Skip to content

孙克 / RC30-AutoInOutStore

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 3de72ecd 由 renym1968
选项

自动进料/出料处理Demo 版

1 个父辈 898b84e1
内嵌 并排
正在显示 7 个修改的文件 包含 1026 行增加 和 170 行删除
source/ACSingleStore/FrmStoreBox.Designer.cs
......@@ -204,14 +204,25 @@
this.label25 = new System.Windows.Forms.Label();
this.comboBoxPortName = new System.Windows.Forms.ComboBox();
this.groupBoxChuck = new System.Windows.Forms.GroupBox();
this.button6 = new System.Windows.Forms.Button();
this.button5 = new System.Windows.Forms.Button();
this.btnChargingP0 = new System.Windows.Forms.Button();
this.btnChargingUp = new System.Windows.Forms.Button();
this.txtStart = new System.Windows.Forms.TextBox();
this.txtEnd = new System.Windows.Forms.TextBox();
this.txtHeight = new System.Windows.Forms.TextBox();
this.btnChargingOutOpenDoor = new System.Windows.Forms.Button();
this.label20 = new System.Windows.Forms.Label();
this.label22 = new System.Windows.Forms.Label();
this.label23 = new System.Windows.Forms.Label();
this.txtPot = new System.Windows.Forms.TextBox();
this.btnReadPot = new System.Windows.Forms.Button();
this.label24 = new System.Windows.Forms.Label();
this.txtNot = new System.Windows.Forms.TextBox();
this.btnReadNot = new System.Windows.Forms.Button();
this.btnChargingOut = new System.Windows.Forms.Button();
this.btnChargingIn = new System.Windows.Forms.Button();
this.btnChargingDown = new System.Windows.Forms.Button();
this.txtHeight = new System.Windows.Forms.TextBox();
this.txtEnd = new System.Windows.Forms.TextBox();
this.txtStart = new System.Windows.Forms.TextBox();
this.btnChargingUp = new System.Windows.Forms.Button();
this.btnChargingP0 = new System.Windows.Forms.Button();
this.btnCloseLock = new System.Windows.Forms.Button();
this.btnOpenLock = new System.Windows.Forms.Button();
this.groupBox5.SuspendLayout();
this.groupBox1.SuspendLayout();
this.groupBox2.SuspendLayout();
......@@ -770,7 +781,7 @@
this.richTextBox1.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
this.richTextBox1.Location = new System.Drawing.Point(7, 525);
this.richTextBox1.Name = "richTextBox1";
this.richTextBox1.Size = new System.Drawing.Size(496, 429);
this.richTextBox1.Size = new System.Drawing.Size(496, 450);
this.richTextBox1.TabIndex = 256;
this.richTextBox1.Text = "";
//
......@@ -1756,55 +1767,55 @@
// 启动ToolStripMenuItem
//
this.启动ToolStripMenuItem.Name = "启动ToolStripMenuItem";
this.启动ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.启动ToolStripMenuItem.Size = new System.Drawing.Size(144, 26);
this.启动ToolStripMenuItem.Text = "启动";
this.启动ToolStripMenuItem.Click += new System.EventHandler(this.启动ToolStripMenuItem_Click);
//
// toolStripSeparator1
//
this.toolStripSeparator1.Name = "toolStripSeparator1";
this.toolStripSeparator1.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator1.Size = new System.Drawing.Size(141, 6);
//
// 停止ToolStripMenuItem
//
this.停止ToolStripMenuItem.Name = "停止ToolStripMenuItem";
this.停止ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.停止ToolStripMenuItem.Size = new System.Drawing.Size(144, 26);
this.停止ToolStripMenuItem.Text = "停止";
this.停止ToolStripMenuItem.Click += new System.EventHandler(this.停止ToolStripMenuItem_Click);
//
// toolStripSeparator2
//
this.toolStripSeparator2.Name = "toolStripSeparator2";
this.toolStripSeparator2.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator2.Size = new System.Drawing.Size(141, 6);
//
// 复位ToolStripMenuItem
//
this.复位ToolStripMenuItem.Name = "复位ToolStripMenuItem";
this.复位ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.复位ToolStripMenuItem.Size = new System.Drawing.Size(144, 26);
this.复位ToolStripMenuItem.Text = "复位";
this.复位ToolStripMenuItem.Click += new System.EventHandler(this.复位ToolStripMenuItem_Click);
//
// toolStripSeparator3
//
this.toolStripSeparator3.Name = "toolStripSeparator3";
this.toolStripSeparator3.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator3.Size = new System.Drawing.Size(141, 6);
//
// 回待机点ToolStripMenuItem
//
this.回待机点ToolStripMenuItem.Name = "回待机点ToolStripMenuItem";
this.回待机点ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.回待机点ToolStripMenuItem.Size = new System.Drawing.Size(144, 26);
this.回待机点ToolStripMenuItem.Text = "回待机点";
this.回待机点ToolStripMenuItem.Click += new System.EventHandler(this.回待机点ToolStripMenuItem_Click);
//
// toolStripSeparator4
//
this.toolStripSeparator4.Name = "toolStripSeparator4";
this.toolStripSeparator4.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator4.Size = new System.Drawing.Size(141, 6);
//
// 退出ToolStripMenuItem
//
this.退出ToolStripMenuItem.Name = "退出ToolStripMenuItem";
this.退出ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.退出ToolStripMenuItem.Size = new System.Drawing.Size(144, 26);
this.退出ToolStripMenuItem.Text = "退出系统";
this.退出ToolStripMenuItem.Click += new System.EventHandler(this.退出ToolStripMenuItem_Click);
//
......@@ -1912,38 +1923,38 @@
// 轴卡点动ToolStripMenuItem
//
this.轴卡点动ToolStripMenuItem.Name = "轴卡点动ToolStripMenuItem";
this.轴卡点动ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.轴卡点动ToolStripMenuItem.Size = new System.Drawing.Size(160, 26);
this.轴卡点动ToolStripMenuItem.Text = "轴卡点动";
this.轴卡点动ToolStripMenuItem.Click += new System.EventHandler(this.轴卡点动ToolStripMenuItem_Click);
//
// toolStripSeparator9
//
this.toolStripSeparator9.Name = "toolStripSeparator9";
this.toolStripSeparator9.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator9.Size = new System.Drawing.Size(157, 6);
//
// 扫码测试ToolStripMenuItem
//
this.扫码测试ToolStripMenuItem.Name = "扫码测试ToolStripMenuItem";
this.扫码测试ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.扫码测试ToolStripMenuItem.Size = new System.Drawing.Size(160, 26);
this.扫码测试ToolStripMenuItem.Text = "扫码测试";
this.扫码测试ToolStripMenuItem.Click += new System.EventHandler(this.扫码测试ToolStripMenuItem_Click);
//
// toolStripSeparator10
//
this.toolStripSeparator10.Name = "toolStripSeparator10";
this.toolStripSeparator10.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator10.Size = new System.Drawing.Size(157, 6);
//
// 摄像机调试ToolStripMenuItem
//
this.摄像机调试ToolStripMenuItem.Name = "摄像机调试ToolStripMenuItem";
this.摄像机调试ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.摄像机调试ToolStripMenuItem.Size = new System.Drawing.Size(160, 26);
this.摄像机调试ToolStripMenuItem.Text = "二维码学习";
this.摄像机调试ToolStripMenuItem.Click += new System.EventHandler(this.摄像机调试ToolStripMenuItem_Click);
//
// toolStripSeparator11
//
this.toolStripSeparator11.Name = "toolStripSeparator11";
this.toolStripSeparator11.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator11.Size = new System.Drawing.Size(157, 6);
//
// 配置信息ToolStripMenuItem
//
......@@ -1957,7 +1968,7 @@
// 轴运动配置ToolStripMenuItem
//
this.轴运动配置ToolStripMenuItem.Name = "轴运动配置ToolStripMenuItem";
this.轴运动配置ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.轴运动配置ToolStripMenuItem.Size = new System.Drawing.Size(160, 26);
this.轴运动配置ToolStripMenuItem.Text = "轴运动配置";
this.轴运动配置ToolStripMenuItem.Click += new System.EventHandler(this.轴运动配置ToolStripMenuItem_Click);
//
......@@ -1974,19 +1985,19 @@
// 开启DEBUGToolStripMenuItem
//
this.开启DEBUGToolStripMenuItem.Name = "开启DEBUGToolStripMenuItem";
this.开启DEBUGToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.开启DEBUGToolStripMenuItem.Size = new System.Drawing.Size(167, 26);
this.开启DEBUGToolStripMenuItem.Text = "开启DEBUG";
this.开启DEBUGToolStripMenuItem.Click += new System.EventHandler(this.开启DEBUGToolStripMenuItem_Click);
