FrmStoreBox_tabControl2_Text	FrmStoreBox_tabControl2_Text	FrmStoreBox_tabControl2_Text
FrmStoreBox_tabPage4_Text	料仓操作	Operation
FrmStoreBox_tabPage9_Text	    IO调试    	IO Debug
FrmStoreBox_chbBuzzer_Text	启用蜂鸣器	Enable the buzzer
FrmStoreBox_btnStoreExit_Text	退出系统	Exit
FrmStoreBox_btnStoreHome_Text	回待机位	Back to standby
FrmStoreBox_chbAuto_Text	开机自动启动	Auto start
FrmStoreBox_btnSotreReset_Text	复位	Reset
FrmStoreBox_btnStoreStop_Text	停止	Stop
FrmStoreBox_btnStoreStart_Text	启动	Start
FrmStoreBox_tabPage5_Text	设备调试	Device Debugging
FrmStoreBox_btnUpdown_Text	升降轴位置调试	Updown-Axis Debug Location
FrmStoreBox_btnDebug_Text	启用调试	Enable debugging
FrmStoreBox_btnAxisOff_Text	料仓运转OFF	SMD BOX operating OFF
FrmStoreBox_btnAxisOn_Text	料仓运转ON	SMD BOX operating ON
FrmStoreBox_btnScanCode_Text	扫码测试	scanning test
FrmStoreBox_btnAxisP_Text	轴卡点动	axis inching adjusting
FrmStoreBox_btnIO_Text	查看IO	IO check
FrmStoreBox_tabPage6_Text	其他	Other
FrmStoreBox_btnLan_Text	语言	Language
FrmStoreBox_button4_Text	关于软件	About
FrmStoreBox_btnClearL_Text	清理日志	Clean log
FrmStoreBox_btnLogDebug_Text	开启DEBUG	Open Debug
FrmStoreBox_tabControl1_Text	FrmStoreBox_tabControl1_Text	FrmStoreBox_tabControl1_Text
FrmStoreBox_tabPage3_Text	操作日志	Operation Log
FrmStoreBox_btnCloseLed_Text	关闭相机照明	Close Camera light
FrmStoreBox_btnClearLog_Text	清理日志	Clean log
FrmStoreBox_btnOpenLed_Text	打开相机照明	Open Camera light
FrmStoreBox_btnCloseDoor_Text	关闭仓门	Close door
FrmStoreBox_btnOpenDoor_Text	打开仓门	Open door
FrmStoreBox_tabPage1_Text	伺服调试	Servo debug
FrmStoreBox_axisMoveControl1_Text	FrmStoreBox_axisMoveControl1_Text	FrmStoreBox_axisMoveControl1_Text
FrmStoreBox_groupBox1_Text	伺服状态	Servo state
FrmStoreBox_axis_4_Alarm_Text		
FrmStoreBox_label1_Text	轴四:压紧轴	Axis 4 pressure axis
FrmStoreBox_label_speed	点动速度	Inching speed
FrmStoreBox_axis_1_Alarm_Text		
FrmStoreBox_axis_3_Alarm_Text		
FrmStoreBox_axis_2_Alarm_Text		
FrmStoreBox_label38_Text	ALM:	ALM:
FrmStoreBox_label12_Text	出入库目标值:	Providing target value:
FrmStoreBox_label4_Text	轴三:进出轴	Axis 3 in-out axis
FrmStoreBox_label3_Text	轴二:上下轴	Axis 2 lifting axis
FrmStoreBox_label5_Text	轴一:旋转轴	Axis 1 rotation axis
FrmStoreBox_label43_Text	输出脉冲值:	Output impulse valve:
FrmStoreBox_label42_Text	编码器计数:	Encoder count:
FrmStoreBox_groupAxis_Text	伺服运动	Servo motor
FrmStoreBox_label7_Text	伺服状态:	Servo Info
FrmStoreBox_label17_Text	负极限信号:	Negative limit signal:
FrmStoreBox_label19_Text	正极限信号:	Positive limit signal:
FrmStoreBox_label6_Text	原点信号:	Home signal:
FrmStoreBox_label11_Text	HOME-CMP状态:	HOME-CMP state:
FrmStoreBox_label10_Text	BUSY状态:	BUSY state:
FrmStoreBox_label2_Text	报警状态:	Alarm state:
FrmStoreBox_btnGetAlarm_Text	读取状态	Read state
