Skip to content

孙克 / ACSingleStore

转到一个项目
切换导航栏
切换导航栏固定状态
Commit be188147 由 LN
选项

最新代码提交

1 个父辈 f427b7b6
全部展开
内嵌 并排
正在显示 30 个修改的文件 包含 469 行增加 和 304 行删除
dll/CodeLibrary.dll
此文件类型无法预览
source/ACServoDriveTest/FrmACTest.cs
......@@ -126,7 +126,7 @@ namespace ACServoDriveTest
{
//bean.closePort();
ACServerManager.ServoOff(GetPortName(), GetSlaveAddr());
ACServerManager.ColsePort(GetPortName() );
// ACServerManager.ColsePort(GetPortName() );
formStatus(false);
}
private void Form1_Load(object sender, EventArgs e)
......
source/ACSingleStore/ACSingleStore.csproj
......@@ -9,7 +9,7 @@
<AppDesignerFolder>Properties</AppDesignerFolder>
<RootNamespace>OnlineStore.ACSingleStore</RootNamespace>
<AssemblyName>ZHACSingleStore</AssemblyName>
<TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
<TargetFrameworkVersion>v4.6.1</TargetFrameworkVersion>
<FileAlignment>512</FileAlignment>
<TargetFrameworkProfile />
</PropertyGroup>
......@@ -92,6 +92,12 @@
<DependentUpon>FrmStoreBox.cs</DependentUpon>
</Compile>
<Compile Include="ManagerUtil.cs" />
<Compile Include="positionTool\FrmPositionTool.cs">
<SubType>Form</SubType>
</Compile>
<Compile Include="positionTool\FrmPositionTool.Designer.cs">
<DependentUpon>FrmPositionTool.cs</DependentUpon>
</Compile>
<Compile Include="Program.cs" />
<Compile Include="Properties\AssemblyInfo.cs" />
<EmbeddedResource Include="FrmAxisDebug.resx">
......@@ -109,6 +115,9 @@
<EmbeddedResource Include="FrmStoreBox.resx">
<DependentUpon>FrmStoreBox.cs</DependentUpon>
</EmbeddedResource>
<EmbeddedResource Include="positionTool\FrmPositionTool.resx">
<DependentUpon>FrmPositionTool.cs</DependentUpon>
</EmbeddedResource>
<EmbeddedResource Include="Properties\Resources.resx">
<Generator>ResXFileCodeGenerator</Generator>
<LastGenOutput>Resources.Designer.cs</LastGenOutput>
......@@ -128,79 +137,6 @@
<DependentUpon>Settings.settings</DependentUpon>
<DesignTimeSharedInput>True</DesignTimeSharedInput>
</Compile>
<None Include="Skins\back\DeepCyan.ssk" />
<None Include="Skins\back\DeepGreen.ssk" />
<None Include="Skins\back\DeepOrange.ssk" />
<None Include="Skins\Calmness.ssk" />
<None Include="Skins\CalmnessColor1.ssk" />
<None Include="Skins\CalmnessColor2.ssk" />
<None Include="Skins\DiamondBlue.ssk" />
<None Include="Skins\DiamondGreen.ssk" />
<None Include="Skins\DiamondOlive.ssk" />
<None Include="Skins\DiamondPurple.ssk" />
<None Include="Skins\DiamondRed.ssk" />
<None Include="Skins\Eighteen.ssk" />
<None Include="Skins\EighteenColor1.ssk" />
<None Include="Skins\EighteenColor2.ssk" />
<None Include="Skins\Emerald.ssk" />
<None Include="Skins\EmeraldColor1.ssk" />
<None Include="Skins\EmeraldColor2.ssk" />
<None Include="Skins\EmeraldColor3.ssk" />
<None Include="Skins\GlassBrown.ssk" />
<None Include="Skins\GlassGreen.ssk" />
<None Include="Skins\GlassOrange.ssk" />
<None Include="Skins\Longhorn.ssk" />
<None Include="Skins\MacOS.ssk" />
<None Include="Skins\Midsummer.ssk" />
<None Include="Skins\MidsummerColor1.ssk" />
<None Include="Skins\MidsummerColor2.ssk" />
<None Include="Skins\MidsummerColor3.ssk" />
<None Include="Skins\mp10.ssk" />
<None Include="Skins\mp10green.ssk" />
<None Include="Skins\mp10maroon.ssk" />
<None Include="Skins\mp10mulberry.ssk" />
<None Include="Skins\mp10pink.ssk" />
<None Include="Skins\mp10purple.ssk" />
<None Include="Skins\MSN.ssk" />
<None Include="Skins\office2007.ssk" />
<None Include="Skins\OneBlue.ssk" />
<None Include="Skins\OneCyan.ssk" />
<None Include="Skins\OneGreen.ssk" />
<None Include="Skins\OneOrange.ssk" />
<None Include="Skins\Page.ssk" />
<None Include="Skins\PageColor1.ssk" />
<None Include="Skins\PageColor2.ssk" />
<None Include="Skins\RealOne.ssk" />
<None Include="Skins\Silver.ssk" />
<None Include="Skins\SilverColor1.ssk" />
<None Include="Skins\SilverColor2.ssk" />
<None Include="Skins\SportsBlack.ssk" />
<None Include="Skins\SportsBlue.ssk" />
<None Include="Skins\SportsCyan.ssk" />
<None Include="Skins\SportsGreen.ssk" />
<None Include="Skins\SportsOrange.ssk" />
<None Include="Skins\SteelBlack.ssk" />
<None Include="Skins\SteelBlue.ssk" />
<None Include="Skins\vista1.ssk" />
<None Include="Skins\vista1_green.ssk" />
<None Include="Skins\Vista2_color1.ssk" />
<None Include="Skins\Vista2_color2.ssk" />
<None Include="Skins\Vista2_color3.ssk" />
<None Include="Skins\Vista2_color4.ssk" />
<None Include="Skins\Vista2_color5.ssk" />
<None Include="Skins\Vista2_color6.ssk" />
<None Include="Skins\Vista2_color7.ssk" />
<None Include="Skins\Warm.ssk" />
<None Include="Skins\WarmColor1.ssk" />
<None Include="Skins\WarmColor2.ssk" />
<None Include="Skins\WarmColor3.ssk" />
<None Include="Skins\Wave.ssk" />
<None Include="Skins\WaveColor1.ssk" />
<None Include="Skins\WaveColor2.ssk" />
<None Include="Skins\XPBlue.ssk" />
<None Include="Skins\XPGreen.ssk" />
<None Include="Skins\XPOrange.ssk" />
<None Include="Skins\XPSilver.ssk" />
</ItemGroup>
<ItemGroup>
<None Include="App.config">
......
