中英文修改

source/ACSingleStore/ACSingleStore.csproj

@@ -177,6 +177,9 @@
       <DependentUpon>Settings.settings</DependentUpon>
       <DependentUpon>Settings.settings</DependentUpon>
       <DesignTimeSharedInput>True</DesignTimeSharedInput>
       <DesignTimeSharedInput>True</DesignTimeSharedInput>
     </Compile>
     </Compile>
+    <None Include="resource\ResourceMap.csv">
+      <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
+    </None>
   </ItemGroup>
   </ItemGroup>
   <ItemGroup>
   <ItemGroup>
     <None Include="App.config">
     <None Include="App.config">

source/ACSingleStore/ResourceCulture.cs

@@ -82,10 +82,25 @@ namespace OnlineStore
                             {
                             {
                                 eng = array[2].Replace('&', ',').Trim();
                                 eng = array[2].Replace('&', ',').Trim();
                             }
                             }
-                            ChinaMap.Add(key, china);
+                            if (ChinaMap.ContainsKey(key))
+                            {
+                                ChinaMap[key] = china;
+                            }
+                            else
+                            {
+                                ChinaMap.Add(key, china);
+                            }
                             if (String.IsNullOrEmpty(eng).Equals(false))
                             if (String.IsNullOrEmpty(eng).Equals(false))
                             {
                             {
-                                EnglishMap.Add(key, eng);
+                                if (EnglishMap.ContainsKey(key))
+                                {
+                                    EnglishMap[key] = eng;
+                                }
+                                else
+                                {
+                                    EnglishMap.Add(key, eng);
+                                }
+                             //   EnglishMap.Add(key, eng);
                             }
                             }
                         }
                         }
                     }catch(Exception ex)
                     }catch(Exception ex)
@@ -170,7 +185,13 @@ namespace OnlineStore
                     {
                     {
                         if (array.Length >= 3)
                         if (array.Length >= 3)
                         {
                         {
-                            map.Add(array[1].Replace('&', ',').Trim(), array[2].Replace('&', ',').Trim());
+                            string key = array[1].Replace('&', ',').Trim();
+                            string value = array[2].Replace('&', ',').Trim();
+                            if (map.ContainsKey(key))
+                            {
+                                map[key] = value;
+                            }
+                            else { map.Add(key, value); }
                         }
                         }
                     }
                     }
                     catch (Exception ex)
                     catch (Exception ex)

source/ACSingleStore/resource/language.resource

-FrmStoreBox_Text,AC_SA_料仓,AC_SA_SMD BOX,
-FrmStoreBox_tabControl2_Text,FrmStoreBox_tabControl2_Text,FrmStoreBox_tabControl2_Text,
-FrmStoreBox_tabPage4_Text,料仓操作,Operation,
-FrmStoreBox_chbBuzzer_Text,启用蜂鸣器,Enable the buzzer,
-FrmStoreBox_btnStoreExit_Text,退出系统,Exit,
-FrmStoreBox_btnStoreHome_Text,回待机位,Back to standby,
-FrmStoreBox_chbAuto_Text,开机自动启动,Auto start,
-FrmStoreBox_btnSotreReset_Text,复位,Reset,
-FrmStoreBox_btnStoreStop_Text,停止,Stop,
-FrmStoreBox_btnStoreStart_Text,启动,Start,
-FrmStoreBox_tabPage5_Text,设备调试,Device Debugging,
-FrmStoreBox_btnUpdown_Text,升降轴位置调试,Updown-Axis Debug Location,
-FrmStoreBox_btnDebug_Text,启用调试,Enable debugging,
-FrmStoreBox_btnAxisOff_Text,料仓运转OFF,SMD BOX operating OFF,
-FrmStoreBox_btnAxisOn_Text,料仓运转ON,SMD BOX operating ON,
-FrmStoreBox_btnScanCode_Text,扫码测试,scanning test,
-FrmStoreBox_btnAxisP_Text,轴卡点动,axis inching adjusting,
-FrmStoreBox_btnIO_Text,查看IO,IO check,
-FrmStoreBox_tabPage6_Text,其他,Other,
-FrmStoreBox_btnLan_Text,语言,Language,
-FrmStoreBox_button4_Text,关于软件,About,
-FrmStoreBox_btnClearL_Text,清理日志,Clean log,