//
// toolStripSeparator12
//
this.toolStripSeparator12.Name = "toolStripSeparator12";
this.toolStripSeparator12.Size = new System.Drawing.Size(177, 6);
this.toolStripSeparator12.Size = new System.Drawing.Size(164, 6);
//
// 清理日志ToolStripMenuItem
//
this.清理日志ToolStripMenuItem.Name = "清理日志ToolStripMenuItem";
this.清理日志ToolStripMenuItem.Size = new System.Drawing.Size(180, 26);
this.清理日志ToolStripMenuItem.Size = new System.Drawing.Size(167, 26);
this.清理日志ToolStripMenuItem.Text = "清理日志";
this.清理日志ToolStripMenuItem.Click += new System.EventHandler(this.清理日志ToolStripMenuItem_Click);
//
......@@ -2282,47 +2293,166 @@
//
this.groupBoxChuck.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Left)
| System.Windows.Forms.AnchorStyles.Right)));
this.groupBoxChuck.Controls.Add(this.btnChargingOutOpenDoor);
this.groupBoxChuck.Controls.Add(this.label20);
this.groupBoxChuck.Controls.Add(this.label22);
this.groupBoxChuck.Controls.Add(this.label23);
this.groupBoxChuck.Controls.Add(this.txtPot);
this.groupBoxChuck.Controls.Add(this.btnReadPot);
this.groupBoxChuck.Controls.Add(this.label24);
this.groupBoxChuck.Controls.Add(this.txtNot);
this.groupBoxChuck.Controls.Add(this.btnReadNot);
this.groupBoxChuck.Controls.Add(this.btnChargingOut);
this.groupBoxChuck.Controls.Add(this.btnChargingIn);
this.groupBoxChuck.Controls.Add(this.btnChargingDown);
this.groupBoxChuck.Controls.Add(this.txtHeight);
this.groupBoxChuck.Controls.Add(this.txtEnd);
this.groupBoxChuck.Controls.Add(this.txtStart);
this.groupBoxChuck.Controls.Add(this.btnChargingUp);
this.groupBoxChuck.Controls.Add(this.btnChargingP0);
this.groupBoxChuck.Controls.Add(this.button6);
this.groupBoxChuck.Controls.Add(this.button5);
this.groupBoxChuck.Controls.Add(this.btnCloseLock);
this.groupBoxChuck.Controls.Add(this.btnOpenLock);
this.groupBoxChuck.Location = new System.Drawing.Point(510, 737);
this.groupBoxChuck.Name = "groupBoxChuck";
this.groupBoxChuck.Size = new System.Drawing.Size(512, 149);
this.groupBoxChuck.Size = new System.Drawing.Size(512, 221);
this.groupBoxChuck.TabIndex = 273;
this.groupBoxChuck.TabStop = false;
this.groupBoxChuck.Text = "自动上料/吸盘操作";
//
// button6
// btnChargingOutOpenDoor
//
this.btnChargingOutOpenDoor.Location = new System.Drawing.Point(249, 103);
this.btnChargingOutOpenDoor.Name = "btnChargingOutOpenDoor";
this.btnChargingOutOpenDoor.Size = new System.Drawing.Size(105, 33);
this.btnChargingOutOpenDoor.TabIndex = 303;
this.btnChargingOutOpenDoor.Text = "开门出料";
this.btnChargingOutOpenDoor.UseVisualStyleBackColor = true;
this.btnChargingOutOpenDoor.Click += new System.EventHandler(this.btnChargingOutOpenDoor_Click);
//
// label20
//
this.label20.AutoSize = true;
this.label20.Location = new System.Drawing.Point(123, 191);
this.label20.Name = "label20";
this.label20.Size = new System.Drawing.Size(100, 20);
this.label20.TabIndex = 302;
this.label20.Text = "1=On，0=Off";
//
// label22
//
this.label22.AutoSize = true;
this.label22.Location = new System.Drawing.Point(123, 158);
this.label22.Name = "label22";
this.label22.Size = new System.Drawing.Size(100, 20);
this.label22.TabIndex = 301;
this.label22.Text = "1=On，0=Off";
//
// label23
//
this.label23.AutoSize = true;
this.label23.Location = new System.Drawing.Point(13, 189);
this.label23.Name = "label23";
this.label23.Size = new System.Drawing.Size(79, 20);
this.label23.TabIndex = 300;
this.label23.Text = "正向状态：";
//
// txtPot
//
this.txtPot.Enabled = false;
this.txtPot.Location = new System.Drawing.Point(92, 186);
this.txtPot.Name = "txtPot";
this.txtPot.Size = new System.Drawing.Size(25, 26);
this.txtPot.TabIndex = 299;
//
// btnReadPot
//
this.btnReadPot.Location = new System.Drawing.Point(249, 180);
this.btnReadPot.Name = "btnReadPot";
this.btnReadPot.Size = new System.Drawing.Size(105, 33);
this.btnReadPot.TabIndex = 298;
this.btnReadPot.Text = "读正方向禁止";
this.btnReadPot.UseVisualStyleBackColor = true;
this.btnReadPot.Click += new System.EventHandler(this.btnReadPot_Click);
//
// label24
//
this.label24.AutoSize = true;
this.label24.Location = new System.Drawing.Point(20, 158);
this.label24.Name = "label24";
this.label24.Size = new System.Drawing.Size(79, 20);
this.label24.TabIndex = 297;
this.label24.Text = "负向状态：";
//
// txtNot
//
this.txtNot.Enabled = false;
this.txtNot.Location = new System.Drawing.Point(92, 155);
this.txtNot.Name = "txtNot";
this.txtNot.Size = new System.Drawing.Size(25, 26);
this.txtNot.TabIndex = 296;
//
// btnReadNot
//
this.btnReadNot.Location = new System.Drawing.Point(249, 147);
this.btnReadNot.Name = "btnReadNot";
this.btnReadNot.Size = new System.Drawing.Size(105, 33);
this.btnReadNot.TabIndex = 295;
this.btnReadNot.Text = "读负方向禁止输入";
this.btnReadNot.UseVisualStyleBackColor = true;
this.btnReadNot.Click += new System.EventHandler(this.btnReadNot_Click);
//
// btnChargingOut
//
this.btnChargingOut.Location = new System.Drawing.Point(247, 63);
this.btnChargingOut.Name = "btnChargingOut";
this.btnChargingOut.Size = new System.Drawing.Size(105, 33);
this.btnChargingOut.TabIndex = 24;
this.btnChargingOut.Text = "出料运行";
this.btnChargingOut.UseVisualStyleBackColor = true;
this.btnChargingOut.Click += new System.EventHandler(this.btnChargingOut_Click);
//
// btnChargingIn
//
this.btnChargingIn.Location = new System.Drawing.Point(247, 25);
this.btnChargingIn.Name = "btnChargingIn";
this.btnChargingIn.Size = new System.Drawing.Size(105, 33);
this.btnChargingIn.TabIndex = 23;
this.btnChargingIn.Text = "进料运行";
this.btnChargingIn.UseVisualStyleBackColor = true;
this.btnChargingIn.Click += new System.EventHandler(this.btnChargingIn_Click);
//
this.button6.Location = new System.Drawing.Point(12, 64);
this.button6.Name = "button6";
this.button6.Size = new System.Drawing.Size(105, 33);
this.button6.TabIndex = 16;
this.button6.Text = "门锁关闭";
this.button6.UseVisualStyleBackColor = true;
// btnChargingDown
//
// button5
this.btnChargingDown.Location = new System.Drawing.Point(127, 103);
this.btnChargingDown.Name = "btnChargingDown";
this.btnChargingDown.Size = new System.Drawing.Size(105, 33);
this.btnChargingDown.TabIndex = 22;
this.btnChargingDown.Text = "进料轴下移";
this.btnChargingDown.UseVisualStyleBackColor = true;
//
this.button5.Location = new System.Drawing.Point(12, 25);
this.button5.Name = "button5";
this.button5.Size = new System.Drawing.Size(105, 33);
this.button5.TabIndex = 15;
this.button5.Text = "门锁打开";
this.button5.UseVisualStyleBackColor = true;
// txtHeight
//
// btnChargingP0
this.txtHeight.Location = new System.Drawing.Point(391, 186);
this.txtHeight.Name = "txtHeight";
this.txtHeight.Size = new System.Drawing.Size(100, 26);
this.txtHeight.TabIndex = 21;
this.txtHeight.Text = "0";
//
this.btnChargingP0.Location = new System.Drawing.Point(127, 25);
this.btnChargingP0.Name = "btnChargingP0";
this.btnChargingP0.Size = new System.Drawing.Size(105, 33);
this.btnChargingP0.TabIndex = 17;
this.btnChargingP0.Text = "进料轴待机点";
this.btnChargingP0.UseVisualStyleBackColor = true;
// txtEnd
//
this.txtEnd.Location = new System.Drawing.Point(391, 154);
this.txtEnd.Name = "txtEnd";
this.txtEnd.Size = new System.Drawing.Size(100, 26);
this.txtEnd.TabIndex = 20;
this.txtEnd.Text = "0";
//
// txtStart
//
this.txtStart.Location = new System.Drawing.Point(391, 119);
this.txtStart.Name = "txtStart";
this.txtStart.Size = new System.Drawing.Size(100, 26);
this.txtStart.TabIndex = 19;
this.txtStart.Text = "0";