source/ACSingleStore/App.config
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" />
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net"/>
</configSections>
<appSettings>
<!--是否开机自动启动料仓-->
<add key="App_AutoRun" value="1" />
<add key="App_Title" value="AC_SA_料仓_1" />
<add key="scanner_start_command" value="S" />
<add key="App_AutoRun" value="1"/>
<add key="App_Title" value="AC_SA_料仓_1"/>
<add key="scanner_start_command" value="S"/>
<!-- 开始吹气的判断值（配置值=服务器发送的湿度值-开始吹气值）-->
<add key="StartBlowValue" value="4" />
<add key="StartBlowValue" value="4"/>
<!-- 停止吹气的判断值（配置值=服务器发送的湿度值-停止吹气值）-->
<add key="StopBlowValue" value="4" />
<add key="StopBlowValue" value="4"/>
<!--Server address-->
<!--<add key="http.server" value="http://localhost:80/"/>-->
<!--storeType-->
<add key="store_count" value="1" />
<add key="store_count" value="1"/>
<!--start one store config-->
<add key="Store_Position_Config" value="\StoreConfig\AC\linePositions.csv" />
<add key="Store_ConfigPath" value="\StoreConfig\AC\StoreConfig.csv" />
<add key="Store_Type" value="RC_AC_SA" />
<add key="Store_CID" value="zhac1" />
<add key="Store_Position_Config" value="\StoreConfig\AC\linePositions.csv"/>
<add key="Store_ConfigPath" value="\StoreConfig\AC\StoreConfig.csv"/>
<add key="Store_Type" value="RC_AC_SA"/>
<add key="Store_CID" value="zhac1"/>
<!--end one store config-->
<!--摄像机名称列表配置，用#分割-->
<add key="CameraName" value="GigE:MV-CE100-30GC (00C69898484)" />
<add key="CameraName" value="GigE:MV-CE100-30GC (00C69898484)"/>
<!--二维码类型列表配置，用#分割，一维码=Barcode。-->
<add key="CodeType" value="Barcode" />
<add key="CodeType" value="Barcode"/>
<!--<add key="CodeType" value="Data Matrix ECC 200"/>-->
<!--二维码参数文件所在路径，文件名与二维码类型名一样-->
<add key="CodeParamPath" value="\CodeParam\" />
<add key ="AI_ConvertPosition" value ="55"/>
<add key ="InOutDefaultPosition" value ="8000"/>
<add key ="Config_Pwd" value ="123456"/>
<add key="CodeParamPath" value="\CodeParam\"/>
<add key="AI_ConvertPosition" value="55"/>
<add key="InOutDefaultPosition" value="8000"/>
<add key="Config_Pwd" value="123456"/>
<!--出库等待料盘拿走的时间，秒-->
<add key ="OutStoreWaitSeconds" value ="600"/>
<add key="OutStoreWaitSeconds" value="600"/>
<!--压紧轴对应4mm的脉冲-->
<add key="ComAxisChangeValue" value="2400" />
<add key="ComAxisChangeValue" value="2400"/>
<!--伺服波特率-->
<add key="ACBaudRate" value="115200"/>
</appSettings>
<log4net>
<appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender">
<file value="logs/ZHACStore1.log" />
<appendToFile value="true" />
<rollingStyle value="Date" />
<datePattern value="yyyy-MM-dd" />
<file value="logs/ZHACStore1.log"/>
<appendToFile value="true"/>
<rollingStyle value="Date"/>
<datePattern value="yyyy-MM-dd"/>
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="[%date][%t]%-5p %m%n" />
<conversionPattern value="[%date][%t]%-5p %m%n"/>
</layout>
</appender>
<root>
<level value="Info" />
<appender-ref ref="RollingLogFileAppender" />
<level value="Info"/>
<appender-ref ref="RollingLogFileAppender"/>
</root>
</log4net>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0" />
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1"/>
</startup>
<!-- 部署服务库项目时，必须将配置文件的内容添加到
主机的 app.config 文件中。System.Configuration 不支持库的配置文件。 -->
......@@ -63,14 +65,14 @@
<service name="AcStoreWCF.CWSMDBox">
<endpoint address="" binding="basicHttpBinding" contract="AcStoreWCF.ICWSMDBox">
<identity>
<dns value="localhost" />
<dns value="localhost"/>
</identity>
</endpoint>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
<host>
<baseAddresses>
<add baseAddress="http://localhost:8733/Design_Time_Addresses/AcStoreWCF/CWSMDBox/" />
<add baseAddress="http://localhost:8733/Design_Time_Addresses/AcStoreWCF/CWSMDBox/"/>
</baseAddresses>
</host>
</service>
......@@ -80,13 +82,13 @@
<behavior>
<!-- 为避免泄漏元数据信息，
请在部署前将以下值设置为 false -->
<serviceMetadata httpGetEnabled="True" httpsGetEnabled="True" />
<serviceMetadata httpGetEnabled="True" httpsGetEnabled="True"/>
<!-- 要接收故障异常详细信息以进行调试，
请将以下值设置为 true。在部署前设置为 false
以避免泄漏异常信息 -->
<serviceDebug includeExceptionDetailInFaults="False" />
<serviceDebug includeExceptionDetailInFaults="False"/>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
</configuration>
\ No newline at end of file
</configuration>
source/ACSingleStore/FrmAxisDebug.cs
......@@ -23,17 +23,19 @@ namespace OnlineStore.ACSingleStore
private ConfigMoveAxis updown = null;
//private ConfigMoveAxis compress = null;
private ConfigMoveAxis inout = null;
private int compress_Slv = 0;
private ConfigMoveAxis comp = null;
//private int compress_Slv = 0;
public static readonly ILog LOGGER = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
public FrmAxisDebug(AC_SA_BoxBean boxBean)
{
middle = boxBean.Config.Middle_Axis;
updown = boxBean.Config.UpDown_Axis;
compress_Slv = boxBean.Config.CompressAxis_Slv;
//compress_Slv = boxBean.Config.CompressAxis_Slv;
comp = boxBean.Config.Comp_Axis;
inout = boxBean.Config.InOut_Axis;
InitializeComponent();
txtComSpeed.Text = boxBean.Config.CompressAxis_EndSpeed.ToString();
this.Text = boxBean.StoreName + "_轴点动调试";
}
......@@ -44,11 +46,11 @@ namespace OnlineStore.ACSingleStore
}
private void FrmAxisDebug_Load(object sender, EventArgs e)
{
{
txtMiddleSpeed.Text = (middle.TargetSpeed / 5).ToString();
txtInOutSpeed.Text = (inout.TargetSpeed / 5).ToString();
txtUpDownSpeed.Text = (updown.TargetSpeed / 5).ToString();
txtComSpeed.Text = (StoreManager.Config.CompressAxis_EndSpeed/5).ToString();