-FrmStoreBox_btnLogDebug_Text,开启DEBUG,Open Debug,
-FrmStoreBox_tabControl1_Text,FrmStoreBox_tabControl1_Text,FrmStoreBox_tabControl1_Text,
-FrmStoreBox_tabPage3_Text,操作日志,Operation Log,
-FrmStoreBox_btnCloseLed_Text,关闭相机照明,Close Camera light,
-FrmStoreBox_btnClearLog_Text,清理日志,Clean log,
-FrmStoreBox_btnOpenLed_Text,打开相机照明,Open Camera light,
-FrmStoreBox_btnCloseDoor_Text,关闭仓门,Close door,
-FrmStoreBox_btnOpenDoor_Text,打开仓门,Open door,
-FrmStoreBox_tabPage1_Text,伺服调试,Servo debug,
-FrmStoreBox_axisMoveControl1_Text,FrmStoreBox_axisMoveControl1_Text,FrmStoreBox_axisMoveControl1_Text,
-FrmStoreBox_groupBox1_Text,伺服状态,Servo state,
-FrmStoreBox_axis_4_Alarm_Text,FrmStoreBox_axis_4_Alarm_Text,FrmStoreBox_axis_4_Alarm_Text,
-FrmStoreBox_label1_Text,label1,label1,
-FrmStoreBox_axis_1_Alarm_Text,FrmStoreBox_axis_1_Alarm_Text,FrmStoreBox_axis_1_Alarm_Text,
-FrmStoreBox_axis_3_Alarm_Text,FrmStoreBox_axis_3_Alarm_Text,FrmStoreBox_axis_3_Alarm_Text,
-FrmStoreBox_axis_2_Alarm_Text,FrmStoreBox_axis_2_Alarm_Text,FrmStoreBox_axis_2_Alarm_Text,
-FrmStoreBox_label38_Text,ALM:,ALM:,
-FrmStoreBox_label12_Text,出入库目标值:,Providing target value:,
-FrmStoreBox_label4_Text,轴三:进出轴,Axis 3 in-out axis,
-FrmStoreBox_label3_Text,轴二:上下轴,Axis 2 lifting axis,
-FrmStoreBox_label5_Text,轴一:旋转轴,Axis 1 rotation axis,
-FrmStoreBox_label43_Text,输出脉冲值:,Output impulse valve:,
-FrmStoreBox_label42_Text,编码器计数:,Encoder count:,
-FrmStoreBox_groupAxis_Text,伺服运动,Servo motor,
-FrmStoreBox_label7_Text,伺服状态:,Servo Info,
-FrmStoreBox_label17_Text,负极限信号:,Negative limit signal:,
-FrmStoreBox_label19_Text,正极限信号:,Positive limit signal:,
-FrmStoreBox_label6_Text,原点信号:,Home signal:,
-FrmStoreBox_label11_Text,HOME-CMP状态:,HOME-CMP state:,
-FrmStoreBox_label10_Text,BUSY状态:,BUSY state:,
-FrmStoreBox_label2_Text,报警状态:,Alarm state:,
-FrmStoreBox_btnGetAlarm_Text,读取状态,Read state,
-FrmStoreBox_btnReadPosition_Text,读取位置,Update location,
-FrmStoreBox_label8_Text,实时位置:,Actual position:,
-FrmStoreBox_btnOpenAxis_Text,打开伺服,Open servo,
-FrmStoreBox_btnCloseAxis_Text,关闭伺服,Close servo,
-FrmStoreBox_label47_Text,速度:,Speed:,
-FrmStoreBox_btnAxisVMove_Text,匀速运动,uniform move,
-FrmStoreBox_btnAxisRMove_Text,相对运动,Relative move,
-FrmStoreBox_btnAxisReturnHome_Text,原点返回,Back to home,
-FrmStoreBox_btnAxisAMove_Text,绝对运动,Abosolute move,
-FrmStoreBox_btnComAlarmClear_Text,清除报警,Clear alarm,
-FrmStoreBox_label48_Text,位置:,Position:,
-FrmStoreBox_btnAxisStop_Text,停止运动,Stop move,
-FrmStoreBox_label45_Text,端口号:,Port number:,
-FrmStoreBox_label46_Text,地址:,Address:,
-FrmStoreBox_label49_Text,AC伺服:,AC server:,
-FrmStoreBox_tabPage2_Text,压紧轴/温湿度,Temp controller,
-FrmStoreBox_groupCode_Text,扫码测试,scanning test,
-FrmStoreBox_label32_Text,二维码内容:,Code info:,
-FrmStoreBox_label31_Text,图片:,Image:,
-FrmStoreBox_btnCodeTest_Text,扫码测试,scanning test,
-FrmStoreBox_btnOpenFile_Text,打开本地图片,Open Local Image,
-FrmStoreBox_groupBox7_Text,温控器调试,Temp controller debug,
-FrmStoreBox_groupHistory_Text,历史记录,History:,
-FrmStoreBox_btnSelHistory_Text,查询记录信息,Query record information,
-FrmStoreBox_label24_Text,记录总条数:,Total number:,
-FrmStoreBox_label30_Text,记录时间:,Time:,
-FrmStoreBox_label23_Text,当前指针位置:,pointer position:,
-FrmStoreBox_label26_Text,记录湿度值:,humidity value:,
-FrmStoreBox_label22_Text,记录温度值:,temperature value:,
-FrmStoreBox_btnSelTemp_Text,查询实时数据,Query real-time data,
-FrmStoreBox_label29_Text,湿度:,Humidity:,
-FrmStoreBox_label28_Text,温度:,Temperature:,
-FrmStoreBox_label27_Text,端口号:,Port number:,
-FrmStoreBox_btnTempClose_Text,断开,Disconnect,
-FrmStoreBox_btnTempInit_Text,初始化,Initialize,
-FrmStoreBox_groupBox3_Text,设备状态,Machine state,
-FrmStoreBox_lblWarnMsg_Text,FrmStoreBox_lblWarnMsg_Text,FrmStoreBox_lblWarnMsg_Text,
-FrmStoreBox_lblThisSta_Text,等待启动,Wait to start,
-FrmStoreBox_groupInout_Text,料仓操作,Operation,
-FrmStoreBox_lblTemp_Text,当前温度--，当前湿度--,Current temperature--& current humidity--,
-FrmStoreBox_lblMsg_Text,没有开启自动出入库,Auto providing not start,
-FrmStoreBox_btnSavePosition_Text,保存位置,Save position,
-FrmStoreBox_btnStartAuTo_Text,启动自动模式,Start auto mode,
-FrmStoreBox_label9_Text,入库间隔仓位:,Storage space:,
-FrmStoreBox_label21_Text,选择仓位:,Seletct Position:,
-FrmStoreBox_btnInStore_Text,入库测试,Saving testing,
-FrmStoreBox_btnOutStore_Text,出库测试,Outbound test,
-FrmStoreBox_btnComP1_Text,压紧轴待机点P1:,p-axis stanby P1:,
