Skip to content

孙克 / RC30-AutoInOutStore

转到一个项目
切换导航栏
切换导航栏固定状态
Commit f2affbe0 由 几米阳光
选项

批量上料轴增加单独处理。增加版本号。

1 个父辈 f21554bd
内嵌 并排
正在显示 13 个修改的文件 包含 154 行增加 和 547 行删除
source/ACSingleStore/FrmBase.cs
...@@ -13,6 +13,33 @@ namespace OnlineStore.AutoInOutStore ...@@ -13,6 +13,33 @@ namespace OnlineStore.AutoInOutStore
{ {
public partial class FrmBase : Form public partial class FrmBase : Form
{ {
public static string GetVersion()
{
string str = "";
string version = "";
DateTime newData = DateTime.Parse("2000-01-01");
try
{
version = System.Reflection.Assembly.GetExecutingAssembly().GetName().Version.ToString();
string[] strArray = version.Split('.');
if (strArray.Length.Equals(4))
{
int days = Convert.ToInt32(strArray[2]);
int seconds = Convert.ToInt32(strArray[3]);
DateTime d1 = DateTime.Parse("2000-01-01");
newData = d1.AddDays(days);
newData = newData.AddSeconds(seconds * 2);
str = newData.ToString("yyyy-MM-dd HH:mm:ss");
}
}
catch (Exception ex)
{
str = version;
LogUtil.error("解析版本号【" + str + "】出错：" + ex.ToString());
}
LogUtil.info("版本号[" + version + "][" + str + "]");
return str;
}
public FrmBase() public FrmBase()
{ {
InitializeComponent(); InitializeComponent();
......
source/ACSingleStore/FrmStoreBox.cs
...@@ -147,7 +147,7 @@ namespace OnlineStore.AutoInOutStore ...@@ -147,7 +147,7 @@ namespace OnlineStore.AutoInOutStore
private bool LoadOk = false; private bool LoadOk = false;
private void FrmTest_Load(object sender, EventArgs e) private void FrmTest_Load(object sender, EventArgs e)
{ {
GetVersion();
LogUtil.logBox = this.richTextBox1; LogUtil.logBox = this.richTextBox1;
this.ShowInTaskbar = true; this.ShowInTaskbar = true;
this.Text = ConfigAppSettings.GetValue(Setting_Init.App_Title); this.Text = ConfigAppSettings.GetValue(Setting_Init.App_Title);
......
source/ACSingleStore/Properties/AssemblyInfo.cs
...@@ -31,6 +31,6 @@ using System.Runtime.InteropServices; ...@@ -31,6 +31,6 @@ using System.Runtime.InteropServices;
// //
// 可以指定所有这些值，也可以使用“生成号”和“修订号”的默认值， // 可以指定所有这些值，也可以使用“生成号”和“修订号”的默认值，
// 方法是按如下所示使用“*”: // 方法是按如下所示使用“*”:
// [assembly: AssemblyVersion("1.0.*")] [assembly: AssemblyVersion("1.0.*")]
[assembly: AssemblyVersion("1.0.0.0")] //[assembly: AssemblyVersion("1.0.0.0")]
[assembly: AssemblyFileVersion("1.0.0.0")] //[assembly: AssemblyFileVersion("1.0.0.0")]
source/ACSingleStore/记录.txt
...@@ -109,6 +109,12 @@ PRO,最后一盘料需要补充的高度,LastTrayAddHeight,10,,,,,,,,, ...@@ -109,6 +109,12 @@ PRO,最后一盘料需要补充的高度,LastTrayAddHeight,10,,,,,,,,,
20190111修改
1.波特率改为可配置模式。
2.松下伺服通信改为兼容模式。
3.批量上料轴上升过程中，新建一个线程用来验证是否需要停止。
......
source/DeviceLibrary/DeviceLibrary.csproj
...@@ -67,6 +67,7 @@ ...@@ -67,6 +67,7 @@
<Compile Include="PanasonicServo\ACCMDManager.cs" /> <Compile Include="PanasonicServo\ACCMDManager.cs" />
<Compile Include="PanasonicServo\ACServerManager.cs" /> <Compile Include="PanasonicServo\ACServerManager.cs" />
<Compile Include="PanasonicServo\ACServerManager_Partial.cs" /> <Compile Include="PanasonicServo\ACServerManager_Partial.cs" />
<Compile Include="PanasonicServo\BatchAxisController.cs" />
<Compile Include="ShuoKe\MeteringSignalBean.cs" /> <Compile Include="ShuoKe\MeteringSignalBean.cs" />
<Compile Include="ShuoKe\ShuoKeController.cs" /> <Compile Include="ShuoKe\ShuoKeController.cs" />
<Compile Include="store\LineMoveP.cs" /> <Compile Include="store\LineMoveP.cs" />
......