txtComSpeed.Text = (comp.TargetSpeed/5).ToString();
timer1.Start();
}
/// <summary>
......@@ -246,28 +248,26 @@ namespace OnlineStore.ACSingleStore
}
private void btnComMove_MouseDown(object sender, MouseEventArgs e)
{
int speed = FormUtil.GetIntValue(txtComSpeed);
if (speed <= 0)
if (btnComMove.BackColor.Equals(System.Drawing.SystemColors.Control))
{
MessageBox.Show("提示", "请先输入正确的速度");
return;
int speed = FormUtil.GetIntValue(txtComSpeed);
if (speed <= 0)
{
MessageBox.Show("提示", "请先输入正确的速度");
return;
}
this.btnComMove.BackColor = Color.Green;
AxisMove(comp, speed);
}
this.btnComMove.BackColor = Color.Green;
ShuoKeControls.SetSpeed(compress_Slv, ShuoKeCMD.SetEndSpeed, speed);
ShuoKeControls.SetSpeed(compress_Slv, ShuoKeCMD.SetMaxSpeed, speed);
ShuoKeControls.VolMove(compress_Slv, speed);
}
private void btnComMove_MouseUp(object sender, MouseEventArgs e)
{
if (this.btnComMove.BackColor == Color.Green)
{
btnComMove.BackColor = System.Drawing.SystemColors.Control;
ShuoKeControls.SuddownStop(compress_Slv);
// ShuoKeControls.GetABSPosition(compress_Slv);
txtComPosition.Text = ShuoKeControls.GetABSPosition(compress_Slv).ToString();
btnComMove.BackColor = System.Drawing.SystemColors.Control;
ACServerManager.SuddenStop(comp.DeviceName, comp.GetAxisValue());
UpdateCompPosition();
}
}
private void btnComMovej_MouseDown(object sender, MouseEventArgs e)
......@@ -279,19 +279,16 @@ namespace OnlineStore.ACSingleStore
return;
}
this.btnComMovej.BackColor = Color.Green;
ShuoKeControls.SetSpeed(compress_Slv, ShuoKeCMD.SetEndSpeed, speed);
ShuoKeControls.SetSpeed(compress_Slv, ShuoKeCMD.SetMaxSpeed, speed);
ShuoKeControls.VolMove(compress_Slv,-speed);
AxisMove(comp, -speed);
}
private void btnComMovej_MouseUp(object sender, MouseEventArgs e)
{
if (btnComMovej.BackColor.Equals(Color.Green))
{
btnComMovej.BackColor = System.Drawing.SystemColors.Control;
ShuoKeControls.SuddownStop(compress_Slv);
// ShuoKeControls.GetABSPosition(compress_Slv);
txtComPosition.Text = ShuoKeControls.GetABSPosition(compress_Slv).ToString();
btnComMovej.BackColor = System.Drawing.SystemColors.Control;
ACServerManager.SuddenStop(comp.DeviceName,comp.GetAxisValue());
UpdateCompPosition();
}
}
......@@ -302,8 +299,7 @@ namespace OnlineStore.ACSingleStore
private void FrmAxisDebug_Shown(object sender, EventArgs e)
{
SetSkin(this);
{
}
private void timer1_Tick(object sender, EventArgs e)
......@@ -313,22 +309,18 @@ namespace OnlineStore.ACSingleStore
UpdateMiddlePosition();
UpdateInOutPosition();
UpdateUpdownPosition();
txtComPosition.Text = ShuoKeControls.GetABSPosition(compress_Slv).ToString();
//ShuoKeInfo info = ShuoKeControls.GetLastPosition(compress_Slv);
//if (info != null)
//{
// txtComPosition.Text = info.LastPosition.ToString();
// TimeSpan span = DateTime.Now - info.UpdateTime;
// if (span.TotalSeconds > 1.5)
// {
// ShuoKeControls.GetABSPosition(compress_Slv);
// }
//}
UpdateCompPosition();
// txtComPosition.Text = ShuoKeControls.GetLastPosition(compress_Slv).ToString();
}
}
private void UpdateCompPosition()
{
int compPosition = ACServerManager.GetTargetPosition(comp.DeviceName, comp.GetAxisValue());
if (!txtComPosition.Text.Equals(compPosition.ToString()))
{
txtComPosition.Text = compPosition.ToString();
}
}
private void UpdateUpdownPosition()
{
int updownPosition = ACServerManager.GetTargetPosition(updown.DeviceName, updown.GetAxisValue());
......@@ -355,5 +347,35 @@ namespace OnlineStore.ACSingleStore
txtInOutPosition.Text = inoutPosition.ToString();
}
}
private void trackBar1_ValueChanged(object sender, EventArgs e)
{
int value = trackBar1.Value;
lblSpeed.Text = "点动速度=" + (value / 10f) + "倍目标速度";
txtMiddleSpeed.Text = (middle.TargetSpeed * value / 10).ToString();
txtInOutSpeed.Text = (inout.TargetSpeed * value / 10).ToString();
txtUpDownSpeed.Text = (updown.TargetSpeed * value / 10).ToString();
txtComSpeed.Text = (comp.TargetSpeed * value / 10).ToString();
}
private void btnMCopy_Click(object sender, EventArgs e)
{
Clipboard.SetDataObject(txtMiddlePosition.Text, true);
}
private void btnUCopy_Click(object sender, EventArgs e)
{
Clipboard.SetDataObject(txtUpdownPosition.Text, true);
}
private void btnICopy_Click(object sender, EventArgs e)
{
Clipboard.SetDataObject(txtInOutPosition.Text, true);
}
private void btnCCopy_Click(object sender, EventArgs e)
{
Clipboard.SetDataObject(txtComPosition.Text, true);
}
}
}
source/ACSingleStore/Properties/Resources.Designer.cs
......@@ -47,7 +47,7 @@ namespace OnlineStore.ACSingleStore.Properties {
}
/// <summary>
/// 使用此强类型资源类，为所有资源查找
/// 重写当前线程的 CurrentUICulture 属性
/// 重写当前线程的 CurrentUICulture 属性。
/// </summary>
[global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
......
source/ACSingleStore/Properties/Settings.Designer.cs
......@@ -12,7 +12,7 @@ namespace OnlineStore.ACSingleStore.Properties {
[global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
[global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.6.0.0")]
[global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.9.0.0")]
internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
......
source/ACSingleStore/positionTool/FrmPositionTool.resx 0 → 100644
<?xml version="1.0" encoding="utf-8"?>
<root>
<!--
Microsoft ResX Schema
Version 2.0
The primary goals of this format is to allow a simple XML format
that is mostly human readable. The generation and parsing of the
various data types are done through the TypeConverter classes
associated with the data types.