FrmStoreBox_btnReadPosition_Text	读取位置	Update location
FrmStoreBox_label8_Text	实时位置:	Actual position:
FrmStoreBox_btnOpenAxis_Text	打开伺服	Open servo
FrmStoreBox_btnCloseAxis_Text	关闭伺服	Close servo
FrmStoreBox_label47_Text	速度:	Speed:
FrmStoreBox_btnAxisVMove_Text	匀速运动	uniform move
FrmStoreBox_btnAxisRMove_Text	相对运动	Relative move
FrmStoreBox_btnAxisReturnHome_Text	原点返回	Back to home
FrmStoreBox_btnAxisAMove_Text	绝对运动	Abosolute move
FrmStoreBox_btnComAlarmClear_Text	清除报警	Clear alarm
FrmStoreBox_label48_Text	位置:	Position:
FrmStoreBox_btnAxisStop_Text	停止运动	Stop move
FrmStoreBox_label45_Text	端口号:	Port number:
FrmStoreBox_label46_Text	地址:	Address:
FrmStoreBox_label49_Text	AC伺服:	AC server:
FrmStoreBox_tabPage2_Text	温湿度	Temp controller
FrmStoreBox_groupCode_Text	扫码测试	scanning test
FrmStoreBox_label32_Text	二维码内容:	Code info:
FrmStoreBox_label31_Text	图片:	Image:
FrmStoreBox_btnCodeTest_Text	扫码测试	scanning test
FrmStoreBox_btnOpenFile_Text	打开本地图片	Open Local Image
FrmStoreBox_groupBox7_Text	温控器调试	Temp controller debug
FrmStoreBox_groupHistory_Text	历史记录	History:
FrmStoreBox_btnSelHistory_Text	查询记录信息	Query record information
FrmStoreBox_label24_Text	记录总条数:	Total number:
FrmStoreBox_label30_Text	记录时间:	Time:
FrmStoreBox_label23_Text	当前指针位置:	pointer position:
FrmStoreBox_label26_Text	记录湿度值:	humidity value:
FrmStoreBox_label22_Text	记录温度值:	temperature value:
FrmStoreBox_btnSelTemp_Text	查询实时数据	Query real-time data
FrmStoreBox_label29_Text	湿度:	Humidity:
FrmStoreBox_label28_Text	温度:	Temperature:
FrmStoreBox_label27_Text	端口号:	Port number:
FrmStoreBox_btnTempClose_Text	断开	Disconnect
FrmStoreBox_btnTempInit_Text	初始化	Initialize
FrmStoreBox_groupBox3_Text	设备状态	Machine state
FrmStoreBox_lblWarnMsg_Text	FrmStoreBox_lblWarnMsg_Text	FrmStoreBox_lblWarnMsg_Text
FrmStoreBox_lblThisSta_Text	等待启动	Wait to start
FrmStoreBox_groupInout_Text	料仓操作	Operation
FrmStoreBox_lblTemp_Text	当前温度--，当前湿度--	Current temperature--& current humidity--
FrmStoreBox_lblMsg_Text	没有开启自动出入库	Auto providing not start
FrmStoreBox_btnSavePosition_Text	保存	Save position
FrmStoreBox_btnStartAuTo_Text	启动自动模式	Start auto mode
FrmStoreBox_label9_Text	入库间隔仓位:	Storage space:
FrmStoreBox_label21_Text	选择仓位:	Seletct Position:
FrmStoreBox_btnInStore_Text	入库测试	Saving testing
FrmStoreBox_btnOutStore_Text	出库测试	Outbound test
FrmStoreBox_btnComP1_Text	压紧轴待机点P1:	p-axis stanby P1:
FrmStoreBox_btnInOutP2_Text	进出轴取料点P2:	In-out axis P2:
FrmStoreBox_btnInOutP1_Text	进出轴待机点P1:	In-out axis stanby P1:
FrmStoreBox_btnMiddleP1_Text	旋转轴待机点P1:	Rotation axis stanby P1:
FrmStoreBox_btnUpDownP7_Text	升降轴入料缓冲点P7:	l-axis storing buffer P7:
FrmStoreBox_btnUpDownP8_Text	升降轴出料缓冲点P8:	l-axis providing buffer P8:
FrmStoreBox_btnUpDownP1_Text	升降轴入料点P1:	l-axis storing P1:
FrmStoreBox_btnUpDownP2_Text	升降轴出料前点P2:	l-axis providing P2:
FrmStoreBox_btnComP3_Text	压紧轴压紧前点P3:	p-axis former pressing P3:
FrmStoreBox_btnComP2_Text	压紧轴压紧点P2:	p-axis pressing P2:
FrmStoreBox_btnInOutP3_Text	进出轴取料点P3:	In-out axis P3:
FrmStoreBox_btnMiddleP2_Text	旋转轴库位点P2:	Rotation axis storage P2:
FrmStoreBox_btnUpDownP5_Text	升降轴出料前点P5:	l-axis former providing P5:
FrmStoreBox_btnUpDownP6_Text	升降轴出料缓冲点P6:	l-axis providing buffer P6:
FrmStoreBox_btnUpDownP3_Text	升降轴入料前点P3:	l-axis former storing P3:
FrmStoreBox_btnUpDownP4_Text	升降轴入料缓冲点P4:	l-axis storing buffer P4:
FrmPwd_Text	请输入密码	Enter PSW:
FrmPwd_btnNext_Text	确定	Confirm
FrmPwd_btnBack_Text	返回	Back
FrmPwd_label1_Text	请输入密码:	Enter PSW:
FrmStoreBox_groupBoxHighState_Text	高度传感器	Height Single:
FrmStoreBox_labelReelWidth_Text	料盘尺寸:	Size:
FrmStoreBox_labelReelHeight_Text	料盘高度:	Hieght:
FrmStoreBox_groupBoxDowrite_Text	DO写入	DO write
FrmStoreBox_labeladdr_Text	地址:	Servo address:
FrmStoreBox_labeltimer_Text	定时(ms):	Time(ms):
FrmStoreBox_groupBoxDolist_Text	DO列表	DO list
FrmStoreBox_groupBoxDilist_Text	DI列表	DI list
FrmStoreBox_chbTH_Text	启用气压报警	enable air alert
FrmAxisDebug_Text	料仓BOX_1 _轴点动调试	SMD BOX_1 _axis inching adjusting
FrmAxisDebug_btnCCopy_Text	复制	Copy
FrmAxisDebug_btnICopy_Text	复制	Copy
FrmAxisDebug_btnUCopy_Text	复制	Copy
FrmAxisDebug_btnMCopy_Text	复制	Copy
FrmAxisDebug_lblSpeed_Text	点动速度=0.2倍目标速度	Speed=0.2xTarget Speed
FrmAxisDebug_btnComMovej_Text	压紧轴-(向上)	Pressure axis-(up)
FrmAxisDebug_btnComMove_Text	压紧轴+(向下)	Pressure axis+(down)
FrmAxisDebug_label4_Text	（轴四）压紧轴	(Axis 4)pressure axis
FrmAxisDebug_label6_Text	实时坐标	Real time coordinate
FrmAxisDebug_label5_Text	点动速度	Inching speed
FrmAxisDebug_button1_Text	关闭	Close
FrmAxisDebug_btnInOutMovej_Text	进出轴-(后退)	In-out axis-backward
FrmAxisDebug_btnUpDownMovej_Text	升降轴-(下降)	l-axis-descent
FrmAxisDebug_btnMiddleMovej_Text	旋转轴-(逆时针)	Rotation axis- anti-clockwise
FrmAxisDebug_btnInOutMove_Text	进出轴+(前进)	In-out axis+forward
FrmAxisDebug_btnUpDownMove_Text	升降轴+(上升)	l-axis+ascent
FrmAxisDebug_btnMiddleMove_Text	旋转轴+(顺时针)	Rotation axis+clockwise
FrmAxisDebug_label3_Text	（轴三）进出轴	(Axis 3) in-out axis
FrmAxisDebug_label2_Text	（轴二）升降轴	(Axis 2) lifting axis
FrmAxisDebug_label1_Text	（轴一）旋转轴	(Axis 1) rotation axis
升降轴位置调试:	升降轴位置调试:	Updown-Axis Debug Location:
FrmPositionTool_Text	升降轴位置测试	Updown-Axis Debug Location
FrmPositionTool_groupBox6_Text		
FrmPositionTool_groupBox2_Text	位置信息	location information
FrmPositionTool_label10_Text	入料缓冲点P4偏移量:	Point P4 offset:
FrmPositionTool_label9_Text	入料前点P3偏移量:	Point P3 offset:
FrmPositionTool_label5_Text	出料缓冲点P6偏移量:	Point P6 offset:
FrmPositionTool_label4_Text	出料前点P5偏移值:	Point P5 offset:
FrmPositionTool_btnOpenFolder_Text	打开文件夹	Open the folder
FrmPositionTool_btnGetActualPosition_Text	读取位置	Update location
FrmPositionTool_label8_Text	移动速度:	Move speed:
FrmPositionTool_ioStatusControl1_Text	FrmPositionTool_ioStatusControl1_Text	FrmPositionTool_ioStatusControl1_Text
FrmPositionTool_label1_Text	label1	label1
FrmPositionTool_btnAbsMove_Text	开始运动	Start
FrmPositionTool_label3_Text	保存文件名称:	file name:
FrmPositionTool_label7_Text	实际位置:	actual position:
FrmPositionTool_label13_Text	目标位置:	target location:
FrmPositionTool_btnSdStop_Text	停止	Stop
FrmPositionTool_label6_Text	目标位置:	target location:
FrmPositionTool_groupBox1_Text	设备信息	equipment information
FrmPositionTool_label12_Text	端口号:	Port number:
FrmPositionTool_label18_Text	地址:	Servo address:
FrmPositionTool_btnHomeMove_Text	原点返回	Back to home
FrmPositionTool_btnServoOn_Text	打开伺服	Open servo
FrmPositionTool_btnServoOff_Text	关闭伺服	Close servo
FrmPositionTool_label2_Text	检测信号地址:	signal address:
FrmPositionTool_btnExit_Text	退出	Exit
FrmPositionTool_btnClear_Text	清理	Clear
检测信号	检测信号	detection signal
FrmLanguare_Text	语言设置	Language
FrmLanguare_btnCancel_Text	取消	Cancel
FrmLanguare_btnOk_Text	确定	Confirm
FrmLanguare_rbtnEnglish_Text	英文	English
FrmLanguare_rbtnChina_Text	中文	Chinese
FrmAbout_Text	软件信息	Software Info
FrmAbout_btnCopy_Text	复制编号	Copy
FrmAbout_lblCodeName_Text	软件编号:52 43 2D 44 4C 2D 41 43 53 69 6E 67 6C 65 53 74 6F 72 65	Software Number:52 43 2D 44 4C 2D 41 43 53 69 6E 67 6C 65 53 74 6F 72 65
FrmAbout_lblTime_Text	更新时间:2020-02-07 21:16	UpdateTime:2020-02-07 21:16
FrmAbout_lblVersion_Text	版本号:1.0.7342.38298	Version:1.0.7342.38298
FrmAbout_btnNext_Text	确定	Confirm
FrmStoreBox_tabPage8_Text	    库位调试    	  Storage location  
FrmStoreBox_btn_setlow_Text	关	Switch to Low
FrmStoreBox_btn_SetHigh_Text	开	Switch to High
FrmStoreBox_checkBox_Double_Alternate_Text	双盘测试	Double Alternate
Middle_Axis	（轴一）旋转轴	(Axis 1) rotation axis
UpDown_Axis	（轴二）升降轴轴	(Axis 2) lifting axis
InOut_Axis	（轴三）进出轴	(Axis 3) in-out axis
Comp_Axis	（轴四）压紧轴	(Axis 4)pressure axis
启用调试	启用调试	Enable debugging
等待启动	等待启动	Wait to start
前门未关	前门未关	Front door open
叉子料盘检测有料，请检查	叉子料盘检测有料，请检查	Fork tray full& please check
开始自动出入库	开始自动出入库	Start auto storing
停止自动出入库	停止自动出入库	Stop auto storing
自动出库:	自动出库:	Auto outbound:
自动入库:	自动入库:	Auto warehousing:
定位气缸不在下降端，不能移动进出轴	定位气缸不在下降端，不能移动进出轴	The position cylinder is not at the descent position& not move the in-out axis
警告	警告	Warning
开始循环出库	开始循环出库	Start looping out
停止循环出库	停止循环出库	Stop the loop
FrmStoreBox_显示ToolStripMenuItem_Text	显示	Show
FrmStoreBox_toolStripMenuItem1_Text	退出	Exit
		
是否确定退出？	是否确定退出？	Are you sure you want to quit?
