Skip to content

刘韬 / UILanguageTooles

转到一个项目
切换导航栏
切换导航栏固定状态
Commit d9e7aa8e 由 刘韬
选项

添加新翻译

1 个父辈 a16a4ac5
内嵌 并排
正在显示 6 个修改的文件 包含 928 行增加 和 452 行删除
UILanguageTooles.zip deleted 100644 → 0
此文件类型无法预览
UILanguageTooles/Form1.cs
......@@ -49,8 +49,10 @@ namespace UILanguageTooles
if (h.Length == 0)
return;
var d = new string[3];
for (int i = 0; i < 2; i++)
{
for (int i = 0; i < 3; i++)
{
if (i == 2 && h.Length < 3)
break;
d[i] = h[i];
}
if (!string.IsNullOrWhiteSpace(d[1]) && string.IsNullOrEmpty(d[2]))
......@@ -170,6 +172,8 @@ namespace UILanguageTooles
keyid=keyid.Substring(2);
if (!codeidlist.ContainsKey(keyid))
codeidlist.Add(keyid, gtxt);
else if (codeidlist[keyid]!= gtxt)
result.AppendLine("\t\tDupLine:"+ codeidlist[keyid]+"\t" + gtxt + "\t" + re);
}
else {
hasChange = true;
......@@ -269,7 +273,7 @@ namespace UILanguageTooles
/// <summary>
/// 代码行中包含以下文本不转换
/// </summary>
static string[] excludeline = new string[] {"throw", "LogUtil", ".log" , "LOGGER.", "LOGGER.", " const ", "OutDebug","VLog." };
static string[] excludeline = new string[] {"throw", "LogUtil", ".log" , "LOGGER.", "LOGGER.", " const ", "OutDebug","VLog.", ".Info", ".Error", "AppSetting.", "Log.Warn", ".errlog" };
private void Form1_Load(object sender, EventArgs e)
{
......
UILanguageTooles/Library/en-US/10.lngres
AboutBox1_tableLayoutPanel_labelCompanyName_Text 上海挚锦科技有限公司 Neotel Technology Co., Ltd
AboutBox1_tableLayoutPanel_okButton_Text 确定 Confirm
AxisMoveControl_groupAxis_groupBox2_label2_Text 实际加速度: Acceleration:
AxisMoveControl_groupAxis_groupBox2_label4_Text 回原状态: Home Status:
AxisMoveControl_groupAxis_groupBox2_label50_Text 规划模式: Preset Mode:
AxisMoveControl_groupAxis_groupBox2_label52_Text 规划位置: Preset Position:
AxisMoveControl_groupAxis_groupBox2_label53_Text 规划速度: Preset Speed:
AxisMoveControl_groupAxis_groupBox2_label55_Text 实际位置: Actual Location:
AxisMoveControl_groupAxis_groupBox2_label56_Text 实际速度: Actual Speed:
AxisMoveControl_groupAxis_groupBox2_lblALM_Text 报警 Alarm
AxisMoveControl_groupAxis_groupBox2_lblBUSY_Text 忙碌 Busy
AxisMoveControl_groupAxis_groupBox2_lblEMG_Text 急停 E-Stop
AxisMoveControl_groupAxis_groupBox2_lblINP_Text 到位 Ready
AxisMoveControl_groupAxis_groupBox2_lblNEL_Text 负极限 Lower Limit
AxisMoveControl_groupAxis_groupBox2_lblORG_Text 原点 Home Position
AxisMoveControl_groupAxis_groupBox2_lblPEL_Text 正极限 Upper Limit
AxisMoveControl_groupAxis_groupBox2_lblSvOn_Text 伺服 Servo
AxisMoveControl_groupAxis_groupBox2_lblWARN_Text 警告 Warning
AxisMoveControl_groupAxis_groupBox2_Text 状态监控 Status Monitor
AxisMoveControl_groupAxis_panel1_btnAddMove_Text 点动+ Increase
AxisMoveControl_groupAxis_panel1_btnAxisAMove_Text 绝对运动 Abosolute Motion
AxisMoveControl_groupAxis_panel1_btnAxisReturnHome_Text 原点返回 Back to Origin
AxisMoveControl_groupAxis_panel1_btnAxisRMove_Text 相对运动 Relative Motion
AxisMoveControl_groupAxis_panel1_btnAxisStop_Text 停止运动 Stop Running
AxisMoveControl_groupAxis_panel1_btnAxisVMove_Text 匀速运动 Uniform Motion
AboutBox1_tableLayoutPanel_okButton_Text 确定 OK