Example:
... ado.net/XML headers & schema ...
<resheader name="resmimetype">text/microsoft-resx</resheader>
<resheader name="version">2.0</resheader>
<resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
<resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
<data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
<data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
<data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
<value>[base64 mime encoded serialized .NET Framework object]</value>
</data>
<data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
<value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
<comment>This is a comment</comment>
</data>
There are any number of "resheader" rows that contain simple
name/value pairs.
Each data row contains a name, and value. The row also contains a
type or mimetype. Type corresponds to a .NET class that support
text/value conversion through the TypeConverter architecture.
Classes that don't support this are serialized and stored with the
mimetype set.
The mimetype is used for serialized objects, and tells the
ResXResourceReader how to depersist the object. This is currently not
extensible. For a given mimetype the value must be set accordingly:
Note - application/x-microsoft.net.object.binary.base64 is the format
that the ResXResourceWriter will generate, however the reader can
read any of the formats listed below.
mimetype: application/x-microsoft.net.object.binary.base64
value : The object must be serialized with
: System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
: and then encoded with base64 encoding.
mimetype: application/x-microsoft.net.object.soap.base64
value : The object must be serialized with
: System.Runtime.Serialization.Formatters.Soap.SoapFormatter
: and then encoded with base64 encoding.
mimetype: application/x-microsoft.net.object.bytearray.base64
value : The object must be serialized into a byte array
: using a System.ComponentModel.TypeConverter
: and then encoded with base64 encoding.
-->
<xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
<xsd:element name="root" msdata:IsDataSet="true">
<xsd:complexType>
<xsd:choice maxOccurs="unbounded">
<xsd:element name="metadata">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" />
</xsd:sequence>
<xsd:attribute name="name" use="required" type="xsd:string" />
<xsd:attribute name="type" type="xsd:string" />
<xsd:attribute name="mimetype" type="xsd:string" />
<xsd:attribute ref="xml:space" />
</xsd:complexType>
</xsd:element>
<xsd:element name="assembly">
<xsd:complexType>
<xsd:attribute name="alias" type="xsd:string" />
<xsd:attribute name="name" type="xsd:string" />
</xsd:complexType>
</xsd:element>
<xsd:element name="data">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
<xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
</xsd:sequence>
<xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
<xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
<xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
<xsd:attribute ref="xml:space" />
</xsd:complexType>
</xsd:element>
<xsd:element name="resheader">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
</xsd:sequence>
<xsd:attribute name="name" type="xsd:string" use="required" />
</xsd:complexType>
</xsd:element>
</xsd:choice>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<resheader name="resmimetype">
<value>text/microsoft-resx</value>
</resheader>
<resheader name="version">
<value>2.0</value>
</resheader>
<resheader name="reader">
<value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
</resheader>
<resheader name="writer">
<value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
</resheader>
<metadata name="timer1.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
<value>17, 17</value>
</metadata>
</root>
\ No newline at end of file
source/ACSingleStore/记录.txt
......@@ -86,4 +86,54 @@ bug修改：压紧轴点动时实时坐标更新。
20190830：
增加压紧轴复位的配置。
StoreConfig.csv增加：
PRO,出入库多少次自动复位压紧轴,Box_ResetCCount,3,,,,,,,
\ No newline at end of file
PRO,出入库多少次自动复位压紧轴,Box_ResetCCount,3,,,,,,,
20191210修改：
压紧轴改为伺服控制：
1.以前的三个轴波特率为9600，压紧轴的波特率需要一致.
2.所有压紧轴相关的位置都要重新配置，压紧轴回原点是向上的，位置都是正整数。
配置修改：
StoreConfig.csv删除原来的步进电机配置：
PRO,硕科步进电机（压紧轴）控制端口号,CompressAxis_PortName,COM3,,,,,,,
PRO,硕科步进电机（压紧轴）控制波特率,CompressAxis_PortBaudrate,9600,,,,,,,
PRO,硕科步进电机（压紧轴）控制奇偶校验,CompressAxis_PortParity,0,,,,,,,
PRO,硕科步进电机（压紧轴）控制停止位,CompressAxis_StopBits,1,,,,,,,
PRO,硕科步进电机（压紧轴）控制初速度,CompressAxis_StartSpeed,5000,,,,,,,
PRO,硕科步进电机（压紧轴）控制最大速度,CompressAxis_MaxSpeed,8000,,,,,,,
PRO,硕科步进电机（压紧轴）控制末速度,CompressAxis_EndSpeed,6000,,,,,,,
PRO,硕科步进电机（压紧轴）控制加速度,CompressAxis_AddSpeed,3000,,,,,,,
PRO,硕科步进电机（压紧轴）控制减速度,CompressAxis_DelSpeed,3000,,,,,,,
PRO,硕科步进电机（压紧轴）控制归零速度（原点返回速度）,CompressAxis_HomeSpeed,5000,,,,,,,
PRO,硕科步进电机轴地址（压紧轴),CompressAxis_Slv,1,,,,,,,
增加压紧轴配置：
,,,,,,,,, ,
AXIS,（轴四）压紧轴,Comp_Axis,4,COM1,0,,,,,
PRO,（轴四）压紧轴目标速度,CompAxis_TargetSpeed,100,,,,,,,
PRO,（轴四）压紧轴加速度,CompAxis_AddSpeed,300,,,,,,,
PRO,（轴四）压紧轴减速度,CompAxis_DelSpeed,300,,,,,,,
PRO,（轴四）压紧轴原点低速,CompAxis_HomeLowSpeed,20,,,,,,,
PRO,（轴四）压紧轴原点高速,CompAxis_HomeHighSpeed,60,,,,,,,
PRO,（轴四）压紧轴原点加速度,CompAxis_HomeAddSpeed,200,,,,,,,
PRO,压紧轴（轴4）P1速度,CompAxis_P1_Speed,100,,,,,,,
PRO,压紧轴（轴4）P2速度,CompAxis_P2_Speed,100,,,,,,,
PRO,压紧轴（轴4）P3速度,CompAxis_P3_Speed,100,,,,,,,
,,,,,,,
20200301
增加升降轴调试功能
20200305
进出轴回待机点时，原点信号必须亮。
20200311
扫码更新为最新版本。
source/Common/Setting_Init.cs
......@@ -79,5 +79,15 @@ namespace OnlineStore.Common
/// 压紧轴1mm对应的脉冲
/// </summary>
public static string ComAxisChangeValue = "ComAxisChangeValue";
public static string ACBaudRate = "ACBaudRate";
public static string Tool_P3_Offset = "Tool_P3_Offset";
public static string Tool_P4_Offset = "Tool_P4_Offset";
public static string Tool_P5_Offset = "Tool_P5_Offset";
public static string Tool_P6_Offset = "Tool_P6_Offset";
public static string Tool_TargetSpeed = "Tool_TargetSpeed";
public static string Tool_TargetPosition = "Tool_TargetPosition";
}
}
