Skip to content

孙克 / ACSingleStore

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 83e877cb 由 刘韬
选项

优化温湿度控制,添加湿度补偿

1 个父辈 d6afcf61
内嵌 并排
正在显示 9 个修改的文件 包含 53 行增加 和 21 行删除
source/ACSingleStore/App.config
......@@ -13,6 +13,8 @@
<!-- 停止吹气的判断值（配置值=服务器发送的湿度值-停止吹气值）-->
<add key="StopBlowValue" value="4"/>
<add key="DoorOpenAirBlow" value="0"/>
<add key="humidityadjust" value="-11"/>
<add key="humiditylimited" value="4"/>
<add key="ACBaudRate" value ="115200"/>
<!--Server address-->
......
source/ACSingleStore/Properties/AssemblyInfo.cs
......@@ -9,7 +9,7 @@ using System.Runtime.InteropServices;
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("SO951-HC-ACSingleStore 459bc4ee5f86ccae0d831b10a463616def194026")]
[assembly: AssemblyProduct("SO951-HC-ACSingleStore d6afcf61f69f86354ab33fb351e3c50845d3f3da")]
[assembly: AssemblyCopyright("Copyright ? 2017")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
......
source/ACSingleStore/resources/language.resource
......@@ -344,4 +344,4 @@ AxisTipControl_label_speed_Text#点动速度：#Inching speed#タップスピー
safety_grating_covered#开门时安全光栅被遮挡,料仓暂停运行.#The safety grating is blocked when opening the door, SMD BOX stoped. #ドアを開けると安全格子が遮られ、設備は運転を一時停止します。
take_out_reel_failure#料叉没有成功取出料盘,请检查库位[{posId}],取出料盘后请复位.#Take out reel failure. Please check the position [{posId}], take out the reel manually, and reset.#フォークはトレイの取り出しに成功しなかった。保管場所[{posId}]を確認し、手動でパレットを取り出し、リセットしてください。
\ No newline at end of file
take_out_reel_failure#料叉没有成功取出料盘,请检查库位[{0}],取出料盘后请复位.#Take out reel failure. Please check the position [{0}], take out the reel manually, and reset.#フォークはトレイの取り出しに成功しなかった。保管場所[{0}]を確認し、手動でパレットを取り出し、リセットしてください。
\ No newline at end of file
source/Common/Setting_Init.cs
......@@ -106,5 +106,7 @@ namespace OnlineStore.Common
public static string QRCodeCount = "MaxScanCount";
public static string DoorOpenAirBlow= "DoorOpenAirBlow";
public static string UseAirBlow = "UseAirBlow";
public static string humidityadjust = "humidityadjust";
public static string humiditylimited = "humiditylimited";
}
}
source/Common/util/HttpHelper.cs
......@@ -12,6 +12,7 @@ using System.Security.Cryptography;
using System.Security.Cryptography.X509Certificates;
using System.Reflection;
using log4net;
using System.Threading;
namespace OnlineStore.Common
{
......@@ -41,15 +42,24 @@ namespace OnlineStore.Common
}
else
{
string json = JsonHelper.SerializeObject(operation);
string result = Post(url, json);
Operation op = JsonHelper.DeserializeJsonToObject<Operation>(result);
if (operation.op > 0 || (op != null && op.op > 0) || (isLog == 1))
if (Monitor.TryEnter(operation))
{
LogUtil.info("Send [" + json + "] Revice [" + result + "]");
try
{
string json = JsonHelper.SerializeObject(operation);
string result = Post(url, json);
Operation op = JsonHelper.DeserializeJsonToObject<Operation>(result);
if (operation.op > 0 || (op != null && op.op > 0) || (isLog == 1))
{
LogUtil.info("Send [" + json + "] Revice [" + result + "]");
}
return op;
}
finally {
Monitor.Exit(operation);
}
}
return op;
}
}
catch (Exception ex)
......
source/Common/util/HumitureController.cs
......@@ -26,8 +26,14 @@ namespace OnlineStore.Common
private static string LogName = "";
public static int HumitureControllerType = ConfigAppSettings.GetIntValue(Setting_Init.HumitureControllerType);
static double humidityadjust = (double)ConfigAppSettings.GetNumValue(Setting_Init.humidityadjust);
static double humiditylimited = (double)ConfigAppSettings.GetNumValue(Setting_Init.humiditylimited);
public static bool Init(string port)
{
{
if (IsRun && port.Equals(serialPort))
{
return true;
......@@ -36,8 +42,8 @@ namespace OnlineStore.Common
{
Release();
}
LogName = "温湿度传感器[" + port + "]";
LogName = "温湿度传感器[" + port + $"]{humidityadjust},{humiditylimited}";
LogUtil.info(LogName);
if (sb == null)
