{
if (OpManager.WaitConfirm.Line(JobParam.CurTargetNode))
{
JobRunStep.ToNextStep(RunStep.SD_LineToLine_04_WaitConfirm);
runInfo = $"在{JobParam.CurTargetNode.AliceName}确认完成";
JobRunStep.Msg = runInfo;
StopSound(agv);
}
else if (JobRunStep.IsTimeOut(WaitTimeOut, out double timeoutval))
......
DeviceLibrary/bean/jobType/F1LiftToStoreJobType.cs → DeviceLibrary/bean/jobType/BackLiftToLineJobType.cs
......@@ -6,7 +6,7 @@ namespace DeviceLibrary.bean.jobType
/// <summary>
/// 1F，电梯到库房
/// </summary>
public class F1LiftToStoreJobType : JobType
public class BackLiftToLineJobType : JobType
{
public override Job GetNewJob(AgvInfo agv)
{
......@@ -14,7 +14,7 @@ namespace DeviceLibrary.bean.jobType
return null;
else
{
if(agv.Scope.Floor.Equals(1) && agv.HasEmptyShelfInLift(out string liftname, out lift.LiftStatus lift))
if(agv.HasEmptyShelfInLift(out string liftname, out lift.LiftStatus lift))//agv.Scope.Floor.Equals(1) &&
{
service.model.MissionInfo missionInfo = manager.MissionManager.GetF1ReceiveMission(agv);
if(missionInfo!=null)
......
DeviceLibrary/bean/jobType/LiftToLinesJobType.cs
......@@ -25,7 +25,7 @@ namespace DeviceLibrary
return null;
else
{
if (!agv.Scope.Floor.Equals(1) && agv.HasEmptyShelfInLift(out string liftname, out lift.LiftStatus lift))
if ( agv.HasEmptyShelfInLift(out string liftname, out lift.LiftStatus lift))//!agv.Scope.Floor.Equals(1) &&
{
service.model.MissionInfo missionInfo = manager.MissionManager.GetReceiveMission(agv);
if (missionInfo != null)
......
DeviceLibrary/bean/jobType/LineToLiftJobType.cs
......@@ -10,57 +10,31 @@ namespace DeviceLibrary.bean.jobType
/// <summary>
/// 从线体取料并送入电梯内
/// </summary>
public class LineToLiftJobType:JobType
public class LineToLiftJobType : JobType
{
public override Job GetNewJob(AgvInfo agv)
{
if (!agv.IsIdle())
return null;
else if (agv.Scope.Floor.Equals(1))
service.model.MissionInfo missionInfo = manager.MissionManager.GetLineToLiftMission(agv, out string liftname);
if (missionInfo != null)
{
service.model.MissionInfo missionInfo = manager.MissionManager.GetF1DeliverMission(agv,out string liftname);
if(missionInfo!=null)
Node src = manager.NodeManager.GetNode(missionInfo.sourcePoint, NodeType.Node);
Node dest = manager.NodeManager.GetNode(liftname, NodeType.Lift);
if (src == null)
{
Node src = manager.NodeManager.GetNode(missionInfo.sourcePoint, NodeType.Node);
Node dest = manager.NodeManager.GetNode(liftname, NodeType.Lift);
if (src == null)
{
Common.LogUtil.error($"无法生成任务，起始点不存在：{missionInfo.sourcePoint}");
return null;
}
if (dest == null)
{
Common.LogUtil.error($"无法生成任务，电梯不存在：{liftname}");
return null;
}
JobParam jobParam = new JobParam(src, dest, null, missionInfo);
//任务状态变更
MissionManager.SetMissionState(missionInfo.missionId, service.model.MissionState.已分配, out string msg);
return new LineToLiftJob(jobParam);
Common.LogUtil.error($"无法生成任务，起始点不存在：{missionInfo.sourcePoint}");
return null;
}
}
else
{
service.model.MissionInfo missionInfo = manager.MissionManager.GetFinishedDeliverMission(agv, out string liftname);
if (missionInfo != null)
if (dest == null)
{
Node src = manager.NodeManager.GetNode(missionInfo.sourcePoint, NodeType.Node);
Node dest = manager.NodeManager.GetNode(liftname, NodeType.Lift);
if (src == null)
{
Common.LogUtil.error($"无法生成任务，起始点不存在：{missionInfo.sourcePoint}");
return null;
}
if (dest == null)
{
Common.LogUtil.error($"无法生成任务，电梯不存在：{liftname}");
return null;
}
JobParam jobParam = new JobParam(src, dest, null, missionInfo);
//任务状态变更
MissionManager.SetMissionState(missionInfo.missionId, service.model.MissionState.已分配, out string msg);
return new LineToLiftJob(jobParam);
Common.LogUtil.error($"无法生成任务，电梯不存在：{liftname}");
return null;
}
JobParam jobParam = new JobParam(src, dest, null, missionInfo);
//任务状态变更
MissionManager.SetMissionState(missionInfo.missionId, service.model.MissionState.已分配, out string msg);
return new LineToLiftJob(jobParam);
}
return null;
}
......