source/Common/util/AcSerialBean.cs
......@@ -12,7 +12,7 @@ namespace OnlineStore.Common
public class AcSerialBean
{
#region 全部变量
public static readonly ILog LOGGER = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
public static readonly ILog LOGGER = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
private SerialPort _serialPort = null;
private object lockObj = new object();
......@@ -24,7 +24,7 @@ namespace OnlineStore.Common
//public event SerialErrorReceivedEventHandler Error;
//接收事件是否有效 false表示有效
//public bool ReceiveEventFlag = false;
#endregion
#region 获取串口名
......@@ -52,7 +52,7 @@ namespace OnlineStore.Common
}
}
#endregion
#region 默认构造函数
///// <summary>
///// 默认构造函数，操作COM1，速度为9600，没有奇偶校验，8位字节，停止位为1 "COM1", 9600, Parity.None, 8, StopBits.One
......@@ -62,7 +62,7 @@ namespace OnlineStore.Common
// _serialPort = new SerialPort();
//}
#endregion
#region 构造函数
///// <summary>
///// 构造函数,
......@@ -81,7 +81,7 @@ namespace OnlineStore.Common
// setSerialPort();
//}
#endregion
#region 构造函数,可以自定义串口的初始化参数
/// <summary>
/// 构造函数,可以自定义串口的初始化参数
......@@ -99,7 +99,7 @@ namespace OnlineStore.Common
setSerialPort();
}
#endregion
#region 析构函数
/// <summary>
/// 析构函数，关闭串口
......@@ -110,7 +110,7 @@ namespace OnlineStore.Common
_serialPort.Close();
}
#endregion
#region 设置串口参数
/// <summary>
/// 设置串口参数
......@@ -148,7 +148,7 @@ namespace OnlineStore.Common
//设置触发DataReceived事件的字节数为1
_serialPort.ReceivedBytesThreshold = 1;
//接收到一个字节时，也会触发DataReceived事件
// _serialPort.DataReceived += new SerialDataReceivedEventHandler(_serialPort_DataReceived);
// _serialPort.DataReceived += new SerialDataReceivedEventHandler(_serialPort_DataReceived);
//接收数据出错,触发事件
_serialPort.ErrorReceived += new SerialErrorReceivedEventHandler(_serialPort_ErrorReceived);
//打开串口
......@@ -183,7 +183,7 @@ namespace OnlineStore.Common
return ok;
}
#endregion
#region 关闭串口
/// <summary>
/// 关闭串口资源,操作完成后,一定要关闭串口
......@@ -211,8 +211,8 @@ namespace OnlineStore.Common
}
#endregion
#region 接收数据出错事件
/// <summary>
/// 接收数据出错事件
......@@ -271,7 +271,7 @@ namespace OnlineStore.Common
// LogUtil.error(LOGGER, "SendData ERROR:" + ex.ToString(), 21);
// }
// }
//}
#endregion
#region 发送命令
......@@ -282,13 +282,13 @@ namespace OnlineStore.Common
/// <param name="ReceiveData">接收数据</param>
/// <param name="Overtime">超时时间</param>
/// <returns></returns>
public int SendCommand(byte[] SendData, ref byte[] ReceiveData, int Overtime,out bool isOk)
public int SendCommand(byte[] SendData, ref byte[] ReceiveData, int Overtime, out bool isOk)
{
isOk = false;
if (_serialPort.IsOpen)
{
//lock (lockObj)
if(Monitor.TryEnter(lockObj,10))
if (Monitor.TryEnter(lockObj, Overtime + 50))
{
//Monitor.Enter(lockObj);
try
......@@ -326,7 +326,7 @@ namespace OnlineStore.Common
LogUtil.error(LOGGER, "SendCommand ERROR:" + ex.ToString(), 20);
}
finally
{
{
Monitor.Exit(lockObj);
}
}
......@@ -339,7 +339,7 @@ namespace OnlineStore.Common
return -1;
}
private byte PreSlvAddr = 0;
/// <summary>
/// 发送命令
/// </summary>
......@@ -348,21 +348,32 @@ namespace OnlineStore.Common
/// <param name="Overtime">超时时间</param>
/// <param name="ReceiveLength">接收数据长度</param>
/// <returns></returns>
public int SendCommand(byte[] SendData, ref byte[] ReceiveData, int Overtime, int ReceiveLength)
public int SendCommand(byte[] SendData, ref byte[] ReceiveData, int Overtime, int ReceiveLength)
{
if (_serialPort == null)
{
LogUtil.error(PortName+" 发送数据"+ByteToString(SendData)+ "失败，_serialPort=null");
LogUtil.error(PortName + " 发送数据" + ByteToString(SendData) + "失败，_serialPort=null");
return -1;
}
if (_serialPort.IsOpen)
{
if (Monitor.TryEnter(lockObj, 1))
if (Monitor.TryEnter(lockObj, Overtime + 80))
{
//Monitor.Enter(lockObj);
try
{
//判断是否需要休眠
if (SendData != null && SendData.Length > 0)
{
if (!SendData[0].Equals(PreSlvAddr))
{
Thread.Sleep(50);
PreSlvAddr = SendData[0];
}
}
_serialPort.DiscardInBuffer(); //清空接收缓冲区
_serialPort.Write(SendData, 0, SendData.Length);
int num = 0, ret = 0;
......@@ -370,15 +381,15 @@ namespace OnlineStore.Common
if (ReceiveData == null)
{
ReceiveData = new byte[ReceiveLength];
}
}
while (num++ < Overtime)
{
{
if (_serialPort.BytesToRead >= ReceiveData.Length)
break;
System.Threading.Thread.Sleep(1);
}
if (num >= Overtime)
{
{
LogUtil.error(PortName + " 发送数据" + ByteToString(SendData) + "等待接受数据超时");
}
if (_serialPort.BytesToRead >= ReceiveData.Length)
......@@ -390,12 +401,12 @@ namespace OnlineStore.Common
{
ret = _serialPort.Read(ReceiveData, 0, _serialPort.BytesToRead);
}
return ret;
}
catch (Exception ex)
{
LogUtil.error(PortName + " 发送数据" + ByteToString(SendData) + " 出错："+ex.ToString());
LogUtil.error(PortName + " 发送数据" + ByteToString(SendData) + " 出错：" + ex.ToString());
}
finally
{
......@@ -410,8 +421,8 @@ namespace OnlineStore.Common
}
return -1;
}
#endregion
#region 获取串口
......@@ -457,7 +468,7 @@ namespace OnlineStore.Common
#endregion
#region 十六进制字符串转字节型
/// <summary>
/// 打包方法，可以将十六制字符串转成byte[] ，字符串没有空格
/// </summary>
......@@ -493,7 +504,7 @@ namespace OnlineStore.Common
return putout;
}
#endregion
#region 字节型转十六进制字符串
/// <summary>
/// 字节数组转16进制字符串
......@@ -557,4 +568,4 @@ namespace OnlineStore.Common
#endregion
}
}
}
source/DeviceLibrary/DeviceLibrary.csproj
......@@ -9,7 +9,7 @@
<AppDesignerFolder>Properties</AppDesignerFolder>
<RootNamespace>OnlineStore.DeviceLibrary</RootNamespace>
<AssemblyName>DeviceLibrary</AssemblyName>
<TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
<TargetFrameworkVersion>v4.6.1</TargetFrameworkVersion>
<FileAlignment>512</FileAlignment>
<TargetFrameworkProfile />
</PropertyGroup>
......@@ -67,8 +67,6 @@
<Compile Include="PanasonicServo\ACCMDManager.cs" />
<Compile Include="PanasonicServo\ACServerManager.cs" />
<Compile Include="PanasonicServo\ACServerManager_Partial.cs" />
<Compile Include="ShuoKe\MeteringSignalBean.cs" />
<Compile Include="ShuoKe\ShuoKeController.cs" />
<Compile Include="store\LineMoveP.cs" />
<Compile Include="store\LineAlarm.cs">
<SubType>Code</SubType>
......
