Skip to content

孙克 / RC1250-ACPackingStore

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 37cc5182 由 LN
选项

出库shelfLoc问题修改。

1 个父辈 33ec4d36
内嵌 并排
正在显示 10 个修改的文件 包含 180 行增加 和 163 行删除
source/ACPackingStore/FrmBox.cs
......@@ -245,8 +245,7 @@ namespace OnlineStore.ACPackingStore
string selectPositionNum = cmbPosition.Text;
string sleShelfNum = cmbShelfPosition.Text;
LineMoveP ktk = LoadPostion();
InOutParam param = new InOutParam("", selectPositionNum,sleShelfNum, ktk);
InOutParam param = new InOutParam("", selectPositionNum,sleShelfNum, ktk);
BoxBean.StartOutStoreMove(param);
}
else
......
source/ACPackingStore/记录.txt
......@@ -86,6 +86,33 @@ agv客户端启动时需要设置状态为none。
20200303
httpPost方法增加验证，若ping不同则不再发送。
20200307
shelfLoc问题修改。
......
source/DeviceLibrary/ACPackingStore/AC_BOX_Bean.cs
......@@ -35,10 +35,10 @@ namespace OnlineStore.DeviceLibrary
/// 所有料架库位列表
/// </summary>
public List<string> ShelfPosList = new List<string>();
/// <summary>
/// 料架未放料盘的位置列表
/// </summary>
public ConcurrentQueue<string> EmprtShelfList = new ConcurrentQueue<string>();
///// <summary>
///// 料架未放料盘的位置列表
///// </summary>
// public ConcurrentQueue<string> EmprtShelfList = new ConcurrentQueue<string>();
public HumitureBean humBean = null;
private System.Timers.Timer serverConnectTimer = new System.Timers.Timer();
......@@ -624,16 +624,16 @@ namespace OnlineStore.DeviceLibrary
//判断急停
else if (storeRunStatus >= StoreRunStatus.HomeMoving)
{
//取新的Io状态
IO_VALUE suddenBtn = IOValue(IO_Type.SuddenStop_BTN);
IO_VALUE resetBtn = IOValue(IO_Type.Reset_BTN);
////取新的Io状态
//IO_VALUE suddenBtn = IOValue(IO_Type.SuddenStop_BTN);
//IO_VALUE resetBtn = IOValue(IO_Type.Reset_BTN);
//急停按钮
if (suddenBtn.Equals(IO_VALUE.LOW))
if (IOValue(IO_Type.SuddenStop_BTN).Equals(IO_VALUE.LOW))
{
AirCheckProcess();
return;
}
else if (resetBtn.Equals(IO_VALUE.HIGH))
else if (IOValue(IO_Type.Reset_BTN).Equals(IO_VALUE.HIGH))
{
//收到复位信号，若报警直接复位，若不报警且无操作，回到待机点
if (alarmType.Equals(StoreAlarmType.None) && isInSuddenDown.Equals(false) && isNoAirCheck.Equals(false))
......@@ -656,6 +656,7 @@ namespace OnlineStore.DeviceLibrary
Reset();
}
}
AirCheckProcess();
}
}
......@@ -750,7 +751,7 @@ namespace OnlineStore.DeviceLibrary
{
if (storeRunStatus < StoreRunStatus.Runing || MoveInfo.MoveType == StoreMoveType.InStore || MoveInfo.MoveType == StoreMoveType.OutStore)
{
LogInfo("已经累计出入库" + AutoInout.CurrInOutACount + "次，当时当前正在忙碌中暂不复位");
// LogInfo("已经累计出入库" + AutoInout.CurrInOutACount + "次，当时当前正在忙碌中暂不复位");
}
else
{
......