AxisMoveControl_groupAxis_groupBox2_label2_Text 实际加速度: Acc:
AxisMoveControl_groupAxis_groupBox2_label4_Text 回原状态: BTOStatus:
AxisMoveControl_groupAxis_groupBox2_label50_Text 规划模式: SetMode:
AxisMoveControl_groupAxis_groupBox2_label52_Text 规划位置: SetPos:
AxisMoveControl_groupAxis_groupBox2_label53_Text 规划速度: SetVel:
AxisMoveControl_groupAxis_groupBox2_label55_Text 实际位置: ActLoc:
AxisMoveControl_groupAxis_groupBox2_label56_Text 实际速度: ActVel:
AxisMoveControl_groupAxis_groupBox2_lblALM_Text 报警 Alarm:
AxisMoveControl_groupAxis_groupBox2_lblBUSY_Text 忙碌 Busy:
AxisMoveControl_groupAxis_groupBox2_lblEMG_Text 急停 E-Stop:
AxisMoveControl_groupAxis_groupBox2_lblINP_Text 到位 Ready:
AxisMoveControl_groupAxis_groupBox2_lblNEL_Text 负极限 NegLim:
AxisMoveControl_groupAxis_groupBox2_lblORG_Text 原点 Origin:
AxisMoveControl_groupAxis_groupBox2_lblPEL_Text 正极限 PosLim:
AxisMoveControl_groupAxis_groupBox2_lblSvOn_Text 伺服 Servo:
AxisMoveControl_groupAxis_groupBox2_lblWARN_Text 警告 Warning:
AxisMoveControl_groupAxis_groupBox2_Text 轴状态监控 Axis Status Monitoring
AxisMoveControl_groupAxis_panel1_btnAddMove_Text 点动+ Jog+
AxisMoveControl_groupAxis_panel1_btnAxisAMove_Text 绝对运动 Absolute Motion
AxisMoveControl_groupAxis_panel1_btnAxisReturnHome_Text 原点返回 Rtn to Origin
AxisMoveControl_groupAxis_panel1_btnAxisRMove_Text 相对运动 Rel Motion
AxisMoveControl_groupAxis_panel1_btnAxisStop_Text 停止运动 Stop Motion
AxisMoveControl_groupAxis_panel1_btnAxisVMove_Text 匀速运动 ConstVM
AxisMoveControl_groupAxis_panel1_btnCloseAxis_Text 关闭伺服 Servo OFF
AxisMoveControl_groupAxis_panel1_btnComAlarmClear_Text 清除报警 Clear Alarm
AxisMoveControl_groupAxis_panel1_btnDelMove_Text 点动- Decrease
AxisMoveControl_groupAxis_panel1_btnDelMove_Text 点动- Jog-
AxisMoveControl_groupAxis_panel1_btnOpenAxis_Text 打开伺服 Servo ON
AxisMoveControl_groupAxis_panel1_cmbAxis_Text 旋转轴 Rotating axis
AxisMoveControl_groupAxis_panel1_label1_Text 点动速度： Speed Per Step:
AxisMoveControl_groupAxis_panel1_btnStopM_Text 平滑停止 SmthStop
AxisMoveControl_groupAxis_panel1_button1_Text 减速测试 DecelTest
AxisMoveControl_groupAxis_panel1_label1_Text 点动速度： Jog Velocity
AxisMoveControl_groupAxis_panel1_label45_Text 端口号: Port:
AxisMoveControl_groupAxis_panel1_label46_Text 地址: Add:
AxisMoveControl_groupAxis_panel1_label47_Text 目标速度: Target Speed
AxisMoveControl_groupAxis_panel1_label48_Text 目标位置: Set Location:
AxisMoveControl_groupAxis_panel1_label46_Text 地址: Address:
AxisMoveControl_groupAxis_panel1_label47_Text 目标速度: TgtVel
AxisMoveControl_groupAxis_panel1_label48_Text 目标位置: TgtLoc
AxisMoveControl_groupAxis_panel1_label49_Text AC伺服: AC Servo:
AxisMoveControl_groupAxis_panel1_label8_Text 实时位置: Real time Position:
AxisMoveControl_groupAxis_panel1_label8_Text 实时位置: Real-time Position
AxisMoveControl_groupAxis_panel1_likUpdateP_Text 更改 Change
AxisMoveControl_groupAxis_panel1_linkLabel1_Text 复制 Copy
AxisMoveControl_groupAxis_Text 伺服运动 Servo Motion
ConfigControl_btnSavePos_Text 全部保存 Save All
ConfigControl_groupBox3_Text 点位列表 Position List