source/DeviceLibrary/KangNaiDe/KNDAIManager.cs
......@@ -128,6 +128,11 @@ namespace OnlineStore.DeviceLibrary
try
{
isProcess = true;
if (StoreManager.Store == null)
{
isProcess = false;
return;
}
bool IsNeedReadAI = StoreManager.Store.KNDIOValue(IO_Type.TrayCheck_Door).Equals(IO_VALUE.HIGH);
IsNeedReadAI = (IsNeedReadAI || NeedReadAI);
TimeSpan span = DateTime.Now - PreCheckTime;
......
source/DeviceLibrary/KangNaiDe/KNDManager.cs
......@@ -21,71 +21,70 @@ namespace OnlineStore.DeviceLibrary
public static ushort DoStartAddress = 100;
public static ushort DefualtLength = 16;
private static byte DefualtSlaveID = 255;
public static readonly ILog LOGGER = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
public static Dictionary<string, MasterTcpClient> mastMap = new Dictionary<string, MasterTcpClient>();
public static Dictionary<string, List<KNDIO>> DIValueMap = new Dictionary<string, List<KNDIO>>();
public static Dictionary<string, List<KNDIO>> DOValueMap = new Dictionary<string, List<KNDIO>>();
private static readonly ILog LOGGER = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
private static Dictionary<string, MasterTcpClient> mastMap = new Dictionary<string, MasterTcpClient>();
private static Dictionary<string, List<KNDIO>> DIValueMap = new Dictionary<string, List<KNDIO>>();
private static Dictionary<string, List<KNDIO>> DOValueMap = new Dictionary<string, List<KNDIO>>();
private static object DIMapLock = "";
private static object DOMapLock = "";
public static System.Timers.Timer timer = null;
private static System.Timers.Timer timer = null;
private static bool isWrite=false;
public static void ConnectionIP(string ioIp, ushort port)
{
if (timer == null)
{
timer = new System.Timers.Timer();
timer.Interval = 300;
timer.AutoReset = true;
timer.Elapsed += timer_Elapsed;
timer.Enabled = true;
}
MasterTcpClient MBmaster = null;
if (mastMap.ContainsKey(ioIp))
{
MBmaster = mastMap[ioIp];
if (null != MBmaster)
{
MBmaster.disconnect();
MBmaster.Dispose();
MBmaster = null;
//lock (DIMapLock)
//{
// if (DIValueMap.ContainsKey(ioIp))
// {
// DIValueMap.Remove(ioIp);
// }
//}
private static void ConnectionIP(string ioIp, ushort port)
{
lock (DOMapLock)
{
if (DOValueMap.ContainsKey(ioIp))
{
DOValueMap.Remove(ioIp);
}
}
}
mastMap.Remove(ioIp);
}
try
{
// Create new modbus master and add event functions
MBmaster = new MasterTcpClient(ioIp, port);
MBmaster.OnResponseData += new MasterTcpClient.ResponseData(MBmaster_OnResponseData);
MBmaster.OnException += new MasterTcpClient.ExceptionData(MBmaster_OnException);
MBmaster.autoConnectOfBreak = false;
mastMap.Add(ioIp, MBmaster);
MasterTcpClient MBmaster = null;
if (mastMap.ContainsKey(ioIp))
{
MBmaster = mastMap[ioIp];
Thread.Sleep(10);
LogUtil.info("连接IO模块[" + ioIp + "]成功");
//读取所有的DO
ReadMultipleDO(ioIp, DefualtSlaveID, DoStartAddress, DefualtLength);
}
catch (Exception error)
{
LogUtil.error(LOGGER,"连接IO模块[" + ioIp + "]出错："+error.ToString());
}
}
if (null != MBmaster)
{
MBmaster.disconnect();
MBmaster.Dispose();
MBmaster = null;
//lock (DIMapLock)
//{
// if (DIValueMap.ContainsKey(ioIp))
// {
// DIValueMap.Remove(ioIp);
// }
//}
lock (DOMapLock)
{
if (DOValueMap.ContainsKey(ioIp))
{
DOValueMap.Remove(ioIp);
}
}
}
mastMap.Remove(ioIp);
}
try
{
// Create new modbus master and add event functions
MBmaster = new MasterTcpClient(ioIp, port);
MBmaster.OnResponseData += new MasterTcpClient.ResponseData(MBmaster_OnResponseData);
MBmaster.OnException += new MasterTcpClient.ExceptionData(MBmaster_OnException);
MBmaster.autoConnectOfBreak = false;
mastMap.Add(ioIp, MBmaster);
Thread.Sleep(10);
if (MBmaster.connected)
{
LogUtil.info("连接IO模块[" + ioIp + "]成功");
MBmaster.ReadCoils(1, DoStartAddress, DefualtLength, DefualtSlaveID);
}
else
{
LogUtil.info("连接IO模块[" + ioIp + "]失败，等待重连");
}
}
catch (Exception error)
{
LogUtil.error(LOGGER, "连接IO模块[" + ioIp + "]出错：" + error.ToString());
}
}
/// <summary>
/// 判断Io模块是否连接
/// </summary>
......@@ -130,7 +129,7 @@ namespace OnlineStore.DeviceLibrary
}
catch (Exception ex)
{
LogUtil.error(LOGGER, "出错啦："+ex.ToString());
LogUtil.error(LOGGER, "出错啦："+ex.StackTrace);
}
Thread.Sleep(1);
}
......@@ -142,14 +141,22 @@ namespace OnlineStore.DeviceLibrary
foreach (string ip in DIONameList)
{
ConnectionIP(ip, port);
}
}
public static void ConnectionKND(string ip)
{
//端口号暂时使用固定的502；
ushort port = 502;
ConnectionIP(ip, port);
}
}
if (timer == null)
{
timer = new System.Timers.Timer();
timer.Interval = 1000;
timer.AutoReset = true;
timer.Elapsed += timer_Elapsed;
timer.Enabled = true;
}
}
//public static void ConnectionKND(string ip)
//{
// //端口号暂时使用固定的502；
// ushort port = 502;
// ConnectionIP(ip, port);
//}
public static void ReadMultipleDI(string ioIp, byte slaveId, ushort StartAddress, ushort length)
{
isWrite = true;
......@@ -187,9 +194,15 @@ namespace OnlineStore.DeviceLibrary
{
isWrite = true;
foreach (string key in mastMap.Keys)
{
byte[] data = new byte[] { 0,0};
WriteMultipleDO(key, DefualtSlaveID, DoStartAddress, DefualtLength, data);
{
try
{
byte[] data = new byte[] { 0, 0 };
WriteMultipleDO(key, DefualtSlaveID, DoStartAddress, DefualtLength, data);
}catch (Exception ex)
{
LogUtil.error("CloseAllDO出错：" + ex.ToString());
}
}
isWrite = false;
}
......