source/DeviceLibrary/PanasonicServo/BatchAxisController.cs 0 → 100644
using OnlineStore.Common;
using OnlineStore.LoadCSVLibrary;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
namespace OnlineStore.DeviceLibrary
{
/// <summary>
/// 批量上下料 轴，检测料盘检测信号处理
/// </summary>
public class BatchAxisController
{
private static bool IsStop = false;
private static System.Timers.Timer checkTimer = null;
public static bool StartCheck()
{
if (checkTimer == null)
{
checkTimer = new System.Timers.Timer();
checkTimer.AutoReset = true;
checkTimer.Interval += 50;
checkTimer.Elapsed += CheckTimer_Elapsed;
}
checkTimer.Start();
return true;
}
public static bool StopCheck()
{
if (!(checkTimer == null))
{
checkTimer.Stop();
}
return true;
}
private static bool IsInProcess = false;
private static void CheckTimer_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
{
if (IsInProcess) { return; }
IsInProcess = true;
bool result = false;
if (KND.IOValue(LoadCSVLibrary.IO_Type.TrayCheck_LoadMaterial).Equals(IO_VALUE.HIGH))
{
LogUtil.info("批量上料轴，检测到上料机构料盘信号，可以停止运动");
result = true;
}
else if (ACServerManager.GetLimitPositiveSingle(StoreManager.Config.Batch_Axis).Equals(1))
{
LogUtil.info("批量上料轴，检测到正极限信号，可以停止运动");
result = true;
}
if (result)
{
//AutoAxisIsMove = 0;
LogUtil.debug("批量上料轴， 停止运动");
ACServerManager.SuddenStop(StoreManager.Config.Batch_Axis.DeviceName, StoreManager.Config.Batch_Axis.GetAxisValue());
StopCheck();
}
IsInProcess = true;
}
}
}
source/DeviceLibrary/ShuoKe/ShuoKeControls.cs deleted 100644 → 0
using log4net;
using OnlineStore.Common;
using OnlineStore.LoadCSVLibrary;
using System;
using System.Collections.Generic;
using System.IO.Ports;
using System.Linq;
using System.Text;
using System.Threading;
namespace OnlineStore.DeviceLibrary
{
/// <summary>
/// 硕科控制模块代码
/// </summary>
public class ShuoKeControls
{
public static readonly ILog LOGGER = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
private static SerialBean bean = null;
public static bool isRun = false;
private static Dictionary<int, ShuoKeInfo> shuokeMap = new Dictionary<int, ShuoKeInfo>();
#region 串口操作
public static bool ResertInitPort(string comPortName, int baudRate, int tparity, int dataBits, StopBits stopBits)
{
if (isRun)
{
ClosePort();
}
return InitPort(comPortName, baudRate, tparity, dataBits, stopBits);
}
public static bool InitPort(string comPortName, int baudRate, int tparity, int dataBits, StopBits stopBits)
{
if (isRun)
{
return true;
}
try
{
Parity parity = (Parity)tparity;
bean = new SerialBean(comPortName, baudRate, parity, 8, stopBits);
bool result = bean.openPort();
if (!result)
{
return false;
}
bean.DataReceived += DataReceived;
isRun = true;
}
catch (Exception ex)
{
isRun = false;
LogUtil.error(LOGGER, "打开步进控制器串口失败：" + ex.ToString());
return false;
}
return true;
}
public static void ClosePort()
{
isRun = false;
bean.closePort();
LogUtil.info(LOGGER, "关闭步进控制器串口完成");
}
public static void SendData(byte[] data)
{