source/DeviceLibrary/ACPackingStore/AC_BOX_Bean_Partial.cs
......@@ -234,8 +234,8 @@ namespace OnlineStore.DeviceLibrary
LogUtil.error(Name + " 启动入库【" + param.ToStr() + "】出错，找不到库位信息");
return;
}
param.NeedEnterShelf = false;
param.NeedOutShelf = false;
//param.NeedEnterShelf = false;
//param.NeedOutShelf = false;
LogInfo(" 启动入库【" + param.ToStr() + "】，压紧点P2【" + param.MoveP.ComPress_P2 + "】压紧前点P3【" + param.MoveP.ComPress_P3 + "】");
storeRunStatus = StoreRunStatus.Busy;
storeStatus = StoreStatus.InStoreExecute;
......@@ -265,7 +265,7 @@ namespace OnlineStore.DeviceLibrary
storeRunStatus = StoreRunStatus.Busy;
storeStatus = StoreStatus.InStoreExecute;
EmprtShelfList = new ConcurrentQueue<string>();
// EmprtShelfList = new ConcurrentQueue<string>();
if (IOValue(IO_Type.LineIn_Check).Equals(IO_VALUE.HIGH))
{
MoveInfo.NewMove(StoreMoveType.InStore, new InOutParam());
......@@ -741,7 +741,7 @@ namespace OnlineStore.DeviceLibrary
return false;
}
if (WaitShelfEnter)
{
{
LogUtil.error(Name + " 启动出库【" + param.ToStr() + "】失败，WaitShelfEnter=true ，需要等待入库结束才能出库");
}
if (!StoreManager.LoadInoutParam(param, false, this))
......@@ -755,34 +755,11 @@ namespace OnlineStore.DeviceLibrary
storeRunStatus = StoreRunStatus.Busy;
MoveInfo.NewMove(StoreMoveType.OutStore, param);
LogInfo("启动出库【" + param.ToStr() + "】 ");
////判断当前料架是否正确
//if (MoveInfo.MoveParam.ShelfPosID.Equals(""))
//{
MoveInfo.NextMoveStep(StoreMoveStep.SO_01_DeviceBack);
InOutStoreLog("出库 " + MoveInfo.SLog + "：进出轴到P1 开始");
InOutBackToP1(MoveInfo.MoveParam.MoveP.InOut_P1);
//}
////当前无料架，或料架位置为空
//if ((IOValue(IO_Type.LineTake_Check).Equals(IO_VALUE.LOW) && MoveInfo.MoveParam.NeedEnterShelf) || MoveInfo.MoveParam.ShelfPosID.Equals(""))
//{
// MoveInfo.NextMoveStep(StoreMoveStep.BI_00_ReadyShelf);
// InOutStoreLog("出库 " + MoveInfo.SLog + "： 通知agv调度准备带料架的agv["+ param.rfid + "]，等待agv到达或检测到料架信号，进出轴到P1");
// InOutBackToP1(MoveInfo.MoveParam.MoveP.InOut_P1);
// //需要先叫agv到达
// AgvClient.SetStatus(Config.AgvNodeName,param.rfid, param.rfid, ClientAction.NeedEnter,ClientLevel.High,true);
// MoveInfo.WaitList.Add(WaitResultInfo.WaitAgvAction((int)ClientAction.Arrive));
//}
//else
//{
// MoveInfo.NextMoveStep(StoreMoveStep.SO_01_DeviceBack);
// InOutStoreLog("出库 " + MoveInfo.SLog + "：进出轴到P1 开始");
// InOutBackToP1(MoveInfo.MoveParam.MoveP.InOut_P1);
//}
return true;
//出库前shelfPosID需要固定，出库时根据rfid判断是否需要出入料架
MoveInfo.NextMoveStep(StoreMoveStep.SO_01_DeviceBack);
InOutStoreLog("出库 " + MoveInfo.SLog + "：进出轴到P1 开始");
InOutBackToP1(MoveInfo.MoveParam.MoveP.InOut_P1);
return true;
}
private void SO_03_ToBagPosition()
{
......@@ -930,7 +907,7 @@ namespace OnlineStore.DeviceLibrary
serverShelfData = null;
Task.Factory.StartNew(delegate
{
