Skip to content

孙克 / URSolderingRobot

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 3f9f31b3 由 几米阳光
选项

坐标偏移功能。离线编程功能。

1 个父辈 c5a1d21e
内嵌 并排
正在显示 16 个修改的文件 包含 832 行增加 和 319 行删除
Common/Setting_Init.cs
......@@ -102,7 +102,19 @@ namespace URSoldering.Common
public static string HasSoldering = "HasSoldering";
public static string Config_Pwd = "Config_Pwd";
public static string ZUpLiftValue = "ZUpLiftValue";
/// <summary>
/// Mark点的基准信息，从AOI获取的坐标
/// </summary>
public static string MarkDefaultPosition = "MarkDefaultPosition";
/// <summary>
/// 坐标转换系数，AOI获取图片的1像素对应实际多少毫米
/// </summary>
public static string PositionChangeValue = "PositionChangeValue";
/// <summary>
/// 坐标偏移的AOI节点名称
/// </summary>
public static string OffSetNodeName = "OffSetNodeName";
}
}
DeviceLibrary/Robot/MoveType.cs
......@@ -60,7 +60,23 @@ namespace URSoldering.DeviceLibrary
wait.IsEnd = false;
return wait;
}
/// <summary>
/// 等待坐标偏移
/// </summary>
/// <returns></returns>
public static WaitResultInfo WaitOffSet()
{
WaitResultInfo wait = new WaitResultInfo();
wait.WaitType = 7;
wait.IsEnd = false;
return wait;
}public static WaitResultInfo WaitAoiEnd()
{
WaitResultInfo wait = new WaitResultInfo();
wait.WaitType = 8;
wait.IsEnd = false;
return wait;
}
public string ToStr()
{
if (WaitType == 1)
......@@ -73,7 +89,7 @@ namespace URSoldering.DeviceLibrary
}
else if (WaitType == 3)
{
return "等待机器人运动结束"+UrPoint.ToShowStr();
return "等待机器人移动到位【"+UrPoint.ToShowStr()+"】";
}
else if (WaitType == 4)
{
......@@ -86,6 +102,14 @@ namespace URSoldering.DeviceLibrary
{
return "等待机器人连接完成";
}
else if (WaitType == 7)
{
return "等待坐标偏移完成";
}
else if (WaitType == 8)
{
return "等待AOI检测完成";
}
else
{
return "Wait位置类型：WaitType=【" + WaitType + "】";
......@@ -137,6 +161,8 @@ namespace URSoldering.DeviceLibrary
/// 机器人坐标
/// </summary>
public URPointValue UrPoint { get; set; }
}
public enum MoveType
{
......@@ -204,9 +230,13 @@ namespace URSoldering.DeviceLibrary
/// </summary>
W14_AOICheck=14,
/// <summary>
/// AOI检测完成
/// </summary>
W15_AOIEnd=15,
/// <summary>
/// 清洗完成
/// </summary>
W15_ClearEnd=15,
W16_ClearEnd=16,
///// <summary>
///// 送丝下降
///// </summary>
......@@ -231,6 +261,10 @@ namespace URSoldering.DeviceLibrary
/// 等待3秒后识别位置进行坐标偏移
/// </summary>
W31_WaitToPositionOffset = 31,
/// <summary>
/// 坐标偏移完成
/// </summary>
W32_PositionOffsetEnd=32,
Home_Reset = 100,
/// <summary>
......
DeviceLibrary/Robot/soldering/WeldRobotBean.cs
......@@ -74,6 +74,7 @@ namespace URSoldering.DeviceLibrary
RobotMin = LoadPoint(Setting_Init.Soldering_RobotMin);
RobotMax = LoadPoint(Setting_Init.Soldering_RobotMax);
MarkPoint = LoadPoint(Setting_Init.Soldering_MarkPoint);
LoadMarkInfo();
}
private static URPointValue LoadPoint(string configStr)
......
DeviceLibrary/Robot/soldering/WeldRobotBean_Partial.cs
......@@ -8,6 +8,10 @@ namespace URSoldering.DeviceLibrary
{
partial class WeldRobotBean
{
public static PositionResult MarkImgPosition = new PositionResult(0, 0);
public static double MarkChangeValue = 1;
public static bool OffSetEnd = true;
public static bool AOIEnd = true;
public static bool IsInWeld=false;
public static bool LastAOIResult = true;
//public delegate void GetCode();
......@@ -115,8 +119,16 @@ namespace URSoldering.DeviceLibrary
}
else if (WeldMoveStep.moveStep.Equals(MoveStep.W31_WaitToPositionOffset))
{
WeldMoveStep.NextMoveStep(MoveStep.W32_PositionOffsetEnd);
OffSetEnd = false;
WeldMoveStep.WaitList.Add(WaitResultInfo.WaitTime(3000));
WeldMoveStep.WaitList.Add(WaitResultInfo.WaitOffSet());
WeldMoveStep.OneWaitOk = true;
PositionOffProcess();
PointEndPross();
}else if (WeldMoveStep.moveStep.Equals(MoveStep.W32_PositionOffsetEnd))
{
PointEndPross();
}
else if (WeldMoveStep.moveStep.Equals(MoveStep.W03_SlowSendWire))
{
......@@ -148,10 +160,10 @@ namespace URSoldering.DeviceLibrary
else if (WeldMoveStep.moveStep.Equals(MoveStep.W12_ToClear2))
{
KeepTemp();
WeldMoveStep.NextMoveStep(MoveStep.W15_ClearEnd);
WeldMoveStep.NextMoveStep(MoveStep.W16_ClearEnd);
MoveToOrg();
}
else if (WeldMoveStep.moveStep.Equals(MoveStep.W15_ClearEnd))
else if (WeldMoveStep.moveStep.Equals(MoveStep.W16_ClearEnd))
{
WeldEnd();
}
......@@ -186,10 +198,18 @@ namespace URSoldering.DeviceLibrary
}
else if (WeldMoveStep.moveStep.Equals(MoveStep.W14_AOICheck))
{
WeldMoveStep.NextMoveStep(MoveStep.W15_AOIEnd);
AOIEnd = false;
WeldMoveStep.WaitList.Add(WaitResultInfo.WaitTime(3000));
WeldMoveStep.WaitList.Add(WaitResultInfo.WaitAoiEnd());
WeldMoveStep.OneWaitOk = true;
bool result = LastAOIResult = AOICheckFun.Invoke();
WeldLog("AOI检测结果：" + result);
Thread.Sleep(300);
WeldLog("AOI检测结果：" + result);
IsInWeld = false;
AOIEnd = true;
}else if (WeldMoveStep.moveStep.Equals(MoveStep.W15_AOIEnd))
{
if (WeldCount >= RobotConfig.ClearCount)
{
WeldLog("已经连续焊" + WeldCount + "块板子，清洗烙铁");
......@@ -214,64 +234,104 @@ namespace URSoldering.DeviceLibrary
else
{
SetPreTemp(true, false);
}
}
// 0=普通焊点，必须要焊接
if (WeldMoveStep.CurrPoint.pointType.Equals(0))
{
if (ZUpLiftValue>0)
{
//普通焊点先移动至高位
WeldMoveStep.NextMoveStep(MoveStep.W01_RobotToHighPoint);
LogUtil.info(" 新" + pointName + "移动至焊点高处");
WeldLog(" 新焊点 移动至焊点高处");
MoveToHighPoint(WeldMoveStep.CurrPoint);
}
else
{
LogUtil.info(" 新" + pointName + "预热" + WeldMoveStep.CurrPoint.preheatTemperature + "度，送丝下降，移动机械臂");
WeldLog(" 新焊点 预热" + WeldMoveStep.CurrPoint.preheatTemperature + "度，送丝下降，移动机械臂");
MoveToPoint(WeldMoveStep.CurrPoint);
WeldMoveStep.IsSlowSendWire = true;
SlowSendWire();
}
WorkCountManager.AddWeldPint();
}
// 2=拖焊焊点
else if (WeldMoveStep.CurrPoint.pointType.Equals(2))
{
LogUtil.info(" 新" + pointName + "预热" + WeldMoveStep.CurrPoint.preheatTemperature + "度，送丝下降，移动机械臂");
LogUtil.info(" 新焊点 预热" + WeldMoveStep.CurrPoint.preheatTemperature + "度，送丝下降，移动机械臂");
MoveToPoint(WeldMoveStep.CurrPoint );
WorkCountManager.AddWeldPint();
WeldMoveStep.IsSlowSendWire = true;
SlowSendWire();
}
else if(WeldMoveStep.CurrPoint.pointType.Equals(1))
// 1=中间点，机器人跳转位置使用
else if (WeldMoveStep.CurrPoint.pointType.Equals(1))
{
//拖焊点
LogUtil.info(" 新" + pointName + " 移动机械臂");
LogUtil.info(" 新焊点 移动机械臂");
MoveToPoint(WeldMoveStep.CurrPoint );
}else if (WeldMoveStep.CurrPoint.pointType.Equals(3))
}
// 3=拍照点，实现坐标偏移功能
else if (WeldMoveStep.CurrPoint.pointType.Equals(3))
{
//拍照点
MoveToPoint(WeldMoveStep.CurrPoint);
}
else
{
LogUtil.info(" 新" + pointName + " 未知焊点类型，跳过直接下一个焊点");
LogUtil.info(" 新焊点 未知焊点类型，跳过直接下一个焊点");
PointEndPross();
}
}
private static void LoadMarkInfo()
{
