startFail 启动失败:急停未开 Startup failure: emergency stop not opened
WaitSingleTimeOut 等待信号{0}={1}超时 Wait signal {0}={1} timeout
startFailAir 启动失败:没有气压信号 Startup failure: no air pressure signal
AxisHomeMoveAlarm 运动{0}轴{1}收到原点完成信号，当前位置[{2}]，误差过大，需要报警 Motion {0} axis {1} receives the origin completion signal& the current position [{2}], the error is too large, it needs to alarm
AxisMoveAlarm 运动{0}轴{1}目标位置[{2}]当前位置{3}误差过大，需要报警 Motion {0} axis {1} target position [{2}] current position {3} error is too large& need to alarm
MoveTimeOut {0}]超时{1}[{2}] {0}]Time out{1}[{2}]
WaitInstoreTimeOut [{0}]超时[等待可以入库][{1}秒] [{0}]Timeout [wait to store][{1} seconds]
HasWare 叉子料盘检测有料，请检查 Fork full, please check
NoCodeMsg 未扫到二维码，请重新放入料盘 QR code not scanned, please put back the reel
InStoreNoCode 未扫到二维码，需要将料盘送出 QR code not scanned, the reel will be returned
startFail 启动失败:急停未开 Startup failure: emergency stop not opened
WaitSingleTimeOut 等待信号{0}={1}超时 Wait signal {0}={1} timeout
startFailAir 启动失败:没有气压信号 Startup failure: no air pressure signal
AxisHomeMoveAlarm 运动{0}轴{1}收到原点完成信号，当前位置[{2}]，误差过大，需要报警 The movement {0} axis {1} receives the origin completion signal& the current position [{2}]& the error is too large& it needs to alarm
AxisMoveAlarm 运动{0}轴{1}目标位置[{2}]当前位置{3}误差过大，需要报警 Movement {0} axis {1} target position [{2}] current position {3} error is too large& need to alarm
MoveTimeOut {0}]超时{1}[{2}] {0}]Time out {1}
WaitInstoreTimeOut [{0}]超时[等待可以入库][{1}秒] [{0}] timeout [wait to store]
HasWare 叉子料盘检测有料，请检查 Fork tray full& please check
NoCodeMsg 未扫到二维码，请重新放入料盘 If the qr code is not scanned& please put it back into the material tray
InStoreNoCode 未扫到二维码，需要将料盘送出 The qr code is not scanned& the material plate needs to be sent out
InStoreError 入库库位格式错误:条码[{0}]库位号[{1}] Incorrect format of the library entry: barcode [{0}] library entry number [{1}]
safety_grating_covered "开门时安全光栅被遮挡,料仓暂停运行." "The safety grating is blocked when opening the door, SMD BOX stoped. "
take_out_reel_failure "料叉没有成功取出料盘,请检查库位[{0}],取出料盘后请复位." "Take out reel failure. Please check the position [{0}], take out the reel manually, and reset."
FrmStoreBox_btnCDLed_Text Turn off equipment lighting
CustAlarm {0}
AbsMove Abosolute move
FrmStoreBox_tabPage1_Text Servo debug
FrmStoreBox_label21_Text Select location:
FrmStoreBox_label1_Text Axis 4 pressure axis
AxisHomeMoveAlarm The movement {0} axis {1} receives the origin completion signal& the current location [{2}]& the error is too large& it needs to alarm
OutStoreFailed Providing failed
FrmAxisDebug_label5_Text Inching speed
FrmStoreBox_btnOpenAxis_Text Open servo
FrmStoreBox_label49_Text AC server:
AutoReset Receive reset signal& automatical reset
FrmAxisDebug_btnUpDownMove_Text l-axis+ascent
FrmStoreBox_label27_Text Port No.:
FrmStoreBox_label4_Text Axis 3 in-out axis
WaitInstoreTimeOut [{0}] timeout [wait to store][{1} seconds]