int posLoc = StoreManager.GetLocByShelfPosID(MoveInfo.MoveParam.ShelfPosID, ShelfPosList);
int posLoc = StoreManager.GetShelfPosIndex(MoveInfo.MoveParam.ShelfPosID, ShelfPosList);
//分盘料和紧急料发PutFinished
if (MoveInfo.MoveParam.cutReel || MoveInfo.MoveParam.urgentReel)
{
......@@ -944,15 +921,15 @@ namespace OnlineStore.DeviceLibrary
else
{
int newTaskCount = 0;
string msg = StoreManager.UpdateTrayLoc(Name, MoveInfo.MoveParam.WareCode, CurrShelfID + "@" + posLoc.ToString(),out newTaskCount);
string msg = StoreManager.UpdateTrayLoc(Name, MoveInfo.MoveParam.WareCode, CurrShelfID + "@" + posLoc.ToString(), out newTaskCount);
if (String.IsNullOrEmpty(msg).Equals(false))
{
LogUtil.error(Name + "【" + MoveInfo.MoveParam.WareCode + "】【" + CurrShelfID + "】【" + posLoc + "】UpdateTrayLoc 结果：" + msg);
serverShelfData = null;
}
if(newTaskCount> MoveInfo.MoveParam.taskCount)
if (newTaskCount > MoveInfo.MoveParam.taskCount)
{
InOutStoreLog("UpdateTrayLoc 返回 newTaskCount="+ newTaskCount+ ",原有 taskCount="+ MoveInfo.MoveParam.taskCount + "，使用新数据");
InOutStoreLog("UpdateTrayLoc 返回 newTaskCount=" + newTaskCount + ",原有 taskCount=" + MoveInfo.MoveParam.taskCount + "，使用新数据");
MoveInfo.MoveParam.taskCount = newTaskCount;
}
}
......@@ -978,16 +955,22 @@ namespace OnlineStore.DeviceLibrary
//判断是否需要送出料架
bool isNeedSend = false;
//包装料料仓料架=A
if (AutoInout.autoNext)
//if (AutoInout.autoNext)
//{
// InOutStoreLog("出库完成，自动出入库启动中，不需要送出料架");
// isNeedSend = false;
//}
//else if (EmprtShelfList.Count <= 0)
//{
// InOutStoreLog("出库完成，料架【" + CurrShelfID + "】没有剩余位置，送出料架");
// isNeedSend = true;
//}
//只有rfid不为空才需要送出料架
if (String.IsNullOrEmpty(MoveInfo.MoveParam.rfid))
{
InOutStoreLog("出库完成，自动出入库启动中，不需要送出料架");
InOutStoreLog("出库完成，未设置rfid，不需要送出料架");
isNeedSend = false;
}
else if (EmprtShelfList.Count <= 0)
{
InOutStoreLog("出库完成，料架【" + CurrShelfID + "】没有剩余位置，送出料架");
isNeedSend = true;
}
else if (serverShelfData != null)
{
if (serverShelfData.packageEmpty <= 0)
......
source/DeviceLibrary/ACPackingStore/AC_BOX_Bean_Shelf.cs
......@@ -52,14 +52,10 @@ namespace OnlineStore.DeviceLibrary
}
}
else if (MoveInfo.MoveStep.Equals(StoreMoveStep.BI_01_DoorOpen))
{
//}
//else if (MoveInfo.MoveStep.Equals(StoreMoveStep.BI_02_WaitReady))
//{
MoveInfo.NextMoveStep(StoreMoveStep.BI_03_LineRun);
{
MoveInfo.NextMoveStep(StoreMoveStep.BI_03_LineRun);
InOutStoreLog(moveName + MoveInfo.SLog + "调用AgvClient.MayEnter，线体正转，等待LineIn_Check信号");
AgvClient.SetStatus(Config.AgvNodeName,"","",ClientAction.MayEnter,ClientLevel.High,true);
AgvClient.SetStatus(Config.AgvNodeName, "", "", ClientAction.MayEnter, ClientLevel.High, true);
LineRun();
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.LineIn_Check, IO_VALUE.HIGH));
}
......@@ -72,35 +68,40 @@ namespace OnlineStore.DeviceLibrary
MoveInfo.NextMoveStep(StoreMoveStep.BI_05_LineStop);