//
// btnChargingUp
//
......@@ -2333,44 +2463,38 @@
this.btnChargingUp.Text = "进料轴上移";
this.btnChargingUp.UseVisualStyleBackColor = true;
//
// txtStart
//
this.txtStart.Location = new System.Drawing.Point(371, 28);
this.txtStart.Name = "txtStart";
this.txtStart.Size = new System.Drawing.Size(100, 26);
this.txtStart.TabIndex = 19;
this.txtStart.Text = "0";
//
// txtEnd
// btnChargingP0
//
this.txtEnd.Location = new System.Drawing.Point(371, 63);
this.txtEnd.Name = "txtEnd";
this.txtEnd.Size = new System.Drawing.Size(100, 26);
this.txtEnd.TabIndex = 20;
this.txtEnd.Text = "0";
this.btnChargingP0.Location = new System.Drawing.Point(127, 25);
this.btnChargingP0.Name = "btnChargingP0";
this.btnChargingP0.Size = new System.Drawing.Size(105, 33);
this.btnChargingP0.TabIndex = 17;
this.btnChargingP0.Text = "进料轴待机点";
this.btnChargingP0.UseVisualStyleBackColor = true;
//
// txtHeight
// btnCloseLock
//
this.txtHeight.Location = new System.Drawing.Point(371, 95);
this.txtHeight.Name = "txtHeight";
this.txtHeight.Size = new System.Drawing.Size(100, 26);
this.txtHeight.TabIndex = 21;
this.txtHeight.Text = "0";
this.btnCloseLock.Location = new System.Drawing.Point(12, 64);
this.btnCloseLock.Name = "btnCloseLock";
this.btnCloseLock.Size = new System.Drawing.Size(105, 33);
this.btnCloseLock.TabIndex = 16;
this.btnCloseLock.Text = "门锁关闭";
this.btnCloseLock.UseVisualStyleBackColor = true;
//
// btnChargingDown
// btnOpenLock
//
this.btnChargingDown.Location = new System.Drawing.Point(127, 103);
this.btnChargingDown.Name = "btnChargingDown";
this.btnChargingDown.Size = new System.Drawing.Size(105, 33);
this.btnChargingDown.TabIndex = 22;
this.btnChargingDown.Text = "进料轴下移";
this.btnChargingDown.UseVisualStyleBackColor = true;
this.btnOpenLock.Location = new System.Drawing.Point(12, 25);
this.btnOpenLock.Name = "btnOpenLock";
this.btnOpenLock.Size = new System.Drawing.Size(105, 33);
this.btnOpenLock.TabIndex = 15;
this.btnOpenLock.Text = "门锁打开";
this.btnOpenLock.UseVisualStyleBackColor = true;
//
// FrmStoreBox
//
this.AutoScaleDimensions = new System.Drawing.SizeF(96F, 96F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Dpi;
this.ClientSize = new System.Drawing.Size(1029, 949);
this.ClientSize = new System.Drawing.Size(1029, 970);
this.Controls.Add(this.groupBoxChuck);
this.Controls.Add(this.groupBox4);
this.Controls.Add(this.groupBox1);
......@@ -2589,8 +2713,8 @@
private UserFromControl.IOStatusControl axis_4_Alarm;
private System.Windows.Forms.Label lblCharging;
private System.Windows.Forms.GroupBox groupBoxChuck;
private System.Windows.Forms.Button button6;
private System.Windows.Forms.Button button5;
private System.Windows.Forms.Button btnCloseLock;
private System.Windows.Forms.Button btnOpenLock;
private System.Windows.Forms.ToolStripMenuItem 打开门锁ToolStripMenuItem;
private System.Windows.Forms.ToolStripMenuItem 关闭门锁ToolStripMenuItem;
private System.Windows.Forms.TextBox txtHeight;
......@@ -2599,6 +2723,17 @@
private System.Windows.Forms.Button btnChargingUp;
private System.Windows.Forms.Button btnChargingP0;
private System.Windows.Forms.Button btnChargingDown;
private System.Windows.Forms.Button btnChargingOut;
private System.Windows.Forms.Button btnChargingIn;
private System.Windows.Forms.Label label20;
private System.Windows.Forms.Label label22;
private System.Windows.Forms.Label label23;
private System.Windows.Forms.TextBox txtPot;
private System.Windows.Forms.Button btnReadPot;
private System.Windows.Forms.Label label24;
private System.Windows.Forms.TextBox txtNot;
private System.Windows.Forms.Button btnReadNot;
private System.Windows.Forms.Button btnChargingOutOpenDoor;
}
}
source/ACSingleStore/FrmStoreBox.cs
......@@ -119,7 +119,7 @@ namespace OnlineStore.ACSingleStore
txtInOutP2.Text = ktkPosition.InOutAxis_DoorPosition_P2.ToString();
//txtUpDownP1.Text = ktkPosition.UpDownAxis_DoorOPosition_P1.ToString();
}
List<string> port = new List<string>(SerialPort.GetPortNames());
comboBoxPortName.DataSource = port;
if (port.IndexOf(store.Config.CompressAxis_PortName) >= 0)
......@@ -178,14 +178,14 @@ namespace OnlineStore.ACSingleStore
}
private bool LoadOk = false;
private void FrmTest_Load(object sender, EventArgs e)
{
{
LogUtil.logBox = this.richTextBox1;
initValue();
this.ShowInTaskbar = true;
this.Text = ConfigAppSettings.GetValue(Setting_Init.App_Title);
LoadOk = true;
cmbHomeType.SelectedIndex = 1;
HideForm();
// HideForm();
}
private DateTime preReadModblsTime = DateTime.Now;
private void timer1_Tick(object sender, EventArgs e)
......@@ -227,7 +227,7 @@ namespace OnlineStore.ACSingleStore
}
lblThisSta.Text = store.GetRunStr();
//复位按钮状态显示
if (复位ToolStripMenuItem.Enabled == false)
{
......@@ -323,6 +323,16 @@ namespace OnlineStore.ACSingleStore
// btnCloseWCF.Enabled = false ;
//}
//add by renyym 2018-11-27
//进料轴处理
if (iSoftTime1 == 0)
{
ChargingInProg();
}
else
iSoftTime1--;
}
private void ReadPosistion()
......@@ -332,7 +342,7 @@ namespace OnlineStore.ACSingleStore
//判断私服是否打开、
if (ACServerManager.ServerOnStatus(portName, SlvAddr))
{
lblServerOn.Text = "伺服ON";
lblServerOn.Text = "伺服ON";
}
else
{
......@@ -453,6 +463,8 @@ namespace OnlineStore.ACSingleStore
private void btnInStore_Click(object sender, EventArgs e)
{
//进料轴上料移动
// store.ChargingLoad();
if (store.storeRunStatus >= StoreRunStatus.HomeMoving)
{
string selectPositionNum = cmbPosition.Text;
......@@ -571,8 +583,8 @@ namespace OnlineStore.ACSingleStore
return;
}
}
LogUtil.info("点击【绝对运动】，端口号【"+ portName + "】地址【" + SlvAddr + "】位置【" + position + "】速度【" + speed + "】");
ACServerManager.AbsMove(portName, SlvAddr, position, speed );
LogUtil.info("点击【绝对运动】，端口号【" + portName + "】地址【" + SlvAddr + "】位置【" + position + "】速度【" + speed + "】");
ACServerManager.AbsMove(portName, SlvAddr, position, speed);
}
private void btnAxisVMove_Click(object sender, EventArgs e)
{
......@@ -593,7 +605,7 @@ namespace OnlineStore.ACSingleStore
}
}
LogUtil.info("点击【匀速运动】，端口号【" + portName + "】地址【" + SlvAddr + "】 速度【" + speed + "】");
ACServerManager.SpeedMove(portName, SlvAddr, speed);
ACServerManager.SpeedMove(portName, SlvAddr, speed);
}
private void btnAxisRMove_Click(object sender, EventArgs e)
......@@ -627,7 +639,7 @@ namespace OnlineStore.ACSingleStore
ACServerManager.RelMove(portName, SlvAddr, position, speed);
}
private void btnAxisStop_Click(object sender, EventArgs e)
{
......@@ -768,7 +780,7 @@ namespace OnlineStore.ACSingleStore
{
InOutDefaultPosition = 3000;
}
int currValue = ACServerManager.GetActualtPosition(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
int currValue = ACServerManager.GetActualtPosition(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
if (currValue <= InOutDefaultPosition)
{
return true;
......@@ -785,13 +797,13 @@ namespace OnlineStore.ACSingleStore
}
private void AxisABSMove(ConfigMoveAxis moveAxis, int targetPosition, int targetSpeed)
{
moveAxis.TargetPosition = targetPosition;
moveAxis.TargetPosition = targetPosition;
ACServerManager.AbsMove(moveAxis.DeviceName, moveAxis.GetAxisValue(), targetPosition, targetSpeed);
}
private void btnUpDownP1_Click(object sender, EventArgs e)
{
if (InOutIsIsP1())
{
{
int value = FormUtil.GetIntValue(txtUpDownP1);
AxisABSMove(store.Config.UpDown_Axis, value, store.Config.UpDownAxis_P1_Speed);
}
......@@ -975,7 +987,7 @@ namespace OnlineStore.ACSingleStore
//{
// FormManager.ShowAxisConfig(store);
//}
private void 轴卡点动ToolStripMenuItem_Click(object sender, EventArgs e)
