1

source/ACSquareStore/App.config

@@ -30,13 +30,9 @@
     <!--温控器类型，0=壁挂王字壳温湿度变送器，1=妙昕温湿度记录仪-->
     <add key="HumitureControllerType" value="0" />
     <add key="UseAIOBOX" value="1" />
-    <!--流水线地址和端口配置-->
-    <add key="LineServerIp" value="192.168.8.108" />
-    <add key="LineServerPort" value="5246" />
+ 
     <!--是否调试状态-->
-    <add key="IsInDebug" value="1" />
-    <add key="ClientSettingsProvider.ServiceUri" value="" />
-    <add key ="UseDoor" value ="1"/>
+    <add key="IsInDebug" value="1" /> 
   </appSettings>
   <log4net>
     <appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender">

source/Common/Setting_Init.cs

@@ -55,14 +55,7 @@ namespace OnlineStore.Common
         /// </summary>
         public static string StopBlowValue = "StopBlowValue";
 
-        /// <summary>
-        /// 配置文件路径  Data Matrix ECC 200.dcm
-        /// </summary>
-        public static string CodeParamPath = "CodeParamPath";
-        /// <summary>
-        /// 高度传感器转换系数
-        /// </summary>
-        public static string AI_ConvertPosition = "AI_ConvertPosition";
+       
         /// <summary>
         /// 进出轴最大待机点，需要小于3000
         /// </summary>
@@ -81,9 +74,7 @@ namespace OnlineStore.Common
         public static string HumitureControllerType = "HumitureControllerType";
 
         public static string UseAIOBOX = "UseAIOBOX";
-
-        public static string LineServerIp = "LineServerIp";
-        public static string LineServerPort = "LineServerPort";
+ 
         /// <summary>
         /// 是否调试状态
         /// </summary>
@@ -98,8 +89,7 @@ namespace OnlineStore.Common
         public static string Tool_P6_Offset = "Tool_P6_Offset";
 
         public static string Tool_TargetSpeed= "Tool_TargetSpeed";
-        public static string Tool_TargetPosition= "Tool_TargetPosition";
-        public static string UseDoor = "UseDoor";
+        public static string Tool_TargetPosition= "Tool_TargetPosition"; 
 
     }
 }

source/DeviceLibrary/StoreConfig/StoreConfig.csv

@@ -72,14 +72,14 @@ PRO,( X轴-进出轴）原点低速,InoutAxis_HomeLowSpeed,20,,,,,,,
 PRO,( X轴-进出轴）原点高速,InoutAxis_HomeHighSpeed,60,,,,,,,
 PRO,( X轴-进出轴）原点加速度,InoutAxis_HomeAddSpeed,200,,,,,,, 
 ,,,,,,,,,,
-PRO,（Y轴-前后轴）P1速度,UpDownAxis_P1_Speed,1000,,,,,,,
-PRO,（Y轴-前后轴）P2速度,UpDownAxis_P2_Speed,600,,,,,,,
-PRO,（Y轴-前后轴）P3速度,UpDownAxis_P3_Speed,1000,,,,,,,
-PRO,（Y轴-前后轴）P4速度,UpDownAxis_P4_Speed,600,,,,,,,
-PRO,（Y轴-前后轴）P5速度,UpDownAxis_P5_Speed,1000,,,,,,,
-PRO,（Y轴-前后轴）P6速度,UpDownAxis_P6_Speed,600,,,,,,,
-PRO,（Y轴-前后轴）P7速度,UpDownAxis_P7_Speed,600,,,,,, ,
-PRO,（Y轴-前后轴）P8速度,UpDownAxis_P8_Speed,600,,,,,,,
+PRO,（Z轴-升降轴）P1速度,UpDownAxis_P1_Speed,1000,,,,,,,
+PRO,（Z轴-升降轴）P2速度,UpDownAxis_P2_Speed,600,,,,,,,
+PRO,（Z轴-升降轴）P3速度,UpDownAxis_P3_Speed,1000,,,,,,,
+PRO,（Z轴-升降轴）P4速度,UpDownAxis_P4_Speed,600,,,,,,,
+PRO,（Z轴-升降轴）P5速度,UpDownAxis_P5_Speed,1000,,,,,,,
+PRO,（Z轴-升降轴）P6速度,UpDownAxis_P6_Speed,600,,,,,,,
+PRO,（Z轴-升降轴）P7速度,UpDownAxis_P7_Speed,600,,,,,, ,
+PRO,（Z轴-升降轴）P8速度,UpDownAxis_P8_Speed,600,,,,,,,
 PRO,（Y轴-前后轴）P1速度,MiddleAxis_P1_Speed,500,,,,,,,
 PRO,（Y轴-前后轴）P2速度,MiddleAxis_P2_Speed,500,,,,,,,
 PRO,（X轴-进出轴）P1速度,InOutAxis_P1_Speed,600,,,,,,,