Form1_tabc_tab_axis__AxisControl_panel1_brn_3linerun_Text 3条皮带等截距运转一次 3 belts equal pitch once
Form1_tabc_tab_axis__AxisControl_panel1_btn_2linerev_Text 2条皮带等截距反转一次 2 belts equal pitch reverse once
Form1_tabc_tab_axis_Text 伺服调试 Servo Diagnostic
Form1_tabc_tab_io__IOControls_panel1_button1_Text Y38 滚筒正转 Conveyor Roller Clockwise
Form1_tabc_tab_io__IOControls_panel1_button2_Text Y39 滚筒反转 Conveyor Roller Counter Clockwise
Form1_tabc_tab_io__IOControls_panel1_button3_Text Y38 滚筒停止 Conveyor Roller Stop
Form1_tabc_tab_io__IOControls_panel1_button4_Text Y42 滚筒正转 Conveyor Roller Clockwise
Form1_tabc_tab_io__IOControls_panel1_button5_Text Y43 滚筒反转 Conveyor Roller Counter Clockwise
Form1_tabc_tab_io__IOControls_panel1_button6_Text Y42 滚筒停止 Conveyor Roller Stop
Form1_tabc_tab_io__IOControls_panel1_rfidControl1_groupBox_rfid_button_read_Text 读取 Read
Form1_tabc_tab_io__IOControls_panel1_rfidControl2_groupBox_rfid_button_read_Text 读取 Read
Form1_tabc_tab_io_Text IO调试 I/O Diagnostic
Form1_tabc_tab_setting__SettingControl_panel1_cb_EnableBuzzer_Text 使用蜂鸣器 Enable Buzzer
Form1_tabc_tab_setting__SettingControl_panel1_cb_IgnoreSafecheck_Text 忽略安全光栅 Skip safety light curtain.
Form1_tabc_tab_setting__SettingControl_panel1_fixtureSizeConfigControl1_button2_Text 删除 Delete
Form1_tabc_tab_setting__SettingControl_panel1_fixtureSizeConfigControl1_groupBox_add_button1_Text 添加/修改 Add/Edit
Form1_tabc_tab_setting__SettingControl_panel1_fixtureSizeConfigControl1_groupBox_add_checkBox_fixtureheight_Text 使用治具物理高度(毫米) Carrier Thickness(mm)
Form1_tabc_tab_setting__SettingControl_panel1_fixtureSizeConfigControl1_groupBox_add_checkBox_useedremove_Text 弃用条码 Discard Material Code
Form1_tabc_tab_setting__SettingControl_panel1_fixtureSizeConfigControl1_groupBox_add_label_startword_Text 名称: Name:
Form1_tabc_tab_setting__SettingControl_panel1_fixtureSizeConfigControl1_groupBox_add_label_wxh_Text 对应直径x厚度(毫米): DiameterxThickness(mm)
Form1_tabc_tab_setting__SettingControl_panel1_fixtureSizeConfigControl1_groupBox_add_Text 添加或修改 Add/Edit
Form1_tabc_tab_setting__SettingControl_panel1_uC_SetUserPassword1_groupBox1_button_ok_Text 确认修改 Confirm Change
Form1_tabc_tab_setting__SettingControl_panel1_uC_SetUserPassword1_groupBox1_label_newpwd_Text 新密码: New Password:
Form1_tabc_tab_setting__SettingControl_panel1_uC_SetUserPassword1_groupBox1_label_newpwd2_Text 重复新密码: Repeat The New Password:
Form1_tabc_tab_setting__SettingControl_panel1_uC_SetUserPassword1_groupBox1_label_oldpwd_Text 旧密码: Old Password:
Form1_tabc_tab_setting__SettingControl_panel1_uC_SetUserPassword1_groupBox1_Text 管理密码设置 Manage Password
Form1_tabc_tab_setting__SettingControl_tabControl1_tabPage_ledtower_Text 灯塔设置 Signal Tower Setting
Form1_tabc_tab_setting__SettingControl_tabControl1_tabPage_set_Text 常规设置 General setting
Form1_tabc_tab_setting__SettingControl_tabControl1_tabPage_set_tp_chbAutoRun_Text 开机自启动 Auto Power On
Form1_tabc_tab_setting__SettingControl_tabControl1_tabPage1_Text 治具设置 Carrier Setting
Form1_tabc_tab_setting_Text 治具设置 Carrier Setting