DeviceLibrary/bean/jobType/RecoveryJobType.cs
......@@ -20,9 +20,11 @@ namespace DeviceLibrary.bean.jobType
service.model.MissionInfo missionInfo = manager.MissionManager.GetMission(agv.JobContext.MissionId);
if (missionInfo != null)
{
agv.TaskRunState = new TaskRunState();
agv.TaskRunState.Task = agv.JobContext.AgvTask;
Type type = Type.GetType(agv.JobContext.JobFullName); // 通过类名获取同名类
Job job = (Job)System.Activator.CreateInstance(type);
job.JobParam= agv.JobContext.JobParam;
job.JobParam = agv.JobContext.JobParam;
job.JobParam.CurTargetNode = manager.NodeManager.GetNodeByName(agv.JobContext.JobParam.CurTargetNode.Name);
job.JobParam.SetMissionInfo(missionInfo);
job.Task = agv.JobContext.AgvTask;
......
DeviceLibrary/bean/jobType/SteelBackLiftToLinesJobType.cs 0 → 100644
using Common;
using DeviceLibrary.bean.job;
using DeviceLibrary.manager;
namespace DeviceLibrary.bean.jobType
{
/// <summary>
/// 钢网项目-钢网领用-返回楼层，电梯
/// </summary>
public class SteelBackLiftToLinesJobType : JobType
{
public override Job GetNewJob(AgvInfo agv)
{
if (!agv.IsIdle())
return null;
else
{
if(agv.HasEmptyShelfInLift(out string liftname, out lift.LiftStatus lift))
{
service.model.MissionInfo missionInfo = manager.MissionManager.GetSteelReceiveMission(agv);
if(missionInfo!=null)
{
Node src = manager.NodeManager.GetNode(liftname, NodeType.Lift);
string[] dests = lift.destinationPoint.Split(',');
Node dest = manager.NodeManager.GetNode(dests.Length > 1 ? dests[0] : lift.destinationPoint, NodeType.Node);
JobParam jobParam = new JobParam(src, dest,null,missionInfo);
jobParam.SteelShelfNode = NodeManager.GetNode(Common.AppConfigHelper.GetValue("SteelShelfPos"), NodeType.Node);
if (dests.Length > 1)
{
for (int i = 1; i < dests.Length; i++)
{
Node node = manager.NodeManager.GetNode(dests[i], NodeType.Node);
if (node != null)
jobParam.TargetNodes.Add(node);
else
{
LogUtil.error($"无法生成任务，因不存在的节点：{dests[i]}");
return null;
}
}
}
return new SteelLiftToLinesJob(jobParam);
}
}
}
return null;
}
}
}
DeviceLibrary/bean/jobType/SteelLineToLiftJobType.cs 0 → 100644
using DeviceLibrary.manager;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace DeviceLibrary.bean.jobType
{
/// <summary>
/// 钢网入库，从线体取料并送入电梯内
/// </summary>
public class SteelLineToLiftJobType : JobType
{
public override Job GetNewJob(AgvInfo agv)
{
if (!agv.IsIdle())
return null;
service.model.MissionInfo missionInfo = manager.MissionManager.GetSteelLineToLiftMission(agv, out string liftname);
if (missionInfo != null)
{
Node src = manager.NodeManager.GetNode(missionInfo.sourcePoint, NodeType.Node);
Node dest = manager.NodeManager.GetNode(liftname, NodeType.Lift);
if (src == null)
{
Common.LogUtil.error($"无法生成任务，起始点不存在：{missionInfo.sourcePoint}");
return null;
}
if (dest == null)
{
Common.LogUtil.error($"无法生成任务，电梯不存在：{liftname}");
return null;
}
JobParam jobParam = new JobParam(src, dest, null, missionInfo);
jobParam.SteelShelfNode = NodeManager.GetNode(Common.AppConfigHelper.GetValue("SteelShelfPos"), NodeType.Node);
//任务状态变更
MissionManager.SetMissionState(missionInfo.missionId, service.model.MissionState.已分配, out string msg);
return new SteelLineToLiftJob(jobParam);
}
return null;
}
}
}
DeviceLibrary/db/AGVDataContext.cs 0 → 100644
using System.Data.SQLite;
using System;
using System.Collections.Generic;
using System.Data.Entity;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using SQLite.CodeFirst;
using DeviceLibrary.service.model;
namespace DeviceLibrary