InOutStoreLog(moveName + MoveInfo.SLog + "调用AgvClient.FinishEnter，取料位检测到信号，停止线体正转");
LineStop();
AgvClient.SetStatus(Config.AgvNodeName, "", "", ClientAction.FinishEnter, ClientLevel.High,true);
AgvClient.SetStatus(Config.AgvNodeName, "", "", ClientAction.FinishEnter, ClientLevel.High, true);
if (!instoreShelf)
{
EmprtShelfList = new System.Collections.Concurrent.ConcurrentQueue<string>(ShelfPosList);
if (MoveInfo.MoveParam.ShelfPosID.Equals(""))
{
string shelfPosId = "";
bool result = EmprtShelfList.TryDequeue(out shelfPosId);
if (result)
{
MoveInfo.MoveParam.UpdateShelfPosId(shelfPosId);
InOutStoreLog("出库 " + MoveInfo.SLog + "：重置EmprtShelfList列表，设置料架位置：" + MoveInfo.MoveParam.ShelfPosID);
}
else
{
waitOutStoreList.Enqueue(MoveInfo.MoveParam);
InOutStoreLog("出库 " + MoveInfo.SLog + "：重置EmprtShelfList列表，获取料架位置失败！结束出库，并将" + MoveInfo.MoveParam.ToStr() + "放入等待列表");
MoveEndToRuningStatus();
}
MoveInfo.MoveParam.UpdateShelfPosId(ShelfPosList[0]);
InOutStoreLog("出库 " + MoveInfo.SLog + "： ShelfPosID未设置，默认ShelfPosID=" + MoveInfo.MoveParam.ShelfPosID);
}
}
// EmprtShelfList = new System.Collections.Concurrent.ConcurrentQueue<string>(ShelfPosList);
//if (MoveInfo.MoveParam.ShelfPosID.Equals(""))
//{
// string shelfPosId = "";
// bool result = EmprtShelfList.TryDequeue(out shelfPosId);
// if (result)
// {
// MoveInfo.MoveParam.UpdateShelfPosId(shelfPosId);
// InOutStoreLog("出库 " + MoveInfo.SLog + "：重置EmprtShelfList列表，设置料架位置：" + MoveInfo.MoveParam.ShelfPosID);
// }
// else
// {
// waitOutStoreList.Enqueue(MoveInfo.MoveParam);
// InOutStoreLog("出库 " + MoveInfo.SLog + "：重置EmprtShelfList列表，获取料架位置失败！结束出库，并将" + MoveInfo.MoveParam.ToStr() + "放入等待列表");
// MoveEndToRuningStatus();
// }
//}
}
}
else if (MoveInfo.MoveStep.Equals(StoreMoveStep.BI_05_LineStop))
{
MoveInfo.NextMoveStep(StoreMoveStep.BI_06_DoorClose);
InOutStoreLog(moveName + MoveInfo.SLog + "入料口移门关闭 ");
InOutStoreLog(moveName + MoveInfo.SLog + "入料口移门关闭 ");
DoorBean.StartClose(MoveInfo);
if (!instoreShelf)
{
......@@ -249,7 +250,7 @@ namespace OnlineStore.DeviceLibrary
{
moveName = "送出出库料架";
}
LogCPU();
// LogCPU();
if (MoveInfo.MoveStep.Equals(StoreMoveStep.BS_01_TopDown))
{
MoveInfo.NextMoveStep(StoreMoveStep.BS_02_LocatinDown);
......@@ -282,7 +283,7 @@ namespace OnlineStore.DeviceLibrary
MoveInfo.NextMoveStep(StoreMoveStep.BS_06_LineBackRun);
//如果agv未到达，直接结束
MoveEndToRuningStatus();
EmprtShelfList = new ConcurrentQueue<string>();
//EmprtShelfList = new ConcurrentQueue<string>();
InOutStoreLog(moveName + MoveInfo.SLog + "：等待Agv " + Config.AgvNodeName + " Arrive超时，直接结束");
}
}
......@@ -343,7 +344,7 @@ namespace OnlineStore.DeviceLibrary
{
//结束
MoveEndToRuningStatus();
EmprtShelfList = new ConcurrentQueue<string>();