Form1_tabc_tab_store__uc_boxdebug_panel1_groupInout_btnInStore_Text 移库测试 Location Changing Test
Form1_tabc_tab_store__uc_boxdebug_panel1_groupInout_cb_inoutdebugmode_Text 出入库调试模式 Auto Cycle Test Mode
Form1_tabc_tab_store__uc_boxdebug_panel1_groupInout_comboBox_from_Text DoorL3 (流水线放料点) DoorL3 (MT Putting Position)
Form1_tabc_tab_store__uc_boxdebug_panel1_groupInout_comboBox_to_Text DoorL3 (流水线放料点) DoorL3 (MT Putting Position)
Form1_tabc_tab_store__uc_boxdebug_panel1_groupInout_label_from_Text 取料点: Picking Point:
Form1_tabc_tab_store__uc_boxdebug_panel1_groupInout_label_to_Text 放料点: Putting Point:
Form1_tabc_tab_store__uc_boxdebug_panel1_groupInout_Text 设备操作 Operation
Form1_tabc_tab_store_Text 位置调试 Location Calibration
Form1_tabc_tabP1_pnl_btn_ngdoorlock_Text NG料口门 NG Door
Form1_tabc_tabP1_pnl_btn_PauseBuzzer_Text 本次暂停警报器响声 Stop Alarm
Form1_tabc_tabP1_pnl_button_L1_instore_Text L1切换为入库料架 L1 Switch to Loading Magazine
Form1_tabc_tabP1_pnl_button_L1_out_Text 立刻退出L1料架 Immediately exit L1 shelf
Form1_tabc_tabP1_pnl_button_L1_outstore_Text L1切换为出库料架 L1 Switch to Unloading Magazine
Form1_tabc_tabP1_pnl_button_L2_instore_Text L2切换为入库料架 L2 Switch to Loading Magazine
Form1_tabc_tabP1_pnl_button_L2_out_Text 立刻退出L2料架 Immediately exit L2 shelf
Form1_tabc_tabP1_pnl_button_L2_outstore_Text L2切换为出库料架 L2 Switch to Unloading Magazine
Form1_tabc_tabP1_pnl_groupBox1_Text 运行状态 Status
Form1_tabc_tab_hc__HistoryControl_panel1_rb_datafilter_custom_Text 自定义区间 Custom Interval
Form1_tabc_tab_hc__HistoryControl_panel1_rb_datafilter_last30_Text 最近30天 Last 30 Days
Form1_tabc_tab_hc__HistoryControl_panel1_rb_datafilter_lastMonth_Text 上月 Last Month
Form1_tabc_tab_hc__HistoryControl_panel1_rb_datafilter_thismonth_Text 本月 This Month
Form1_tabc_tab_hc__HistoryControl_panel1_rb_datafilter_today_Text 今天 Today
Form1_tabc_tab_hc_Text 点料历史 Counting History
Form1_tabc_tab_io_Text IO调试 IO Diagnostic
Form1_tabc_tab_setting__SettingControl_cb_autorun_Text 开机自启动 Auto Power On
Form1_tabc_tab_setting__SettingControl_cb_EnableBuzzer_Text 使用蜂鸣器 Enable buzzer
Form1_tabc_tab_setting__SettingControl_gp_xraytest_btn_Calibration_Text X光成像器标定 X-ray Imager Calibration
Form1_tabc_tab_setting__SettingControl_gp_xraytest_btn_closexray_Text 关闭X光 X-ray Off
Form1_tabc_tab_setting__SettingControl_gp_xraytest_btn_openxray_Text 打开X光 X-ray On
Form1_tabc_tab_setting__SettingControl_gp_xraytest_btn_takephoto_Text 拍照 Capture
Form1_tabc_tab_setting__SettingControl_gp_xraytest_buttonmunial_Text 手动点料 Manual Counting
Form1_tabc_tab_setting__SettingControl_gp_xraytest_Text X光调试 X-ray Diagnostic
Form1_tabc_tab_setting__SettingControl_groupBox1_btn_labeledit_Text 标签编辑 Edit Label
Form1_tabc_tab_setting__SettingControl_groupBox1_btn_printertest_Text 打印测试 Print Test
Form1_tabc_tab_setting__SettingControl_groupBox1_label2_Text 标签名 Label Name
Form1_tabc_tab_setting__SettingControl_groupBox1_Text 打印设置 Print Settings
Form1_tabc_tab_setting__SettingControl_uC_SetUserPassword1_groupBox1_button_ok_Text 确认修改 Confirm Modification