source/DeviceLibrary/PanasonicServo/ACCMDManager.cs
......@@ -10,9 +10,17 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 0132h 原点接近传感器输入 (HOME) 状态 ReadOnly 0： 输入 OFF 1： 输入 ON
/// </summary>
public static string Home_Single = "0132";
// 0022h 负方向驱动禁止输入(NOT) ReadOnly 0： 输入 OFF、 1： 输入 ON
// 0023h 正方向驱动禁止输入(POT) ReadOnly 0： 输入 OFF、 1： 输入 ON
public static string Home_Single = "0132";
/// <summary>
/// 0022h 负方向驱动禁止输入(NOT) ReadOnly 0： 输入 OFF、 1： 输入 ON
/// </summary>
public static string Limit_Negative_Single = "0022";
/// <summary>
/// 0023h 正方向驱动禁止输入(POT) ReadOnly 0： 输入 OFF、 1： 输入 ON
/// </summary>
public static string Limit_Positive_Single = "0023";
/// <summary>
///速度 4601
/// </summary>
......@@ -320,6 +328,7 @@ namespace OnlineStore.DeviceLibrary
//sendData[4] = dataByte[1];
//sendData[5] = dataByte[0];
}
sendData = buildCheckData(sendData, sendData.Length - 2);
......
source/DeviceLibrary/StoreConfig/AC/StoreConfig.csv
......@@ -32,8 +32,8 @@ DO,相机照明开,CameraLight_Power,110,192.168.200.11,0,相机照明开,Y11,DO-11,0,
DO,允许放料信号,CanPutTray,114,192.168.200.11,0,允许放料信号,Y15,DO-15,0,
DO,可取料信号,CanGetTray,115,192.168.200.11,0,可取料信号,Y16,DO-16,0,
AXIS,（轴一）旋转轴,Middle_Axis,1,COM6,0,,,,,
AXIS,（轴二）升降轴轴,UpDown_Axis,1,COM5,0,,,,,
AXIS,（轴三）进出轴,InOut_Axis,1,COM4,0,,,,,
AXIS,（轴二）升降轴轴,UpDown_Axis,2,COM6,0,,,,,
AXIS,（轴三）进出轴,InOut_Axis,3,COM6,0,,,,,
,温湿度传感器地址,Temperate_ServerAddress,192.168.200.34,,,,,,,
,扫码枪IP,Scanner_Ip,192.168.200.33,,,,,,,
,扫码枪端口号,Scanner_Port,51236,,,,,,,
......@@ -43,7 +43,7 @@ PRO,升降轴 进料口取料缓冲点 P7,UpDownAxis_DoorOBPosition_P7,415000,,,,,,,
PRO,升降轴 进料口出料缓冲点 P8,UpDownAxis_DoorIBPosition_P8,403000,,,,,,,
PRO,旋转轴（轴1）P1 待机原位点,MiddleAxis_P1_Position,268093,,,,,,,
PRO,进出轴（轴3）P1待机原位点,InOutAxis_P1_Position,1000,,,,,,,
PRO,压紧轴（轴4）P1待机原位点,CompressAxis_P1_Position,-7500,,,,,,,
PRO,压紧轴（轴4）P1待机原位点,CompressAxis_P1_Position,10000,,,,,,,
PRO,是否使用定位气缸,IsHasLocationCylinder,0,,,,,,,
PRO,是否有左右侧门,IsHasDoorLimit,1,,,,,,,
PRO,是否使用压紧轴（1=使用）,IsHasCompress_Axis,1,,,,, ,,
......@@ -70,6 +70,7 @@ PRO,（轴三）进出轴减速度,InoutAxis_DelSpeed,300,,,,,,,
PRO,（轴三）进出轴原点低速,InoutAxis_HomeLowSpeed,20,,,,,,,
PRO,（轴三）进出轴原点高速,InoutAxis_HomeHighSpeed,60,,,,,,,
PRO,（轴三）进出轴原点加速度,InoutAxis_HomeAddSpeed,200,,,,,,,
PRO,升降轴（轴2）P1速度,UpDownAxis_P1_Speed,250,,,,,,,
PRO,升降轴（轴2）P2速度,UpDownAxis_P2_Speed,250,,,,,,,
PRO,升降轴（轴2）P3速度,UpDownAxis_P3_Speed,250,,,,,,,
......@@ -106,18 +107,6 @@ PRO,每次吹气的时间（分钟）,BlowAir_Time,10,,,,,,,
PRO,两次吹气间隔（分钟）,BlowAir_Interval,10,,,,,,,
PRO,温湿度端口号,Humiture_Port,COM1,,,,,,,
,,,,,,,,, ,
PRO,硕科步进电机（压紧轴）控制端口号,CompressAxis_PortName,COM3,,,,,,,
PRO,硕科步进电机（压紧轴）控制波特率,CompressAxis_PortBaudrate,9600,,,,,,,
PRO,硕科步进电机（压紧轴）控制奇偶校验,CompressAxis_PortParity,0,,,,,,,
PRO,硕科步进电机（压紧轴）控制停止位,CompressAxis_StopBits,1,,,,,,,
PRO,硕科步进电机（压紧轴）控制初速度,CompressAxis_StartSpeed,5000,,,,,,,
PRO,硕科步进电机（压紧轴）控制最大速度,CompressAxis_MaxSpeed,8000,,,,,,,
PRO,硕科步进电机（压紧轴）控制末速度,CompressAxis_EndSpeed,6000,,,,,,,
PRO,硕科步进电机（压紧轴）控制加速度,CompressAxis_AddSpeed,3000,,,,,,,
PRO,硕科步进电机（压紧轴）控制减速度,CompressAxis_DelSpeed,3000,,,,,,,
PRO,硕科步进电机（压紧轴）控制归零速度（原点返回速度）,CompressAxis_HomeSpeed,5000,,,,,,,
PRO,硕科步进电机轴地址（压紧轴),CompressAxis_Slv,1,,,,,,,
,,,,,,,,, ,
PRO,模拟量IO模块的IP地址,AIDevice_IP,192.168.200.12,,,,,,,