-FrmStoreBox_btnInOutP2_Text,进出轴取料点P2:,In-out axis P2:,
-FrmStoreBox_btnInOutP1_Text,进出轴待机点P1:,In-out axis stanby P1:,
-FrmStoreBox_btnMiddleP1_Text,旋转轴待机点P1:,Rotation axis stanby P1:,
-FrmStoreBox_btnUpDownP7_Text,升降轴入料缓冲点P7:,l-axis storing buffer P7:,
-FrmStoreBox_btnUpDownP8_Text,升降轴出料缓冲点P8:,l-axis providing buffer P8:,
-FrmStoreBox_btnUpDownP1_Text,升降轴入料点P1:,l-axis storing P1:,
-FrmStoreBox_btnUpDownP2_Text,升降轴出料前点P2:,l-axis providing P2:,
-FrmStoreBox_btnComP3_Text,压紧轴压紧前点P3:,p-axis former pressing P3:,
-FrmStoreBox_btnComP2_Text,压紧轴压紧点P2:,p-axis pressing P2:,
-FrmStoreBox_btnInOutP3_Text,进出轴取料点P3:,In-out axis P3:,
-FrmStoreBox_btnMiddleP2_Text,旋转轴库位点P2:,Rotation axis storage P2:,
-FrmStoreBox_btnUpDownP5_Text,升降轴出料前点P5:,l-axis former providing P5:,
-FrmStoreBox_btnUpDownP6_Text,升降轴出料缓冲点P6:,l-axis providing buffer P6:,
-FrmStoreBox_btnUpDownP3_Text,升降轴入料前点P3:,l-axis former storing P3:,
-FrmStoreBox_btnUpDownP4_Text,升降轴入料缓冲点P4:,l-axis storing buffer P4:,
-FrmPwd_Text,请输入密码,Enter PSW:,
-FrmPwd_btnNext_Text,确定,Confirm,
-FrmPwd_btnBack_Text,返回,Back,
-FrmPwd_label1_Text,请输入密码:,Enter PSW:,
-FrmIOStatus_Text,IO查看,IO check,
-FrmIOStatus_button1_Text,关闭,Close,
-FrmIOStatus_groupBox2_Text,高度传感器,Height Single:,
-FrmIOStatus_label11_Text,4:,4:,
-FrmIOStatus_label10_Text,料盘尺寸:,Size:,
-FrmIOStatus_label9_Text,料盘高度:,Hieght:,
-FrmIOStatus_label8_Text,->,->,
-FrmIOStatus_label7_Text,3:,3:,
-FrmIOStatus_label4_Text,2:,2:,
-FrmIOStatus_label1_Text,1:,1:,
-FrmIOStatus_groupBox1_Text,DO写入,DO write,
-FrmIOStatus_btnCloseLed_Text,关闭相机照明,Close Camera light,
-FrmIOStatus_label3_Text,选择DO:,Select DO:,
-FrmIOStatus_btnOpenLed_Text,打开相机照明,Open Camera light,
-FrmIOStatus_label2_Text,SlaveId,SlaveId,
-FrmIOStatus_btnCloseAxisBreak_Text,关闭刹车,Close brake,
-FrmIOStatus_label17_Text,设备IP:,IP:,
-FrmIOStatus_btnReadIO_Text,读取IO状态,Read IO state,
-FrmIOStatus_btnOpenAxisBreak_Text,打开刹车,Open brake,
-FrmIOStatus_label14_Text,地址:,Servo address:,
-FrmIOStatus_btnWriteSingleDO_Text,写入DO,Write DO,
-FrmIOStatus_label5_Text,定时(ms):,Time(ms):,
-FrmIOStatus_btnReadAllDi_Text,读取所有DI,Read all DI,
-FrmIOStatus_label6_Text,写入值:,Write value:,
-FrmIOStatus_btnReadAllDo_Text,读取所有DO,Read all DO,
-FrmIOStatus_btnCloseDoor_Text,关闭仓门,Close door,
-FrmIOStatus_btnOpenDoor_Text,打开仓门,Open door,
-FrmIOStatus_groupBox4_Text,DO列表,DO list,
-FrmIOStatus_groupBox3_Text,DI列表,DI list,
-FrmIOStatus_chbAutoRead_Text,自动读取,Auto read,
-FrmAxisDebug_Text,料仓BOX_1 _轴点动调试,SMD BOX_1 _axis inching adjusting,
-FrmAxisDebug_btnCCopy_Text,复制,Copy,
-FrmAxisDebug_btnICopy_Text,复制,Copy,
-FrmAxisDebug_btnUCopy_Text,复制,Copy,
-FrmAxisDebug_btnMCopy_Text,复制,Copy,
-FrmAxisDebug_lblSpeed_Text,点动速度=0.2倍目标速度,Speed=0.2xTarget Speed,
-FrmAxisDebug_btnComMovej_Text,压紧轴-(向上),Pressure axis-(up),
-FrmAxisDebug_btnComMove_Text,压紧轴+(向下),Pressure axis+(down),
-FrmAxisDebug_label4_Text,（轴四）压紧轴,(Axis 4)pressure axis,
-FrmAxisDebug_label6_Text,实时坐标,Real time coordinate,
-FrmAxisDebug_label5_Text,点动速度,Inching speed,
-FrmAxisDebug_button1_Text,关闭,Close,
-FrmAxisDebug_btnInOutMovej_Text,进出轴-(后退),In-out axis-backward,
-FrmAxisDebug_btnUpDownMovej_Text,升降轴-(下降),l-axis-descent,
-FrmAxisDebug_btnMiddleMovej_Text,旋转轴-(逆时针),Rotation axis- anti-clockwise,
-FrmAxisDebug_btnInOutMove_Text,进出轴+(前进),In-out axis+forward,
-FrmAxisDebug_btnUpDownMove_Text,升降轴+(上升),l-axis+ascent,
-FrmAxisDebug_btnMiddleMove_Text,旋转轴+(顺时针),Rotation axis+clockwise,
-FrmAxisDebug_label3_Text,（轴三）进出轴,(Axis 3) in-out axis,
-FrmAxisDebug_label2_Text,（轴二）升降轴,(Axis 2) lifting axis,
-FrmAxisDebug_label1_Text,（轴一）旋转轴,(Axis 1) rotation axis,
-升降轴位置调试:,升降轴位置调试:,Updown-Axis Debug Location:,
-FrmPositionTool_Text,升降轴位置测试,Updown-Axis Debug Location,
-FrmPositionTool_groupBox6_Text,FrmPositionTool_groupBox6_Text,FrmPositionTool_groupBox6_Text,
-FrmPositionTool_groupBox2_Text,位置信息,location information,
-FrmPositionTool_label10_Text,入料缓冲点P4偏移量:,Point P4 offset:,
-FrmPositionTool_label9_Text,入料前点P3偏移量:,Point P3 offset:,
-FrmPositionTool_label5_Text,出料缓冲点P6偏移量:,Point P6 offset:,
-FrmPositionTool_label4_Text,出料前点P5偏移值:,Point P5 offset:,
-FrmPositionTool_btnOpenFolder_Text,打开文件夹,Open the folder,
-FrmPositionTool_btnGetActualPosition_Text,读取位置,Update location,
-FrmPositionTool_label8_Text,移动速度:,Move speed:,
-FrmPositionTool_ioStatusControl1_Text,FrmPositionTool_ioStatusControl1_Text,FrmPositionTool_ioStatusControl1_Text,