//EmprtShelfList = new ConcurrentQueue<string>();
InOutStoreLog(moveName + MoveInfo.SLog + "：停止转动，送出料架结束 ，设置状态为None，清空当前料架："+CurrShelfID);
CurrShelfID = "";
AgvClient.SetStatus(Config.AgvNodeName);
......@@ -493,7 +494,7 @@ namespace OnlineStore.DeviceLibrary
if (humBean.NeedGetTem())
{
lineOperation.op = 5;
LogInfo("没有湿度预警范围，需要从服务器获取，发送OP=" + lineOperation.op);
LogUtil.error(Name+ "没有湿度预警范围，需要从服务器获取，发送OP=" + lineOperation.op,DeviceID+105);
}
string server = ConfigAppSettings.GetValue(Setting_Init.http_server);
Operation resultOperation = HttpHelper.Post(StoreManager.GetPostApi(server), lineOperation, false);
......@@ -564,7 +565,9 @@ namespace OnlineStore.DeviceLibrary
index++;
string plateW = plateWArray[index];
string plateH = plateHArray[index];
InOutParam inoutParam = new InOutParam(barcode, posId, "", plateW, plateH, urgentReel, cutReel, smallReel, rfid, rfidLoc, taskCount, realRfid);
string shelfPosID = StoreManager.GetShelfIDByLoc(rfidLoc, ShelfPosList);
InOutParam inoutParam = new InOutParam(barcode, posId, shelfPosID, plateW, plateH, urgentReel, cutReel, smallReel, rfid, rfidLoc, taskCount, realRfid);
//根据发送的posId获取位置列表
ACBoxPosition position = CSVPositionReader<ACBoxPosition>.GetPositon(posId);
if (position == null)
......@@ -597,34 +600,34 @@ namespace OnlineStore.DeviceLibrary
{
LogUtil.error(Name + "验证出库【" + inoutParam.ToStr() + "】是否重复出错：" + ex.ToString());
}
//判断出库指定的料架是否是当前料架，如果不是当前料架，需要将当前料架送出，然后进入新料架
//TODO
string shelfPosID = "";
if (inoutParam.rfidLoc > 0 && ShelfPosList.Count >= inoutParam.rfidLoc)
{
shelfPosID = StoreManager.GetShelfIDByLoc(inoutParam.rfidLoc, ShelfPosList);
// shelfPosID = ShelfPosList[inoutParam.rfidLoc - 1];
inoutParam.NeedEnterShelf = false;
inoutParam.NeedOutShelf = false;
inoutParam.ShelfPosID = shelfPosID;
}
else
{
bool hasShelf = EmprtShelfList.TryDequeue(out shelfPosID);
if (hasShelf)
{
inoutParam.NeedEnterShelf = false;
inoutParam.NeedOutShelf = false;
inoutParam.ShelfPosID = shelfPosID;
}
else
{
inoutParam.NeedEnterShelf = true;
inoutParam.NeedOutShelf = false;
LogInfo(Name + "执行出库【" + inoutParam.ToStr() + "】,没有空料架，需要使用新料架");
}
}
// string shelfPosID = "";
//if (inoutParam.rfidLoc > 0 && ShelfPosList.Count >= inoutParam.rfidLoc)
//{
// shelfPosID = ShelfPosList[inoutParam.rfidLoc - 1];
//inoutParam.NeedEnterShelf = false;
//inoutParam.NeedOutShelf = false;
//}
//else
//{
// bool hasShelf = EmprtShelfList.TryDequeue(out shelfPosID);
// if (hasShelf)
// {
// inoutParam.NeedEnterShelf = false;
// inoutParam.NeedOutShelf = false;
// inoutParam.ShelfPosID = shelfPosID;
// }
// else
// {
// inoutParam.NeedEnterShelf = true;
// inoutParam.NeedOutShelf = false;
// LogInfo(Name + "执行出库【" + inoutParam.ToStr() + "】,没有空料架，需要使用新料架");
// }
//}
StartExecuctOut(inoutParam);
}
......
