调试模式才需要模拟二维码

source/ACSingleStore/App.config

@@ -13,27 +13,26 @@
     <!--   停止吹气的判断值（配置值=服务器发送的湿度值-停止吹气值）-->
     <add key="StopBlowValue" value="4" />
     <!--Server address-->
-    <!--<add key="http.server" value="http://localhost:80/"/>-->
+    <add key="http.server" value="http://192.168.1.187/myproject/"/>
     <!--storeType-->
     <add key="store_count" value="1" />
     <!--start one store config-->
     <add key="Store_Position_Config" value="\StoreConfig\AC\linePositions.csv" />
     <add key="Store_ConfigPath" value="\StoreConfig\AC\StoreConfig.csv" />
     <add key="Store_Type" value="AUTO_SA_Config" />
-    <add key="Store_CID" value="nrAuto1" />
+    <add key="Store_CID" value="nanrui1" />
     <!--end one store config-->
-
     <!--摄像机名称列表配置，用#分割-->
     <add key="CameraName" value="GigE:MV-CE100-30GC (00C69898477)" />
     <!--二维码类型列表配置，用#分割-->
-    <add key="CodeType" value="Data Matrix ECC 200" />
+    <add key="CodeType" value="Data Matrix ECC 200#QR Code" />
     <!--<add key="CodeType" value="Data Matrix ECC 200"/>-->
     <!--二维码参数文件所在路径，文件名与二维码类型名一样-->
     <add key="CodeParamPath" value="\CodeParam\" />
-    <add key ="InOutDefaultPosition" value ="10000"/>
-    <add key ="Config_Pwd" value ="123456"/>
+    <add key="InOutDefaultPosition" value="10000" />
+    <add key="Config_Pwd" value="123456" />
     <!--5000脉冲对应1mm-->
-    <add key ="AxisChangeValue" value ="5000"/>
+    <add key="AxisChangeValue" value="5000" />
   </appSettings>
   <log4net>
     <appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender">

source/DeviceLibrary/StoreConfig/AC/StoreConfig.csv

@@ -46,8 +46,8 @@ AXIS,(轴五)批量上下料轴,Batch_Axis,1,COM6,0,,,,,
 ,,,,,,,,,,
 ,,,,,,,,,,
 PRO,升降轴  仓门位置P7(人工拿走盘的位置),UpDownAxis_Door_P7,355000,,,,,,,
-PRO,升降轴 出库高点P2,UpDownAxis_OutHigh_P2,355002,,,,,,,
-PRO,升降轴 出库低点P8,UpDownAxis_OutLow_P8,350008,,,,,,,
+PRO,升降轴 出库高点P2,UpDownAxis_OutHigh_P2,246000,,,,,,,
+PRO,升降轴 出库低点P8,UpDownAxis_OutLow_P8,240000,,,,,,,
 PRO,升降轴 入库P1点集合,UpDownAxis_P1_List,8#403400;12#350000;,,,,,,,
 PRO,旋转轴(轴一)P1 待机原位点,MiddleAxis_P1_Position,263200,,,,,,,
 PRO,进出轴(轴三)P1待机原位点,InOutAxis_P1_Position,1000,,,,,,,
@@ -55,7 +55,7 @@ PRO,压紧轴（轴4）P1待机原位点,CompressAxis_P1_Position,-10000,,,,,,,
 PRO,是否使用定位气缸,IsHasLocationCylinder,0,,,,,,,
 PRO,是否有左右侧门,IsHasDoorLimit,1,,,,,,,
 PRO,是否使用压紧轴（1=使用）,IsHasCompress_Axis,1,,,,, ,,
-PRO,设备是否调试状态（1=调试，0=正常）,IsInDebug,1,,,,,,,
+PRO,设备是否调试状态（1=调试，0=正常）,IsInDebug,0,,,,,,,
 PRO,气压检测IO关闭需要持续的时间,AirCheckSeconds,3,,,,,,,
 ,,,,,,,,,,
 PRO,预警温度,WarnTemperate,80,,,,,,,
@@ -132,7 +132,7 @@ PRO,(轴五)上料轴加速度,BatchAxis_AddSpeed,300,,,,,,,
 PRO,(轴五)上料轴减速度,BatchAxis_DelSpeed,300,,,,,,,
 PRO,(轴五)上料轴原点低速,BatchAxis_HomeLowSpeed,20,,,,,,,
 PRO,(轴五)上料轴原点高速,BatchAxis_HomeHighSpeed,60,,,,,,,
-PRO,(轴五)上料轴原点加速度,BatchAxis_HomeAddSpeed,200,,,,,,,
+PRO,(轴五)上料轴原点加速度,BatchAxis_HomeAddSpeed,300,,,,,,,
 PRO,(轴五)上料轴P1点（出库时接料盘的位置）,BatchAxis_P1,1500000,,,,,, ,
 PRO,(轴五)上料轴最小误差脉冲值,BatchAxis_ErrorCountMin,10,,,,,,,
 PRO,(轴五)上料轴最大误差脉冲值,BatchAxis_ErrorCountMax,1000,,,,,,,

source/DeviceLibrary/acSingleStore/AutomaticBaiting_Partial.cs

@@ -292,7 +292,7 @@ namespace OnlineStore.DeviceLibrary
                     //message = message + "=1+0x0-" + LastSize + "x" + LastHeight + " =" + str + spiltStr;
                 }
                 LastCode = message;
-                if (LastCode.Equals(""))
+                if (LastCode.Equals("")&&StoreManager.Store.IsDebug)
                 {
                     LastCode = "NoCode";
                     LogUtil.info(Name + "模拟二维码：NoCode");