string defStr = ConfigAppSettings.GetValue(Setting_Init.MarkDefaultPosition);
if (defStr.Equals(""))
{
ConfigAppSettings.SaveValue(Setting_Init.MarkDefaultPosition, MarkImgPosition.ToJosonStr());
}
else
{
MarkImgPosition = PositionResult.ToObject(defStr);
}
MarkChangeValue = (double)ConfigAppSettings.GetNumValue(Setting_Init.PositionChangeValue);
if (MarkChangeValue <= 0)
{
MarkChangeValue = 1;
ConfigAppSettings.SaveValue(Setting_Init.PositionChangeValue, MarkChangeValue.ToString());
}
LogUtil.info("加载坐标偏移Mark点【"+ MarkImgPosition.ToJosonStr()+"】转换系数【"+MarkChangeValue+"】");
}
/// <summary>
/// 坐标偏移处理
/// </summary>
private static void PositionOffProcess()
{
List<PositionResult> result= PositionOffsetFun?.Invoke();
List<PositionResult> result = PositionOffsetFun?.Invoke();
if (result.Count > 0)
{
//TODO 坐标偏移
if (result.Count > 0)
{
double x = 0;
double y = 0;
PositionResult pianyiPosition = result[0];
x = (pianyiPosition.DataX - MarkImgPosition.DataX) * MarkChangeValue;
y = (pianyiPosition.DataY - MarkImgPosition.DataY) * MarkChangeValue;
WeldLog("找到偏移点，开始进行偏移 X【" + y + "】Y【" + y + "】");
WeldMoveStep.PositionOffSet(x, y);
}
}
else
{
WeldLog("未找到偏移点");
WeldLog("未找到偏移点，不需要进行偏移");
}
OffSetEnd = true;
}
private static void PointEndPross()
{
......@@ -461,12 +521,19 @@ namespace URSoldering.DeviceLibrary
string NotOkMsg = "";
if (list.Count > 0)
{
bool isOk = true;
bool isOk = !WeldMoveStep.OneWaitOk;
foreach (WaitResultInfo wait in list)
{
if (wait.IsEnd)
{
continue;
}
NotOkMsg = wait.ToStr();
if (wait.WaitType == 1)
{
if (!RobotBean.KNDIOValue(wait.IoType).Equals(wait.IoValue))
wait.IsEnd = RobotBean.KNDIOValue(wait.IoType).Equals(wait.IoValue);
if (!wait.IsEnd)
{
//一分钟还未检测到
if (span.TotalMilliseconds > ioSingleTimeOutSeconds)
......@@ -477,71 +544,23 @@ namespace URSoldering.DeviceLibrary
Alarm(AlarmType.IoSingleTimeOut);
LogUtil.error(LOGGER, WarnMsg, 13);
}
isOk = false;
break;
}
else if (WeldMoveStep.OneWaitOk)
{
isOk = true;
break;
}
}
else if (wait.WaitType == 2)
{
if (span.TotalMilliseconds < wait.TimeMSeconds)
{
NotOkMsg = "时间[" + wait.TimeMSeconds + "]毫秒";
isOk = false;
break;
}
else if (WeldMoveStep.OneWaitOk)
{
isOk = true;
break;
}
wait.IsEnd = (span.TotalMilliseconds > wait.TimeMSeconds);
}
else if (wait.WaitType == 3)
{
if (URRobotControl.MoveOK(wait.UrPoint, WeldMoveStep.LastSetpTime).Equals(false))
{
NotOkMsg = "机械臂移动到位"+wait.UrPoint.ToShowStr();
isOk = false;
break;
}
else if (WeldMoveStep.OneWaitOk)
{
isOk = true;
break;
}
wait.IsEnd = URRobotControl.MoveOK(wait.UrPoint, WeldMoveStep.LastSetpTime);
}
else if (wait.WaitType == 4)
{
if (!wait.IsEnd)
if (!HasSoldering)
{
if (HasSoldering)
{
int temp = SolderingManager.queryActualTemp();
if (wait.Temperature != temp && (temp < wait.TemperatureMin || temp > wait.TemperatureMax))
{
NotOkMsg = "烙铁温度[" + wait.Temperature + "]";
isOk = false;
break;
}
else
{
if (WeldMoveStep.OneWaitOk)
{
isOk = true;
break;
}
else
{
wait.IsEnd = true;
}
}
}
wait.IsEnd = true;
wait.IsEnd = true; continue;
}
wait.IsEnd = SolderingManager.IsRightTemp(wait.Temperature, wait.TemperatureMin, wait.TemperatureMax);
}
else if (wait.WaitType == 5)
{
......@@ -553,14 +572,13 @@ namespace URSoldering.DeviceLibrary
isAlarm = SendWireManager.IsAlarm();
preCheckSendWireTime = DateTime.Now;
if (isAlarm)
{
SendWireManager.StopSend();
WeldMoveStep.ResetCount++;
SendWireManager.Reset();
//反向送丝
int speed = ConfigAppSettings.GetIntValue(Setting_Init.ReverseSendWireSpeed) ;
int speed = ConfigAppSettings.GetIntValue(Setting_Init.ReverseSendWireSpeed);
double time = (double)ConfigAppSettings.GetNumValue(Setting_Init.ReverseSendWireTime);
if (speed.Equals(0) || time <= 0)
{
......@@ -584,25 +602,14 @@ namespace URSoldering.DeviceLibrary
if (wait.ShuoKeISReverse.Equals(false) && isAlarm.Equals(false))
{
if (span.TotalMilliseconds < wait.TimeMSeconds)
{
NotOkMsg = "送丝时间[" + wait.TimeMSeconds + "]毫秒";
isOk = false;
break;
}
else if (WeldMoveStep.OneWaitOk)
{
isOk = true;
break;
}
wait.IsEnd = (span.TotalMilliseconds >= wait.TimeMSeconds);
}
else if (wait.ShuoKeISReverse.Equals(true) && isAlarm.Equals(false))
{
if (span.TotalMilliseconds < wait.TimeMSeconds)
wait.IsEnd = (span.TotalMilliseconds >= wait.TimeMSeconds);
if (!wait.IsEnd)
{
NotOkMsg = "送丝时间[" + wait.TimeMSeconds + "]毫秒";
isOk = false;
break;
NotOkMsg = "反转送丝时间[" + wait.TimeMSeconds + "]毫秒";
}
else
{
......@@ -615,17 +622,26 @@ namespace URSoldering.DeviceLibrary
}
else if (wait.WaitType == 6)
{
if (!URRobotControl.IsRun)
{
NotOkMsg = "机器人连接";
isOk = false;
break;
}
else if (WeldMoveStep.OneWaitOk)
{
isOk = true;
break;
}
wait.IsEnd = URRobotControl.IsRun;
}
else if (wait.WaitType == 7)
{
wait.IsEnd = OffSetEnd;
}
else if (wait.WaitType == 8)
{
wait.IsEnd = AOIEnd;
}
if (wait.IsEnd && WeldMoveStep.OneWaitOk)
{
isOk = true;
break;
}
else if (wait.IsEnd.Equals(false) && WeldMoveStep.OneWaitOk.Equals(false))
{
isOk = false;
break;
}
}
if (isOk)
......@@ -647,12 +663,12 @@ namespace URSoldering.DeviceLibrary
else
{
WarnMsg = "等待超时[" + WeldMoveStep.moveType + "][" + WeldMoveStep.moveStep + "][" + NotOkMsg + "]已等待[" + Math.Round(span.TotalMinutes, 1) + "]分钟";
}
}
Alarm(AlarmType.StepTimeOut);
LogUtil.error(LOGGER, WarnMsg, 12);
//Alarm(StoreAlarmType.IoSingleTimeOut);
}
else if (span.TotalSeconds > 5 && WeldMoveStep.moveType.Equals(MoveType.Weld))
else if (span.TotalSeconds > 5 && WeldMoveStep.moveType.Equals(MoveType.Weld))
{
LogUtil.info("焊接[" + WeldMoveStep.moveStep + "][" + NotOkMsg + "]已等待[" + Math.Round(span.TotalSeconds, 1) + "]秒");
}
......@@ -664,13 +680,233 @@ namespace URSoldering.DeviceLibrary
}
}
//private static void CheckWait()
//{
// int ioSingleTimeOutSeconds = 10000;
// List<WaitResultInfo> list = new List<WaitResultInfo>(WeldMoveStep.WaitList);
// //当等待超过一分钟时，需要打印提示
// TimeSpan span = DateTime.Now - WeldMoveStep.LastSetpTime;
// string NotOkMsg = "";
// if (list.Count > 0)
// {
// bool isOk = true;
// foreach (WaitResultInfo wait in list)
// {
// if (wait.WaitType == 1)
// {
// if (!RobotBean.KNDIOValue(wait.IoType).Equals(wait.IoValue))
// {
// //一分钟还未检测到
// if (span.TotalMilliseconds > ioSingleTimeOutSeconds)
// {
// ConfigIO io = RobotBean.getWaitIO(wait.IoType);
// NotOkMsg = "信号（" + io.Explain + "=" + wait.IoValue + "）";
// WarnMsg = RobotName + " 等待信号（" + io.Explain + "=" + wait.IoValue + "） 超时！";
// Alarm(AlarmType.IoSingleTimeOut);
// LogUtil.error(LOGGER, WarnMsg, 13);
// }
// isOk = false;
// break;
// }
