Skip to content

孙克 / ACSingleStore

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 00737a8b 由 几米阳光
选项

修改料盘检测信号

1 个父辈 56e9ed9a
内嵌 并排
正在显示 5 个修改的文件 包含 25 行增加 和 24 行删除
source/DeviceLibrary/StoreConfig/AC/StoreConfig.csv
...@@ -3,8 +3,8 @@ DI,急停,SuddenStop_BTN,200,192.168.200.10,0,急停,X01,DI-01,0 ...@@ -3,8 +3,8 @@ DI,急停,SuddenStop_BTN,200,192.168.200.10,0,急停,X01,DI-01,0
DI,复位,Reset_BTN,201,192.168.200.10,0,复位,X02,DI-02,0 DI,复位,Reset_BTN,201,192.168.200.10,0,复位,X02,DI-02,0
DI,自动,AutoRun_Single,202,192.168.200.10,0,自动,X03,DI-03,0 DI,自动,AutoRun_Single,202,192.168.200.10,0,自动,X03,DI-03,0
DI,气压检测,Airpressure_Check,203,192.168.200.10,0,气压检测,X04,DI-04,0 DI,气压检测,Airpressure_Check,203,192.168.200.10,0,气压检测,X04,DI-04,0
DI,料盘检测1,TrayCheck_1,204,192.168.200.10,0,料盘检测1,X05,DI-05,0 DI,料仓门口料盘检测,TrayCheck_Door,204,192.168.200.10,0,料仓门口料盘检测,X05,DI-05,0
DI,料盘检测2,TrayCheck_2,205,192.168.200.10,0,料盘检测2,X06,DI-06,0 DI,叉子料盘检测,TrayCheck_Fixture,205,192.168.200.10,0,叉子料盘检测,X06,DI-06,0
DI,进料口门上升端,Door_Up,206,192.168.200.10,0,进料口门上升端,X07,DI-07,0 DI,进料口门上升端,Door_Up,206,192.168.200.10,0,进料口门上升端,X07,DI-07,0
DI,进料口门下降端,Door_Down,207,192.168.200.10,0,进料口门下降端,X08,DI-08,0 DI,进料口门下降端,Door_Down,207,192.168.200.10,0,进料口门下降端,X08,DI-08,0
DI,定位气缸上升端,LocationCylinder_Up,208,192.168.200.10,0,定位气缸上升端,X09,DI-09,0 DI,定位气缸上升端,LocationCylinder_Up,208,192.168.200.10,0,定位气缸上升端,X09,DI-09,0
......
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean.cs
...@@ -303,8 +303,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -303,8 +303,8 @@ namespace OnlineStore.DeviceLibrary
LogUtil.info(LOGGER, StoreName + "到待机状态，进出轴到P1，判断叉子没有料盘"); LogUtil.info(LOGGER, StoreName + "到待机状态，进出轴到P1，判断叉子没有料盘");
ACAxisMove(Config.InOut_Axis, Config.InOutAxis_P1_Position, Config.InOutAxis_P1_Speed ); ACAxisMove(Config.InOut_Axis, Config.InOutAxis_P1_Position, Config.InOutAxis_P1_Speed );
//判断叉子没有料盘 //判断叉子没有料盘
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_3, IO_VALUE.LOW)); StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_Fixture, IO_VALUE.LOW));
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_4, IO_VALUE.LOW)); //StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_4, IO_VALUE.LOW));
} }
public override void Reset() public override void Reset()
{ {
...@@ -397,8 +397,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -397,8 +397,8 @@ namespace OnlineStore.DeviceLibrary
AxisCountClear(Config.InOut_Axis); AxisCountClear(Config.InOut_Axis);
ACAxisMove(Config.InOut_Axis, Config.InOutAxis_P1_Position, Config.InOutAxis_P1_Speed); ACAxisMove(Config.InOut_Axis, Config.InOutAxis_P1_Position, Config.InOutAxis_P1_Speed);
//判断叉子没有料盘 //判断叉子没有料盘
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_3, IO_VALUE.LOW)); StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_Fixture, IO_VALUE.LOW));
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_4, IO_VALUE.LOW)); //StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_4, IO_VALUE.LOW));
CloseDoorAndWait(); CloseDoorAndWait();
break; break;
case StoreMoveStep.BOX_H_InOutToP1: case StoreMoveStep.BOX_H_InOutToP1:
...@@ -510,8 +510,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -510,8 +510,8 @@ namespace OnlineStore.DeviceLibrary
AxisCountClear(Config.InOut_Axis); AxisCountClear(Config.InOut_Axis);
ACAxisMove(Config.InOut_Axis, Config.InOutAxis_P1_Position, Config.InOutAxis_P1_Speed); ACAxisMove(Config.InOut_Axis, Config.InOutAxis_P1_Position, Config.InOutAxis_P1_Speed);
//判断叉子没有料盘 //判断叉子没有料盘
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_3, IO_VALUE.LOW)); StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_Fixture, IO_VALUE.LOW));
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_4, IO_VALUE.LOW)); //StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_4, IO_VALUE.LOW));
CloseDoorAndWait(); CloseDoorAndWait();
break; break;
...@@ -942,11 +942,12 @@ namespace OnlineStore.DeviceLibrary ...@@ -942,11 +942,12 @@ namespace OnlineStore.DeviceLibrary
{ //判断是否需要出入库 { //判断是否需要出入库
if (StoreMove.MoveType.Equals(StoreMoveType.None)) if (StoreMove.MoveType.Equals(StoreMoveType.None))