string strSend = "";
for (int i = 0; i < data.Length; i++)
{
strSend += string.Format("{0:X2} ", data[i]);
}
if (strSend.Equals(""))
{
return;
}
if (!isRun)
{
LogUtil.error(LOGGER, "电机发送数据【" + strSend + "】,当前串口未连接上，发送失败！");
return;
}
LogUtil.debug(LOGGER, "电机发送数据【" + strSend + "】");
bean.SendData(data, 0, data.Length);
}
private static void DataReceived(string portName, object sender, SerialDataReceivedEventArgs e, byte[] bits)
{
string strSend = "";
for (int i = 0; i < bits.Length; i++)
{
strSend += string.Format("{0:X2} ", bits[i]);
}
if (strSend.Equals(""))
{
return;
}
//校验
ushort pChecksum = 0;
AcSerialBean.CalculateCRC(bits, bits.Length - 2, out pChecksum);
string checkStr = Convert.ToString(pChecksum, 16);
byte[] checkByte = AcSerialBean.StringToByte(checkStr);
if (checkByte.Length == 1)
{
if (!bits[bits.Length - 2].Equals(checkByte[0]))
{
bean.clearInBuffer();
LogUtil.info(LOGGER, "收到数据：端口号 【" + portName + "】 数据【" + strSend + "】,校验错误");
return;
}
}
else
{
if (!bits[bits.Length - 1].Equals(checkByte[0]) || (!bits[bits.Length - 2].Equals(checkByte[1])))
{
bean.clearInBuffer();
LogUtil.info(LOGGER, "收到数据：端口号 【" + portName + "】 数据【" + strSend + "】,校验错误");
return;
}
}
LogUtil.debug(LOGGER, "收到数据：端口号 【" + portName + "】 数据【" + strSend + "】");
int slvAddr = (int)bits[0];
byte cmd = bits[1];
//查询状态
if (cmd.Equals(ShuoKeCMD.SearchMoveStatus))
{
//[数据1]：1表示运动中，0表示停止
//[数据2]：LL-左限位IO状态 1表示有效 0表示无效
//[数据3]：O-原点IO状态 1表示有效 0表示无效,,=1表示原点灭，=0表示当前原点亮
// [数据4]：RL-右限位IO状态 1表示有效 0表示无效
//[数据5]：EN-使能IO状态 1表示有效 0表示无效
int isInMove = bits[3];
int isLLimit = bits[4];
int isOrg = bits[5];
int isRLimit = bits[6];
int isEn = bits[7];
try
{
ShuoKeInfo info = new ShuoKeInfo(isInMove, slvAddr, isLLimit, isOrg, isRLimit, isEn);
if (shuokeMap.ContainsKey(slvAddr))
{
info.LastPosition = shuokeMap[slvAddr].LastPosition;
shuokeMap.Remove(slvAddr);
}
shuokeMap.Add(slvAddr, info);
}
catch (Exception ex)
{
LogUtil.error(LOGGER, "记录状态出错：" + ex.ToString());
}
LogUtil.debug(LOGGER, "收到驱动器【" + slvAddr + "】运动状态：运动【" + isInMove + "】左限位【" + isLLimit + "】右限位【" + isRLimit + "】原点【" + isOrg + "】使能【" + isEn + "】");
}
else if (cmd.Equals(ShuoKeCMD.GetAbsPosition))
{
byte[] positionData = new byte[4];
Array.Copy(bits, 3, positionData, 0, 4);
string a = SerialBean.byteToHexStr(positionData);
int absValue = Convert.ToInt32(a, 16);
LogUtil.info(LOGGER, "收到驱动器【" + slvAddr + "】绝对位置【" + absValue + "】");
if (shuokeMap.ContainsKey(slvAddr))
{
shuokeMap[slvAddr].LastPosition=absValue;
}
else
{
ShuoKeInfo info = new ShuoKeInfo(slvAddr, absValue);
shuokeMap.Add(slvAddr, info);
}
}
}
public static int GetLastPosition(int slvAddr)
{
if (shuokeMap.ContainsKey(slvAddr))
{
ShuoKeInfo info = shuokeMap[slvAddr];
return info.LastPosition;
}
return -1;
}
#endregion
#region 流水线逻辑判断
public static bool IsMoveEnd(int slvAddr,DateTime time, out ShuoKeInfo shuokeInfo)
{
shuokeInfo = null;
if (shuokeMap.ContainsKey(slvAddr))
{
ShuoKeInfo info = shuokeMap[slvAddr];
shuokeInfo = info;