// else if (WeldMoveStep.OneWaitOk)
// {
// isOk = true;
// break;
// }
// }
// else if (wait.WaitType == 2)
// {
// if (span.TotalMilliseconds < wait.TimeMSeconds)
// {
// NotOkMsg = "时间[" + wait.TimeMSeconds + "]毫秒";
// isOk = false;
// break;
// }
// else if (WeldMoveStep.OneWaitOk)
// {
// isOk = true;
// break;
// }
// }
// else if (wait.WaitType == 3)
// {
// if (URRobotControl.MoveOK(wait.UrPoint, WeldMoveStep.LastSetpTime).Equals(false))
// {
// NotOkMsg = "机械臂移动到位" + wait.UrPoint.ToShowStr();
// isOk = false;
// break;
// }
// else if (WeldMoveStep.OneWaitOk)
// {
// isOk = true;
// break;
// }
// }
// else if (wait.WaitType == 4)
// {
// if (!wait.IsEnd)
// {
// if (HasSoldering)
// {
// int temp = SolderingManager.queryActualTemp();
// if (wait.Temperature != temp && (temp < wait.TemperatureMin || temp > wait.TemperatureMax))
// {
// NotOkMsg = "烙铁温度[" + wait.Temperature + "]";
// isOk = false;
// break;
// }
// else
// {
// if (WeldMoveStep.OneWaitOk)
// {
// isOk = true;
// break;
// }
// else
// {
// wait.IsEnd = true;
// }
// }
// }
// wait.IsEnd = true;
// }
// }
// else if (wait.WaitType == 5)
// {
// bool isAlarm = false;
// if (RobotManager.SolderingRobot.IsDebug.Equals(false))
// {
// if (WeldMoveStep.ResetCount < 3)
// {
// isAlarm = SendWireManager.IsAlarm();
// preCheckSendWireTime = DateTime.Now;
// if (isAlarm)
// {
// SendWireManager.StopSend();
// WeldMoveStep.ResetCount++;
// SendWireManager.Reset();
// //反向送丝
// int speed = ConfigAppSettings.GetIntValue(Setting_Init.ReverseSendWireSpeed);
// double time = (double)ConfigAppSettings.GetNumValue(Setting_Init.ReverseSendWireTime);
// if (speed.Equals(0) || time <= 0)
// {
// isAlarm = false;
// LogUtil.error("焊接中第【" + WeldMoveStep.ResetCount + "】次 检测到送丝器报警， 速度【" + speed + "】时间【" + time + "】配置不完整，不反转处理");
// }
// else
// {
// LogUtil.error("焊接中第【" + WeldMoveStep.ResetCount + "】次 检测到送丝器报警， 开始反向送丝，速度【" + speed + "】时间【" + time + "】");
// WeldMoveStep.LastSetpTime = DateTime.Now;
// WeldMoveStep.WaitList.Clear();
// SendWireManager.SendWireBack(time, speed);
// int ms = (int)((time * 1000) + 100);
// WeldMoveStep.WaitList.Add(WaitResultInfo.WaitSendWire(ms, true));
// isOk = false;
// }
// }
// }
// }
// if (wait.ShuoKeISReverse.Equals(false) && isAlarm.Equals(false))
// {
// if (span.TotalMilliseconds < wait.TimeMSeconds)
// {
// NotOkMsg = "送丝时间[" + wait.TimeMSeconds + "]毫秒";
// isOk = false;
// break;
// }
// else if (WeldMoveStep.OneWaitOk)
// {
// isOk = true;
// break;
// }
// }
// else if (wait.ShuoKeISReverse.Equals(true) && isAlarm.Equals(false))
// {
// if (span.TotalMilliseconds < wait.TimeMSeconds)
// {
// NotOkMsg = "送丝时间[" + wait.TimeMSeconds + "]毫秒";
// isOk = false;
// break;
// }
// else
// {
// //反转已经停止，直接重新运行次步骤
// //MoveStep step = (MoveStep)((int)WeldMoveStep.moveStep - 1);
// LogUtil.info(RobotName + " 送丝反转结束，重新开始当前焊点焊接");
// WeldMoveStep.NextMoveStep(MoveStep.Wait);
// }
// }
// }
// else if (wait.WaitType == 6)
// {
// if (!URRobotControl.IsRun)
// {
// NotOkMsg = "机器人连接";
// isOk = false;
// break;
// }
// else if (WeldMoveStep.OneWaitOk)
// {
// isOk = true;
// break;
// }
// }
// else if (wait.WaitType == 7)
// {
// wait.IsEnd = OffSetEnd;
// }
// else if (wait.WaitType == 8)
// {
// wait.IsEnd = AOIEnd;
// }
// }
// if (isOk)
// {
// WeldMoveStep.EndStepWait();
// }
// if (WeldMoveStep.IsInWait)
// {
// if (span.TotalMinutes > 1)
// {
// if (NotOkMsg.Equals(""))
// {
// WarnMsg = "等待超时[" + WeldMoveStep.moveType + "][" + WeldMoveStep.moveStep + "]已等待[" + Math.Round(span.TotalMinutes, 1) + "]分钟,";
// foreach (WaitResultInfo wait in list)
// {
// WarnMsg = WarnMsg + "\r\n" + wait.ToStr();
// }
// }
// else
// {
// WarnMsg = "等待超时[" + WeldMoveStep.moveType + "][" + WeldMoveStep.moveStep + "][" + NotOkMsg + "]已等待[" + Math.Round(span.TotalMinutes, 1) + "]分钟";
// }
// Alarm(AlarmType.StepTimeOut);
// LogUtil.error(LOGGER, WarnMsg, 12);
// //Alarm(StoreAlarmType.IoSingleTimeOut);
// }
// else if (span.TotalSeconds > 5 && WeldMoveStep.moveType.Equals(MoveType.Weld))
// {
// LogUtil.info("焊接[" + WeldMoveStep.moveStep + "][" + NotOkMsg + "]已等待[" + Math.Round(span.TotalSeconds, 1) + "]秒");
// }
// }
// }
// else
// {
// WeldMoveStep.EndStepWait();
// }
//}
private static void WeldLog(string str)
{
if (WeldMoveStep.moveType.Equals(MoveType.Weld))
{
if (WeldMoveStep.CurrPoint != null)
{
LogUtil.info("焊点"+WeldMoveStep.CurrPoint.TypeValue + "【" + WeldMoveStep.CurrPoint.pointName + "】" + str);
LogUtil.info( WeldMoveStep.CurrPoint.TypeValue + "【" + WeldMoveStep.CurrPoint.pointName + "】" + str);
}
else
{
......
DeviceLibrary/Robot/soldering/WeldStepBean.cs
......@@ -24,6 +24,16 @@ namespace URSoldering.DeviceLibrary
PointTime = null;
OneWaitOk = false;
}
public void PositionOffSet(double x, double y)
{
for (int i = 0; i < weldPointList.Count; i++)
{
string oldPosition = weldPointList[i].GetURPoint().ToShowStr();
weldPointList[i].RobotX += x;
weldPointList[i].RobotY += y;
LogUtil.info(weldPointList[i].pointName + "坐标偏移：偏移前【" + oldPosition + "】偏移后【" + weldPointList[i].GetURPoint().ToShowStr() + "】");
}
}
/// <summary>
/// 焊接的板子信息
/// </summary>
......@@ -102,27 +112,45 @@ namespace URSoldering.DeviceLibrary
NewWeld(type);
this.currBoard = board;
CurrPointIndex = 0;
//if (pointType.Equals(0))
//{
weldPointList = board.pointList;
//}
//else
//{
// weldPointList = (from m in board.pointList where m.pointType.Equals(pointType) && m.pointType.Equals(0) select m).ToList<WeldPointInfo>();
//}
//需要把拍照点放到第一个
WeldPointInfo photoPoint = null;
foreach(WeldPointInfo p in board.pointList)
{
if (!URRobotControl.PointIsValid(p.GetURPoint()))
{
LogUtil.error("【" + board.boardName + "】的焊点【" + p.pointName + "】坐标无效，无法开始焊接");
return false;
}
if (p.pointType.Equals(3))
{
photoPoint = p;
}
else
{
weldPointList.Add(p);
}
}
if (weldPointList.Count <= 0)
{
return false;
}
foreach(WeldPointInfo p in weldPointList)
if (photoPoint != null)
{
if (!URRobotControl.PointIsValid(p.GetURPoint()))
{
LogUtil.error("【"+ board .boardName+ "】的焊点【"+p.pointName+"】坐标无效，无法开始焊接");
return false;
}
weldPointList.Add(photoPoint);
}
//weldPointList = board.pointList;
//foreach(WeldPointInfo p in weldPointList)
//{
// if (!URRobotControl.PointIsValid(p.GetURPoint()))
// {
// LogUtil.error("【"+ board .boardName+ "】的焊点【"+p.pointName+"】坐标无效，无法开始焊接");
// return false;
// }
//}
CurrPoint = weldPointList[CurrPointIndex];
PointTime = new PointWeldTime();
ResetCount = 0;
......