{
internal class AGVDataContext:DbContext
{
protected override void OnModelCreating(DbModelBuilder modelBuilder)
{
var sqliteConnectionInitializer = new SqliteCreateDatabaseIfNotExists<AGVDataContext>(modelBuilder);
Database.SetInitializer(sqliteConnectionInitializer);
}
public AGVDataContext() :base("AGVDataContext") { }////配置使用的连接名
public DbSet<MissionInfo> MissionInfos { get; set; }
public DbSet<JobContextInfo> JobContextInfos { get; set; }
}
}
DeviceLibrary/db/JobContextInfo.cs 0 → 100644
using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using System.ComponentModel.DataAnnotations.Schema;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace DeviceLibrary
{
[Table("job_context")]
internal class JobContextInfo
{
public string agvName { get; set; }
[Key]
public string ip { get; set; }
public string jobContext { get; set; }
}
}
DeviceLibrary/db/_system~.ini 0 → 100644
文件属性发生变化
DeviceLibrary/manager/AGVManager.cs
......@@ -62,7 +62,7 @@ namespace DeviceLibrary
{
jobTypes = new List<JobType>();
jobTypes.Add(new LiftToLinesJobType());
jobTypes.Add(new F1LiftToStoreJobType());
jobTypes.Add(new BackLiftToLineJobType());
jobTypes.Add(new LineToLiftJobType());
//jobTypes.Add(new LineToLineJobType());
jobTypes.Add(new LineOneToManyJobType());
......@@ -102,104 +102,80 @@ namespace DeviceLibrary
sysClients.Add(item.Client);
}
}
static object writeobj = new object();
public static void SaveAgvContextInfo(string step)
/// <summary>
/// 获取agv运行上下文
/// </summary>
/// <param name="agv"></param>
/// <returns></returns>
public static JobContext GetJobContext(AgvInfo agv)
{
string filePath = CONFIG_PATH + AppConfigHelper.GetValue(SettingString.FileName_AgvContext);
if (Monitor.TryEnter(writeobj, 500))
using (AGVDataContext ctx = new AGVDataContext())
{
try
var info = ctx.JobContextInfos.Where(s => s.ip.Equals(agv.IP)).FirstOrDefault();
if (info != null)
{
List<JobContext> context = new List<JobContext>();
foreach (AgvInfo item in agvInfo)
try
{
context.Add(item.JobContext);
return JsonHelper.DeserializeJsonToObject<JobContext>(info.jobContext);
}
string json = JsonHelper.SerializeObject(context);
if (File.Exists(filePath))
catch
{
if (true)
{
string backUpPath = filePath + ".back";
File.Copy(filePath, backUpPath, true);
}
File.Delete(filePath);
return new JobContext();
}
File.WriteAllText(filePath, json);
LogUtil.debug("保存Agv上下文信息到[" + filePath + $"]:{json}");
}
catch (Exception ex)
}
return null;
}
/// <summary>
/// 保存agv运行上下文
/// </summary>
/// <param name="agv"></param>
public static void SaveJobContext(AgvInfo agv)
{
using (AGVDataContext ctx = new AGVDataContext())
{
var info = ctx.JobContextInfos.Where(s => s.ip.Equals(agv.IP)).FirstOrDefault();
if (info != null)
{
LogUtil.error("保存Agv上下文信息到[" + filePath + "]失败:", ex);
info.jobContext = JsonHelper.SerializeObject(agv.JobContext);
}
finally
else
{
Monitor.Exit(writeobj);
info = new JobContextInfo();
info.agvName = agv.Name;
info.ip = agv.IP;
info.jobContext = JsonHelper.SerializeObject(agv.JobContext);
ctx.JobContextInfos.Add(info);
}
ctx.SaveChangesAsync();
}
else
{
LogUtil.error("SaveAgvContextInfo timeout:" + step);
}
}
static void ReadAgvContextInfo(List<AgvInfo> agvInfos)
{
string filePath = CONFIG_PATH + AppConfigHelper.GetValue(SettingString.FileName_AgvContext);
List<JobContext> agvs = new List<JobContext>();
try
{
string json = "";
bool configchanged = false;
if (File.Exists(filePath))
foreach (AgvInfo agv in agvInfos)