if (info.IsInMove == 0 && info.UpdateTime > time)
{
return true;
}
}
return false;
}
public static bool IsHomeMoveEnd(int slvAddr, DateTime time,out ShuoKeInfo shuokeInfo)
{
shuokeInfo = null;
if (shuokeMap.ContainsKey(slvAddr))
{
ShuoKeInfo info = shuokeMap[slvAddr];
shuokeInfo = info;
if (info.IsInMove == 0 && info.UpdateTime > time&&info.Org==0)
{
return true;
}
}
return false;
}
#endregion
#region 驱动器操作方法
public static void GetStatus(int slvAddr)
{
byte[] sendData = WriteData(slvAddr, ShuoKeCMD.SearchMoveStatus, 0x00, 0);
}
public static void DStoop(int slvAddr)
{
byte[] sendData = WriteData(slvAddr, ShuoKeCMD.DStopMove, 0x00, 0);
}
public static void SuddownStop(int slvAddr)
{
byte[] sendData = WriteData(slvAddr, ShuoKeCMD.SuddownStopMove, 0x00, 0);
}
public static void GetABSPosition(int slvAddr)
{
byte[] sendData = WriteData(slvAddr, ShuoKeCMD.GetAbsPosition, 0x00, 0);
}
/// <summary>
///
/// </summary>
/// <param name="slvAddr"></param>
/// <param name="homeType">0=反方向，1=正方向</param>
public static void HomeMove(int slvAddr, byte homeType)
{
string fangx = homeType.Equals(0) ? "反方向" : "正方向";
LogUtil.info("压紧轴原点返回：" + fangx);
byte[] sendData = WriteData(slvAddr, ShuoKeCMD.HomeMove, 0x01, homeType);
Thread.Sleep(100);
}
public static void SetConfigSpeed(AUTO_SA_Config Config)
{
ShuoKeControls.SetSpeed(Config.CompressAxis_Slv, ShuoKeCMD.SetAddSpeed, Config.CompressAxis_AddSpeed);
Thread.Sleep(60);
ShuoKeControls.SetSpeed(Config.CompressAxis_Slv, ShuoKeCMD.SetDelSpeed, Config.CompressAxis_DelSpeed);
Thread.Sleep(60);
ShuoKeControls.SetSpeed(Config.CompressAxis_Slv, ShuoKeCMD.SetEndSpeed, Config.CompressAxis_EndSpeed);
Thread.Sleep(60);
ShuoKeControls.SetSpeed(Config.CompressAxis_Slv, ShuoKeCMD.SetHomeSpeed, Config.CompressAxis_HomeSpeed);
Thread.Sleep(60);
ShuoKeControls.SetSpeed(Config.CompressAxis_Slv, ShuoKeCMD.SetMaxSpeed, Config.CompressAxis_MaxSpeed);
Thread.Sleep(60);
ShuoKeControls.SetSpeed(Config.CompressAxis_Slv, ShuoKeCMD.SetStartSpeed, Config.CompressAxis_StartSpeed);
}
public static void VolMove(int slvAddr, int speed)
{
byte[] sendData = WriteData(slvAddr, ShuoKeCMD.VolMove, 0x04, speed);
}
public static void AbsMove(int slvAddr, int TargetPosition)
{
// 47、设置绝对位置并开始运动：不支持广播（开环的32位脉冲统计长度）
//正负数表示绝对位置，如果已经到位置，则不做运动。(M4505S特有命令)
//发送： 应答：
//[设备地址] 0x01 [设备地址] 0x01
//[命令] 0x50 [命令] 0x50
//[数据长度] 4 [数据长度] 0
//[数据] xxxxxxxx [数据] 无
//[CRC校验1] 0xnn [CRC校验1] 0xnn
//[CRC校验2] 0xnn [CRC校验2] 0xnn
//数据：4BYTE，（支持32位有符号脉冲位置）
byte[] sendData = WriteData(slvAddr, ShuoKeCMD.AbsMove, 0x04, TargetPosition);
}
public static void RelativeMove(int slvAddr, int position)
{
//1是正方向
byte fangxiang = 0x01;
if (position < 0)
{
fangxiang = 0x00;
position = Math.Abs(position);
}
byte dataLength = 0x04;
byte[] sendData = new byte[5 + dataLength];
sendData[0] = (byte)slvAddr;
sendData[1] = ShuoKeCMD.RelativeMove;
sendData[2] = dataLength;
sendData[3] = 0x00;
sendData[4] = 0x00;
sendData[5] = 0x00;
sendData[6] = 0x00;