DeviceLibrary/bean/AOIDataResult.cs
......@@ -2,17 +2,19 @@
using System.Collections.Generic;
using System.Linq;
using System.Text;
using URSoldering.Common;
namespace URSoldering.DeviceLibrary
{
/// <summary>
/// 从AOI获取的基准点坐标信息
/// </summary>
public class PositionResult
{
public PositionResult(double x, double y, int type, WeldPointInfo point)
public PositionResult(double x, double y )
{
this.DataX = x;
this.DataY = y;
this.DataType = type;
this.PointInfo = point;
this.DataY = y;
}
/// <summary>
/// 位置X
......@@ -22,13 +24,16 @@ namespace URSoldering.DeviceLibrary
/// 位置Y
/// </summary>
public double DataY = 0;
/// <summary>
/// 数据类型，1=少锡，2=多锡
/// </summary>
public int DataType = 0;
/// <summary>
/// 拍照点、基准点坐标
/// </summary>
public WeldPointInfo PointInfo = null;
public string ToJosonStr()
{
string jsonStr = JsonHelper.SerializeObject(this);
return jsonStr;
}
public static PositionResult ToObject(string json)
{
return JsonHelper.DeserializeJsonToObject<PositionResult>(json);
}
}
}
DeviceLibrary/deviceLibrary/jbc/SolderingManager.cs
......@@ -195,13 +195,20 @@ namespace URSoldering.DeviceLibrary
bool isOk = false;
byte[] minTemp = parseCommand("RMIT", out isOk);
return getReviceTemp(minTemp);
}
internal static void Init(object jBC_SerialPort, object jBC_EquipmentPort)
}
public static bool IsRightTemp(int temperature, int minTemp, int maxTemp)
{
throw new NotImplementedException();
int temp = SolderingManager.queryActualTemp();
if (temperature != temp && (temp < minTemp))
//if (wait.Temperature != temp && (temp < wait.TemperatureMin || temp > wait.TemperatureMax))
{
return false;
}
else
{
return true;
}
}
public static int ReadPortError()
{
if (IsRun)
......
DeviceLibrary/deviceLibrary/urRobot/URRobotControl.cs
......@@ -615,6 +615,20 @@ namespace URSoldering.DeviceLibrary
public double RY { get; set; }
public double RZ { get; set; }
/// <summary>
/// 坐标是否有效
/// </summary>
/// <returns></returns>
public bool IsValid()
{
if (X.Equals(0) && Y.Equals(0) && Z.Equals(0) && RX.Equals(0) && RY.Equals(0) && RZ.Equals(0))
{
return false;
}
return true;
}
public string ToShowStr()
{
return "[X: " + X + ",Y: " + Y + ",Z: " + Z + ",RX: " + RX + ",RY:" + RY + ",RZ:" + RZ + "]";
......@@ -630,8 +644,6 @@ namespace URSoldering.DeviceLibrary
{
return JsonHelper.DeserializeJsonToObject<URPointValue>(json);
}
}
}
public struct URStatus
{
......@@ -657,6 +669,7 @@ namespace URSoldering.DeviceLibrary
/// </summary>
public static string SFETY_POWER_OFF = "POWER_OFF";
}
}
URSolderingClient/App.config
......@@ -55,7 +55,13 @@
<add key="Soldering_RobotMin" value="{&quot;UpdateTime&quot;:&quot;2018-07-28T14:37:09.4700739+08:00&quot;,&quot;X&quot;:0.0,&quot;Y&quot;:0.0,&quot;Z&quot;:0.0,&quot;RX&quot;:0.0,&quot;RY&quot;:0.0,&quot;RZ&quot;:0.0}" />
<add key="Soldering_RobotMax" value="{&quot;UpdateTime&quot;:&quot;2018-07-28T14:37:09.4700739+08:00&quot;,&quot;X&quot;:0.0,&quot;Y&quot;:0.0,&quot;Z&quot;:0.0,&quot;RX&quot;:0.0,&quot;RY&quot;:0.0,&quot;RZ&quot;:0.0}" />
<add key="Soldering_MarkPoint" value="{&quot;UpdateTime&quot;:&quot;2018-07-28T14:37:09.4700739+08:00&quot;,&quot;X&quot;:0.0,&quot;Y&quot;:0.0,&quot;Z&quot;:0.0,&quot;RX&quot;:0.0,&quot;RY&quot;:0.0,&quot;RZ&quot;:0.0}" />
<add key="Config_Pwd" value="123456" />
<add key="Config_Pwd" value="123456" />
<!--坐标偏移Mark点的图像默认坐标-->
<add key="MarkDefaultPosition" value="{&quot;DataX&quot;:0.0,&quot;DataY&quot;:0.0}" />
<!--坐标偏移坐标转换系数，图片的1像素对应实际多少毫米-->
<add key="PositionChangeValue" value="1" />
<!--坐标偏移AOI检测的分支名称-->
<add key="OffSetNodeName" value="坐标偏移"/>
</appSettings>
<log4net>
<appender name="defaultAppender" type="log4net.Appender.RollingFileAppender">
......
URSolderingClient/FrmBoardInfo.Designer.cs
......@@ -369,7 +369,6 @@
this.dgvPoint.Location = new System.Drawing.Point(1080, 85);
this.dgvPoint.MultiSelect = false;
this.dgvPoint.Name = "dgvPoint";
this.dgvPoint.ReadOnly = true;
this.dgvPoint.RowHeadersWidth = 5;
this.dgvPoint.RowTemplate.Height = 23;
this.dgvPoint.SelectionMode = System.Windows.Forms.DataGridViewSelectionMode.FullRowSelect;
......@@ -1153,7 +1152,7 @@
//
this.cmbAoiFile.DropDownStyle = System.Windows.Forms.ComboBoxStyle.DropDownList;
this.cmbAoiFile.FormattingEnabled = true;
this.cmbAoiFile.Location = new System.Drawing.Point(340, 23);
this.cmbAoiFile.Location = new System.Drawing.Point(350, 23);
this.cmbAoiFile.Name = "cmbAoiFile";
this.cmbAoiFile.Size = new System.Drawing.Size(180, 25);
this.cmbAoiFile.TabIndex = 269;
......@@ -1161,7 +1160,7 @@
// label9
//
this.label9.AutoSize = true;
this.label9.Location = new System.Drawing.Point(256, 28);
this.label9.Location = new System.Drawing.Point(266, 28);
this.label9.Name = "label9";
this.label9.Size = new System.Drawing.Size(78, 17);
this.label9.TabIndex = 268;
......@@ -1179,7 +1178,7 @@
//
this.label25.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Left)));
this.label25.AutoSize = true;
this.label25.Location = new System.Drawing.Point(768, 28);
this.label25.Location = new System.Drawing.Point(788, 28);
this.label25.Name = "label25";
this.label25.Size = new System.Drawing.Size(42, 17);
this.label25.TabIndex = 37;
......@@ -1189,7 +1188,7 @@
//
this.label24.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Left)));
this.label24.AutoSize = true;
this.label24.Location = new System.Drawing.Point(631, 28);
this.label24.Location = new System.Drawing.Point(651, 28);
this.label24.Name = "label24";
this.label24.Size = new System.Drawing.Size(36, 17);
this.label24.TabIndex = 36;
......@@ -1209,7 +1208,7 @@
this.btnSave.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.btnSave.FlatAppearance.BorderSize = 0;
this.btnSave.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.btnSave.Location = new System.Drawing.Point(927, 16);
this.btnSave.Location = new System.Drawing.Point(939, 16);
this.btnSave.Name = "btnSave";
this.btnSave.Size = new System.Drawing.Size(117, 41);
this.btnSave.TabIndex = 40;
......@@ -1220,7 +1219,7 @@
// txtBoardLength
//
this.txtBoardLength.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Left)));
this.txtBoardLength.Location = new System.Drawing.Point(576, 25);
this.txtBoardLength.Location = new System.Drawing.Point(596, 25);
this.txtBoardLength.MaxLength = 8;
this.txtBoardLength.Name = "txtBoardLength";
this.txtBoardLength.Size = new System.Drawing.Size(53, 23);
......@@ -1231,7 +1230,7 @@
//
this.label4.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Left)));
this.label4.AutoSize = true;
this.label4.Location = new System.Drawing.Point(691, 28);
this.label4.Location = new System.Drawing.Point(711, 28);
this.label4.Name = "label4";
this.label4.Size = new System.Drawing.Size(20, 17);
this.label4.TabIndex = 5;
......@@ -1241,7 +1240,7 @@
//
this.label3.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Left)));
this.label3.AutoSize = true;
this.label3.Location = new System.Drawing.Point(554, 28);
this.label3.Location = new System.Drawing.Point(574, 28);
this.label3.Name = "label3";
this.label3.Size = new System.Drawing.Size(20, 17);
this.label3.TabIndex = 3;
......@@ -1250,7 +1249,7 @@
// txtBoardWidth
//
this.txtBoardWidth.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Bottom | System.Windows.Forms.AnchorStyles.Left)));
this.txtBoardWidth.Location = new System.Drawing.Point(713, 25);
this.txtBoardWidth.Location = new System.Drawing.Point(733, 25);
this.txtBoardWidth.MaxLength = 8;
this.txtBoardWidth.Name = "txtBoardWidth";
this.txtBoardWidth.Size = new System.Drawing.Size(53, 23);
......@@ -1306,41 +1305,42 @@
//
// Col_ID
//
this.Col_ID.HeaderText = "固定点";
this.Col_ID.HeaderText = "位置";
this.Col_ID.Name = "Col_ID";
this.Col_ID.ReadOnly = true;
this.Col_ID.Width = 90;
this.Col_ID.SortMode = System.Windows.Forms.DataGridViewColumnSortMode.NotSortable;
this.Col_ID.Width = 120;
//
// Col_X
//
this.Col_X.DataPropertyName = "RobotX";
this.Col_X.HeaderText = "X";
this.Col_X.Name = "Col_X";
this.Col_X.ReadOnly = true;
this.Col_X.Width = 68;
this.Col_X.SortMode = System.Windows.Forms.DataGridViewColumnSortMode.NotSortable;
this.Col_X.Width = 75;
//
// Col_Y
//
this.Col_Y.DataPropertyName = "RobotY";
this.Col_Y.HeaderText = "Y";
this.Col_Y.Name = "Col_Y";
this.Col_Y.ReadOnly = true;
this.Col_Y.Width = 68;
this.Col_Y.SortMode = System.Windows.Forms.DataGridViewColumnSortMode.NotSortable;
this.Col_Y.Width = 75;
//
// Col_Z
//
this.Col_Z.DataPropertyName = "RobotZ";
this.Col_Z.HeaderText = "Z";
this.Col_Z.Name = "Col_Z";
this.Col_Z.ReadOnly = true;
this.Col_Z.Width = 68;
this.Col_Z.SortMode = System.Windows.Forms.DataGridViewColumnSortMode.NotSortable;
this.Col_Z.Width = 75;
//
// Col_RX
//
this.Col_RX.DataPropertyName = "RobotRX";
this.Col_RX.HeaderText = "RX";
this.Col_RX.Name = "Col_RX";
this.Col_RX.ReadOnly = true;
this.Col_RX.SortMode = System.Windows.Forms.DataGridViewColumnSortMode.NotSortable;
this.Col_RX.Width = 75;
//
// Col_RY
......@@ -1348,7 +1348,7 @@
this.Col_RY.DataPropertyName = "RobotRY";
this.Col_RY.HeaderText = "RY";
this.Col_RY.Name = "Col_RY";
this.Col_RY.ReadOnly = true;
this.Col_RY.SortMode = System.Windows.Forms.DataGridViewColumnSortMode.NotSortable;
this.Col_RY.Width = 75;
//
// Col_RZ
......@@ -1356,7 +1356,7 @@
this.Col_RZ.DataPropertyName = "RobotRZ";
this.Col_RZ.HeaderText = "RZ";
this.Col_RZ.Name = "Col_RZ";
this.Col_RZ.ReadOnly = true;
this.Col_RZ.SortMode = System.Windows.Forms.DataGridViewColumnSortMode.NotSortable;
this.Col_RZ.Width = 75;
//
// Col_Update
......@@ -1378,6 +1378,7 @@
this.Col_Move.Text = "移动测试";
this.Col_Move.ToolTipText = "移动测试";
this.Col_Move.UseColumnTextForLinkValue = true;
this.Col_Move.Width = 75;
//
// FrmBoardInfo
//
......