Form1_tabc_tab_setting__SettingControl_uC_SetUserPassword1_groupBox1_label_newpwd_Text 新密码: New Password:
Form1_tabc_tab_setting__SettingControl_uC_SetUserPassword1_groupBox1_label_newpwd2_Text 重复新密码: Repeat New Password:
Form1_tabc_tab_setting__SettingControl_uC_SetUserPassword1_groupBox1_label_oldpwd_Text 旧密码: Old Password:
Form1_tabc_tab_setting__SettingControl_uC_SetUserPassword1_groupBox1_Text 管理密码设置 Manage Password
Form1_tabc_tab_setting_Text 相关设置 Related Settings
Form1_tabc_tabP1_pnl_btn_IgnoreX09_Text 忽略X23错误,并继续运行 Ignore x23 Error and Continue
Form1_tabc_tabP1_pnl_btn_PauseBuzzer_Text 本次暂停警报器响声 Pause Alarm
Form1_tabc_tabP1_pnl_cb_EnableBuzzer_Text 使用蜂鸣器 Enable Buzzer
Form1_tabc_tabP1_pnl_cb_IgnoreGratingSignal_Text 忽略安全光栅 Ignore Safety Grating
Form1_tabc_tabP1_pnl_cb_IgnoreSafecheck_Text 忽略安全检查(含安全光栅) Ignore Safety Check (including Safety Grating).
Form1_tabc_tabP1_pnl_groupBox1_Text 运行状态 Operating Status
Form1_tabc_tabP1_pnl_groupBox2_Text 料盘数据 Reel Data
Form1_tabc_tabP1_pnl_uC_test1_button1_Text 模拟入料 Simulated Loading
Form1_tabc_tabP1_Text 信息 Info.
FormR_tabc_tab_axis_Text 伺服调试 Servo Diagnostic
FormR_tabc_tab_io__IOControlsR_panel1_btn_sucker_release_Text 吸盘释放 Vacuum Gripper Release
FormR_tabc_tab_io__IOControlsR_panel1_button1_Text Y06 滚筒正转 Conveying Roller Clockwise
FormR_tabc_tab_io__IOControlsR_panel1_button2_Text Y07 滚筒反转 Conveying Roller Counter Clockwise
FormR_tabc_tab_io__IOControlsR_panel1_button3_Text Y06 滚筒停止 Conveying Roller Stop
FormR_tabc_tab_io__IOControlsR_panel1_button4_Text Y10 滚筒正转 Conveying Roller Clockwise
FormR_tabc_tab_io__IOControlsR_panel1_button5_Text Y11 滚筒反转 Conveying Roller Counter Clockwise
FormR_tabc_tab_io__IOControlsR_panel1_button6_Text Y10 滚筒停止 Conveying Roller Stop
FormR_tabc_tab_io__IOControlsR_panel1_rfidControl1_groupBox_rfid_button_read_Text 读取 Read
FormR_tabc_tab_io__IOControlsR_panel1_rfidControl2_groupBox_rfid_button_read_Text 读取 Read
FormR_tabc_tab_io_Text IO调试 I/O Diagnostic
FormR_tabc_tab_store__uc_boxdebug_panel1_groupInout_btnInStore_Text 移库测试 Location Changing Test
FormR_tabc_tab_store__uc_boxdebug_panel1_groupInout_cb_inoutdebugmode_Text 出入库调试模式 Auto Cycle Test Mode
FormR_tabc_tab_store__uc_boxdebug_panel1_groupInout_comboBox_from_Text DoorR1 (R1口取料点) DoorL3 (R1 Loading Position)
FormR_tabc_tab_store__uc_boxdebug_panel1_groupInout_comboBox_to_Text DoorR1 (R1口取料点) DoorL3 (R1 Loading Position)
FormR_tabc_tab_store__uc_boxdebug_panel1_groupInout_label_from_Text 取料点: Picking Point:
FormR_tabc_tab_store__uc_boxdebug_panel1_groupInout_label_to_Text 放料点: Putting Point:
FormR_tabc_tab_store__uc_boxdebug_panel1_groupInout_Text 设备操作 Operation
FormR_tabc_tab_store_Text 位置调试 Location Calibration
FormR_tabc_tabP1_pnl_btn_ngdoorlock_Text NG料口门 NG Door
FormR_tabc_tabP1_pnl_btn_PauseBuzzer_Text 本次暂停警报器响声 Stop Alarm
FormR_tabc_tabP1_pnl_button_R1_release_Text 释放R1料串 Realse R1 Stacker
FormR_tabc_tabP1_pnl_button_R2_release_Text 释放R2料串 Realse R2 Stacker
FormR_tabc_tabP1_pnl_groupBox1_Text 运行状态 Status
FormR_tabc_tabP1_Text 信息 Info.