{
......@@ -1038,14 +1050,14 @@ namespace OnlineStore.ACSingleStore
private void 料仓运转ONToolStripMenuItem_Click(object sender, EventArgs e)
{
this.Enabled = false;
store.RunAxis(false );
store.RunAxis(false);
this.Enabled = true;
LogUtil.info("料仓运转ON完成");
}
private void 扫码测试ToolStripMenuItem_Click(object sender, EventArgs e)
{
store.KNDIOMove(IO_Type.CameraLight_Power, IO_VALUE.HIGH);
store.KNDIOMove(IO_Type.CameraLight_Power, IO_VALUE.HIGH);
string message = "";
string outMsg = "";
//List<string> codeList = HDevelopExport.CameraScan(out outMsg);
......@@ -1056,10 +1068,10 @@ namespace OnlineStore.ACSingleStore
//}
List<string> codeList = CodeManager.CameraScan();
foreach (string str in codeList)
{
message = message + str + "##";
{
message = message + str + "##";
}
LogUtil.info("扫码测试收到二维码【"+outMsg+"】：" + message);
LogUtil.info("扫码测试收到二维码【" + outMsg + "】：" + message);
store.KNDIOMove(IO_Type.CameraLight_Power, IO_VALUE.LOW);
}
......@@ -1132,7 +1144,7 @@ namespace OnlineStore.ACSingleStore
}
/// <summary>
/// <summary>
/// 判断AC伺服电机轴是否运动完成
/// </summary>
protected bool ACAxisMoveIsEnd(ConfigMoveAxis moveAxis, int targetPosition, int targetSpeed, out string msg)
......@@ -1160,9 +1172,9 @@ namespace OnlineStore.ACSingleStore
else if (errorCount <= moveAxis.CanErrorCountMin)
{
LogUtil.info(LOGGER, " DeviceName=" + deviceName + ",AxisNo=" + axisNo + ",targetPosition=" + targetPosition + ",当前outCount=" + outCount +
",误差值小于最小误差【" + moveAxis.CanErrorCountMin + "】,默认轴已经停止运动");
",误差值小于最小误差【" + moveAxis.CanErrorCountMin + "】,默认轴已经停止运动");
return true;
}
}
return false;
}
public bool IsInProcess = false;
......@@ -1180,7 +1192,7 @@ namespace OnlineStore.ACSingleStore
foreach (WaitResultInfo wait in list)
{
if (wait.WaitType == 1)
{
{
string msg = "";
bool isEnd = ACAxisMoveIsEnd(wait.AxisInfo, wait.TargetPosition, wait.TargetSpeed, out msg);
if (!msg.Equals(""))
......@@ -1194,7 +1206,7 @@ namespace OnlineStore.ACSingleStore
isOk = false;
break;
}
}
}
}
if (list.Count > 0 && isOk.Equals(true))
{
......@@ -1206,8 +1218,8 @@ namespace OnlineStore.ACSingleStore
IsInProcess = false;
}
public List<WaitResultInfo> waitResultList = new List<WaitResultInfo>();
private int GetSlaveAddr()
{
return FormUtil.GetShortValue(txtAxisValue);
......@@ -1233,7 +1245,7 @@ namespace OnlineStore.ACSingleStore
return;
}
}
int speed = FormUtil.GetIntValue(txtASpeed);
LogUtil.info("点击【原点返回】，端口号【" + portName + "】地址【" + SlvAddr + "】 速度【" + speed + "】");
ACServerManager.HomeMove(portName, SlvAddr, speed);
......@@ -1253,9 +1265,9 @@ namespace OnlineStore.ACSingleStore
private void button1_Click_1(object sender, EventArgs e)
{
int value = ACServerManager.GetBusyStatus(GetPortName(), GetSlaveAddr());
this.txtBusyStatus.Text = value.ToString();
this.txtBusyStatus.Text = value.ToString();
}
private void button2_Click(object sender, EventArgs e)
{
int value = ACServerManager.GetHomeEndStatus(GetPortName(), GetSlaveAddr());
......@@ -1294,9 +1306,9 @@ namespace OnlineStore.ACSingleStore
{
FrmPwd fw = new FrmPwd(10);
DialogResult result = fw.ShowDialog();
if (!result.Equals(DialogResult.OK))
if (!result.Equals(DialogResult.OK))
{
LogUtil.info("切换界面显示时，没有正确输入密码");
LogUtil.info("切换界面显示时，没有正确输入密码");
return;
}
this.Visible = true;
......@@ -1332,7 +1344,7 @@ namespace OnlineStore.ACSingleStore
}
private void toolStripMenuItem1_Click(object sender, EventArgs e)
{
DialogResult result = MessageBox.Show("是否确定退出？", "提示", MessageBoxButtons.YesNo,MessageBoxIcon.Question);
DialogResult result = MessageBox.Show("是否确定退出？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question);
if (result.Equals(DialogResult.Yes))
{
ExitApp();
......@@ -1354,7 +1366,7 @@ namespace OnlineStore.ACSingleStore
private void 退出ToolStripMenuItem_Click(object sender, EventArgs e)
{
DialogResult result = MessageBox.Show("是否确定退出？", "提示", MessageBoxButtons.YesNo,MessageBoxIcon.Question);
DialogResult result = MessageBox.Show("是否确定退出？", "提示", MessageBoxButtons.YesNo, MessageBoxIcon.Question);
if (result.Equals(DialogResult.Yes))
{
ExitApp();
......@@ -1364,7 +1376,7 @@ namespace OnlineStore.ACSingleStore
private void 摄像机调试ToolStripMenuItem_Click(object sender, EventArgs e)
{
store.KNDIOMove(IO_Type.CameraLight_Power, IO_VALUE.HIGH);
CodeLibrary.FrmCodeDecode frm = new FrmCodeDecode( );
CodeLibrary.FrmCodeDecode frm = new FrmCodeDecode();
frm.ShowDialog();
store.KNDIOMove(IO_Type.CameraLight_Power, IO_VALUE.LOW);
}
......@@ -1429,7 +1441,7 @@ namespace OnlineStore.ACSingleStore
{
int posi = FormUtil.GetIntValue(txtLinePosition);
ShuoKeControls.RelativeMove(this.store.Config.CompressAxis_Slv, posi);
}
}
private void btnStatusSearch_Click(object sender, EventArgs e)
{
ShuoKeControls.GetStatus(store.Config.CompressAxis_Slv);
......@@ -1459,19 +1471,617 @@ namespace OnlineStore.ACSingleStore
private void 打开门锁ToolStripMenuItem_Click(object sender, EventArgs e)
{
//store.KNDIOMove(IO_Type.GateLock_Open, IO_VALUE.HIGH);
//store.KNDIOMove(IO_Type.GateLock_Close, IO_VALUE.LOW);
store.KNDIOMove(IO_Type.GateLock_Open, IO_VALUE.HIGH);
store.KNDIOMove(IO_Type.GateLock_Close, IO_VALUE.LOW);
lblWarnMsg.Text = "门锁开始打开!";
iChargingInStatus = 21;
}
private void 关闭门锁ToolStripMenuItem_Click(object sender, EventArgs e)
{
//store.KNDIOMove(IO_Type.GateLock_Open, IO_VALUE.LOW);
//store.KNDIOMove(IO_Type.GateLock_Close, IO_VALUE.HIGH);
if (store.KNDIOValue(IO_Type.Load_DoorClose) == IO_VALUE.HIGH)
{
store.KNDIOMove(IO_Type.GateLock_Open, IO_VALUE.LOW);
store.KNDIOMove(IO_Type.GateLock_Close, IO_VALUE.HIGH);
lblWarnMsg.Text = "门锁开始关闭!";
iChargingInStatus = 22;
}
else
lblWarnMsg.Text = "上料机构门未关闭，无法关锁，请关闭上料机构门后重新开始！";
}
private void iO状态查看ToolStripMenuItem_Click(object sender, EventArgs e)
{
}
/// <summary>
/// /////////////////////////////////////////////////////////////////////////////////////////////////////////
/// </summary>
private bool bolChargingIn = false;
private bool bolChargingOut = false;
// private int
//public enum ChargingRunStatus
//{
// Wait = 0,
// ///// <summary>
// ///// 初始化 ，原点返回状态中,只有流水线使用
// ///// </summary>
// HomeMoving = 1,
// /// <summary>
// /// 设备正在重置中，请稍后
// /// </summary>
// In = 2,In
// /// <summary>
// /// 正常运行中，可以进行新的处理
// /// </summary>
// Out = 3,
//}
private int iChargingInStatus = 0; //=0 等待 =1 上料轴向上移动 =2 吸盘向下移动
private int iChargingOutStatus = 0;
private int iChargingPlus = 0;
private int iChargingPlusLast = 0;
private void btnChargingIn_Click(object sender, EventArgs e)
{
LoadIn();
}
private void LoadIn()
{
if (store.KNDIOValue(IO_Type.Door_Up) == IO_VALUE.LOW && store.KNDIOValue(IO_Type.Door_Down) == IO_VALUE.HIGH) //判断进料门状态，是否关闭
{
if (store.KNDIOValue(IO_Type.Load_DoorClose) == IO_VALUE.HIGH)
{
if (store.KNDIOValue(IO_Type.GateLock_Open) == IO_VALUE.LOW && store.KNDIOValue(IO_Type.GateLock_Close) == IO_VALUE.HIGH)
{
this.btnChargingIn.Enabled = false;
// IO_VALUE trayCheck = store.KNDIOValue(IO_Type.Load_OutCheck);//Load_OutCheck
if (store.KNDIOValue(IO_Type.Load_OutCheck) == IO_VALUE.LOW)
{
//上端未检测到料盘
iChargingInStatus = 1;
bolCharging = true;
//获取当前位置
iChargingPlus = ACServerManager.GetTargetPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetAxisValue());
//原点位置
int value = ACServerManager.GetHomeSingle(GetPortName(), GetSlaveAddr());
// lblOutPulse4.Text = string.Format("{0:d}", lOutPulse4);
// int lCountPulse4 = ACServerManager.GetActualtPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetAxisValue());