source/DeviceLibrary/ACPackingStore/StoreManager.cs
......@@ -346,7 +346,7 @@ namespace OnlineStore.DeviceLibrary
paramMap.Add("locInfo", locInfo); // locInfo = 位置信息,移栽时为移栽编号,流水线时为托盘号,皮带线时为皮带线编号,机器人时为机器人编号
string server = GetAddr(Addr_updateLocInfo, paramMap);
string resultStr = HttpHelper.Post(server, "");
LogUtil.info("UpdateTrayLoc 【" + server + "】【" + resultStr + "】");
LogUtil.info(deviceName+ " ["+locInfo+"] UpdateTrayLoc 【" + server + "】【" + resultStr + "】");
// 返回: { "code": 0, "msg":"ok", "data":""}
ServerData serverResult = JsonHelper.DeserializeJsonToObject<ServerData>(resultStr);
if (serverResult == null)
......@@ -403,46 +403,49 @@ namespace OnlineStore.DeviceLibrary
}
return msg;
}
public static int GetLocByShelfPosID(string shelfId, List<String> shelfPosList)
public static int GetShelfPosIndex(string shelfId, List<String> shelfPosList)
{
int loc = -1;
try
if (shelfPosList.Contains(shelfId))
{
loc = shelfPosList.IndexOf(shelfId) + 1;
}
else
{
if (shelfId.Length == 3)
try
{
loc = int.Parse(shelfId);
}
catch (Exception ex)
{
loc = int.Parse(shelfId.Substring(2, 1));
}
}
catch (Exception ex)
{
}
if (loc <= 0)
{
loc = shelfPosList.IndexOf(shelfId);
}
return loc;
}
internal static string GetShelfIDByLoc(int rfidLoc, List<string> shelfPosList)
{
string shelfId = "";
try
//try
//{
// foreach (string id in shelfPosList)
// {
// if (id.Length == 3 && id.Substring(2, 1).Equals(rfidLoc.ToString()))
// {
// shelfId = id;
// break;
// }
// }
//}
//catch (Exception ex)
//{
//}
if (rfidLoc.Equals(-1))
{
foreach (string id in shelfPosList)
{
if (id.Length == 3 && id.Substring(2, 1).Equals(rfidLoc.ToString()))
{
shelfId = id;
break;
}
}
}
catch (Exception ex)
{
shelfId = shelfPosList[0];
}
if (shelfId.Equals("") && rfidLoc > 0 && rfidLoc <= shelfPosList.Count)
if (rfidLoc >= 1 && rfidLoc <= 8 && rfidLoc <= shelfPosList.Count)
{
shelfId = shelfPosList[rfidLoc - 1];
}
......
source/DeviceLibrary/store/AutoInoutInfo.cs
......@@ -78,8 +78,8 @@ namespace OnlineStore.DeviceLibrary
string posid = boxBean.PositionNumList[positionIndex];
InOutParam param = new InOutParam("AAAA", posid, shelfPosId);
param.NeedOutShelf = false;
param.NeedEnterShelf = false;
//param.NeedOutShelf = false;
//param.NeedEnterShelf = false;
//判断是否需要重置
if (CurrInOutACount >= boxBean.Config.Box_ResetACount)
{
......@@ -117,7 +117,7 @@ namespace OnlineStore.DeviceLibrary
{
string posid = boxBean.PositionNumList[newIndex];
InOutParam param = new InOutParam("AAAA", posid, shelfPosId);
param.NeedOutShelf = false;
// param.NeedOutShelf = false;
//判断是否需要重置
if (CurrInOutACount >= boxBean.Config.Box_ResetACount)
{
......