URSolderingClient/FrmBoardInfo.cs
......@@ -243,10 +243,10 @@ namespace URSoldering.Client
}
}
dgvPoint.Rows.Add(setFPoint(null, "固定点A", updateBoardInfo.APointValue));
dgvPoint.Rows.Add(setFPoint(null, "固定点B", updateBoardInfo.BPointValue));
dgvPoint.Rows.Add(setFPoint(null, "固定点C", updateBoardInfo.CPointValue));
dgvPoint.Rows.Add(setFPoint(null, "固定点D", updateBoardInfo.DPointValue));
dgvPoint.Rows.Add(setFPoint(null, "固定点A（左上角）", updateBoardInfo.APointValue));
dgvPoint.Rows.Add(setFPoint(null, "固定点B（左下角）", updateBoardInfo.BPointValue));
dgvPoint.Rows.Add(setFPoint(null, "固定点C（右上角）", updateBoardInfo.CPointValue));
dgvPoint.Rows.Add(setFPoint(null, "固定点D（右下角）", updateBoardInfo.DPointValue));
}
private DataGridViewRow setPointInfo(DataGridViewRow view, WeldPointInfo point)
{
......@@ -806,10 +806,9 @@ namespace URSoldering.Client
{
openFileDialog1.Tag = true;
picBoard.Image = Image.FromFile(openFileDialog1.FileName);
if (this.txtBoardWidth.Text.Trim() != "" && this.txtBoardLength.Text.Trim() != "")
{
loadPictureBoxSize();
}
}
}
......@@ -817,6 +816,10 @@ namespace URSoldering.Client
//private float imageXiShu = 1;
private void loadPictureBoxSize()
{
if (this.txtBoardWidth.Text.Trim() == "" || this.txtBoardLength.Text.Trim() == "")
{
return;
}
picBoard.SizeMode = PictureBoxSizeMode.StretchImage;
int width = 0;
int height = 0;
......@@ -860,28 +863,31 @@ namespace URSoldering.Client
int index = 0;
foreach (WeldPointInfo weld in pointList)
{
//float x = (float)Math.Abs(weld.PositionX - orgX) * imageXiShu;
//float y = (float)Math.Abs(weld.PositionY - orgY) * imageXiShu;
int pointHight = 16;
float x, y;
GetPicPointByUrPoint(weld.GetURPoint(), out x, out y);
//LogUtil.debug("显示焊点：X【" + x + "】Y【" + y + "】,坐标X【" + weld.PositionX + "】坐标Y【" + weld.PositionY + "】");
//g.FillEllipse(Brushes.Red, x - pointHight / 2, y - pointHight / 2, pointHight, pointHight);
//if (index > 0)
//{
// Pen p = new Pen(Color.Red, 2);
LogUtil.debug("显示焊点：X【" + x + "】Y【" + y + "】,坐标X【" + weld.RobotX + "】坐标Y【" + weld.RobotY + "】");
g.FillEllipse(Brushes.Red, x - pointHight / 2, y - pointHight / 2, pointHight, pointHight);
if (index > 0)
{
Pen p = new Pen(Color.Red, 1);
// //中间点
// float xCenter = (preX + x) / 2;
// float yCenter = (preY + y) / 2;
// System.Drawing.Drawing2D.AdjustableArrowCap lineCap = new System.Drawing.Drawing2D.AdjustableArrowCap(6, 8, true);
// Pen RedPen = new Pen(Color.Red, 2);
// RedPen.CustomEndCap = lineCap;
//中间点
float xCenter = (preX + x) / 2;
float yCenter = (preY + y) / 2;
System.Drawing.Drawing2D.AdjustableArrowCap lineCap = new System.Drawing.Drawing2D.AdjustableArrowCap(6, 8, true);
Pen RedPen = new Pen(Color.Red, 1);
RedPen.CustomEndCap = lineCap;
// grfx.DrawLine(RedPen, preX, preY, xCenter, yCenter);
// grfx.DrawLine(p, preX, preY, x, y);
//}
//preX = x;
//preY = y;
//index++;
grfx.DrawLine(RedPen, preX, preY, xCenter, yCenter);
grfx.DrawLine(p, preX, preY, x, y);
}
//写字
g.DrawString(weld.pointName, new Font("Arial ", 8, FontStyle.Regular), Brushes.Red, x - pointHight / 2, y + pointHight / 2+2);
preX = x;
preY = y;
index++;
}
grfx.SmoothingMode = SmoothingMode.HighQuality;
......@@ -894,13 +900,10 @@ namespace URSoldering.Client
g.Dispose();
//picBoard.Refresh();
}
private void dgvList_CellValueChanged(object sender, DataGridViewCellEventArgs e)
{
if (this.txtBoardWidth.Text.Trim() != "" && this.txtBoardLength.Text.Trim() != "")
{
loadPictureBoxSize();
}
loadPictureBoxSize();
}
private void txtOriginX_TextChanged(object sender, EventArgs e)
......@@ -1018,10 +1021,76 @@ namespace URSoldering.Client
}
private void 保存焊点ToolStripMenuItem_Click(object sender, EventArgs e)
{
{
if (m_MouseDownPoint == null || m_MouseDownPoint.X == 0 || m_MouseDownPoint.Y == 0)
{
MessageBox.Show("请点击要保存的焊点");
return;
}
double x = 0;
double y = 0;
URPointValue point = GetUrPointByPicPoint( );
LogUtil.info("新增焊点：X【" + m_MouseDownPoint.X + "】Y【" + m_MouseDownPoint.Y + "】,坐标 【" + point.ToShowStr() + "】 ");
AddNewPoint(point);
liUpdateTime_LinkClicked(null, null);
}
private void GetPicPointByUrPoint(URPointValue point, out float x, out float y)
{
int width = picBoard.Width;
int height = picBoard.Height;
URPointValue APointValue = GetFRowPoint(0);
URPointValue BPointValue = GetFRowPoint(1);
URPointValue CPointValue = GetFRowPoint(2);
URPointValue DPointValue = GetFRowPoint(3);
//判断AD点是否有效
if (APointValue.IsValid() && DPointValue.IsValid())
{
x = (float)((point.X-APointValue.X) * width / (DPointValue.X - APointValue.X));
y = (float)((point.Y-APointValue.Y) * height / (DPointValue.Y - APointValue.Y));
}
else if (BPointValue.IsValid() && CPointValue.IsValid())
{
x = (float)((point.X-BPointValue.X) * width / (CPointValue.X - BPointValue.X));
y = (float)((point.Y-CPointValue.Y) * height / (BPointValue.Y - CPointValue.Y));
}
else
{
x = -1;
y = -1;
}
}
private URPointValue GetUrPointByPicPoint( )
{
URPointValue currPoint = GetCurrRobotPoint();
URPointValue point = new URPointValue(0, 0, currPoint.Z, currPoint.RX, currPoint.RY, currPoint.RZ);
URPointValue APointValue = GetFRowPoint(0);
URPointValue BPointValue = GetFRowPoint(1);
URPointValue CPointValue = GetFRowPoint(2);
URPointValue DPointValue = GetFRowPoint(3);
int width = picBoard.Width;
int height = picBoard.Height;
//判断AD点是否有效
if (APointValue.IsValid() && DPointValue.IsValid())
{
double x = APointValue.X + m_MouseDownPoint.X * (DPointValue.X - APointValue.X) / width;
double y= APointValue.Y+m_MouseDownPoint.Y*(DPointValue.Y - APointValue.Y) / height;
point.X = x;
point.Y = y;
}else if (BPointValue.IsValid() && CPointValue.IsValid())
{
double x =BPointValue.X+ m_MouseDownPoint.X * (CPointValue.X - BPointValue.X) / width;
double y =CPointValue.Y+ m_MouseDownPoint.Y * (BPointValue.Y - CPointValue.Y) / height;
point.X = x;
point.Y = y;
}
return point;
}
private void AddNewPoint(URPointValue robotP)
{
......