{
serialPort = port;
......@@ -85,6 +91,14 @@ namespace OnlineStore.Common
List<double> data = queryData();
if (data.Count.Equals(2))
{
if (humidityadjust !=0 && humiditylimited !=0)
{
if (data[0] + humidityadjust < humiditylimited)
{
data[0] = humiditylimited;
}else
data[0] += humidityadjust;
}
param = new ASTemperateParam(data[1], data[0]);
}
LastData = param;
......
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean.cs
......@@ -1644,11 +1644,12 @@ namespace OnlineStore.DeviceLibrary
string codeSize = "";
List<string> codelists = new List<string>(codeList);
//= 7x12 = CODE
foreach (string str in codelists.ToArray())
foreach (string code in codelists.ToArray())
{
string code = str;
if (code.Trim().Length > 5)
continue;
//根据二维码开头获取固定尺寸
codeSize = Config.GetCodeSize(str.Trim());
codeSize = Config.GetCodeSize(code.Trim());
if (!String.IsNullOrEmpty(codeSize))
{
LogUtil.info(Name + "夹具弃用条码【" + codeSize + "】：" + code);
......
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean_Partial.cs
......@@ -725,16 +725,17 @@ namespace OnlineStore.DeviceLibrary
{
StoreMove.NextMoveStep(StoreMoveStep.SO_12_DeviceOutFromDoor);
OutStoreLog("出库：SO_12 叉子从出料口返回，，进出轴动作至P1(待机点) ");
InOutBackToP1(moveP.InOut_P1);
}
else if (StoreMove.MoveStep == StoreMoveStep.SO_12_DeviceOutFromDoor)
{
HIKCamera.Current.CameraGrabOne(HIKCamera.Current.GetFixtureStateFilename(StoreMove.MoveParam, StoreMove.MoveType, FixtureState.DoorOut));
string posId = StoreMove.MoveParam != null ? StoreMove.MoveParam.PositionNum : "";
lastPosId = posId;
lastPosIdStatus = StoreStatus.OutStorEnd;
storeStatus = StoreStatus.OutStorEnd;
SendLineStatus();
InOutBackToP1(moveP.InOut_P1);
if (IOManager.IOValue(IO_Type.TrayCheck_Door).Equals(IO_VALUE.HIGH))
{
StoreMove.NextMoveStep(StoreMoveStep.SO_13_CheckTray);
......@@ -742,13 +743,14 @@ namespace OnlineStore.DeviceLibrary
}
else
{
HIKCamera.Current.CameraGrabOne(HIKCamera.Current.GetFixtureStateFilename(StoreMove.MoveParam, StoreMove.MoveType, FixtureState.DoorOut));
StoreMove.NextMoveStep(StoreMoveStep.SO_TakeReelFaile);
//StoreMove.NextMoveStep(StoreMoveStep.SO_15_WaitTake);
//OutStoreLog("出库：出库未检测到料盘,出库失败");
//OutStoreLog("出库：SO_12_DeviceOutFromDoor 升降轴返回，轴2至P1(待机点) ,关闭仓门,更改状态为出库完成");
//ACAxisMove(Config.UpDown_Axis, StoreMove.MoveParam.MoveP.UpDown_P1, Config.UpDownAxis_P1_Speed);
//CloseDoor();
SetWarnMsg(ResourceControl.take_out_reel_failure, $"料叉没有成功取出料盘,请检查库位[{posId}]");
SetWarnMsg(ResourceControl.take_out_reel_failure, posId);
OutStoreLog($"料叉没有成功取出料盘,请检查库位[{posId}]");
}
//改为出库完成
......@@ -758,10 +760,11 @@ namespace OnlineStore.DeviceLibrary
else if (StoreMove.MoveStep == StoreMoveStep.SO_TakeReelFaile)
{
string posId = StoreMove.MoveParam != null ? StoreMove.MoveParam.PositionNum : "";
SetWarnMsg(ResourceControl.CustAlarm, $"料叉没有成功取出料盘,请检查库位[{posId}]");
SetWarnMsg(ResourceControl.take_out_reel_failure, posId);
}
else if (StoreMove.MoveStep == StoreMoveStep.SO_13_CheckTray)
{
HIKCamera.Current.CameraGrabOne(HIKCamera.Current.GetFixtureStateFilename(StoreMove.MoveParam, StoreMove.MoveType, FixtureState.DoorOut));
SO_14_GoBack();
}
else if (StoreMove.MoveStep == StoreMoveStep.SO_14_GoBack)
......
source/DeviceLibrary/halcon/CodeManager.cs
......@@ -32,7 +32,7 @@ namespace OnlineStore.DeviceLibrary
{
if (QRCodeCount < 1)
{
QRCodeCount = 1;
QRCodeCount = 2;
}
string nameStr = ConfigAppSettings.GetValue(Setting_Init.CameraName);
string codeStr = ConfigAppSettings.GetValue(Setting_Init.CodeType);
......@@ -135,7 +135,7 @@ namespace OnlineStore.DeviceLibrary
[HandleProcessCorruptedStateExceptions]
public static List<string> CameraScan()
{
int codeCount = 1;
int codeCount = QRCodeCount;
List<string> codeList = new List<string>();
if (cameraNameList == null || cameraNameList.Count <= 0)
{
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!