//？ store.ChargingLoad();
iChargingInStatus = 2;
}
else//有料
{
iChargingInStatus = 3;
//取料、
//吸盘下移
store.KNDIOMove(IO_Type.Sucker_DownSOL, IO_VALUE.HIGH);
}
}
else
{
lblWarnMsg.Text = "门锁未关闭，请关闭门锁后重新开始";
}
}
else
lblWarnMsg.Text = "上料机构门未关闭，请关闭上料机构门后重新开始";
}
else
{
lblWarnMsg.Text = "进料门未关闭，请关闭进料门后重新开始";
}
}
private int iSoftTime1 = 0;
private bool bolBigBox = false;
private bool bolBox = false;
private int iBoxHigh = 0;
private void ChargingInProg()
{
int errorCount;
int outCount;
if (iChargingInStatus > 0)
{
switch (iChargingInStatus)
{
case 0:
break;
case 1:
ACServerManager.AbsMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue(), store.Config.ChargingAxis_MaxHigh_Position);
iChargingInStatus = 2;
break;
case 2:
if (bolChargingIn)
{
//料盘到位判断
IO_VALUE trayCheck = store.KNDIOValue(IO_Type.TrayCheck_Door);//Load_OutCheck 最高点检测
if (trayCheck == IO_VALUE.HIGH)
{
ACServerManager.SuddenStop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
iChargingInStatus = 17; //前往 上料轴下降程序归0;
}
else
{
if (store.KNDIOValue(IO_Type.Load_OutCheck) == IO_VALUE.HIGH)
{
bolChargingIn = false;
//上料机构停止
ACServerManager.SuddenStop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
//计算料高
iChargingPlusLast = iChargingPlus;
iChargingPlus = ACServerManager.GetTargetPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetAxisValue());
iBoxHigh = iChargingPlus - iChargingPlusLast;
//料盘宽度判断
IO_VALUE trayWidth1 = store.KNDIOValue(IO_Type.TrayWidth_Check1);
IO_VALUE trayWidth2 = store.KNDIOValue(IO_Type.TrayWidth_Check2);
if (trayWidth1 == IO_VALUE.HIGH)
bolBox = true;
if (trayWidth1 == IO_VALUE.HIGH && trayWidth2 == IO_VALUE.HIGH)
bolBigBox = true;
else
bolBigBox = false;
//开灯
store.KNDIOMove(IO_Type.CameraLight_Power, IO_VALUE.HIGH);
//扫码
string message = "";
string outMsg = "";
List<string> codeList = CodeManager.CameraScan();
foreach (string str in codeList)
{
message = message + "=1+0x0-7x" + " =" + str;
}
if (!outMsg.Equals(""))
{
LogUtil.error("盘尺寸错误，清理二维码【" + message + "】");
message = "";
iChargingInStatus = 20;
}
else
iChargingInStatus = 3;
//关灯
store.KNDIOMove(IO_Type.CameraLight_Power, IO_VALUE.LOW);
}
}
}
break;
case 3:
//吸盘运动：下
store.KNDIOMove(IO_Type.Sucker_DownSOL, IO_VALUE.HIGH);
iChargingInStatus = 4;
// iSoftTime1 = 10;//?
break;
case 4:
if (store.KNDIOValue(IO_Type.Chuck_Down) == IO_VALUE.HIGH)//
{
//吸盘停止运动
store.KNDIOMove(IO_Type.Sucker_DownSOL, IO_VALUE.LOW);
//延时
iChargingInStatus = 5;
}
break;
case 5:
//吸盘吸
//if
store.KNDIOMove(IO_Type.Sucker_SuctionSOL, IO_VALUE.HIGH);
iChargingInStatus = 6;
break;
case 6:
//吸盘是否吸住判断。
// if (store.KNDIOValue(IO_Type.Chuck_PressureOK) == IO_VALUE.HIGH)//
{
////吸盘上升
store.KNDIOMove(IO_Type.Sucker_UpSOL, IO_VALUE.HIGH);
iChargingInStatus = 7;
}
break;
case 7:
//吸盘顶端位置判断
if (store.KNDIOValue(IO_Type.Chuck_Up) == IO_VALUE.HIGH)//
{
//吸盘停止运动
store.KNDIOMove(IO_Type.Sucker_UpSOL, IO_VALUE.LOW);
//延时
iChargingInStatus = 8;
}
break;
case 8:
//
//判断上/下轴是否在位？判断旋转轴是否在位
outCount = ACServerManager.GetActualtPosition(store.Config.UpDown_Axis.DeviceName, store.Config.UpDown_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.UpDownAxis_DoorOPosition_P1);
if (errorCount <= store.Config.UpDown_Axis.CanErrorCountMin)
{
outCount = ACServerManager.GetActualtPosition(store.Config.Middle_Axis.DeviceName, store.Config.Middle_Axis.GetAxisValue());
errorCount = Math.Abs(outCount- store.Config.MiddleAxis_P1_Position);
if (errorCount <= store.Config.Middle_Axis.CanErrorCountMin)
{
ACServerManager.GetActualtPosition(store.Config.Middle_Axis.DeviceName, store.Config.Middle_Axis.GetAxisValue());
//进出轴出
ACServerManager.AbsMove(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue(), Convert.ToInt32(txtInOutP2.Text), store.Config.InOutAxis_P2_Speed);
//判断
iChargingInStatus = 9;
}
else
{
}
}
else
{
}
break;
case 9:
//判断进出轴是否到位？
outCount = ACServerManager.GetActualtPosition(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - Convert.ToInt32(txtInOutP2.Text)); //store.Config.InOutAxis_P1_Position);
if (errorCount <= store.Config.InOut_Axis.CanErrorCountMin)
{
//ACServerManager.GetTargetPosition()
//吸盘放掉料盘
store.KNDIOMove(IO_Type.Sucker_SuctionSOL, IO_VALUE.LOW);
iChargingInStatus = 10;
}
break;
case 10:
if (store.Config.IsHasCompress_Axis > 0)
{
//夹紧机构，夹紧操作
}
else
iChargingInStatus = 12;
break;
case 11:
//夹紧机构，是否夹紧判断
break;
case 12:
//进出轴退回
if (store.KNDIOValue(IO_Type.Chuck_PressureOK) == IO_VALUE.LOW) //??吸盘是否放掉
{
if (store.KNDIOValue(IO_Type.TrayCheck_Fixture) == IO_VALUE.HIGH) //??//料插上有料，
{
//判断上下轴是否在位？
outCount = ACServerManager.GetActualtPosition(store.Config.UpDown_Axis.DeviceName, store.Config.UpDown_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.UpDownAxis_DoorOPosition_P1);
if (errorCount <= store.Config.UpDown_Axis.CanErrorCountMin)
{
//进出轴退回
ACServerManager.AbsMove(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue(), store.Config.InOutAxis_P1_Position, store.Config.InOutAxis_P1_Speed);
iChargingInStatus = 13;
}
else
{
//上下轴移动
ACServerManager.AbsMove(store.Config.UpDown_Axis.DeviceName, store.Config.UpDown_Axis.GetAxisValue(), store.Config.UpDownAxis_DoorOBPosition_P7, store.Config.UpDownAxis_P7_Speed);
}
}
}
break;
case 13:
//判断进出轴是否退回？
outCount = ACServerManager.GetActualtPosition(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.InOutAxis_P1_Position);//Convert.ToInt32(txtInOutP2.Text)); //
if (errorCount <= store.Config.InOut_Axis.CanErrorCountMin)
{
//Yes：
iChargingInStatus = 1;
}
//上料轴运行
break;
case 17:
//进料轴归0；
ACServerManager.AbsMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue(), store.Config.ChargingAxis_P1_Position);
iChargingInStatus = 18;
break;
case 18:
//上料轴 0位判断
outCount = ACServerManager.GetActualtPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.ChargingAxis_P1_Position);//Convert.ToInt32(txtInOutP2.Text)); //
if (errorCount <= store.Config.Charging_Axis.CanErrorCountMin)
{
ACServerManager.Stop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetAxisValue());
//Yes：
iChargingInStatus = 0;//end
}
break;
case 20:
//挂起
break;
case 21://门锁关闭状态判断
if (store.KNDIOValue(IO_Type.GateLock_Open) == IO_VALUE.LOW && store.KNDIOValue(IO_Type.GateLock_Close) == IO_VALUE.HIGH)
{
this.lblMsg.Text = "门锁已关闭";
iChargingInStatus = 0;
}
break;
case 22://门锁打开状态判断
if (store.KNDIOValue(IO_Type.GateLock_Close) == IO_VALUE.LOW && store.KNDIOValue(IO_Type.GateLock_Open) == IO_VALUE.HIGH)
{
this.lblMsg.Text = "门锁已打开";
iChargingInStatus = 0;
}
break;
default:
break;
}
}
}
private void ChargingOutProg()
{
int errorCount;
int outCount;
switch (iChargingOutStatus)
{
case 0:
break;
case 1:
if (store.KNDIOValue(IO_Type.Load_DoorClose) == IO_VALUE.HIGH) //上料机构门是否关闭
{
ACServerManager.RelMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue(), store.Config.ChargingAxis_MaxHigh_Position);
iChargingOutStatus = 2;
}
break;
case 2:
//判断 是否检测到料盘 最高位
IO_VALUE trayCheck = store.KNDIOValue(IO_Type.TrayCheck_Door);//Load_OutCheck
if (trayCheck == IO_VALUE.HIGH)
{
ACServerManager.Stop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
iChargingOutStatus = 3;
}
else
{
if(store.KNDIOValue(IO_Type.Load_OutCheck)==IO_VALUE.HIGH)
{
ACServerManager.Stop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
//有料
this.lblMsg.Text = "进料轴上有料，请移除料盘后，再出料。";
}
}
break;
case 3:
//寻找仓位，获取料高
//从仓位取料盘-》P1 位；
//进出轴 出来取料仓位取料
//获取料高
iChargingOutStatus = 4;
break;
case 5:
//进出轴 出来取料
//判断 上下轴是否到位