提示	提示	Remind
点动速度	点动速度	Inching speed
倍目标速度	倍目标速度	Double target speed
禁用调试	禁用调试	Disable debugging
无报警，无出入库或者重置操作时，才可以回待机点！	无报警，无出入库或者重置操作时，才可以回待机点！	No Alarm
		
inSuddenStop	收到急停信号，报警急停	Emergency stop signal received，alarm emergency stop
InoutAlarm	进出轴报警！复位失败，请检查	in-out axis alarm! Reset failed& please check
OpenAxisFail	打开轴{0}失败	Failed to open axis {0}
NoAIr	未检测到气压信号	Pressure signal undetected
AutoReset	收到复位信号，自动复位	Receive reset signal& automatical reset
AxisAlarm	运动轴{0}报警	Motion axis {0} alarm
CustAlarm	{0}	{0}
startFail	启动失败:急停未开	Startup failure: emergency stop not opened
WaitSingleTimeOut	等待信号{0}={1}超时	Wait signal {0}={1} timeout
startFailAir	启动失败:没有气压信号	Startup failure: no air pressure signal
AxisHomeMoveAlarm	运动{0}轴{1}收到原点完成信号，当前位置[{2}]，误差过大，需要报警	The movement {0} axis {1} receives the origin completion signal& the current position [{2}]& the error is too large& it needs to alarm
AxisMoveAlarm	运动{0}轴{1}目标位置[{2}]当前位置{3}误差过大，需要报警	Movement {0} axis {1} target position [{2}] current position {3} error is too large& need to alarm
MoveTimeOut	{0}]超时{1}[{2}]	{0}]Time out {1}[{2}]
WaitInstoreTimeOut	[{0}]超时[等待可以入库][{1}秒]	[{0}] timeout [wait to store][{1} seconds]
HasWare	叉子料盘检测有料，请检查	Fork tray full& please check
NoCodeMsg	未扫到二维码，请重新放入料盘	If the qr code is not scanned& please put it back into the material tray
InStoreNoCode	未扫到二维码，需要将料盘送出	The qr code is not scanned& the material plate needs to be sent out
InStoreError	入库库位格式错误:条码[{0}]库位号[{1}]	Incorrect format of the library entry: barcode [{0}] library entry number [{1}]
InStoreNoPosition	入库未找到库位:条码[{0}]库位号[{1}]	Storage location not found: barcode [{0}] storage location [{1}]
OutStoreError	出库格式错误{0}	Providing format error{0}
OutStoreNoPosition	出库未找库位:{0}	Storage location not found :{0}
HomeMove	原点返回	Back to home
AbsMove	绝对运动	Abosolute move
WaitIo	IO信号等待	IO wait
WaitTime	时间等待:	Time to wait:
TargetPosition	电钢目标位置:	Target position of electric steel:
trayHeight	料盘高度	Reel height
请先启动料仓！	请先启动料仓！	Please start the system！
保存位置失败！	保存位置失败！	Save position Fail!
警告（叉子在待机位时，才能移动升降轴和旋转轴）	警告（叉子在待机位时，才能移动升降轴和旋转轴）	Warn(move the lifting and rotating axis only when the gripper is stanby)
叉子不在待机位，请先将叉子退回待机位	叉子不在待机位，请先将叉子退回待机位	Gripper not stanby& return the gripper to standby
确定开始自动出入库？	确定开始自动出入库？	Make sure to start automatic storage ？
请输入正确的密码	请输入正确的密码	Enter the right PSW
打开串口失败	打开串口失败	Failed to open serial port
请输入正确的速度	请输入正确的速度	Please enter the correct speed
自动出库：	自动出库：	Auto outbound：
自动入库：	自动入库：	Auto warehousing：
升降轴位置调试：	升降轴位置调试：	Updown-Axis Debug Location
关闭DEBUG	关闭DEBUG	Close DEBUG
开启DEBUG	开启DEBUG	Open DEBUG
出库{0}叉子从库位退出后，未检测到料盘有料	出库{0}叉子从库位退出后，未检测到料盘有料	Outgoing {0} after the fork exits from the storage，no material on the tray is detected
左侧门未关	左侧门未关	Left door open
右侧门未关	右侧门未关	Right door open
FrmStoreBox_chbIsDebug_Text	调试状态	debug mode
光栅被遮挡	光栅被遮挡	Grating blocked
InTrouble	故障中	In trouble
OutStoreBoxEnd	料盘出仓位完成	Providing executed