URSolderingClient/FrmBoardList.cs
......@@ -7,6 +7,8 @@ using System.Drawing;
using System.Linq;
using System.Reflection;
using System.Windows.Forms;
using URSoldering.Common;
using System.Drawing.Drawing2D;
namespace URSoldering.Client
{
......@@ -160,7 +162,32 @@ namespace URSoldering.Client
MessageBox.Show("请选择程序！");
}
}
private void GetPicPointByUrPoint(BoardInfo boardInfo ,URPointValue point, out float x, out float y)
{
int width = picBoard.Width;
int height = picBoard.Height;
URPointValue APointValue = boardInfo.APointValue;
URPointValue BPointValue = boardInfo.BPointValue;
URPointValue CPointValue = boardInfo.CPointValue;
URPointValue DPointValue = boardInfo.DPointValue;
//判断AD点是否有效
if (APointValue.IsValid() && DPointValue.IsValid())
{
x = (float)((point.X-APointValue.X) * width / (DPointValue.X - APointValue.X));
y = (float)((point.Y-APointValue.Y) * height / (DPointValue.Y - APointValue.Y));
}
else if (BPointValue.IsValid() && CPointValue.IsValid())
{
x = (float)((point.X-BPointValue.X) * width / (CPointValue.X - BPointValue.X));
y = (float)((point.Y-CPointValue.Y) * height / (BPointValue.Y - CPointValue.Y));
}
else
{
x = -1;
y = -1;
}
}
private void loadPictureBoxSize(BoardInfo board)
{
picBoard.SizeMode = PictureBoxSizeMode.StretchImage;
......@@ -194,38 +221,47 @@ namespace URSoldering.Client
picBoard.Image = board.GetImage();
picBoard.Refresh();
//int orgType = board.orgType;
//double orgX = board.getImageOrgX();
//double orgY = board.getImageOrgY();
//Graphics grfx = picBoard.CreateGraphics();
//float preX = 0;
//float preY = 0;
//int index = 0;
//foreach (WeldPointInfo weld in pointList)
//{
//float x = (float)Math.Abs(weld.PositionX - orgX) * picBoard.Width / width - pointHight / 2;
//float y = (float)Math.Abs(weld.PositionY - orgY) * picBoard.Width / width - pointHight / 2;
//g.FillEllipse(Brushes.Red, x - pointHight / 2, y - pointHight / 2, pointHight, pointHight);
//if (index > 0)
//{
// Pen p = new Pen(Color.Red, 2);
// //中间点
// float xCenter = (preX + x) / 2;
// float yCenter = (preY + y) / 2;
// System.Drawing.Drawing2D.AdjustableArrowCap lineCap = new System.Drawing.Drawing2D.AdjustableArrowCap(6, 8, true);
// Pen RedPen = new Pen(Color.Red, 2);
// RedPen.CustomEndCap = lineCap;
Graphics grfx = picBoard.CreateGraphics();
float preX = 0;
float preY = 0;
int index = 0;
foreach (WeldPointInfo weld in pointList)
{
int pointHight = 16;
float x, y;
GetPicPointByUrPoint(board,weld.GetURPoint(), out x, out y);
LogUtil.debug("显示焊点：X【" + x + "】Y【" + y + "】,坐标X【" + weld.RobotX + "】坐标Y【" + weld.RobotY + "】");
g.FillEllipse(Brushes.Red, x - pointHight / 2, y - pointHight / 2, pointHight, pointHight);
if (index > 0)
{
Pen p = new Pen(Color.Red, 1);
//中间点
float xCenter = (preX + x) / 2;
float yCenter = (preY + y) / 2;
System.Drawing.Drawing2D.AdjustableArrowCap lineCap = new System.Drawing.Drawing2D.AdjustableArrowCap(6, 8, true);
Pen RedPen = new Pen(Color.Red, 1);
RedPen.CustomEndCap = lineCap;
grfx.DrawLine(RedPen, preX, preY, xCenter, yCenter);
grfx.DrawLine(p, preX, preY, x, y);
}
//写字
g.DrawString(weld.pointName, new Font("Arial ", 10, FontStyle.Bold), Brushes.Red, x - pointHight / 2, y + pointHight / 2 + 2);
preX = x;
preY = y;
index++;
}
// grfx.DrawLine(RedPen, preX, preY, xCenter, yCenter);
// grfx.DrawLine(p, preX, preY, x, y);
//}
//preX = x;
//preY = y;
//index++;
//g.FillEllipse(Brushes.Red, x, y, pointHight, pointHight);
//}
grfx.SmoothingMode = SmoothingMode.HighQuality;
g.DrawString("A ", new Font("Arial ", 10, FontStyle.Bold), Brushes.White, 3, 3);
g.DrawString("B ", new Font("Arial ", 10, FontStyle.Bold), Brushes.White, 3, picBoard.Height - 20);
g.DrawString("C ", new Font("Arial ", 10, FontStyle.Bold), Brushes.White, picBoard.Width - 18, 0);
g.DrawString("D ", new Font("Arial ", 10, FontStyle.Bold), Brushes.White, picBoard.Width - 18, picBoard.Height - 20);
//g.Dispose();
g.Dispose();
}
private void FrmBoardList_Shown(object sender, EventArgs e)
......
URSolderingClient/FrmSetting.Designer.cs
......@@ -51,6 +51,11 @@
this.minControl = new UserFromControl.URRobotMControl();
this.groupBox6 = new System.Windows.Forms.GroupBox();
this.markControl = new UserFromControl.URRobotMControl();
this.groupBox7 = new System.Windows.Forms.GroupBox();
this.txtMarkX = new System.Windows.Forms.TextBox();
this.label1 = new System.Windows.Forms.Label();
this.txtMarkY = new System.Windows.Forms.TextBox();
this.label2 = new System.Windows.Forms.Label();
this.groupBox3.SuspendLayout();
this.groupBox2.SuspendLayout();
this.groupBox4.SuspendLayout();
......@@ -58,44 +63,45 @@
this.gbEpsonSetting.SuspendLayout();
this.groupBox5.SuspendLayout();
this.groupBox6.SuspendLayout();
this.groupBox7.SuspendLayout();
this.SuspendLayout();
//
// groupBox3
//
this.groupBox3.Controls.Add(this.clear2Control);
this.groupBox3.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.groupBox3.Location = new System.Drawing.Point(447, 12);
this.groupBox3.Location = new System.Drawing.Point(387, 12);
this.groupBox3.Name = "groupBox3";
this.groupBox3.Size = new System.Drawing.Size(197, 265);
this.groupBox3.Size = new System.Drawing.Size(177, 255);
this.groupBox3.TabIndex = 40;
this.groupBox3.TabStop = false;
this.groupBox3.Text = "焊接清洗点2配置";
//
// clear2Control
//
this.clear2Control.Location = new System.Drawing.Point(24, 20);
this.clear2Control.Location = new System.Drawing.Point(6, 20);
this.clear2Control.Margin = new System.Windows.Forms.Padding(3, 6, 3, 6);
this.clear2Control.Name = "clear2Control";
this.clear2Control.Size = new System.Drawing.Size(168, 236);
this.clear2Control.Size = new System.Drawing.Size(162, 227);
this.clear2Control.TabIndex = 2;
//
// groupBox2
//
this.groupBox2.Controls.Add(this.clear1Control);
this.groupBox2.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.groupBox2.Location = new System.Drawing.Point(234, 12);
this.groupBox2.Location = new System.Drawing.Point(204, 12);
this.groupBox2.Name = "groupBox2";
this.groupBox2.Size = new System.Drawing.Size(197, 265);
this.groupBox2.Size = new System.Drawing.Size(177, 255);
this.groupBox2.TabIndex = 12;
this.groupBox2.TabStop = false;
this.groupBox2.Text = "焊接清洗点1配置";
//
// clear1Control
//
this.clear1Control.Location = new System.Drawing.Point(7, 23);
this.clear1Control.Location = new System.Drawing.Point(6, 20);
this.clear1Control.Margin = new System.Windows.Forms.Padding(3, 4, 3, 4);
this.clear1Control.Name = "clear1Control";
this.clear1Control.Size = new System.Drawing.Size(168, 236);
this.clear1Control.Size = new System.Drawing.Size(162, 227);
this.clear1Control.TabIndex = 0;
//
// groupBox4
......@@ -107,9 +113,9 @@
this.groupBox4.Controls.Add(this.lblWirdFeedingTime);
this.groupBox4.Controls.Add(this.txtsendWireTime);
this.groupBox4.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.groupBox4.Location = new System.Drawing.Point(440, 282);
this.groupBox4.Location = new System.Drawing.Point(387, 343);
this.groupBox4.Name = "groupBox4";
this.groupBox4.Size = new System.Drawing.Size(276, 118);
this.groupBox4.Size = new System.Drawing.Size(360, 107);
this.groupBox4.TabIndex = 11;
this.groupBox4.TabStop = false;
this.groupBox4.Text = "卡丝时反转配置";
......@@ -117,7 +123,7 @@
// label17
//
this.label17.AutoSize = true;
this.label17.Location = new System.Drawing.Point(220, 38);
this.label17.Location = new System.Drawing.Point(220, 35);