FormStart_panel1_button_exit_Text 退出 Exit
FormStart_panel1_button_start_Text 全部启动 Start All
FormStart_panel1_button_stop_Text 全部停止 Stop All
FrmCodeDecode_btnAn_Text 变暗 Darken
FrmCodeDecode_btnbarCode_Text 一维码识别 1D Code Recognition
FrmCodeDecode_btnCameraImage_Text 相机获取图片 Camera Image
FrmCodeDecode_btnClearLog_Text 清理日志 Clear Log
FrmCodeDecode_btnCopyN_Text 复制名称 Copy Name
FrmCodeDecode_btnDCode_Text 二维码识别 2D Code Recognition
FrmCodeDecode_btnErZhi_Text 二值化 Binaryzation 
FrmCodeDecode_btnExit_Text 退出 Exit
FrmCodeDecode_btnGray_Text 图像转灰 Turning Grey
FrmCodeDecode_btnLearn_Text 学习 Learn
FrmCodeDecode_btnLight_Text 提亮 Brighten
FrmCodeDecode_btnScanTest_Text 新算法解码 New Algorithm Decoding
FrmCodeDecode_btnSelImage_Text 打开本地图片 Open Local Image
FrmCodeDecode_chbUseParam_Text 使用参数 Use Parameter
FrmCodeDecode_label1_Text 图片路径 Image Path
FrmCodeDecode_label2_Text 相机列表： Camera List:
FrmCodeDecode_label3_Text 条码类型： Code type:
FrmCodeDecode_label4_Text 参数路径 Parameter Path
FrmCodeDecode_lblCount_Text 条码数量： Code Number:
FrmCodeDecode_Text 二维码识别 2D Code Recognition
FrmCodeLearn_btnClearLog_Text 清理日志 Clear Log
FrmCodeLearn_btnDelOld_Text 删除旧参数 Delete Old Parameter
FrmCodeLearn_btnExit_Text 退出 Exit
FrmCodeLearn_btnOpen_Text 开始学习 Start Learning
FrmCodeLearn_btnSelImage_Text 打开本地图片 Open Local Image
FrmCodeLearn_btnStop_Text 结束学习 Stop Learning
FrmCodeLearn_chbHalcon_Text Halcon获取图片 Halcon Photo Capture
FrmCodeLearn_chbTest_Text 学习结束自动识别测试 Automatic Identification Test
FrmCodeLearn_chbUseCamera_Text 相机获取实时图片 Camera Image
FrmCodeLearn_label1_Text 相机： Camera:
FrmCodeLearn_label2_Text 类型： Type:
FrmCodeLearn_label3_Text 参数路径 Parameter Path
FrmCodeLearn_label4_Text 图片路径 Image Path
FrmCodeLearn_lblCount_Text 条码数量： Code Number:
FrmCodeLearn_Text 条码参数学习 Code Parameter Learning
FrmPassCheck_btn_cancel_Text 取消 Cancel
FrmPassCheck_btn_ok_Text 确定 Confirm
FrmPassCheck_FrmPassCheck_Text 请输入密码 Enter PSW:
IDHIKCamera.FrmTest_btnExit_Text 关闭 OFF
IDHIKCamera.FrmTest_btnIDHIKTest_Text IDHIK扫码测试 IDHIK Scan test
IDHIKCamera.FrmTest_btnStop_Text 停止测试 Stop scan
IDHIKCamera.FrmTest_checkBox1_Text 循环测试 Circulate test