-FrmPositionTool_label1_Text,label1,label1,
-FrmPositionTool_btnAbsMove_Text,开始运动,Start,
-FrmPositionTool_label3_Text,保存文件名称:,file name:,
-FrmPositionTool_label7_Text,实际位置:,actual position:,
-FrmPositionTool_label13_Text,目标位置:,target location:,
-FrmPositionTool_btnSdStop_Text,停止,Stop,
-FrmPositionTool_label6_Text,目标位置:,target location:,
-FrmPositionTool_groupBox1_Text,设备信息,equipment information,
-FrmPositionTool_label12_Text,端口号:,Port number:,
-FrmPositionTool_label18_Text,地址:,Servo address:,
-FrmPositionTool_btnHomeMove_Text,原点返回,Back to home,
-FrmPositionTool_btnServoOn_Text,打开伺服,Open servo,
-FrmPositionTool_btnServoOff_Text,关闭伺服,Close servo,
-FrmPositionTool_label2_Text,检测信号地址:,signal address:,
-FrmPositionTool_btnExit_Text,退出,Exit,
-FrmPositionTool_btnClear_Text,清理,Clear,
-检测信号,检测信号,detection signal,
-FrmLanguare_Text,语言设置,Language,
-FrmLanguare_btnCancel_Text,取消,Cancel,
-FrmLanguare_btnOk_Text,确定,Confirm,
-FrmLanguare_rbtnEnglish_Text,英文,English,
-FrmLanguare_rbtnChina_Text,中文,Chinese,
-FrmAbout_Text,软件信息,Software Info,
-FrmAbout_btnCopy_Text,复制编号,Copy,
-FrmAbout_lblCodeName_Text,软件编号:52 43 2D 44 4C 2D 41 43 53 69 6E 67 6C 65 53 74 6F 72 65,Software Number:52 43 2D 44 4C 2D 41 43 53 69 6E 67 6C 65 53 74 6F 72 65,
-FrmAbout_lblTime_Text,更新时间:2020-02-07 21:16,UpdateTime:2020-02-07 21:16,
-FrmAbout_lblVersion_Text,版本号:1.0.7342.38298,Version:1.0.7342.38298,
-FrmAbout_btnNext_Text,确定,Confirm,
-Middle_Axis,（轴一）旋转轴,(Axis 1) rotation axis,
-UpDown_Axis,（轴二）升降轴轴,(Axis 2) lifting axis,
-InOut_Axis,（轴三）进出轴,(Axis 3) in-out axis,
-Comp_Axis,（轴四）压紧轴,(Axis 4)pressure axis,
-启用调试,启用调试,Enable debugging,
-等待启动,等待启动,Wait to start,
-前门未关,前门未关,Front door open,
-叉子料盘检测有料，请检查,叉子料盘检测有料，请检查,Fork tray full& please check,
-开始自动出入库,开始自动出入库,Start auto storing,
-停止自动出入库,停止自动出入库,Stop auto storing,
-自动出库:,自动出库:,Auto outbound:,
-自动入库:,自动入库:,Auto warehousing:,
-定位气缸不在下降端，不能移动进出轴,定位气缸不在下降端，不能移动进出轴,The position cylinder is not at the descent position& not move the in-out axis,
-警告,警告,Warning,
-开始循环出库,开始循环出库,Start looping out,
-停止循环出库,停止循环出库,Stop the loop,
-FrmStoreBox_显示ToolStripMenuItem_Text,显示,Show,
-FrmStoreBox_toolStripMenuItem1_Text,退出,Exit,
-X01,急停,Emergency stop,
-X02,复位,Reset,
-X03,自动,Auto,
-X04,气压检测,Pressure detection,
-X05,料盘检测1（进料口）,Tray check 1,
-X06,料盘检测2（料叉）,Tray check 2,
-X07,进料口门上升端,Portal ascent position,
-X08,进料口门下降端,Portal descent position,
-X09,安全光栅,Security grating,
-X10,前门限位,front door limit,
-X11,左侧门限位,Left side threshold,
-X12,右侧门限位,Right hand threshold,
-Y01,自动指示灯,Auto indicator light,
-Y02,故障指示灯,Error indicator light,
-Y03,待机指示灯,indicator light,
-Y04,故障蜂鸣器,Fault buzzer,
-Y05,吹气SOL ON,Blowing SOL ON,
-Y06,料仓运转ON,SMD BOX operating ON,
-Y07,轴2刹车电源ON,Brake power of axis2 ON,
-Y08,进料口门上升SOL,Portal ascent SOL,
-Y09,进料口门下降SOL,Portal descent SOL,
-Y10,相机照明开,Camera light ON,
-Y10,设备照明开,Device light ON,
-是否确定退出？,是否确定退出？,Are you sure you want to quit?,
-提示,提示,Remind,
-点动速度,点动速度,Inching speed,
-倍目标速度,倍目标速度,Double target speed,
-禁用调试,禁用调试,Disable debugging,
+FrmStoreBox_Text,AC_SA_料仓,AC_SA_SMD BOX
+FrmStoreBox_tabControl2_Text,FrmStoreBox_tabControl2_Text,FrmStoreBox_tabControl2_Text
+FrmStoreBox_tabPage4_Text,料仓操作,Operation
+FrmStoreBox_chbBuzzer_Text,启用蜂鸣器,Enable the buzzer
+FrmStoreBox_btnStoreExit_Text,退出系统,Exit
+FrmStoreBox_btnStoreHome_Text,回待机位,Back to standby
+FrmStoreBox_chbAuto_Text,开机自动启动,Auto start
+FrmStoreBox_btnSotreReset_Text,复位,Reset
+FrmStoreBox_btnStoreStop_Text,停止,Stop
+FrmStoreBox_btnStoreStart_Text,启动,Start
+FrmStoreBox_tabPage5_Text,设备调试,Device Debugging
+FrmStoreBox_btnUpdown_Text,升降轴位置调试,Updown-Axis Debug Location
+FrmStoreBox_btnDebug_Text,启用调试,Enable debugging
+FrmStoreBox_btnAxisOff_Text,料仓运转OFF,SMD BOX operating OFF
+FrmStoreBox_btnAxisOn_Text,料仓运转ON,SMD BOX operating ON
+FrmStoreBox_btnScanCode_Text,扫码测试,scanning test
+FrmStoreBox_btnAxisP_Text,轴卡点动,axis inching adjusting
+FrmStoreBox_btnIO_Text,查看IO,IO check
+FrmStoreBox_tabPage6_Text,其他,Other
+FrmStoreBox_btnLan_Text,语言,Language
+FrmStoreBox_button4_Text,关于软件,About
+FrmStoreBox_btnClearL_Text,清理日志,Clean log
+FrmStoreBox_btnLogDebug_Text,开启DEBUG,Open Debug
+FrmStoreBox_tabControl1_Text,FrmStoreBox_tabControl1_Text,FrmStoreBox_tabControl1_Text
+FrmStoreBox_tabPage3_Text,操作日志,Operation Log