outCount = ACServerManager.GetActualtPosition(store.Config.UpDown_Axis.DeviceName, store.Config.UpDown_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.UpDownAxis_DoorIPosition_P2);
if (errorCount <= store.Config.UpDown_Axis.CanErrorCountMin)
{
//判断旋转轴是否到位
outCount = ACServerManager.GetActualtPosition(store.Config.Middle_Axis.DeviceName, store.Config.Middle_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.MiddleAxis_P1_Position);
if (errorCount <= store.Config.Middle_Axis.CanErrorCountMin)
{
//判断进出轴是否在P1位
outCount = ACServerManager.GetActualtPosition(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.InOutAxis_P1_Position);
if (errorCount <= store.Config.InOut_Axis.CanErrorCountMin)
{
// ACServerManager.GetActualtPosition(store.Config.Middle_Axis.DeviceName, store.Config.Middle_Axis.GetAxisValue());
//进出轴出
ACServerManager.AbsMove(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue(), Convert.ToInt32(txtInOutP2.Text), store.Config.InOutAxis_P2_Speed);
//判断
iChargingInStatus = 6;
}
else
{
//进出轴到P1位置
}
}
else
{
//旋转轴到-->p1位
}
}
else
{
//上下轴到P2位
}
//判断 旋转轴是否到位
break;
case 6:
outCount = ACServerManager.GetActualtPosition(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - Convert.ToInt32(txtInOutP2.Text));
if (errorCount <= store.Config.InOut_Axis.CanErrorCountMin)
{
ACServerManager.SuddenStop(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
////上下轴 下移至P1位
ACServerManager.AbsMove(store.Config.UpDown_Axis.DeviceName, store.Config.UpDown_Axis.GetAxisValue(), store.Config.UpDownAxis_DoorOPosition_P1);
iChargingOutStatus = 7;
}
break;
case 7:
//上下轴 是否到P1位判断
outCount = ACServerManager.GetActualtPosition(store.Config.UpDown_Axis.DeviceName, store.Config.UpDown_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.UpDownAxis_DoorOPosition_P1);
if (errorCount <= store.Config.UpDown_Axis.CanErrorCountMin)
{
ACServerManager.SuddenStop(store.Config.UpDown_Axis.DeviceName, store.Config.UpDown_Axis.GetAxisValue());
////上下轴 下移至P1位
ACServerManager.AbsMove(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue(), store.Config.InOutAxis_P1_Position);
iChargingOutStatus = 8;
}
break;
case 8:// 夹紧机构 松
//判断进出轴是否退到P1;
outCount = ACServerManager.GetActualtPosition(store.Config.InOut_Axis.DeviceName, store.Config.InOut_Axis.GetAxisValue());
errorCount = Math.Abs(outCount - store.Config.InOutAxis_P1_Position);
if (errorCount <= store.Config.InOut_Axis.CanErrorCountMin)
{
//夹紧 机构松 操作
}
break;
case 9:
//判断夹紧 机构是否已松松
{
//进料轴移动下移（料高距离）
iBoxHigh = 100;
iChargingPlusLast = iChargingPlus;
ACServerManager.AbsMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue(), iBoxHigh);
iChargingOutStatus = 10;
}
break;
case 10:
outCount = ACServerManager.GetTargetPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
errorCount = Math.Abs(outCount - store.Config.ChargingAxis_P1_Position);
if (errorCount <= store.Config.Charging_Axis.CanErrorCountMin)
{
ACServerManager.SuddenStop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
iChargingOutStatus = 11;
}
else
{
//errorCount = Math.Abs(outCount - store.Config.ChargingAxis_P1_Position);
if (store.KNDIOValue(IO_Type.Load_OutCheck) == IO_VALUE.LOW)
{
ACServerManager.SuddenStop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
iChargingOutStatus = 3;
}
}
break;
case 11:
//上料仓满了
this.bolChargingOutFinish = true;
iChargingOutStatus = 0;
break;
///---------------------------
//开门出料
case 115:
IO_VALUE value1 = store.KNDIOValue(IO_Type.Load_OutCheck);
if (value1 == IO_VALUE.HIGH)
{
//电机停止
ACServerManager.SuddenStop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
iChargingOutStatus = 116;
}
else
{
outCount = ACServerManager.GetActualtPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
errorCount = Math.Abs(outCount - store.Config.ChargingAxis_MaxHigh_Position);
if (errorCount <= store.Config.ChargingAxis_PositionMin)
{
ACServerManager.SuddenStop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
iChargingOutStatus = 117;
}
}
break;
case 116:
IO_VALUE value2 = store.KNDIOValue(IO_Type.Load_OutCheck);
if (value2 == IO_VALUE.LOW)
{
ACServerManager.RelMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue(), store.Config.ChargingAxis_MaxHigh_Position);
iChargingOutStatus = 115;
}
break;
case 117:
//结束出料 上移， 轴下降
bolChargingOutFinish = false;
ACServerManager.RelMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue(), store.Config.ChargingAxis_P1_Position);
iChargingOutStatus = 118;
break;
case 118:
//读位置；
outCount = ACServerManager.GetActualtPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
errorCount = Math.Abs(outCount - store.Config.ChargingAxis_P1_Position);
if (errorCount <= store.Config.ChargingAxis_PositionMin)
{
ACServerManager.SuddenStop(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
iChargingInStatus = 0;
}
break;
}
}
//出料操作
private void btnChargingOut_Click(object sender, EventArgs e)
{
int outCount = ACServerManager.GetActualtPosition(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue());
int errorCount = Math.Abs(outCount - store.Config.ChargingAxis_P1_Position);
if (errorCount <= store.Config.ChargingAxis_PositionMin) //最低位
{
if (store.KNDIOValue(IO_Type.Load_DoorClose) == IO_VALUE.HIGH) //上料机构门打开
{
ACServerManager.RelMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetValue(), store.Config.ChargingAxis_MaxHigh_Position,store.Config.ChargingAxis_TargetSpeed);
iChargingOutStatus = 2;
}
else
{
//关闭上料门
iChargingOutStatus = 1;
}
}
else
{
//error ：不在最低位
}
}
private void btnReadNot_Click(object sender, EventArgs e)
{
int value = ACServerManager.GetNotStatus(GetPortName(), GetSlaveAddr());
this.txtNot.Text = value.ToString();
}
private void btnReadPot_Click(object sender, EventArgs e)
{
int value = ACServerManager.GetPotStatus(GetPortName(), GetSlaveAddr());
this.txtPot.Text = value.ToString();
}
private bool bolChargingOutFinish = false;
private void btnChargingOutOpenDoor_Click(object sender, EventArgs e)
{
if (bolChargingOutFinish)
{
int value = ACServerManager.GetNotStatus(GetPortName(), GetSlaveAddr());
if (value < 100) //
ACServerManager.AbsMove(store.Config.Charging_Axis.DeviceName, store.Config.Charging_Axis.GetAxisValue(), 10, store.Config.ChargingAxis_HomeLowSpeed);
}
}
}
}
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean.cs
......@@ -36,6 +36,9 @@ namespace OnlineStore.DeviceLibrary
/// 轴报警信息
/// </summary>
private Dictionary<string , AxisAlarmInfo> AxisAlarmCodeMap = new Dictionary<string , AxisAlarmInfo>();
/// <summary>
/// 是否有上料轴 add by renym 2018
/// </summary>
public bool IsHasCharging_Axis = false;
/// <summary>
......@@ -146,7 +149,7 @@ namespace OnlineStore.DeviceLibrary
moveAxisList.Add(Config.Middle_Axis);
moveAxisList.Add(Config.UpDown_Axis);
moveAxisList.Add(Config.InOut_Axis);
//2018-11-22
//2018-11-22 add by renym
moveAxisList.Add(Config.Charging_Axis);
this.AxisAlarmCodeMap = new Dictionary<string , AxisAlarmInfo>();
this.AxisAlarmCodeMap.Add(Config.UpDown_Axis.DeviceName, new AxisAlarmInfo());
......@@ -348,6 +351,32 @@ namespace OnlineStore.DeviceLibrary
StoreMove.WaitList.Add(WaitResultInfo.WaitTime(2000));
}
}
///add by renym 2018-11-27
///
/// 进料轴原点复位
///
///
private void ChargingStartReset()
{
string portName = Config.Charging_Axis.DeviceName;
int slvAddr = Config.Charging_Axis.GetAxisValue();
if (ACServerManager.GetHomeEndStatus(portName, slvAddr).Equals(1)
&& ACServerManager.GetHomeSingle(portName, slvAddr).Equals(1))
{
//？ StoreMove.NextMoveStep(StoreMoveStep.BOX_H_ChargingMove);//?