string speed = Convert.ToString(position, 16);
byte[] speedByte = AcSerialBean.StringToByte(speed);
for (int i = 0; i < speedByte.Length; i++)
{
if (i >= 4)
{
break;
}
sendData[6 - (speedByte.Length - 1 - i)] = speedByte[i];
}
sendData[3] = fangxiang;
sendData = buildCheckData(sendData, 3 + dataLength);
SendData(sendData);
}
public static void PositionClear(int slvAddr, byte setCMD)
{
byte[] sendData = WriteData(slvAddr, setCMD, 0x00, 0);
}
/// <summary>
/// 设置电机的速度
/// </summary>
/// <param name="slvAddr">电机地址</param>
/// <param name="setCMD">设置速度的命令号</param>
/// <param name="speedValue">速度值</param>
public static void SetSpeed(int slvAddr, byte setCMD, int speedValue)
{
byte[] sendData = WriteData(slvAddr, setCMD, 0x04, speedValue);
}
private static byte[] WriteData(int slvAddr, byte cmd, byte dataLength, int dataValue)
{
byte[] sendData = new byte[5 + dataLength];
sendData[0] = (byte)slvAddr;
sendData[1] = cmd;
sendData[2] = dataLength;
if (dataLength.Equals(0x00))
{
}
else if (dataLength.Equals(0x01))
{
sendData[3] = (byte)dataValue;
}
else if (dataLength.Equals(0x04))
{
sendData[3] = 0x00;
sendData[4] = 0x00;
sendData[5] = 0x00;
sendData[6] = 0x00;
string speed = Convert.ToString(dataValue, 16);
byte[] speedByte = AcSerialBean.StringToByte(speed);
for (int i = 0; i < speedByte.Length; i++)
{
if (i >= 4)
{
break;
}
sendData[6 - (speedByte.Length - 1 - i)] = speedByte[i];
}
}
sendData = buildCheckData(sendData, 3 + dataLength);
SendData(sendData);
return sendData;
}
private static byte[] buildCheckData(byte[] sendData, int length)
{
ushort pChecksum = 0;
AcSerialBean.CalculateCRC(sendData, length, out pChecksum);
string checkStr = Convert.ToString(pChecksum, 16);
byte[] checkByte = AcSerialBean.StringToByte(checkStr);
if (checkByte.Length == 1)
{
sendData[length] = checkByte[0];
sendData[length + 1] = 0x00;
}
else
{
sendData[length + 1] = checkByte[0];
sendData[length] = checkByte[1];
}
return sendData;
}
#endregion
}
public class ShuoKeCMD
{
/// <summary>
/// 设置运动初速度://SndHex:01 25 04 00 00 00 64 FC DE
/// </summary>
public static byte SetStartSpeed = 0x25;
/// <summary>
/// 设置运动最大速度://SndHex:01 27 04 00 00 27 10 E6 EB
/// </summary>
public static byte SetMaxSpeed = 0x27;
/// <summary>
/// 设置运动末速度://SndHex:01 29 04 00 00 03 E8 FD 47
/// </summary>
public static byte SetEndSpeed = 0x29;
/// <summary>
/// 设置运动加速度://SndHex:01 2B 04 00 00 13 88 F1 4D
/// </summary>
public static byte SetAddSpeed = 0x2B;
/// <summary>
/// 设置运动减速度://SndHex:01 2D 04 00 00 03 E8 FC C3
/// </summary>
public static byte SetDelSpeed = 0x2D;
/// <summary>
/// 设置归零运动速度://SndHex:01 2F 04 00 00 27 10 E7 A3
/// </summary>
public static byte SetHomeSpeed = 0x2F;
/// <summary>
/// //查找原点命令:
//SndHex:01 3E 01 00 61 84
/// </summary>
public static byte HomeMove = 0x3E;
/// <summary>
/// 绝对位置运动//SndHex:01 50 04 FF FF D8 F0 AC 30
/// </summary>
public static byte AbsMove = 0x50;
/// <summary>
/// 急停命令://SndHex:01 3C 00 31 00