IDHIKCamera.FrmTest_lblCodeInfo_Text 扫到条码信息: Scan result:
IOControl_groupBox1_btnCloseDO_Text 关闭 OFF
IOControl_groupBox1_btnOpenDo_Text 打开 ON
IOControl_groupBox1_label14_Text 地址: Add:
IOControl_groupBox1_label5_Text 定时(ms): Time(ms):
IOControl_groupBox1_Text DO写入 DO Write
IOControl_groupBox1_label14_Text 地址: Address:
IOControl_groupBox1_label5_Text 定时(ms): Timing(ms)
IOControl_groupBox1_Text DO写入 DO Writing
IOControl_groupBox3_Text DI列表 DI List
IOControl_groupBox4_Text DO列表 DO List
menuStrip1_关于ToolStripMenuItem_Text 关于 About
menuStrip1_设备操作ToolStripMenuItem_Text 设备操作 Operation
menuStrip1_条码识别调试ToolStripMenuItem_Text 条码识别调试 Code Recognition Diagnostic
menuStrip1_设备操作ToolStripMenuItem_Text 设备操作 Operations
menuStrip1_语言toolStripMenuItem_Text 语言 Language
StorePosControl_btnSavePos_Text 保存 Save
操作ToolStripMenuItem_全部启动ToolStripMenuItem_Text 全部启动 Start All
操作ToolStripMenuItem_全部停止ToolStripMenuItem_Text 全部停止 Stop All
设备操作ToolStripMenuItem_btn_run_Text 启动 Start
PrintLabel.FrmLabel_BtnFieldAdd_Text 字段添加 Add Field
PrintLabel.FrmLabel_BtnFieldDel_Text 字段删除 Delete Field
PrintLabel.FrmLabel_BtnFieldFont_Text 字段字体 Field Font
PrintLabel.FrmLabel_BtnLabelDel_Text 删除 Delete
PrintLabel.FrmLabel_BtnLabelNew_Text 新建 New
PrintLabel.FrmLabel_BtnPrintTest_Text 打印测试 Print Test
PrintLabel.FrmLabel_BtnRename_Text 重命名 Rename
PrintLabel.FrmLabel_BtnSave_Text 保存 Save
PrintLabel.FrmLabel_groupBox1_Text 字段说明 Field Description
PrintLabel.FrmLabel_label_labelsize_Text 标签尺寸: Label Size:
PrintLabel.FrmLabel_label5_Text 高: Height:
PrintLabel.FrmLabel_label6_Text 宽: Width:
设备操作ToolStripMenuItem_btn_stop_Text 停止 Stop
设备操作ToolStripMenuItem_操作ToolStripMenuItem_Text 操作 Operation
设备操作ToolStripMenuItem_禁用蜂鸣器ToolStripMenuItem_Text 禁用蜂鸣器 Disable Buzzer
设备操作ToolStripMenuItem_点料算法匹配ToolStripMenuItem_Text 点料算法匹配 Counting Algorithm Match
设备操作ToolStripMenuItem_二维码识别调试ToolStripMenuItem_Text 二维码识别调试 2D Code Recognition Calibration
设备操作ToolStripMenuItem_退出ToolStripMenuItem_Text 退出 Exit
中文 英文
Alarm_Buzzer 故障蜂鸣器（L侧设备） Error Buzzer(L)
Alarm_Led 故障指示灯（L侧设备） Error Indicator(L)
Batch_OutPlateDownMM 出库时每盘料补偿mm Add Additional Thickness(mm) During Retrieval Process.