+FrmStoreBox_btnCloseLed_Text,关闭相机照明,Close Camera light
+FrmStoreBox_btnClearLog_Text,清理日志,Clean log
+FrmStoreBox_btnOpenLed_Text,打开相机照明,Open Camera light
+FrmStoreBox_btnCloseDoor_Text,关闭仓门,Close door
+FrmStoreBox_btnOpenDoor_Text,打开仓门,Open door
+FrmStoreBox_tabPage1_Text,伺服调试,Servo debug
+FrmStoreBox_axisMoveControl1_Text,FrmStoreBox_axisMoveControl1_Text,FrmStoreBox_axisMoveControl1_Text
+FrmStoreBox_groupBox1_Text,伺服状态,Servo state
+FrmStoreBox_axis_4_Alarm_Text,FrmStoreBox_axis_4_Alarm_Text,FrmStoreBox_axis_4_Alarm_Text
+FrmStoreBox_label1_Text,label1,label1
+FrmStoreBox_axis_1_Alarm_Text,FrmStoreBox_axis_1_Alarm_Text,FrmStoreBox_axis_1_Alarm_Text
+FrmStoreBox_axis_3_Alarm_Text,FrmStoreBox_axis_3_Alarm_Text,FrmStoreBox_axis_3_Alarm_Text
+FrmStoreBox_axis_2_Alarm_Text,FrmStoreBox_axis_2_Alarm_Text,FrmStoreBox_axis_2_Alarm_Text
+FrmStoreBox_label38_Text,ALM:,ALM:
+FrmStoreBox_label12_Text,出入库目标值:,Providing target value:
+FrmStoreBox_label4_Text,轴三:进出轴,Axis 3 in-out axis
+FrmStoreBox_label3_Text,轴二:上下轴,Axis 2 lifting axis
+FrmStoreBox_label5_Text,轴一:旋转轴,Axis 1 rotation axis
+FrmStoreBox_label43_Text,输出脉冲值:,Output impulse valve:
+FrmStoreBox_label42_Text,编码器计数:,Encoder count:
+FrmStoreBox_groupAxis_Text,伺服运动,Servo motor
+FrmStoreBox_label7_Text,伺服状态:,Servo Info
+FrmStoreBox_label17_Text,负极限信号:,Negative limit signal:
+FrmStoreBox_label19_Text,正极限信号:,Positive limit signal:
+FrmStoreBox_label6_Text,原点信号:,Home signal:
+FrmStoreBox_label11_Text,HOME-CMP状态:,HOME-CMP state:
+FrmStoreBox_label10_Text,BUSY状态:,BUSY state:
+FrmStoreBox_label2_Text,报警状态:,Alarm state:
+FrmStoreBox_btnGetAlarm_Text,读取状态,Read state
+FrmStoreBox_btnReadPosition_Text,读取位置,Update location
+FrmStoreBox_label8_Text,实时位置:,Actual position:
+FrmStoreBox_btnOpenAxis_Text,打开伺服,Open servo
+FrmStoreBox_btnCloseAxis_Text,关闭伺服,Close servo
+FrmStoreBox_label47_Text,速度:,Speed:
+FrmStoreBox_btnAxisVMove_Text,匀速运动,uniform move
+FrmStoreBox_btnAxisRMove_Text,相对运动,Relative move
+FrmStoreBox_btnAxisReturnHome_Text,原点返回,Back to home
+FrmStoreBox_btnAxisAMove_Text,绝对运动,Abosolute move
+FrmStoreBox_btnComAlarmClear_Text,清除报警,Clear alarm
+FrmStoreBox_label48_Text,位置:,Position:
+FrmStoreBox_btnAxisStop_Text,停止运动,Stop move
+FrmStoreBox_label45_Text,端口号:,Port number:
+FrmStoreBox_label46_Text,地址:,Address:
+FrmStoreBox_label49_Text,AC伺服:,AC server:
+FrmStoreBox_tabPage2_Text,压紧轴/温湿度,Temp controller
+FrmStoreBox_groupCode_Text,扫码测试,scanning test
+FrmStoreBox_label32_Text,二维码内容:,Code info:
+FrmStoreBox_label31_Text,图片:,Image:
+FrmStoreBox_btnCodeTest_Text,扫码测试,scanning test
+FrmStoreBox_btnOpenFile_Text,打开本地图片,Open Local Image
+FrmStoreBox_groupBox7_Text,温控器调试,Temp controller debug
+FrmStoreBox_groupHistory_Text,历史记录,History:
+FrmStoreBox_btnSelHistory_Text,查询记录信息,Query record information
+FrmStoreBox_label24_Text,记录总条数:,Total number:
+FrmStoreBox_label30_Text,记录时间:,Time:
+FrmStoreBox_label23_Text,当前指针位置:,pointer position:
+FrmStoreBox_label26_Text,记录湿度值:,humidity value:
+FrmStoreBox_label22_Text,记录温度值:,temperature value:
+FrmStoreBox_btnSelTemp_Text,查询实时数据,Query real-time data
+FrmStoreBox_label29_Text,湿度:,Humidity:
+FrmStoreBox_label28_Text,温度:,Temperature:
+FrmStoreBox_label27_Text,端口号:,Port number:
+FrmStoreBox_btnTempClose_Text,断开,Disconnect
+FrmStoreBox_btnTempInit_Text,初始化,Initialize
+FrmStoreBox_groupBox3_Text,设备状态,Machine state
+FrmStoreBox_lblWarnMsg_Text,FrmStoreBox_lblWarnMsg_Text,FrmStoreBox_lblWarnMsg_Text
+FrmStoreBox_lblThisSta_Text,等待启动,Wait to start
+FrmStoreBox_groupInout_Text,料仓操作,Operation
+FrmStoreBox_lblTemp_Text,当前温度--，当前湿度--,Current temperature--& current humidity--
+FrmStoreBox_lblMsg_Text,没有开启自动出入库,Auto providing not start
+FrmStoreBox_btnSavePosition_Text,保存位置,Save position
+FrmStoreBox_btnStartAuTo_Text,启动自动模式,Start auto mode
+FrmStoreBox_label9_Text,入库间隔仓位:,Storage space:
+FrmStoreBox_label21_Text,选择仓位:,Seletct Position:
+FrmStoreBox_btnInStore_Text,入库测试,Saving testing
+FrmStoreBox_btnOutStore_Text,出库测试,Outbound test
+FrmStoreBox_btnComP1_Text,压紧轴待机点P1:,p-axis stanby P1:
+FrmStoreBox_btnInOutP2_Text,进出轴取料点P2:,In-out axis P2:
+FrmStoreBox_btnInOutP1_Text,进出轴待机点P1:,In-out axis stanby P1:
+FrmStoreBox_btnMiddleP1_Text,旋转轴待机点P1:,Rotation axis stanby P1:
+FrmStoreBox_btnUpDownP7_Text,升降轴入料缓冲点P7:,l-axis storing buffer P7:
+FrmStoreBox_btnUpDownP8_Text,升降轴出料缓冲点P8:,l-axis providing buffer P8:
+FrmStoreBox_btnUpDownP1_Text,升降轴入料点P1:,l-axis storing P1:
+FrmStoreBox_btnUpDownP2_Text,升降轴出料前点P2:,l-axis providing P2:
+FrmStoreBox_btnComP3_Text,压紧轴压紧前点P3:,p-axis former pressing P3:
+FrmStoreBox_btnComP2_Text,压紧轴压紧点P2:,p-axis pressing P2:
+FrmStoreBox_btnInOutP3_Text,进出轴取料点P3:,In-out axis P3:
+FrmStoreBox_btnMiddleP2_Text,旋转轴库位点P2:,Rotation axis storage P2:
+FrmStoreBox_btnUpDownP5_Text,升降轴出料前点P5:,l-axis former providing P5:
+FrmStoreBox_btnUpDownP6_Text,升降轴出料缓冲点P6:,l-axis providing buffer P6:
+FrmStoreBox_btnUpDownP3_Text,升降轴入料前点P3:,l-axis former storing P3:
+FrmStoreBox_btnUpDownP4_Text,升降轴入料缓冲点P4:,l-axis storing buffer P4:
+FrmPwd_Text,请输入密码,Enter PSW:
+FrmPwd_btnNext_Text,确定,Confirm
+FrmPwd_btnBack_Text,返回,Back
+FrmPwd_label1_Text,请输入密码:,Enter PSW:
+FrmIOStatus_Text,IO查看,IO check
+FrmIOStatus_button1_Text,关闭,Close
+FrmIOStatus_groupBox2_Text,高度传感器,Height Single:
+FrmIOStatus_label11_Text,4:,4:
+FrmIOStatus_label10_Text,料盘尺寸:,Size:
+FrmIOStatus_label9_Text,料盘高度:,Hieght:
+FrmIOStatus_label8_Text,->,->
+FrmIOStatus_label7_Text,3:,3:
+FrmIOStatus_label4_Text,2:,2:
+FrmIOStatus_label1_Text,1:,1:
+FrmIOStatus_groupBox1_Text,DO写入,DO write
+FrmIOStatus_btnCloseLed_Text,关闭相机照明,Close Camera light
+FrmIOStatus_label3_Text,选择DO:,Select DO:
+FrmIOStatus_btnOpenLed_Text,打开相机照明,Open Camera light
+FrmIOStatus_label2_Text,SlaveId,SlaveId
+FrmIOStatus_btnCloseAxisBreak_Text,关闭刹车,Close brake
+FrmIOStatus_label17_Text,设备IP:,IP:
+FrmIOStatus_btnReadIO_Text,读取IO状态,Read IO state
+FrmIOStatus_btnOpenAxisBreak_Text,打开刹车,Open brake
+FrmIOStatus_label14_Text,地址:,Servo address:
+FrmIOStatus_btnWriteSingleDO_Text,写入DO,Write DO
+FrmIOStatus_label5_Text,定时(ms):,Time(ms):
+FrmIOStatus_btnReadAllDi_Text,读取所有DI,Read all DI
+FrmIOStatus_label6_Text,写入值:,Write value:
+FrmIOStatus_btnReadAllDo_Text,读取所有DO,Read all DO
+FrmIOStatus_btnCloseDoor_Text,关闭仓门,Close door
+FrmIOStatus_btnOpenDoor_Text,打开仓门,Open door
+FrmIOStatus_groupBox4_Text,DO列表,DO list
+FrmIOStatus_groupBox3_Text,DI列表,DI list
+FrmIOStatus_chbAutoRead_Text,自动读取,Auto read
+FrmAxisDebug_Text,料仓BOX_1 _轴点动调试,SMD BOX_1 _axis inching adjusting
+FrmAxisDebug_btnCCopy_Text,复制,Copy
+FrmAxisDebug_btnICopy_Text,复制,Copy
+FrmAxisDebug_btnUCopy_Text,复制,Copy
+FrmAxisDebug_btnMCopy_Text,复制,Copy
+FrmAxisDebug_lblSpeed_Text,点动速度=0.2倍目标速度,Speed=0.2xTarget Speed
+FrmAxisDebug_btnComMovej_Text,压紧轴-(向上),Pressure axis-(up)
+FrmAxisDebug_btnComMove_Text,压紧轴+(向下),Pressure axis+(down)
+FrmAxisDebug_label4_Text,（轴四）压紧轴,(Axis 4)pressure axis
+FrmAxisDebug_label6_Text,实时坐标,Real time coordinate
+FrmAxisDebug_label5_Text,点动速度,Inching speed
+FrmAxisDebug_button1_Text,关闭,Close
+FrmAxisDebug_btnInOutMovej_Text,进出轴-(后退),In-out axis-backward
+FrmAxisDebug_btnUpDownMovej_Text,升降轴-(下降),l-axis-descent
+FrmAxisDebug_btnMiddleMovej_Text,旋转轴-(逆时针),Rotation axis- anti-clockwise
+FrmAxisDebug_btnInOutMove_Text,进出轴+(前进),In-out axis+forward
+FrmAxisDebug_btnUpDownMove_Text,升降轴+(上升),l-axis+ascent
+FrmAxisDebug_btnMiddleMove_Text,旋转轴+(顺时针),Rotation axis+clockwise
+FrmAxisDebug_label3_Text,（轴三）进出轴,(Axis 3) in-out axis
+FrmAxisDebug_label2_Text,（轴二）升降轴,(Axis 2) lifting axis
+FrmAxisDebug_label1_Text,（轴一）旋转轴,(Axis 1) rotation axis
+升降轴位置调试:,升降轴位置调试:,Updown-Axis Debug Location:
+FrmPositionTool_Text,升降轴位置测试,Updown-Axis Debug Location
+FrmPositionTool_groupBox6_Text,FrmPositionTool_groupBox6_Text,FrmPositionTool_groupBox6_Text
+FrmPositionTool_groupBox2_Text,位置信息,location information
+FrmPositionTool_label10_Text,入料缓冲点P4偏移量:,Point P4 offset:
+FrmPositionTool_label9_Text,入料前点P3偏移量:,Point P3 offset:
+FrmPositionTool_label5_Text,出料缓冲点P6偏移量:,Point P6 offset:
+FrmPositionTool_label4_Text,出料前点P5偏移值:,Point P5 offset:
+FrmPositionTool_btnOpenFolder_Text,打开文件夹,Open the folder
+FrmPositionTool_btnGetActualPosition_Text,读取位置,Update location
+FrmPositionTool_label8_Text,移动速度:,Move speed:
+FrmPositionTool_ioStatusControl1_Text,FrmPositionTool_ioStatusControl1_Text,FrmPositionTool_ioStatusControl1_Text
+FrmPositionTool_label1_Text,label1,label1
+FrmPositionTool_btnAbsMove_Text,开始运动,Start
+FrmPositionTool_label3_Text,保存文件名称:,file name:
+FrmPositionTool_label7_Text,实际位置:,actual position:
+FrmPositionTool_label13_Text,目标位置:,target location:
+FrmPositionTool_btnSdStop_Text,停止,Stop