OutStoreExecute	出库执行中	Providing Executing
StoreOnline	设备联机	System online
SuddenStop	急停中	Emergency stop
OutMoveExecute	出库完成	Providing Executed
InStoreFailed	入库失败	Saving failed
OutStoreFailed	出库失败	Providing failed
WaitSingle	等待信号	Wait signal
TimeOut	超时	Time out
Run	运行中	Runing
Runing	运行中	Runing
OutStorEnd	出库完成	OutStorEnd
FrmStoreBox_btnCloseDLed_Text	关闭设备照明	Turn off lighting
FrmStoreBox_btnOpenDLed_Text	打开设备照明	Turn on lighting
FrmStoreBox_btnOpenAutoInOut_Text	开启自动出入库	 start auto storage and retrieval
FrmStoreBox_btnHul_Text	忽略夹爪检测信号	Ignore the gripper detection signal
FrmStoreBox_lblTempStr_Text	FrmStoreBox_lblTempStr_Text	FrmStoreBox_lblTempStr_Text
FrmStoreBox_btnCDLed_Text	关闭设备照明	Turn off equipment lighting
FrmStoreBox_btnDevideLed_Text	打开设备照明	Turn on equipment lighting
FrmStoreBox_chbOpenLog_Text	显示日志	Open Log
FrmStoreBox_tabPage7_Text	  设备状态  	  Machine state  
		
		
X00	急停	Emergency stop
X01	复位	Reset
X02	启动	Auto
X03	氮气气压检测	Pressure detection
X04	料盘检测1（进料口）	Tray check 1
X05	料盘检测2（料叉）	Tray check 2
X06	进料口门上升端	Portal ascent position
X07	进料口门下降端	Portal descent position
X08	安全光栅	Security grating
X09	前门限位	front door limit
X10	左侧门限位	Left side threshold
X11	右侧门限位	Right hand threshold
X12	激光对点检测	Laser point detection
X13	进料口电机异常	Portal motor abnormal
Y00	自动指示灯	Auto indicator light
Y01	故障指示灯	Error indicator light
Y02	待机指示灯	Indicator light
Y03	故障蜂鸣器	Fault buzzer
Y04	设备照明开启	System light ON
Y05	相机光源开启	Camera light ON
Y06	氮气阀门开启	Nitrogen valve open
Y07	进料口门运转	Portal door operation
Y08	进料口门反转关门	Portal door reverse close
Y11	设备照明开	Equipment lighting on
		
FrmStoreBox_groupBox2_Text	轴状态监控	Axis status monitor
FrmStoreBox_lblAlarmcode_Text	错误码:	Wrong code:
FrmStoreBox_lblINP_Text	到位	Ready
FrmStoreBox_lblBUSY_Text	忙碌	Busy
FrmStoreBox_lblNEL_Text	负极限	Negative limit
FrmStoreBox_lblORG_Text	原点	Origin
FrmStoreBox_lblPEL_Text	正极限	Positive limit
FrmStoreBox_lblSvOn_Text	伺服	Servo
FrmStoreBox_lblEMG_Text	急停	Emergency stop
FrmStoreBox_lblWARN_Text	警告	Warning
FrmStoreBox_lblALM_Text	报警	Alarm
FrmStoreBox_label53_Text	规划速度:	Planning speed:
FrmStoreBox_label56_Text	实际速度:	Actual speed:
FrmStoreBox_label55_Text	实际位置:	Actual location:
FrmStoreBox_label52_Text	规划位置:	Planning location:
FrmStoreBox_label50_Text	规划模式:	Planning mode:
FrmStoreBox_linkLabel1_Text	复制	Copy
FrmStoreBox_btnDelMove_Text	点动- 	Jogging-
FrmStoreBox_btnAddMove_Text	点动+ 	Jogging+
		
		
AxisTipControl_btn_cancel_Text	取消	Back
AxisTipControl_btn_ok_Text	确定	Confirm
AxisTipControl_btnDelMove_Text	点动- 	Jogging-
AxisTipControl_btnAddMove_Text	点动+ 	Jogging+
AxisTipControl_label_position_Text	当前位置：	Actual position:
AxisTipControl_label_speed_Text	点动速度：	Inching speed
		
		
safety_grating_covered	"开门时安全光栅被遮挡,料仓暂停运行."	"The safety grating is blocked when opening the door, SMD BOX stoped. "
take_out_reel_failure	"料叉没有成功取出料盘,请检查库位[{0}],取出料盘后请复位."	"Take out reel failure. Please check the position [{0}], take out the reel manually, and reset."