source/DeviceLibrary/store/InOutParam.cs
......@@ -43,8 +43,8 @@ namespace OnlineStore.DeviceLibrary
this.ShelfPosID = ShelfPosID;
PosID = posId;
MoveP = linePosition;
NeedEnterShelf = false;
NeedOutShelf = false;
//NeedEnterShelf = false;
//NeedOutShelf = false;
this.urgentReel = false ;
this.cutReel = false ;
this.smallReel = false ;
......@@ -77,14 +77,14 @@ namespace OnlineStore.DeviceLibrary
public string PlateW { get; set; }
/// <summary>
/// 出入库时需要进入新料架
/// </summary>
public bool NeedEnterShelf = true;
/// <summary>
/// 出入库结束后需要将料架送出
/// </summary>
public bool NeedOutShelf = true;
///// <summary>
///// 出入库时需要进入新料架
///// </summary>
//public bool NeedEnterShelf = true;
///// <summary>
///// 出入库结束后需要将料架送出
///// </summary>
//public bool NeedOutShelf = true;
/// <summary>
/// urgentReel: true 表示紧急料,需要出到料串上
/// </summary>
......@@ -101,26 +101,26 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// rfid: 分配的料架RFID
/// </summary>
public string rfid { get; set; }
public string rfid = "";
/// <summary>
/// rfidLoc: 料架的架位,值为 - 1时,可以自由分配皮带线,
/// 小料时,架位为1 - 46优先走1 / 2号皮带线,47 - 92优先走3 / 4号皮带线,
/// 70,71,72时只能分配到3 / 4号皮带线;
/// 大料时,架位1 - 6优先走1 / 2号皮带线, 7 - 12优先走3/ 4号皮带线
/// </summary>
public int rfidLoc { get; set; }
public int rfidLoc = 0;
/// <summary>
/// 剩余任务数量，当剩余任务 《=1时，出库完成需要送出料架
/// 剩余任务数为0, 或者料架已放满,或者料架rfid与上一个任务不同,料架就要放出去
/// 剩余任务数为1时, 当前的料放完就可以把料架放出去了
///当前料放完,料架已满,也把料架放出去
/// </summary>
public int taskCount { get; set; }
public int taskCount = 0;
/// <summary>
/// 真实料架号
/// </summary>
public string realRfid { get; set; }
public string realRfid = "";
/// <summary>
/// 根据PosId获取对应的料仓ID，若PosId=="",返回-1
/// </summary>
......@@ -155,13 +155,13 @@ namespace OnlineStore.DeviceLibrary
}
public string ToStr()
{
return " 料架号[" + ShelfPosID + "],库位号 [" + PosID + "], [" + WareCode + "], [" + PlateW + "x" + PlateH + "]" +
"NeedEnterShelf【" + NeedEnterShelf + "】NeedOutShelf【" + NeedOutShelf + "】"+
return " 库位 [" + PosID + "] [" + ShelfPosID + "], [" + WareCode + "], [" + PlateW + "x" + PlateH + "] ," +
// "NeedEnterShelf【" + NeedEnterShelf + "】NeedOutShelf【" + NeedOutShelf + "】"+
"urgentReel [" + urgentReel + "],cutReel [" + cutReel + "],smallReel [" + smallReel + "],rfid [" + rfid + "],rfidLoc [" + rfidLoc + "],taskCount ["+ taskCount + "]";
}
public string ToShortStr()
{
return " [" + ShelfPosID + "] [" + PosID + "] [" + WareCode + "], [" + PlateW + "x" + PlateH + "]";
return " [" + PosID + "] [" + ShelfPosID + "] [" + WareCode + "], [" + PlateW + "x" + PlateH + "]";
}
internal void UpdateShelfPosId(string pId)
......
source/DeviceLibrary/store/KTK_Store.cs
......@@ -483,7 +483,7 @@ namespace OnlineStore.DeviceLibrary
protected void InOutStoreLog(string msg)
{
string posId = MoveInfo.MoveParam != null ? MoveInfo.MoveParam.PosID : "";
string shelfId = MoveInfo.MoveParam != null ? "_" + MoveInfo.MoveParam.ShelfPosID : "_";
string shelfId = MoveInfo.MoveParam != null ? "" + MoveInfo.MoveParam.ShelfPosID : "_";
LogInfo(" [" + posId +"] ["+ shelfId + "] :" + msg);
}
protected int GetAlarmCodeByAxis(ConfigMoveAxis axis)
......
source/DeviceLibrary/store/model/StoreMoveInfo.cs
using OnlineStore.Common;
using Asa;
using OnlineStore.Common;
using OnlineStore.DeviceLibrary;
using OnlineStore.LoadCSVLibrary;
using System;
......@@ -326,7 +327,7 @@ namespace OnlineStore.DeviceLibrary
return "扫码完成";
}else if (WaitType.Equals(WaitEnum.W010_AgvStatus))
{
return "Agv状态：" + AgvAction;
return "Agv状态：" + (ClientAction)AgvAction;
}else if (WaitType.Equals(WaitEnum.W011_DoorCloseEvent))
{
return "Agv状态：DoorClose" ;
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!