+FrmPositionTool_label6_Text,目标位置:,target location:
+FrmPositionTool_groupBox1_Text,设备信息,equipment information
+FrmPositionTool_label12_Text,端口号:,Port number:
+FrmPositionTool_label18_Text,地址:,Servo address:
+FrmPositionTool_btnHomeMove_Text,原点返回,Back to home
+FrmPositionTool_btnServoOn_Text,打开伺服,Open servo
+FrmPositionTool_btnServoOff_Text,关闭伺服,Close servo
+FrmPositionTool_label2_Text,检测信号地址:,signal address:
+FrmPositionTool_btnExit_Text,退出,Exit
+FrmPositionTool_btnClear_Text,清理,Clear
+检测信号,检测信号,detection signal
+FrmLanguare_Text,语言设置,Language
+FrmLanguare_btnCancel_Text,取消,Cancel
+FrmLanguare_btnOk_Text,确定,Confirm
+FrmLanguare_rbtnEnglish_Text,英文,English
+FrmLanguare_rbtnChina_Text,中文,Chinese
+FrmAbout_Text,软件信息,Software Info
+FrmAbout_btnCopy_Text,复制编号,Copy
+FrmAbout_lblCodeName_Text,软件编号:52 43 2D 44 4C 2D 41 43 53 69 6E 67 6C 65 53 74 6F 72 65,Software Number:52 43 2D 44 4C 2D 41 43 53 69 6E 67 6C 65 53 74 6F 72 65
+FrmAbout_lblTime_Text,更新时间:2020-02-07 21:16,UpdateTime:2020-02-07 21:16
+FrmAbout_lblVersion_Text,版本号:1.0.7342.38298,Version:1.0.7342.38298
+FrmAbout_btnNext_Text,确定,Confirm
+Middle_Axis,（轴一）旋转轴,(Axis 1) rotation axis
+UpDown_Axis,（轴二）升降轴轴,(Axis 2) lifting axis
+InOut_Axis,（轴三）进出轴,(Axis 3) in-out axis
+Comp_Axis,（轴四）压紧轴,(Axis 4)pressure axis
+启用调试,启用调试,Enable debugging
+等待启动,等待启动,Wait to start
+前门未关,前门未关,Front door open
+叉子料盘检测有料，请检查,叉子料盘检测有料，请检查,Fork tray full& please check
+开始自动出入库,开始自动出入库,Start auto storing
+停止自动出入库,停止自动出入库,Stop auto storing
+自动出库:,自动出库:,Auto outbound:
+自动入库:,自动入库:,Auto warehousing:
+定位气缸不在下降端，不能移动进出轴,定位气缸不在下降端，不能移动进出轴,The position cylinder is not at the descent position& not move the in-out axis
+警告,警告,Warning
+开始循环出库,开始循环出库,Start looping out
+停止循环出库,停止循环出库,Stop the loop
+FrmStoreBox_显示ToolStripMenuItem_Text,显示,Show
+FrmStoreBox_toolStripMenuItem1_Text,退出,Exit
+X01,急停,Emergency stop
+X02,复位,Reset
+X03,自动,Auto
+X04,气压检测,Pressure detection
+X05,料盘检测1（进料口）,Tray check 1
+X06,料盘检测2（料叉）,Tray check 2
+X07,进料口门上升端,Portal ascent position
+X08,进料口门下降端,Portal descent position
+X09,安全光栅,Security grating
+X10,前门限位,front door limit
+X11,左侧门限位,Left side threshold
+X12,右侧门限位,Right hand threshold
+Y01,自动指示灯,Auto indicator light
+Y02,故障指示灯,Error indicator light
+Y03,待机指示灯,indicator light
+Y04,故障蜂鸣器,Fault buzzer
+Y05,吹气SOL ON,Blowing SOL ON
+Y06,料仓运转ON,SMD BOX operating ON
+Y07,轴2刹车电源ON,Brake power of axis2 ON
+Y08,进料口门上升SOL,Portal ascent SOL
+Y09,进料口门下降SOL,Portal descent SOL
+Y10,相机照明开,Camera light ON
+是否确定退出？,是否确定退出？,Are you sure you want to quit?
+提示,提示,Remind
+点动速度,点动速度,Inching speed
+倍目标速度,倍目标速度,Double target speed
+禁用调试,禁用调试,Disable debugging
 无报警，无出入库或者重置操作时，才可以回待机点！,无报警，无出入库或者重置操作时，才可以回待机点！,"No alarm
 无报警，无出入库或者重置操作时，才可以回待机点！,无报警，无出入库或者重置操作时，才可以回待机点！,"No alarm
 inSuddenStop,收到急停信号，报警急停,Emergency stop signal received，alarm emergency stop
 inSuddenStop,收到急停信号，报警急停,Emergency stop signal received，alarm emergency stop
-InoutAlarm,进出轴报警！复位失败，请检查,in-out axis alarm! Reset failed& please check,
-OpenAxisFail,打开轴{0}失败,Failed to open axis {0},
-NoAIr,未检测到气压信号,Pressure signal undetected,
-AutoReset,收到复位信号，自动复位,Receive reset signal& automatical reset,
-AxisAlarm,运动轴{0}报警,Motion axis {0} alarm,
-startFail,启动失败:急停未开,Startup failure: emergency stop not opened,
-WaitSingleTimeOut,等待信号{0}={1}超时,Wait signal {0}={1} timeout,
-startFailAir,启动失败:没有气压信号,Startup failure: no air pressure signal,
-AxisHomeMoveAlarm,运动{0}轴{1}收到原点完成信号，当前位置[{2}]，误差过大，需要报警,The movement {0} axis {1} receives the origin completion signal& the current position [{2}]& the error is too large& it needs to alarm,
-AxisMoveAlarm,运动{0}轴{1}目标位置[{2}]当前位置{3}误差过大，需要报警,Movement {0} axis {1} target position [{2}] current position {3} error is too large& need to alarm,
-MoveTimeOut,{0}]超时{1}[{2}],{0}]Time out {1}[{2}],
-WaitInstoreTimeOut,[{0}]超时[等待可以入库][{1}秒],[{0}] timeout [wait to store][{1} seconds],
-HasWare,叉子料盘检测有料，请检查,Fork tray full& please check,
-NoCodeMsg,未扫到二维码，请重新放入料盘,If the qr code is not scanned& please put it back into the material tray,
-InStoreNoCode,未扫到二维码，需要将料盘送出,The qr code is not scanned& the material plate needs to be sent out,
-InStoreError,入库库位格式错误:条码[{0}]库位号[{1}],Incorrect format of the library entry: barcode [{0}] library entry number [{1}],
-InStoreNoPosition,入库未找到库位:条码[{0}]库位号[{1}],Storage location not found: barcode [{0}] storage location [{1}],