PRO,模拟信号1默认高度,AIDI1_DefaultPosition,2920,,,,,,,
PRO,模拟信号2默认高度,AIDI2_DefaultPosition,2960,,,,,,,
......@@ -125,3 +114,15 @@ PRO,模拟信号3默认高度,AIDI3_DefaultPosition,2500,,,,,,,
,,,,,,,,, ,
PRO,模拟信号1的地址,AIDI1_Addr,7,,,,,,,
PRO,模拟信号2的地址,AIDI2_Addr,8,,,,,,,
,,,,,,,,, ,
AXIS,（轴四）压紧轴,Comp_Axis,4,COM6,0,,,,,
PRO,（轴四）压紧轴目标速度,CompAxis_TargetSpeed,100,,,,,,,
PRO,（轴四）压紧轴加速度,CompAxis_AddSpeed,300,,,,,,,
PRO,（轴四）压紧轴减速度,CompAxis_DelSpeed,300,,,,,,,
PRO,（轴四）压紧轴原点低速,CompAxis_HomeLowSpeed,20,,,,,,,
PRO,（轴四）压紧轴原点高速,CompAxis_HomeHighSpeed,60,,,,,,,
PRO,（轴四）压紧轴原点加速度,CompAxis_HomeAddSpeed,200,,,,,,,
PRO,压紧轴（轴4）P1速度,CompAxis_P1_Speed,100,,,,,,,
PRO,压紧轴（轴4）P2速度,CompAxis_P2_Speed,100,,,,,,,
PRO,压紧轴（轴4）P3速度,CompAxis_P3_Speed,100,,,,,,,
,,,,,,,
source/DeviceLibrary/acSingleStore/StoreManager.cs
......@@ -29,24 +29,6 @@ namespace OnlineStore.DeviceLibrary
public StoreManager()
{
}
public static bool OpenShuoKe(AC_SA_BoxBean box)
{
//打开硕科步进驱动器端口
Parity parity = (Parity)box.Config.CompressAxis_PortParity;
StopBits bit = (StopBits)box.Config.CompressAxis_StopBits;
bool result = ShuoKeControls.InitPort(box.Config.CompressAxis_PortName, box.Config.CompressAxis_PortBaudrate,
box.Config.CompressAxis_PortParity, 8, bit);
if (result)
{
LogUtil.info(box.StoreName + "打开硕科步进控制器【" + box.Config.CompressAxis_PortName + "】成功");
return true;
}
else
{
LogUtil.error(box.StoreName + "打开硕科步进控制器【" + box.Config.CompressAxis_PortName + "】失败，启动失败！");
return false;
}
}
public static void CheckEnum(Type type)
{
if (type.IsEnum)
......
source/DeviceLibrary/store/KTK_Store.cs
......@@ -254,7 +254,7 @@ namespace OnlineStore.DeviceLibrary
//如果是进出轴，并且光栅被遮挡，直接返回false
if (NeedCheckSafetyLight.Equals(2))
{
if (StoreMove.MoveStep.Equals(StoreMoveStep.SO_10_DeviceToDoor) ||
if (StoreMove.MoveStep.Equals(StoreMoveStep.SO_13_DeviceToDoor) ||
StoreMove.MoveStep.Equals(StoreMoveStep.SI_05_DeviceToDoor))
{
return false;
......
source/DeviceLibrary/store/StoreStep.cs
......@@ -259,36 +259,39 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 料仓出库，定位气缸退回（有压紧轴的不需要此步骤），，定位气缸退回(Y104-1/PCI5O1-84) (Y104-2/PCI5O1-91) (Y104-2/PCI5O1-96) 退回到位
/// </summary>
SO_09_LocationCylinder_Down = 109,
SO_09_LocationDown = 109,
/// <summary>
/// 等待门口无料盘
/// </summary>
SO_091_WaitNoTray=115,
SO_11_WaitNoTray,
/// <summary>
/// 等待门口无料盘
/// </summary>
SO_12_OpenDoor,
/// <summary>
/// 料仓出库，，叉子进出料口，，轴3（ 叉子） 至P2（ 进料口取料点）
/// /// </summary>
SO_10_DeviceToDoor = 110,
SO_13_DeviceToDoor,
/// <summary>
/// 料仓出库，，把物品放下，，轴2（ 上下） 至P8（ 进料口出料缓冲点）轴4（ 压紧） 至P1（ 待机点)
/// </summary>
SO_11_DevicePutWare = 111,
SO_14_DevicePutWare,
/// <summary>
/// 料仓出库，，叉子从出料口返回，，轴3（ 叉子） 动作至P1（ 待机点）
/// </summary>
SO_12_DeviceOutFromDoor = 112,
SO_15_InoutBack,
/// <summary>
/// 需要检测到门口有料盘高度
/// </summary>
SO_121_CheckHasTray=116,
SO_16_CheckHasTray,
/// <summary>
/// 料仓出库，，升降轴返回，， 轴2至P1（ 待机点）
/// </summary>
SO_13_GoBack = 113,
SO_17_GoBack,
/// <summary>
/// 等待拿走物品
/// </summary>
SO_14_WaitTake=114,
SO_18_WaitTake,
#endregion
......@@ -296,7 +299,7 @@ namespace OnlineStore.DeviceLibrary
/// <summary>
/// 入库检测
/// </summary>
SI_00_TrayCheck=200,
SI_00_TrayCheck =200,
/// <summary>
/// 入库，。定位气缸下降
/// </summary>
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!