/// </summary>
public static byte SuddownStopMove = 0x3C;
/// <summary>
/// 减速停止命令://SndHex:01 3D 00 30 90
/// </summary>
public static byte DStopMove = 0x3D;
/// <summary>
/// 绝对位置清零: //SndHex:01 38 00 33 C0
/// </summary>
public static byte AbsPositionClear = 0x38;
/// <summary>
/// 相对位置清零: //SndHex:01 3A 00 32 A0
/// </summary>
public static byte RelPositionClear = 0x3A;
/// <summary>
/// 查询运动状态://SndHex:01 3B 00 33 30
/// </summary>
public static byte SearchMoveStatus = 0x3B;
/// <summary>
//查询设备地址://SndHex:00 21 00 69 90
/// </summary>
public static byte SearchSlvAddr = 0x21;
/// <summary>
/// 设置32位运动速度，并恒速运动:SndHex:01 33 04 00 00 27 10 E5 FF
/// </summary>
public static byte VolMove = 0x33;
/// <summary>
/// 查询绝对位置
/// </summary>
public static byte GetAbsPosition = 0x37;
/// <summary>
/// 相对位置运动
/// </summary>
public static byte RelativeMove = 0x32;
}
public class ShuoKeInfo
{
public ShuoKeInfo(int slv,int position)
{
this.IsInMove = 0 ;
this.SlvAddr = slv;
this.LLimit = 0;
this.RLimit = 0;
this.Org = 0;
this.En = 0;
UpdateTime = DateTime.Now;
LastPosition = position;
}
public ShuoKeInfo(int ismove, int slv, int ll, int org, int rl, int en)
{
this.IsInMove = ismove;
this.SlvAddr=slv;
this.LLimit=ll;
this.RLimit=rl;
this.Org=org;
this.En=en;
UpdateTime=DateTime.Now;
LastPosition = 0;
}
public int LastPosition { get; set; }
/// <summary>
/// 驱动器地址
/// </summary>
public int SlvAddr { get; set; }
/// <summary>
/// 是否在运动中
/// </summary>
public int IsInMove { get; set; }
/// <summary>
/// 左极限
/// </summary>
public int LLimit { get; set; }
/// <summary>
/// 右极限
/// </summary>
public int RLimit { get; set; }
/// <summary>
/// 原点信号是否有效
/// </summary>
public int Org { get; set; }
/// <summary>
/// 使能是否有效
/// </summary>
public int En { get; set; }
public DateTime UpdateTime { get; set; }
public string ToShowStr()
{
return "运动[" + IsInMove + "]左限位[" + LLimit + "]右限位[" + RLimit + "]原点[" + Org + "]使能[" + En + "]["+UpdateTime.ToShortTimeString()+"]";
}
}
}
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean.cs
...@@ -1216,6 +1216,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -1216,6 +1216,7 @@ namespace OnlineStore.DeviceLibrary
} }
public override void StopMove(bool IsCloseAxis) public override void StopMove(bool IsCloseAxis)
{ {
BatchAxisController.StopCheck();
AxisSuddenStop(); AxisSuddenStop();
if (IsHasCompress_Axis) if (IsHasCompress_Axis)
{ {
...@@ -1237,11 +1238,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -1237,11 +1238,10 @@ namespace OnlineStore.DeviceLibrary
LogUtil.info(LOGGER, StoreName + "StopMove"); LogUtil.info(LOGGER, StoreName + "StopMove");
KND.IOMove(IO_Type.Door_Down, IO_VALUE.LOW); KND.IOMove(IO_Type.Door_Down, IO_VALUE.LOW);
KND.IOMove(IO_Type.Door_Up, IO_VALUE.LOW); KND.IOMove(IO_Type.Door_Up, IO_VALUE.LOW);
AutomaticBaiting.StopMove(); AutomaticBaiting.StopMove();
MeteringSignal.StopCheck();
MeteringSignal.StopCheck(); isInPro = false;
isInPro = false;
} }
......