-OutStoreError,出库格式错误{0},Providing format error{0},
-OutStoreNoPosition,出库未找库位:{0},Storage location not found :{0},
-HomeMove,原点返回,Back to home,
-AbsMove,绝对运动,Abosolute move,
-WaitIo,IO信号等待,IO wait,
-WaitTime,时间等待:,Time to wait:,
-TargetPosition,电钢目标位置:,Target position of electric steel:,
-trayHeight,料盘高度,Reel height,
-请先启动料仓！,请先启动料仓！,Please start the system！,
-保存位置失败！,保存位置失败！,Save position Fail!,
-警告（叉子在待机位时，才能移动升降轴和旋转轴）,警告（叉子在待机位时，才能移动升降轴和旋转轴）,Warn(move the lifting and rotating axis only when the gripper is stanby),
-叉子不在待机位，请先将叉子退回待机位,叉子不在待机位，请先将叉子退回待机位,Gripper not stanby& return the gripper to standby,
-确定开始自动出入库？,确定开始自动出入库？,Make sure to start automatic storage ？,
-请输入正确的密码,请输入正确的密码,Enter the right PSW,
-打开串口失败,打开串口失败,Failed to open serial port,
-请输入正确的速度,请输入正确的速度,Please enter the correct speed, 
+InoutAlarm,进出轴报警！复位失败，请检查,in-out axis alarm! Reset failed& please check
+OpenAxisFail,打开轴{0}失败,Failed to open axis {0}
+NoAIr,未检测到气压信号,Pressure signal undetected
+AutoReset,收到复位信号，自动复位,Receive reset signal& automatical reset
+AxisAlarm,运动轴{0}报警,Motion axis {0} alarm
+startFail,启动失败:急停未开,Startup failure: emergency stop not opened
+WaitSingleTimeOut,等待信号{0}={1}超时,Wait signal {0}={1} timeout
+startFailAir,启动失败:没有气压信号,Startup failure: no air pressure signal
+AxisHomeMoveAlarm,运动{0}轴{1}收到原点完成信号，当前位置[{2}]，误差过大，需要报警,The movement {0} axis {1} receives the origin completion signal& the current position [{2}]& the error is too large& it needs to alarm
+AxisMoveAlarm,运动{0}轴{1}目标位置[{2}]当前位置{3}误差过大，需要报警,Movement {0} axis {1} target position [{2}] current position {3} error is too large& need to alarm
+MoveTimeOut,{0}]超时{1}[{2}],{0}]Time out {1}[{2}]
+WaitInstoreTimeOut,[{0}]超时[等待可以入库][{1}秒],[{0}] timeout [wait to store][{1} seconds]
+HasWare,叉子料盘检测有料，请检查,Fork tray full& please check
+NoCodeMsg,未扫到二维码，请重新放入料盘,If the qr code is not scanned& please put it back into the material tray
+InStoreNoCode,未扫到二维码，需要将料盘送出,The qr code is not scanned& the material plate needs to be sent out
+InStoreError,入库库位格式错误:条码[{0}]库位号[{1}],Incorrect format of the library entry: barcode [{0}] library entry number [{1}]
+InStoreNoPosition,入库未找到库位:条码[{0}]库位号[{1}],Storage location not found: barcode [{0}] storage location [{1}]
+OutStoreError,出库格式错误{0},Providing format error{0}
+OutStoreNoPosition,出库未找库位:{0},Storage location not found :{0}
+HomeMove,原点返回,Back to home
+AbsMove,绝对运动,Abosolute move
+WaitIo,IO信号等待,IO wait
+WaitTime,时间等待:,Time to wait:
+TargetPosition,电钢目标位置:,Target position of electric steel:
+trayHeight,料盘高度,Reel height
+请先启动料仓！,请先启动料仓！,Please start the system！
+保存位置失败！,保存位置失败！,Save position Fail!
+警告（叉子在待机位时，才能移动升降轴和旋转轴）,警告（叉子在待机位时，才能移动升降轴和旋转轴）,Warn(move the lifting and rotating axis only when the gripper is stanby)
+叉子不在待机位，请先将叉子退回待机位,叉子不在待机位，请先将叉子退回待机位,Gripper not stanby& return the gripper to standby
+确定开始自动出入库？,确定开始自动出入库？,Make sure to start automatic storage ？
+请输入正确的密码,请输入正确的密码,Enter the right PSW
+打开串口失败,打开串口失败,Failed to open serial port
+请输入正确的速度,请输入正确的速度,Please enter the correct speed
 自动出库：,自动出库：,Auto outbound：
 自动出库：,自动出库：,Auto outbound：
 自动入库：,自动入库：,Auto warehousing：
 自动入库：,自动入库：,Auto warehousing：
 升降轴位置调试：,升降轴位置调试：,Updown-Axis Debug Location
 升降轴位置调试：,升降轴位置调试：,Updown-Axis Debug Location
-关闭DEBUG,关闭DEBUG, Close DEBUG
-开启DEBUG,开启DEBUG, Open DEBUG
+关闭DEBUG,关闭DEBUG,Close DEBUG
+开启DEBUG,开启DEBUG,Open DEBUG
 出库{0}叉子从库位退出后，未检测到料盘有料,出库{0}叉子从库位退出后，未检测到料盘有料,Outgoing {0} after the fork exits from the storage，no material on the tray is detected
 出库{0}叉子从库位退出后，未检测到料盘有料,出库{0}叉子从库位退出后，未检测到料盘有料,Outgoing {0} after the fork exits from the storage，no material on the tray is detected
 左侧门未关,左侧门未关,Left door open
 左侧门未关,左侧门未关,Left door open
 右侧门未关,右侧门未关,Right door open
 右侧门未关,右侧门未关,Right door open
 FrmStoreBox_chbIsDebug_Text,调试状态,debug mode
 FrmStoreBox_chbIsDebug_Text,调试状态,debug mode
-光栅被遮挡,光栅被遮挡,Grating blocked
\ No newline at end of file
+光栅被遮挡,光栅被遮挡,Grating blocked
+InTrouble,故障中,In trouble
+OutStoreBoxEnd,料盘出仓位完成,Providing executed
+OutStoreExecute,出库执行中,Providing Executing
+StoreOnline,设备联机,System online
+SuddenStop,急停中,Emerengy stop
+OutMoveExecute,出库完成,Providing Executed
+InStoreFailed,入库失败,Saving failed
+OutStoreFailed,出库失败,Providing failed
+WaitSingle,等待信号,Wait signal
+TimeOut,超时,Time out