LogUtil.info(LOGGER, StoreName + "复位中，进料轴原点亮且已经原点返回过，先相对走-5000");
int currPos = ACServerManager.GetActualtPosition(portName, slvAddr);
int targetPos = currPos - 5000;//??
ACAxisMove(Config.Charging_Axis, targetPos, Config.ChargingAxis_HomeLowSpeed);
}
else
{
//? StoreMove.NextMoveStep(StoreMoveStep.BOX_H_ChargingBack);//?
LogUtil.info(LOGGER, StoreName + "复位中，进料轴开始原点返回");
ACAxisHomeMove(Config.Charging_Axis);
StoreMove.WaitList.Add(WaitResultInfo.WaitTime(2000));
}
}
/// <summary>
/// 复位处理
/// </summary>
......@@ -1319,6 +1348,9 @@ namespace OnlineStore.DeviceLibrary
ACServerManager.SuddenStop(Config.Middle_Axis.DeviceName, Config.Middle_Axis.GetAxisValue());
ACServerManager.SuddenStop(Config.UpDown_Axis.DeviceName, Config.UpDown_Axis.GetAxisValue());
ACServerManager.SuddenStop(Config.InOut_Axis.DeviceName, Config.InOut_Axis.GetAxisValue());
//add by renym 2018-11-27
if(IsHasCharging_Axis)
ACServerManager.SuddenStop(Config.Charging_Axis.DeviceName, Config.Charging_Axis.GetAxisValue());
if (IsHasCompress_Axis)
{
ShuoKeControls.SuddownStop(Config.CompressAxis_Slv);
......@@ -1339,6 +1371,7 @@ namespace OnlineStore.DeviceLibrary
LogUtil.info(LOGGER, StoreName + "StopMove");
KNDIOMove(IO_Type.Door_Down, IO_VALUE.LOW);
KNDIOMove(IO_Type.Door_Up, IO_VALUE.LOW);
//？add 进料门锁
//HDevelopExport.CloseAllCamera();
isInPro = false;
}
......
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean_Partial.cs
......@@ -776,6 +776,7 @@ namespace OnlineStore.DeviceLibrary
}
#endregion
#region 自动上料上料机构处理
private bool bolChargingRun = false;
public void ChargingLoad()
{
//1、上料门是否关闭
......@@ -786,13 +787,17 @@ namespace OnlineStore.DeviceLibrary
//3、吸盘在最高端
if (KNDIOValue(IO_Type.Chuck_Up).Equals(IO_VALUE.HIGH))
{
//吸盘移动到最高点
}
//if (KNDIOValue(IO_Type.Load_DoorClose).Equals(IO_VALUE.HIGH))
//通过读伺服线圈信息，判断伺服在最高位置还是在最低位置
int value=ACServerManager.GetNotStatus(Config.Charging_Axis.DeviceName, Config.Charging_Axis.GetAxisValue());
//4、判断上料机构是否在最高点？ 是---》无料盘 TrayCheck_Door
//5、是否检测到料盘？检测到，不运行；检测不到伺服运行
//电机运动 ACAxisMove(Config.Charging_Axis, ??, Config.Charging_Axis.TargetSpeed);
//电机运动 ACAxisMove(Config.Charging_Axis, ??, Config.Charging_Axis.TargetSpeed);
bolChargingRun = true;
ACAxisMove(Config.Charging_Axis,Config.ChargingAxis_PositionMin, Config.ChargingAxis_HomeLowSpeed);
}
}
......
source/DeviceLibrary/store/LineAlarm.cs
......@@ -51,7 +51,7 @@ namespace OnlineStore.DeviceLibrary
//
/// add by renym 2018-11-26
/// /// <summary>
/// 轴四（上料轴）报警
/// 轴五（上料轴）报警
/// </summary>
public static int ChargingAxisAlarm = 18;
}
......
source/DeviceLibrary/store/StoreManager.cs
......@@ -26,13 +26,13 @@ namespace OnlineStore.DeviceLibrary
public static readonly ILog LOGGER = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
public static Dictionary<int, StoreConfig> storeConfigMap = new Dictionary<int, StoreConfig>();
//private static Dictionary<int, object> storeMap = new Dictionary<int, object>();
private static bool isInit = false;
public StoreManager()
{
{
}
public static void CheckEnum(Type type)
{
if (type.IsEnum)
......@@ -42,7 +42,7 @@ namespace OnlineStore.DeviceLibrary
{
if (valueList.Contains(item))
{
LogUtil.error(LOGGER, type.Name+"枚举值："+item +"重复存在，请检查代码！");
LogUtil.error(LOGGER, type.Name + "枚举值：" + item + "重复存在，请检查代码！");
Application.Exit();
break;
}
......@@ -50,8 +50,8 @@ namespace OnlineStore.DeviceLibrary
}
}
}
public static string GetPostApi(string host)
{
if (host == "")
......@@ -84,7 +84,7 @@ namespace OnlineStore.DeviceLibrary
}
return host + api_nextFeeder;
}
public static void UpdateConfig(AC_SA_Config lineConfig)
{
try
......@@ -97,7 +97,7 @@ namespace OnlineStore.DeviceLibrary
if (!result)
{
LOGGER.Error("保存配置文件失败：" + configFile);
}
}
}
catch (Exception ex)
{
......@@ -123,7 +123,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 设备正在重置中，请稍后
/// </summary>
Reset = 2,
Reset = 2,
/// <summary>
/// 正常运行中，可以进行新的处理
/// </summary>
......@@ -133,6 +133,10 @@ namespace OnlineStore.DeviceLibrary
/// 正在忙碌中，请稍后
/// </summary>
Busy = 4,
///
///进料轴运行
///
ChargingMoving = 5, //add by Renym 2018-11-27
}
/// <summary>
......@@ -150,7 +154,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
///2=急停中
/// </summary>
SuddenStop = 2,
SuddenStop = 2,
/// <summary>
/// 3=故障中
/// </summary>
......@@ -162,15 +166,15 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 5=设备调试中
/// </summary>
Debugging = 5,
Debugging = 5,
/// <summary>
/// 6=入库执行中
/// </summary>
InStoreExecute = 6,
InStoreExecute = 6,
/// <summary>
/// 7= 入仓位完成（料仓Box把料盘放入对应的库位中，装置还未恢复原始状态）
/// </summary>
InStoreEnd = 7,
InStoreEnd = 7,
/// <summary>
/// 8=入库失败
/// </summary>
......@@ -194,7 +198,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 重置中（原点返回和重置都发此状态）
/// </summary>
ResetMove=13,
ResetMove = 13,
}
/// <summary>
......@@ -210,17 +214,17 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 料仓原点返回和重置步骤，，定位气缸下降
/// </summary>
BOX_H_LocationCylinderBack=010,
BOX_H_LocationCylinderBack = 010,
/// <summary>
/// 料仓原点返回和重置步骤，轴三先相对走3000
/// </summary>
BOX_H_InOutMove=011,
BOX_H_InOutMove = 011,
/// <summary>
/// 料仓原点返回和重置步骤，，轴三进出轴先返回原点
/// </summary>
BOX_H_InOutBack = 012,
/// <summary>
/// 料仓原点返回和重置步骤，，轴三返回P1点
/// </summary>
......@@ -236,12 +240,12 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 旋转轴返回P1
/// </summary>
BOX_H_MiddleAxisToP1=016,
BOX_H_MiddleAxisToP1 = 016,
/// <summary>
/// 叉子先退回P1
/// </summary>
BOX_M_H_InOutToP1=018,
BOX_M_H_InOutToP1 = 018,
/// <summary>
/// 旋转轴回原点
/// </summary>
......@@ -250,7 +254,15 @@ namespace OnlineStore.DeviceLibrary
/// 旋转轴等待清理位置
/// </summary>
BOX_M_H_MiddleWait = 020,
//add by renym 2018-11-27
/// <summary>
/// 料仓原点返回和重置步骤，轴 五先相对走3000
/// </summary>
//？ BOX_H_ChargingMove = 021,
/// <summary>
/// 料仓原点返回和重置步骤，，轴五进料轴先返回原点
/// </summary>
//？ BOX_H_ChargingBack = 022,
/// <summary>
/// 叉子走到P1
/// </summary>
......@@ -270,7 +282,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
///料仓出库，，定位气缸下降
/// </summary>
SO_01_LocationCylinderDown=101,
SO_01_LocationCylinderDown = 101,
/// <summary>
///料仓出库：叉子先运动到P1
/// </summary>