this.label17.Name = "label17";
this.label17.Size = new System.Drawing.Size(30, 17);
this.label17.TabIndex = 64;
......@@ -126,7 +132,7 @@
// label18
//
this.label18.AutoSize = true;
this.label18.Location = new System.Drawing.Point(221, 77);
this.label18.Location = new System.Drawing.Point(221, 74);
this.label18.Name = "label18";
this.label18.Size = new System.Drawing.Size(14, 17);
this.label18.TabIndex = 63;
......@@ -135,7 +141,7 @@
// lblWirdFeedingSpeed
//
this.lblWirdFeedingSpeed.AutoSize = true;
this.lblWirdFeedingSpeed.Location = new System.Drawing.Point(15, 32);
this.lblWirdFeedingSpeed.Location = new System.Drawing.Point(15, 29);
this.lblWirdFeedingSpeed.Name = "lblWirdFeedingSpeed";
this.lblWirdFeedingSpeed.Size = new System.Drawing.Size(92, 17);
this.lblWirdFeedingSpeed.TabIndex = 59;
......@@ -143,7 +149,7 @@
//
// txtsendWireSpeed
//
this.txtsendWireSpeed.Location = new System.Drawing.Point(118, 32);
this.txtsendWireSpeed.Location = new System.Drawing.Point(118, 29);
this.txtsendWireSpeed.MaxLength = 6;
this.txtsendWireSpeed.Name = "txtsendWireSpeed";
this.txtsendWireSpeed.Size = new System.Drawing.Size(96, 23);
......@@ -152,7 +158,7 @@
// lblWirdFeedingTime
//
this.lblWirdFeedingTime.AutoSize = true;
this.lblWirdFeedingTime.Location = new System.Drawing.Point(15, 72);
this.lblWirdFeedingTime.Location = new System.Drawing.Point(15, 69);
this.lblWirdFeedingTime.Name = "lblWirdFeedingTime";
this.lblWirdFeedingTime.Size = new System.Drawing.Size(92, 17);
this.lblWirdFeedingTime.TabIndex = 61;
......@@ -160,7 +166,7 @@
//
// txtsendWireTime
//
this.txtsendWireTime.Location = new System.Drawing.Point(118, 72);
this.txtsendWireTime.Location = new System.Drawing.Point(118, 69);
this.txtsendWireTime.MaxLength = 6;
this.txtsendWireTime.Name = "txtsendWireTime";
this.txtsendWireTime.Size = new System.Drawing.Size(96, 23);
......@@ -172,23 +178,23 @@
this.groupBox1.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.groupBox1.Location = new System.Drawing.Point(21, 12);
this.groupBox1.Name = "groupBox1";
this.groupBox1.Size = new System.Drawing.Size(197, 265);
this.groupBox1.Size = new System.Drawing.Size(177, 255);
this.groupBox1.TabIndex = 8;
this.groupBox1.TabStop = false;
this.groupBox1.Text = "机器人待机点配置";
//
// homeControl
//
this.homeControl.Location = new System.Drawing.Point(12, 23);
this.homeControl.Location = new System.Drawing.Point(6, 20);
this.homeControl.Margin = new System.Windows.Forms.Padding(3, 6, 3, 6);
this.homeControl.Name = "homeControl";
this.homeControl.Size = new System.Drawing.Size(168, 236);
this.homeControl.Size = new System.Drawing.Size(162, 227);
this.homeControl.TabIndex = 1;
//
// btnClose
//
this.btnClose.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.btnClose.Location = new System.Drawing.Point(599, 502);
this.btnClose.Location = new System.Drawing.Point(568, 543);
this.btnClose.Name = "btnClose";
this.btnClose.Size = new System.Drawing.Size(117, 35);
this.btnClose.TabIndex = 7;
......@@ -199,7 +205,7 @@
// btnSaveSetting
//
this.btnSaveSetting.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.btnSaveSetting.Location = new System.Drawing.Point(458, 502);
this.btnSaveSetting.Location = new System.Drawing.Point(427, 543);
this.btnSaveSetting.Name = "btnSaveSetting";
this.btnSaveSetting.Size = new System.Drawing.Size(117, 35);
this.btnSaveSetting.TabIndex = 6;
......@@ -212,16 +218,16 @@
this.gbEpsonSetting.Controls.Add(this.txtLimZ);
this.gbEpsonSetting.Controls.Add(this.label8);
this.gbEpsonSetting.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.gbEpsonSetting.Location = new System.Drawing.Point(440, 404);
this.gbEpsonSetting.Location = new System.Drawing.Point(387, 456);
this.gbEpsonSetting.Name = "gbEpsonSetting";
this.gbEpsonSetting.Size = new System.Drawing.Size(276, 80);
this.gbEpsonSetting.Size = new System.Drawing.Size(360, 69);
this.gbEpsonSetting.TabIndex = 1;
this.gbEpsonSetting.TabStop = false;
this.gbEpsonSetting.Text = "机器人Z轴最低点";
//
// txtLimZ
//
this.txtLimZ.Location = new System.Drawing.Point(107, 35);
this.txtLimZ.Location = new System.Drawing.Point(107, 29);
this.txtLimZ.Name = "txtLimZ";
this.txtLimZ.Size = new System.Drawing.Size(133, 23);
this.txtLimZ.TabIndex = 7;
......@@ -229,7 +235,7 @@
// label8
//
this.label8.AutoSize = true;
this.label8.Location = new System.Drawing.Point(17, 39);
this.label8.Location = new System.Drawing.Point(17, 33);
this.label8.Name = "label8";
this.label8.Size = new System.Drawing.Size(63, 17);
this.label8.TabIndex = 6;
......@@ -240,53 +246,100 @@
this.groupBox5.Controls.Add(this.maxControl);
this.groupBox5.Controls.Add(this.minControl);
this.groupBox5.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.groupBox5.Location = new System.Drawing.Point(21, 282);
this.groupBox5.Location = new System.Drawing.Point(21, 270);
this.groupBox5.Name = "groupBox5";
this.groupBox5.Size = new System.Drawing.Size(400, 249);
this.groupBox5.Size = new System.Drawing.Size(357, 256);
this.groupBox5.TabIndex = 42;
this.groupBox5.TabStop = false;
this.groupBox5.Text = "机械臂活动范围";
//
// maxControl
//
this.maxControl.Location = new System.Drawing.Point(199, 25);
this.maxControl.Location = new System.Drawing.Point(173, 25);
this.maxControl.Margin = new System.Windows.Forms.Padding(3, 6, 3, 6);
this.maxControl.Name = "maxControl";
this.maxControl.Size = new System.Drawing.Size(168, 226);
this.maxControl.Size = new System.Drawing.Size(160, 217);
this.maxControl.TabIndex = 3;
//
// minControl
//
this.minControl.Location = new System.Drawing.Point(12, 25);
this.minControl.Location = new System.Drawing.Point(7, 25);
this.minControl.Margin = new System.Windows.Forms.Padding(3, 6, 3, 6);
this.minControl.Name = "minControl";
this.minControl.Size = new System.Drawing.Size(168, 226);
this.minControl.Size = new System.Drawing.Size(160, 217);
this.minControl.TabIndex = 2;
//
// groupBox6
//
this.groupBox6.Controls.Add(this.markControl);
this.groupBox6.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.groupBox6.Location = new System.Drawing.Point(660, 12);
this.groupBox6.Location = new System.Drawing.Point(570, 12);
this.groupBox6.Name = "groupBox6";
this.groupBox6.Size = new System.Drawing.Size(197, 265);
this.groupBox6.Size = new System.Drawing.Size(177, 255);
this.groupBox6.TabIndex = 43;
this.groupBox6.TabStop = false;
this.groupBox6.Text = "坐标偏移Mark点配置";
//
// markControl
//
this.markControl.Location = new System.Drawing.Point(24, 20);
this.markControl.Location = new System.Drawing.Point(6, 20);
this.markControl.Margin = new System.Windows.Forms.Padding(3, 6, 3, 6);
this.markControl.Name = "markControl";
this.markControl.Size = new System.Drawing.Size(168, 236);
this.markControl.Size = new System.Drawing.Size(162, 227);
this.markControl.TabIndex = 2;
//
// groupBox7
//
this.groupBox7.Controls.Add(this.txtMarkY);
this.groupBox7.Controls.Add(this.label2);
this.groupBox7.Controls.Add(this.txtMarkX);
this.groupBox7.Controls.Add(this.label1);
this.groupBox7.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.groupBox7.Location = new System.Drawing.Point(387, 270);
this.groupBox7.Name = "groupBox7";
this.groupBox7.Size = new System.Drawing.Size(360, 67);
this.groupBox7.TabIndex = 44;
this.groupBox7.TabStop = false;
this.groupBox7.Text = "坐标偏移Mark点的图片坐标";
//
// txtMarkX
//
this.txtMarkX.Location = new System.Drawing.Point(51, 27);