{ {
IO_VALUE checkIO = KNDIOValue(IO_Type.TrayCheck_1); IO_VALUE checkIO = KNDIOValue(IO_Type.TrayCheck_Door);
IO_VALUE checkIO2 = KNDIOValue(IO_Type.TrayCheck_2); //IO_VALUE checkIO2 = KNDIOValue(IO_Type.TrayCheck_2);
//判断料门口是否有料 //判断料门口是否有料
if ((checkIO.Equals(IO_VALUE.HIGH)) && checkIO2.Equals(IO_VALUE.HIGH)) if ((checkIO.Equals(IO_VALUE.HIGH)) )
{ //if ((checkIO.Equals(IO_VALUE.HIGH)) && checkIO2.Equals(IO_VALUE.HIGH))
{
if (IsScanCode) if (IsScanCode)
{ {
return; return;
......
source/DeviceLibrary/acSingleStore/AC_SA_BoxBean_Partial.cs
...@@ -252,8 +252,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -252,8 +252,8 @@ namespace OnlineStore.DeviceLibrary
//料盘检测 //料盘检测
InStoreLog(" 入库：SI_00 检测料盘信号"); InStoreLog(" 入库：SI_00 检测料盘信号");
StoreMove.NextMoveStep(StoreMoveStep.SI_00_TrayCheck); StoreMove.NextMoveStep(StoreMoveStep.SI_00_TrayCheck);
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_1, IO_VALUE.HIGH)); StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_Door, IO_VALUE.HIGH));
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_2, IO_VALUE.HIGH)); //StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_2, IO_VALUE.HIGH));
} }
else else
{ {
...@@ -622,8 +622,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -622,8 +622,8 @@ namespace OnlineStore.DeviceLibrary
ACAxisMove(Config.UpDown_Axis, moveP.UpDown_P2, Config.UpDownAxis_P2_Speed); ACAxisMove(Config.UpDown_Axis, moveP.UpDown_P2, Config.UpDownAxis_P2_Speed);
ACAxisMove(Config.Middle_Axis, moveP.Middle_P1, Config.MiddleAxis_P1_Speed); ACAxisMove(Config.Middle_Axis, moveP.Middle_P1, Config.MiddleAxis_P1_Speed);
//此处需要等待box门口没有盘 //此处需要等待box门口没有盘
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_1, IO_VALUE.LOW)); StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_Door, IO_VALUE.LOW));
StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_2, IO_VALUE.LOW)); //StoreMove.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.TrayCheck_2, IO_VALUE.LOW));
} }
else if (StoreMove.MoveStep == StoreMoveStep.SO_08_ToDoorPosition) else if (StoreMove.MoveStep == StoreMoveStep.SO_08_ToDoorPosition)
......
source/LoadCVSLibrary/storeConfig/config/AC_SA_Config.cs
...@@ -405,10 +405,10 @@ namespace OnlineStore.LoadCSVLibrary ...@@ -405,10 +405,10 @@ namespace OnlineStore.LoadCSVLibrary
MustHaveDIList.Add(IO_Type.Reset_BTN); MustHaveDIList.Add(IO_Type.Reset_BTN);
MustHaveDIList.Add(IO_Type.AutoRun_Single); MustHaveDIList.Add(IO_Type.AutoRun_Single);
MustHaveDIList.Add(IO_Type.Airpressure_Check); MustHaveDIList.Add(IO_Type.Airpressure_Check);
MustHaveDIList.Add(IO_Type.TrayCheck_1); MustHaveDIList.Add(IO_Type.TrayCheck_Door);
MustHaveDIList.Add(IO_Type.TrayCheck_2); //MustHaveDIList.Add(IO_Type.TrayCheck_2);
MustHaveDIList.Add(IO_Type.TrayCheck_3); MustHaveDIList.Add(IO_Type.TrayCheck_Fixture);
MustHaveDIList.Add(IO_Type.TrayCheck_4); //MustHaveDIList.Add(IO_Type.TrayCheck_4);
MustHaveDIList.Add(IO_Type.Door_Up); MustHaveDIList.Add(IO_Type.Door_Up);
MustHaveDIList.Add(IO_Type.Door_Down); MustHaveDIList.Add(IO_Type.Door_Down);
......
source/LoadCVSLibrary/storeConfig/config/Store_IO_Type.cs
...@@ -263,13 +263,13 @@ namespace OnlineStore.LoadCSVLibrary ...@@ -263,13 +263,13 @@ namespace OnlineStore.LoadCSVLibrary
/// <summary> /// <summary>
/// 进料口料盘确认1 TrayCheck_1 /// 进料口料盘确认1 TrayCheck_1
/// </summary> /// </summary>
public static string TrayCheck_1 = "TrayCheck_1"; public static string TrayCheck_Door = "TrayCheck_Door";
/// <summary> /// <summary>
/// 进料口料盘确认2 TrayCheck_2 /// 进料口料盘确认2 TrayCheck_2
/// </summary> /// </summary>
public static string TrayCheck_2 = "TrayCheck_2"; //public static string TrayCheck_2 = "TrayCheck_2";
public static string TrayCheck_3 = "TrayCheck_3"; public static string TrayCheck_Fixture = "TrayCheck_Fixture";
public static string TrayCheck_4 = "TrayCheck_4"; //public static string TrayCheck_4 = "TrayCheck_4";
/// <summary> /// <summary>
/// 进出料口门上升端 Door_Up /// 进出料口门上升端 Door_Up
/// </summary> /// </summary>
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!