{
json = File.ReadAllText(filePath);
if (!string.IsNullOrEmpty(json))
if(!agv.Auto)
continue;
bean.jobType.RecoveryJobType recoveryJobType = new RecoveryJobType();
JobContext info = GetJobContext(agv);
if (info != null)
{
agvs = JsonHelper.DeserializeJsonToList<JobContext>(json);
if (agvs == null)
{
return;
}
else
agv.SetJobContext(info);
agv.CurJob = recoveryJobType.GetNewJob(agv);
if (agv.CurJob != null && (agv.CurJob is StandyJob || agv.CurJob is ChargeJob))
{
foreach (AgvInfo agv in agvInfos)
{
JobContext info = agvs.Find(s => agv.Name.Equals(s.Name));
if (info == null)
{
LogUtil.info($"{agv.Name}配置文件发生变化,不使用Agv上下文信息");
configchanged = true;
break;
}
}
if (!configchanged)
{
bean.jobType.RecoveryJobType recoveryJobType = new RecoveryJobType();
foreach (AgvInfo agv in agvInfos)
{
JobContext info = agvs.Find(s => s.Name.Equals(agv.Name));
if (info != null)
{
agv.SetJobContext(info);
agv.CurJob = recoveryJobType.GetNewJob(agv);
if (agv.CurJob != null && (agv.CurJob is StandyJob || agv.CurJob is ChargeJob))
{
agv.CurJob = null;
}
}
}
LogUtil.info("读取并使用Agv上下文信息[" + filePath + "]:" + json);
}
agv.CurJob = null;
}
LogUtil.info($"读取并使用{agv.Name}上下文信息:{JsonHelper.SerializeObject(info)}");
}
}
}
catch (Exception ex)
{
LogUtil.error("读取Agv上下文信息[" + filePath + "]失败:", ex);
LogUtil.error("读取Agv上下文信息失败:", ex);
}
}
}
......
DeviceLibrary/manager/UploadManager.cs
......@@ -66,7 +66,7 @@ namespace DeviceLibrary.manager
{
agvState.state = "执行任务";
agvState.missionId = item.CurJob.JobParam.GetMissionInfo().missionId;
agvState.remark = item.CurJob.JobParam.GetMissionInfo().Remark;
agvState.remark = item.CurJob.JobParam.GetMissionInfo().remark;
}
else
agvState.state = "自动";
......
DeviceLibrary/packages.config
<?xml version="1.0" encoding="utf-8"?>
<packages>
<package id="EntityFramework" version="6.4.4" targetFramework="net472" />
<package id="log4net" version="2.0.12" targetFramework="net472" />
<package id="SQLite.CodeFirst" version="1.7.0.34" targetFramework="net472" />
<package id="Stub.System.Data.SQLite.Core.NetFramework" version="1.0.116.0" targetFramework="net472" />
<package id="System.Data.SQLite" version="1.0.116.0" targetFramework="net472" />
<package id="System.Data.SQLite.Core" version="1.0.116.0" targetFramework="net472" />
<package id="System.Data.SQLite.EF6" version="1.0.116.0" targetFramework="net472" />
<package id="System.Data.SQLite.Linq" version="1.0.116.0" targetFramework="net472" />
</packages>
\ No newline at end of file
DeviceLibrary/service/Service.cs
......@@ -35,7 +35,7 @@ namespace DeviceLibrary
result.msg = $"不存在的节点:{createMissionInfo.sourcePoint}";
Log.Error(result.msg);
}
else if(!NodeManager.CheckNodes(createMissionInfo.destinationPoint,out string nodenames))
else if (!NodeManager.CheckNodes(createMissionInfo.destinationPoint, out string nodenames))
{
result.code = -1;
result.msg = $"不存在的节点:{nodenames}";
......@@ -44,14 +44,20 @@ namespace DeviceLibrary
else if (!MissionManager.Contains(createMissionInfo))
{
MissionManager.SetMissionState(createMissionInfo.missionId, MissionState.创建, out string msg);
MissionManager.Add(createMissionInfo);
Log.Info($"创建任务成功:{s}");
bool rtn = MissionManager.AddMission(createMissionInfo);
if (rtn)
Log.Info($"创建任务成功:{s}");
else
{
result.code = -1;
result.msg = $"创建任务失败，已存在该任务id：{createMissionInfo.missionId}";
Log.Error(result.msg);
}
}
else
{
result.code = -1;
result.msg = $"已存在该任务id：{createMissionInfo.missionId}";