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean_Partial.cs
...@@ -139,11 +139,6 @@ namespace OnlineStore.DeviceLibrary ...@@ -139,11 +139,6 @@ namespace OnlineStore.DeviceLibrary
{ {
wait.IsEnd = ACAxisMoveIsEnd(wait.AxisInfo, wait.TargetPosition, wait.TargetSpeed, out msg); wait.IsEnd = ACAxisMoveIsEnd(wait.AxisInfo, wait.TargetPosition, wait.TargetSpeed, out msg);
} }
if (!wait.IsEnd && (Config.Batch_Axis.IsSameAxis(wait.AxisInfo.DeviceName,wait.AxisInfo.GetAxisValue())) && wait.TargetPosition.Equals(Config.BatchAxis_P1))
{
wait.IsEnd = AutomaticBaiting.BatchAxisIsEnd(wait);
}
if (!msg.Equals("")) if (!msg.Equals(""))
{ {
isOk = false; isOk = false;
...@@ -183,6 +178,29 @@ namespace OnlineStore.DeviceLibrary ...@@ -183,6 +178,29 @@ namespace OnlineStore.DeviceLibrary
{ {
wait.IsEnd = AutomaticBaiting.IsGetTrayGo; wait.IsEnd = AutomaticBaiting.IsGetTrayGo;
} }
else if (wait.WaitType == (int)Wait_Type.BatchAxisMove_10)
{
//if ((Config.Batch_Axis.IsSameAxis(wait.AxisInfo.DeviceName, wait.AxisInfo.GetAxisValue())) && wait.TargetPosition.Equals(Config.BatchAxis_P1))
//{
if (!wait.IsEnd)
{
wait.IsEnd = AutomaticBaiting.BatchAxisIsEnd(wait);
}
if (!wait.IsEnd)
{
bool MoveEnd = ACServerManager.GetBusyStatus(wait.AxisInfo.DeviceName, wait.AxisInfo.GetAxisValue()).Equals(0);
int outCount = ACServerManager.GetActualtPosition(wait.AxisInfo.DeviceName, wait.AxisInfo.GetAxisValue());
int errorCount = Math.Abs(outCount - wait.TargetPosition);
if (MoveEnd && errorCount < wait.AxisInfo.CanErrorCountMax)
{
wait.IsEnd = true;
}
}
if (wait.IsEnd)
{
BatchAxisController.StopCheck();
}
}
else if (wait.WaitType == (int)Wait_Type.ShuoKe_5) else if (wait.WaitType == (int)Wait_Type.ShuoKe_5)
{ {
string msg = ""; string msg = "";
...@@ -211,9 +229,9 @@ namespace OnlineStore.DeviceLibrary ...@@ -211,9 +229,9 @@ namespace OnlineStore.DeviceLibrary
StoreMove.EndStepWait(); StoreMove.EndStepWait();
} }
else if (span.TotalSeconds > StoreMove.TimeOutSeconds) else if (span.TotalSeconds > StoreMove.TimeOutSeconds)
{ {
WarnMsg = "[" + StoreMove.MoveStep + "]等待[" + NotOkMsg + "]超时[" + Math.Round(span.TotalSeconds, 1) + "]秒"; WarnMsg = "[" + StoreMove.MoveStep + "]等待[" + NotOkMsg + "]超时[" + Math.Round(span.TotalSeconds, 1) + "]秒";
LogUtil.error(WarnMsg, 15); LogUtil.error(WarnMsg, 15);
Alarm(StoreAlarmType.IoSingleTimeOut, "", WarnMsg, StoreMove.MoveType); Alarm(StoreAlarmType.IoSingleTimeOut, "", WarnMsg, StoreMove.MoveType);
} }
} }
...@@ -803,7 +821,11 @@ namespace OnlineStore.DeviceLibrary ...@@ -803,7 +821,11 @@ namespace OnlineStore.DeviceLibrary
if (KND.IOValue(IO_Type.TrayCheck_LoadMaterial).Equals(IO_VALUE.LOW)) if (KND.IOValue(IO_Type.TrayCheck_LoadMaterial).Equals(IO_VALUE.LOW))
{ {
StoreMove.TimeOutSeconds = 120; StoreMove.TimeOutSeconds = 120;
ACAxisMove(Config.Batch_Axis, Config.BatchAxis_P1, Config.BatchAxis_P1_Speed); //ACAxisMove(Config.Batch_Axis, Config.BatchAxis_P1, Config.BatchAxis_P1_Speed);
StoreMove.WaitList.Add(WaitResultInfo.WaitBatchAxisStop(Config.Batch_Axis, Config.BatchAxis_P1));
BatchAxisController.StartCheck();
Config.Batch_Axis.TargetPosition = Config.BatchAxis_P1;
ACServerManager.AbsMove(Config.Batch_Axis.DeviceName, Config.Batch_Axis.GetAxisValue(), Config.BatchAxis_P1, Config.BatchAxis_P1_Speed);
OutStoreLog("出库：SO_02 批量上下料轴到P1点【"+Config.BatchAxis_P1+"】 "); OutStoreLog("出库：SO_02 批量上下料轴到P1点【"+Config.BatchAxis_P1+"】 ");
} }
} }
......
source/DeviceLibrary/acSingleStore/AutomaticBaiting.cs
...@@ -113,7 +113,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -113,7 +113,8 @@ namespace OnlineStore.DeviceLibrary
ClearOutStoreInfo(); ClearOutStoreInfo();
} }
public static void StopMove() public static void StopMove()
{ {
BatchAxisController.StopCheck();
StoreMove.EndMove(); StoreMove.EndMove();
ClearInStoreInfo(); ClearInStoreInfo();
KND.IOMove(IO_Type.SuckingDisc_Work, IO_VALUE.LOW); KND.IOMove(IO_Type.SuckingDisc_Work, IO_VALUE.LOW);
......