this.txtMarkX.Name = "txtMarkX";
this.txtMarkX.Size = new System.Drawing.Size(106, 23);
this.txtMarkX.TabIndex = 7;
//
// label1
//
this.label1.AutoSize = true;
this.label1.Location = new System.Drawing.Point(17, 30);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(28, 17);
this.label1.TabIndex = 6;
this.label1.Text = "X：";
//
// txtMarkY
//
this.txtMarkY.Location = new System.Drawing.Point(212, 27);
this.txtMarkY.Name = "txtMarkY";
this.txtMarkY.Size = new System.Drawing.Size(106, 23);
this.txtMarkY.TabIndex = 9;
//
// label2
//
this.label2.AutoSize = true;
this.label2.Location = new System.Drawing.Point(178, 30);
this.label2.Name = "label2";
this.label2.Size = new System.Drawing.Size(27, 17);
this.label2.TabIndex = 8;
this.label2.Text = "Y：";
//
// FrmSetting
//
this.AutoScaleDimensions = new System.Drawing.SizeF(7F, 17F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(871, 555);
this.ClientSize = new System.Drawing.Size(789, 587);
this.Controls.Add(this.groupBox7);
this.Controls.Add(this.groupBox6);
this.Controls.Add(this.groupBox5);
this.Controls.Add(this.groupBox3);
......@@ -308,6 +361,8 @@
this.gbEpsonSetting.PerformLayout();
this.groupBox5.ResumeLayout(false);
this.groupBox6.ResumeLayout(false);
this.groupBox7.ResumeLayout(false);
this.groupBox7.PerformLayout();
this.ResumeLayout(false);
}
......@@ -336,5 +391,10 @@
private UserFromControl.URRobotMControl minControl;
private System.Windows.Forms.GroupBox groupBox6;
private UserFromControl.URRobotMControl markControl;
private System.Windows.Forms.GroupBox groupBox7;
private System.Windows.Forms.TextBox txtMarkX;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.TextBox txtMarkY;
private System.Windows.Forms.Label label2;
}
}
\ No newline at end of file
URSolderingClient/FrmSetting.cs
......@@ -38,6 +38,9 @@ namespace URSoldering.Client
clear1Control.ShowPoint(WeldRobotBean.Clear1Point);
homeControl.ShowPoint(WeldRobotBean.HomePoint);
markControl.ShowPoint(WeldRobotBean.MarkPoint);
txtMarkX.Text = WeldRobotBean.MarkImgPosition.DataX.ToString();
txtMarkY.Text = WeldRobotBean.MarkImgPosition.DataY.ToString();
}
private void saveValue()
......@@ -102,7 +105,7 @@ namespace URSoldering.Client
URPointValue minP = minControl.GetPoint();
URPointValue maxP = maxControl.GetPoint();
//if (XMin > XMax)
//{
// MessageBox.Show("请正确输入机械臂X轴范围！");
......@@ -132,6 +135,18 @@ namespace URSoldering.Client
// return;
//}
int x = FormUtil.GetIntValue(txtMarkX);
int y = FormUtil.GetIntValue(txtMarkY);
if (x <= 0 || y <= 0)
{
MessageBox.Show("请输入正确的Mark的图片坐标");
txtMarkX.Focus();
return;
}
WeldRobotBean.MarkImgPosition = new PositionResult(x, y);
ConfigAppSettings.SaveValue(Setting_Init.MarkDefaultPosition, WeldRobotBean.MarkImgPosition.ToJosonStr());
WeldRobotBean.UpdateOrgPoint(homeP);
WeldRobotBean.UpdateClear1Point(clear1P);
WeldRobotBean.UpdateClear2Point(clear2P);
......@@ -150,8 +165,9 @@ namespace URSoldering.Client
ConfigAppSettings.SaveValue(Setting_Init.Soldering_RobotMax, maxP.ToJosonStr());
URPointValue markPoint = markControl.GetPoint();
WeldRobotBean.MarkPoint = markPoint;
ConfigAppSettings.SaveValue(Setting_Init.Soldering_MarkPoint, markPoint.ToJosonStr());
WeldRobotBean.UpdateMarkPoint(markPoint);
//WeldRobotBean.MarkPoint = markPoint;
//ConfigAppSettings.SaveValue(Setting_Init.Soldering_MarkPoint, markPoint.ToJosonStr());
MessageBox.Show("保存成功，需要重启之后才能生效！");
this.Close();
......
URSolderingClient/FrmWork.cs
......@@ -684,10 +684,7 @@ namespace URSoldering.Client
axCKVisionCtrl1.Execute(num);
axCKVisionCtrl1.ZoomView(2);
axCKVisionCtrl1.Redraw();
Thread.Sleep(1000);
axCKVisionCtrl1.Execute(num);
axCKVisionCtrl1.ZoomView(2);
axCKVisionCtrl1.Redraw();
return true;
}
catch (Exception ex)
......@@ -729,37 +726,42 @@ namespace URSoldering.Client
return 0;
}
}
private List<PositionResult> RunPositionOffset( )
private List<PositionResult> RunPositionOffset()
{
List<PositionResult> pointList = new List<PositionResult>();
List<PositionResult> pointList = new List<PositionResult>();
try
{
{
this.label1.Text = "视觉坐标偏移";
lblCodeResult.Visible = false;
RunAOI(0);
RunAOI(2);
Thread.Sleep(100);
string shaoxi = "坐标偏移" ;
int result1 = CKResult(shaoxi, 10);
if (!result1.Equals(1))
string nodeName = ConfigAppSettings.GetValue(Setting_Init.OffSetNodeName);
if (nodeName.Equals(""))
{
nodeName = "坐标偏移";
ConfigAppSettings.SaveValue(Setting_Init.OffSetNodeName, nodeName);
}
int result1 = CKResult(nodeName, 10);
if (result1.Equals(1))
{
pointList = GetPhotoResult(shaoxi, 100);
pointList = GetPhotoResult(nodeName, 100);
}
string resultList = "";
if (pointList.Count <= 0)
{
lblAOIResult.Text = shaoxi + "未识别到焊点";
lblAOIResult.Text = nodeName + "未识别到焊点";
}
else
{
lblAOIResult.Text = shaoxi + "识别结果：";
lblAOIResult.Text = nodeName + "识别结果：";
foreach (PositionResult result in pointList)
{
lblAOIResult.Text += " X：" + result.DataX + "，Y：" + result.DataY + "；";
}
}
resultList = lblAOIResult.Text;
LogUtil.info(resultList);
LogUtil.info(resultList);
lblAOIResult.Visible = true;
}
catch (Exception ex)
......@@ -793,39 +795,20 @@ namespace URSoldering.Client
LogUtil.info("获取【" + name + "】的数量：" + num);
for (int i = 0; i < num; i++)
{
double x = 0, y = 0;
if (name.Equals("少锡"))
double x = 0, y = 0;
objValue = new VariantWrapper(value);
if (axCKVisionCtrl1.GetValue(idTool, 102, i, ref objValue) == true)
{
objValue = new VariantWrapper(value);
if (axCKVisionCtrl1.GetValue(idTool, 102, i, ref objValue) == true)
{
result = objValue.ToString();
x = Convert.ToDouble(result);
}
objValue = new VariantWrapper(value);
if (axCKVisionCtrl1.GetValue(idTool, 103, i, ref objValue) == true)
{
result = objValue.ToString();
y = Convert.ToDouble(result);
}
aOIDataResults.Add(new PositionResult(x, y, 1, point));
result = objValue.ToString();
x = Convert.ToDouble(result);
}
else
objValue = new VariantWrapper(value);
if (axCKVisionCtrl1.GetValue(idTool, 103, i, ref objValue) == true)
{
objValue = new VariantWrapper(value);
if (axCKVisionCtrl1.GetValue(idTool, 103, i, ref objValue) == true)
{
result = objValue.ToString();
x = Convert.ToDouble(result);
}
objValue = new VariantWrapper(value);
if (axCKVisionCtrl1.GetValue(idTool, 104, i, ref objValue) == true)
{
result = objValue.ToString();
y = Convert.ToDouble(result);
}
aOIDataResults.Add(new PositionResult(x, y, 2, point));
result = objValue.ToString();
y = Convert.ToDouble(result);
}
aOIDataResults.Add(new PositionResult(x, y));
}
}
catch (Exception ex)
......
URSolderingClient/记录.txt
......@@ -37,16 +37,22 @@ AOI检测NG时，红灯亮，等到下次开始焊接时清理红灯。
20181022
需要修改内容：
坐标偏移功能
1.增加一个整体的mark点，保存机械臂坐标
2.每个电路板需要配置拍照点
3.流程修改：焊接之前，先去拍照点，拍照识别，取出坐标后进行整体坐标偏移，然后再焊接。
AOI程序修改：分支1是左边偏移功能。分支2是AOI检测功能。
图片上自动编程功能：
图片上要显示四个点：ABCD
需要配置AC点或者BD点作为固定点
点击图片，直接增加焊点，可以自动算出XY坐标
坐标偏移功能
1.增加一个整体的mark点，需要配置 机械臂坐标 和 图片对应坐标，偏移时根据此Mark点的图片坐标对机械臂坐标进行偏移。
2.每个程序需要配置一个拍照点 ， 焊接之前，先去拍照点，拍照识别Mark点，取出坐标后进行坐标偏移，然后再根据偏移后的坐标进行焊接。
3.AOI程序需要修改：分支2是坐标偏移功能。分支1是AOI检测功能。
自动编程功能：
1.程序编辑界面：每个程序都要配置AC点或者BD点作为固定点，也可以四个固定点都配置。
2.增加焊点时，点击图片对应位置新增焊点 ，会自动算出新焊点XY的坐标
20181126增加配置
更新程序后需要在URSolderingClient.exe.config增加配置：
<!--坐标偏移Mark点的图像默认坐标-->
<add key="MarkDefaultPosition" value="{&quot;DataX&quot;:0.0,&quot;DataY&quot;:0.0}" />
<!--坐标偏移坐标转换系数，图片的1像素对应实际多少毫米-->
<add key="PositionChangeValue" value="1" />
<!--坐标偏移AOI检测的分支名称-->
<add key="OffSetNodeName" value="坐标偏移"/>
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!