result.msg = $"创建任务失败：{createMissionInfo.missionId}";
Log.Error(result.msg);
}
}
......@@ -92,10 +98,10 @@ namespace DeviceLibrary
}
else
{
if(MissionManager.Contains(deleteMission.missionId))
if (MissionManager.Contains(deleteMission.missionId))
{
MissionInfo missionInfo = MissionManager.GetMission(deleteMission.missionId);
if(missionInfo ==null)
if (missionInfo == null)
{
result.code = -1;
result.msg = $"不存在该任务id:{deleteMission.missionId}";
......@@ -105,15 +111,15 @@ namespace DeviceLibrary
{
if (missionInfo.state.Equals(MissionState.创建))
{
MissionManager.SetMissionState(missionInfo.missionId, MissionState.取消,out string msg);
MissionManager.SetMissionState(missionInfo.missionId, MissionState.取消, out string msg);
result.msg = msg;
}
else
{
AgvInfo agvInfo=AGVManager.agvInfo.Find(k=>k.JobContext.MissionId == deleteMission.missionId);
if(agvInfo == null)
AgvInfo agvInfo = AGVManager.agvInfo.Find(k => k.JobContext.MissionId == deleteMission.missionId);
if (agvInfo == null)
{
MissionManager.SetMissionState(missionInfo.missionId, MissionState.中止,out string msg);
MissionManager.SetMissionState(missionInfo.missionId, MissionState.中止, out string msg);
result.msg = msg;
}
else
......@@ -153,7 +159,7 @@ namespace DeviceLibrary
else
{
Node node = NodeManager.GetNode(operationFinish.line);
if(node==null)
if (node == null)
{
result.code = -1;
result.msg = $"不存在的线体名:{operationFinish.line}";
......@@ -164,7 +170,7 @@ namespace DeviceLibrary
//if(node.ExtendEquip.CanConfirm)
{
Log.Info($"线体[{operationFinish.line}]被调用确认接口");
node.ExtendEquip.ApiConfirmSig=true;
node.ExtendEquip.ApiConfirmSig = true;
}
//else
//{
......
DeviceLibrary/service/model/MissionInfo.cs
using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using System.ComponentModel.DataAnnotations.Schema;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
......@@ -9,11 +11,13 @@ namespace DeviceLibrary.service.model
/// <summary>
/// 任务信息
/// </summary>
[Table("mission_info")]
public class MissionInfo
{
/// <summary>
/// 任务编号
/// </summary>
[Key]
public string missionId { get; set; }
/// <summary>
/// 任务状态
......@@ -127,22 +131,19 @@ namespace DeviceLibrary.service.model
public void SetState(MissionState missionState)
{
state = missionState;
remark = $"{projectType.ToString()},{state.ToString()}";
}
public string Remark { get; set; }
public string remark { get; set; }
public void SetAgvOccupied(string agvname)
{
occupiedAgv = agvname;
}
public void ResetOccupied()
{
occupiedAgv = string.Empty;
}
public static bool IsFinishedProdcut(MissionInfo missionInfo)
{
if (missionInfo == null)
return false;
return missionInfo.projectType.Equals(ProjectType.成品入库);
return missionInfo.projectType.Equals(ProjectType.移远成品入库);
}
}
......@@ -216,13 +217,58 @@ namespace DeviceLibrary.service.model
包材领用,
半成品领用,
静电箱领用,
空台车领用,
空台车归还,
/// <summary>
/// 二期
/// </summary>
台车领用,
/// <summary>
/// 二期
/// </summary>
台车归还,
包材归还,
/// <summary>
/// 二期
/// </summary>
成品入库,
半成品入库,
半成品入库与领用,
垃圾清运,
治具领用
治具领用,
/// <summary>
/// 二期项目
/// </summary>
钢网入库,
/// <summary>
/// 二期
/// </summary>
钢网领用,
/// <summary>
/// 二期
/// </summary>
厂内PCBA入库_台车,
/// <summary>
/// 二期
/// </summary>
移远半成品入库,
/// <summary>
/// 二期
/// </summary>
移远成品入库,
/// <summary>
/// 二期
/// </summary>
Tray_静电箱回收,
/// <summary>
/// 二期
/// </summary>
半成品入库_台车,
/// <summary>
/// 二期
/// </summary>
PCBA半成品领用_料架,
/// <summary>
/// 二期
/// </summary>
PCBA半成品领用_台车,
}
}
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!