source/DeviceLibrary/acSingleStore/AutomaticBaiting_Partial.cs
...@@ -19,8 +19,9 @@ namespace OnlineStore.DeviceLibrary ...@@ -19,8 +19,9 @@ namespace OnlineStore.DeviceLibrary
//AutoAxisIsMove = 1; //AutoAxisIsMove = 1;
StartMovePosition = ACServerManager.GetActualtPosition(moveAxis.DeviceName, moveAxis.GetAxisValue()); StartMovePosition = ACServerManager.GetActualtPosition(moveAxis.DeviceName, moveAxis.GetAxisValue());
EndMovePosition = StartMovePosition; EndMovePosition = StartMovePosition;
LogUtil.info("当前坐标："+StartMovePosition+",批量上料轴开始匀速"+targetSpeed+"上升"); LogUtil.info("当前坐标："+StartMovePosition+",批量上料轴开始匀速"+targetSpeed+"上升");
StoreMove.WaitList.Add(WaitResultInfo.WaitBatchAxisStop(moveAxis)); StoreMove.WaitList.Add(WaitResultInfo.WaitBatchAxisStop(moveAxis,0));
BatchAxisController.StartCheck();
ACServerManager.SpeedMove(moveAxis.DeviceName, moveAxis.GetAxisValue(), targetSpeed); ACServerManager.SpeedMove(moveAxis.DeviceName, moveAxis.GetAxisValue(), targetSpeed);
} }
...@@ -133,6 +134,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -133,6 +134,10 @@ namespace OnlineStore.DeviceLibrary
else if (wait.WaitType == (int)Wait_Type.BatchAxisMove_10) else if (wait.WaitType == (int)Wait_Type.BatchAxisMove_10)
{ {
wait.IsEnd = BatchAxisIsEnd(wait); wait.IsEnd = BatchAxisIsEnd(wait);
if (wait.IsEnd)
{
BatchAxisController.StopCheck();
}
} }
else if (wait.WaitType == (int)Wait_Type.ScanCode_11) else if (wait.WaitType == (int)Wait_Type.ScanCode_11)
{ {
...@@ -235,17 +240,13 @@ namespace OnlineStore.DeviceLibrary ...@@ -235,17 +240,13 @@ namespace OnlineStore.DeviceLibrary
bool result = false; bool result = false;
if (KND.IOValue(IO_Type.TrayCheck_LoadMaterial).Equals(IO_VALUE.HIGH)) if (KND.IOValue(IO_Type.TrayCheck_LoadMaterial).Equals(IO_VALUE.HIGH))
{ {
LogUtil.info(wait.ToStr()+"检测到上料机构料盘信号，可以停止运动"); LogUtil.info(wait.ToStr() + "检测到上料机构料盘信号，可以停止运动");
result = true; result = true;
} }
else else if (ACServerManager.GetLimitPositiveSingle(wait.AxisInfo).Equals(1))
{ {
int limitP=ACServerManager.GetLimitPositiveSingle(wait.AxisInfo); LogUtil.info(wait.ToStr() + "检测到正极限信号，可以停止运动");
if (limitP.Equals(1)) result = true;
{
LogUtil.info(wait.ToStr() + "检测到正极限信号，可以停止运动");
result = true;
}
} }
if (result) if (result)
{ {
......
source/DeviceLibrary/store/model/StoreMoveInfo.cs
...@@ -277,9 +277,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -277,9 +277,10 @@ namespace OnlineStore.DeviceLibrary
/// 10=等待批量上下料轴运动 停止 /// 10=等待批量上下料轴运动 停止
/// </summary> /// </summary>
/// <returns></returns> /// <returns></returns>
public static WaitResultInfo WaitBatchAxisStop(ConfigMoveAxis moveAxis) public static WaitResultInfo WaitBatchAxisStop(ConfigMoveAxis moveAxis,int targetPosition)
{ {
WaitResultInfo wait = new WaitResultInfo(); WaitResultInfo wait = new WaitResultInfo();
wait.TargetPosition = targetPosition;
wait.CanWhileMoveCount = 0; wait.CanWhileMoveCount = 0;
wait.AxisInfo = moveAxis; wait.AxisInfo = moveAxis;
wait.WaitType = (int)Wait_Type.BatchAxisMove_10; wait.WaitType = (int)Wait_Type.BatchAxisMove_10;
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!