......@@ -330,7 +342,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 等待拿走物品
/// </summary>
SO_14_WaitTake=114,
SO_14_WaitTake = 114,
#endregion
......@@ -338,11 +350,11 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 入库检测
/// </summary>
SI_00_TrayCheck=200,
SI_00_TrayCheck = 200,
/// <summary>
/// 入库，。定位气缸下降
/// </summary>
SI_01_LocationCylinderDown=201,
SI_01_LocationCylinderDown = 201,
/// <summary>
/// 入库。。进出轴（叉子）先返回P1
/// </summary>
......@@ -363,7 +375,7 @@ namespace OnlineStore.DeviceLibrary
/// 入库。。把物品放入叉子上，轴2（ 上下） 至P7（ 进料口取料缓冲点）,压紧物品（有压紧轴的才需要此步骤），轴4（ 压紧） 至P2(压紧点)
/// </summary>
SI_06_DoorWarToDevice = 206,
/// <summary>
/// 入库。。叉子 从入料口抽出，轴3（ 叉子） 至P1（ 待机点）
/// </summary>
......@@ -453,7 +465,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 阻挡气缸0-2上升
/// </summary>
LI_03_StopCylinder2Up = 10006,
LI_03_StopCylinder2Up = 10006,
/// <summary>
/// 阻挡气缸0-1下降
/// </summary>
......@@ -517,11 +529,11 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 等待StoreMove完成当前操作开始入库
/// </summary>
MIO_08_WaitInStore=3088,
MIO_08_WaitInStore = 3088,
/// <summary>
/// 等待StoreMove移走料盘开始放托盘通过
/// </summary>
MIO_09_WaitLetFixtureGo=3089,
MIO_09_WaitLetFixtureGo = 3089,
#endregion
#region 移栽装置出库处理
......@@ -573,7 +585,7 @@ namespace OnlineStore.DeviceLibrary
/// 移栽装置出库处理。。 前后气缸1后退（ Y20=0/Y21=1)
/// </summary>
MO_56_BeforeAfterCylinderAfter = 3156,
/// <summary>
/// 移载（流水线）装置出库处理，，， 上下气缸1下降(Y22=0/Y23=1)
/// </summary>
......@@ -586,9 +598,9 @@ namespace OnlineStore.DeviceLibrary
/// 移载（流水线）装置出库处理，， ，上下气缸1上升(Y22=1/Y23=0)
/// </summary>
MO_60_UpDownCylinderUp = 3160,
#endregion
......@@ -602,7 +614,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 移载装置入库处理，，等待box等待状态才能继续操作
/// </summary>
MI_10_WaitBox=3006,
MI_10_WaitBox = 3006,
/// <summary>
///移载装置入库处理，，编码与仓位一致，，上下气缸1下降(Y22=0/Y23=1)
/// </summary>
......@@ -659,7 +671,7 @@ namespace OnlineStore.DeviceLibrary
///移载装置入库处理，,,阻挡气缸1-2 上升（ Y15=0）,等待200毫秒
/// </summary>
MI_23_StopCylinderReset = 3023,
#endregion
......@@ -681,11 +693,11 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 关闭皮带
/// </summary>
LINEIN_CloseLine=20003,
LINEIN_CloseLine = 20003,
/// <summary>
/// 等待下位机要料信号
/// </summary>
LINEIN_WatiMachineSingle=20004,
LINEIN_WatiMachineSingle = 20004,
/// <summary>
/// 双层料仓流水线模块 。线体调宽回原点
......@@ -694,7 +706,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 双层料仓流水线模块 。线体调宽回原点
/// </summary>
LINECW_LineChangeWidth = 20011,
LINECW_LineChangeWidth = 20011,
/// <summary>
/// 流水线原点返回，设置速度
......@@ -707,7 +719,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 流水线原点返回，开始原点返回
/// </summary>
LINEH_LineHome_003= 20022,
LINEH_LineHome_003 = 20022,
#endregion
......@@ -761,11 +773,11 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
///在线双层料仓： 旋转电机2反转，回到中间等待位置
/// </summary>
DB_SI_11_MoveSIFromRoom = 20111,
DB_SI_11_MoveSIFromRoom = 20111,
/// <summary>
/// 在线双层料仓：关闭仓门
/// </summary>
DB_SI_12_CloseDoor = 20112,
DB_SI_12_CloseDoor = 20112,
#endregion
#region 在线料仓出库处理
......@@ -817,7 +829,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 在线双层料仓：等待物料到达
/// </summary>
DB_SO_11_WaitTrayToDoor= 20211,
DB_SO_11_WaitTrayToDoor = 20211,
/// <summary>
/// 在线双层料仓：等待拿走料盘
/// </summary>
......@@ -826,7 +838,7 @@ namespace OnlineStore.DeviceLibrary
/////在线双层料仓：出库执行 旋转电机2反转，回到中间等待位置
///// </summary>
//DB_SO_11_MoveOutFromRoom = 20211,
///// <summary>
///// 在线双层料仓：出库执行（关闭仓门
///// </summary>
......@@ -840,7 +852,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 在线双层料仓：回原点：同时动作：转盘低速旋转 ， 电缸回到原位 ，（ I/O点控制） 旋转气缸旋回
/// </summary>
DB_H_02_BackHome= 20302,
DB_H_02_BackHome = 20302,
/// <summary>
/// 在线双层料仓：回原点：旋回完成
/// </summary>
......@@ -860,7 +872,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 轴报警
/// </summary>
AxisAlarm = 1,
AxisAlarm = 1,
/// <summary>
/// 收到急停
/// </summary>
......@@ -880,6 +892,57 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 电钢报警
/// </summary>
StellAlarm=50,
StellAlarm = 50,
}
//Charging 上料轴 入库运行状态
public enum ChargingInStatu
{
//Wait = 0,
/// <summary>
/// 初始化 ，原点返回状态中,只有流水线使用
/// </summary>
// HomeMoving = 1,
/// <summary>
/// 进料-上料轴--上移
/// </summary>
InBoxMoveUp = 1,
/// <summary>
/// 料盘检测步骤、扫码操作
/// </summary>
InBoxCheck = 2,
/// <summary>
/// 吸盘-下移动检测步骤
/// </summary>
SuckerMove_Down = 3,
/// <summary>
/// 吸盘-下端检测步骤
/// </summary>
Sucker_DownCheck = 4,
/// <summary>
/// 吸盘-停止下移步骤
/// </summary>
Sucker_DownStop = 5,
//吸盘吸
Sucker_SuctionSOL = 6,
////吸盘上升
Sucker_UpSOL = 7,
//进出轴出
//吸盘放掉料盘
//夹紧装置
//进出轴退回
//判断进出轴是否退回？
//上料轴运行
//上料轴位置判断
//挂起
}
public enum ChargingOutStatu
{
Wait = 0,
//开门出料
}
}
source/LoadCVSLibrary/storeConfig/config/AC_SA_Config.cs
......@@ -191,19 +191,19 @@ namespace OnlineStore.LoadCSVLibrary
#region
/// <summary>
/// PRO （轴四）进料轴轴原点低速度 ChargingAxis_HomeLowSpeed 50
/// PRO （轴五）进料轴轴原点低速度 ChargingAxis_HomeLowSpeed 50
/// </summary>
[ConfigProAttribute("ChargingAxis_HomeLowSpeed", false)]
public short ChargingAxis_HomeLowSpeed { get; set; }
/// <summary>
/// PRO （轴四）进料轴轴原点高速 ChargingnAxis_HomeHighSpeed 100
/// PRO （轴五）进料轴轴原点高速 ChargingnAxis_HomeHighSpeed 100
/// </summary>
[ConfigProAttribute("ChargingAxis_HomeHighSpeed", false)]
public short ChargingAxis_HomeHighSpeed { get; set; }
/// <summary>
/// PRO （轴四）进料轴轴原点加速度 ChargingAxis_HomeAddSpeed 30
/// PRO （轴五）进料轴轴原点加速度 ChargingAxis_HomeAddSpeed 30
/// </summary>
[ConfigProAttribute("ChargingAxis_HomeAddSpeed", false)]
public short ChargingAxis_HomeAddSpeed { get; set; }
......@@ -390,6 +390,16 @@ namespace OnlineStore.LoadCSVLibrary
/// </summary>
[ConfigProAttribute("CompressAxis_P1_Position")]
public int CompressAxis_P1_Position { get; set; }
// add by renym 2018-11-27 上料轴原点定义
/// PRO 进料轴（轴5）P1待机原位点 CompressAxis_P1_Position
/// </summary>
[ConfigProAttribute("ChargingAxis_P1_Position", false)]
public int ChargingAxis_P1_Position { get; set; }
/// PRO 进料轴（轴5）最高位点 CompressAxis_P1_Position
/// </summary>
[ConfigProAttribute("ChargingAxis_MaxHigh_Position", false)]
public int ChargingAxis_MaxHigh_Position { get; set; }
/// <summary>
/// PRO 是否使用料盘检测信号 IsUse_Tray_Check
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!