Batch_OutStoreDownMM 出库时初始下降mm Initial Down(mm) During Retrieval Process
Batch_P1 R1上料提升机构待机点P1 Lifting Axis P1(R1/Standby)
Batch_P2 R1上料提升机构上料高点P2 Lifting Axis P2(R1/Upward)
Batch_P3 R2上料提升机构待机点P3 Lifting Axis P3(R1/Standby)
Batch_P4 R2上料提升机构上料高点P4 Lifting Axis P4(R1/Upward)
Batch_PoToMM 上料提升机构高度转换系数 Lifting Axis Height Convertion Factor (Batch Axis Pulse Mm)
Camera_Led 相机照明（R侧设备） Camera Lighting(R)
Comp_Axis 压紧轴 Compression Axis
Comp_P1 压紧轴待机点P1 Compression Axis P1(Standby)
Comp_P2 压紧轴70mm压紧点P2 Compression Axis P2(Compression 70mm)
Comp_PH_MM 压紧轴库位高点偏移毫米 Compression Axis Offset(mm)(Slot/Upward)
Comp_PoToMM 压紧轴每毫米脉冲 Compression Axis Pulse/mm
Device_Led 设备照明（R侧设备） Equipment Lighting(R1)
DI_Airpressure_Check 气压检测 Pressure Detection
DI_AutoRun_Single L侧自动模式 Auto Mode(L)
DI_ElectricDoor_Check L侧电器门禁 Door Access (L)
DI_Fixture_Comp_Check L料叉物料夹紧确认 Gripper Tight Detection(L)
DI_Fixture_Materiell_Check L料叉物料检测 Gripper Material Detection(L)
DI_GetReel_Check R取料机构料盘检测 Reel Dextion(R Horizontal Axis)
DI_L1_Front_Car_Check L1料口前端料车检测 Trolley Detection(L1 Loading Port Front)
DI_L1_Front_String_Check L1料口前端料框检测 Magazine Detection(L1 Loading Port Front)
DI_L1_Location_Down L1料口料框定位下降端 Magazine Down End(L1 Loading Port)
DI_L1_Location_Up L1料口料框定位上升端 Magazine Up End(L1 Loading Port)
DI_L1_SafetyLightCurtains L1料口光栅检测 Safety Light Curtain Detection(L1 Loading Port)
DI_L1_String_Inplace_Check L1料口料框到位检测 Magazine In Position Detection(L1 Loading Port)
DI_L2_Front_Car_Check L2料口前端料车检测 Trolley Detection(L2 Loading Port Front)
DI_L2_Front_String_Check L2料口前端料框检测 Magazine Detection(L2 Loading Port Front)
DI_L2_Location_Down L2料口料框定位下降端 Magazine Down End(L2 Loading Port)
DI_L2_Location_Up L2料口料框定位上升端 Magazine Up End(L2 Loading Port)
DI_L2_SafetyLightCurtains L2料口光栅检测 Safety Light Curtain Detection(L2 Loading Port)
DI_L2_String_Inplace_Check L2料口料框到位检测 Magazine In Position Detection(L2 Loading Port)
DI_NGDoorClose_Check L侧NG料门关闭 NG Door Close(L)
DI_NGMetrial_Check L侧NG料箱检测 NG Box Detextion(L)
DI_R1_Front_Car_Check R1料口前端料车检测 Trolley Detection(R1 Loading Port Front)
DI_R1_Front_String_Check R1料口前端料串检测 Stacker Detection(R1 Loading Port Front)
DI_R1_Location_Down R1料口料串定位下降端 Stacker Down End(L1 Loading Port)
DI_R1_Location_Up R1料口料串定位上升端 Stacker Up End(L1 Loading Port)
DI_R1_Reel_Location_Check R1料口料盘定位检测 Reel Detection(R1 Loading Port)
DI_R1_SafetyLightCurtains R1料口光栅检测 Safety Light Curtain Detection(R1 Loading Port)
DI_R1_String_Inplace_Check R1料口料串到位检测 Stacker In Position Detection(R1 Loading Port)
DI_R2_Front_Car_Check R2料口前端料车检测 Trolley Detection(R2 Loading Port Front)
DI_R2_Front_String_Check R2料口前端料串检测 Stacker Detection(R2 Loading Port Front)
DI_R2_Location_Down R2料口料串定位下降端 Stacker Down End(R2 Loading Port)
DI_R2_Location_Up R2料口料串定位上升端 Stacker Up End(R2 Loading Port)
DI_R2_Reel_Location_Check R2料口料盘定位检测 Reel Detection(R2 Loading Port)
DI_R2_SafetyLightCurtains R2料口光栅检测 Safety Light Curtain Detection(R2 Loading Port)
DI_R2_String_Inplace_Check R2料口料串到位检测 Stacker In Position Detection(R2 Loading Port)
DI_Reset_BTN L侧复位 Reset(L)
DI_Suction_Pressure_Check R取料吸盘压力检测 Material Gripper Compression Test(R1)
DI_SuddenStop_BTN L侧急停 E-stop(L)
DI_WidthCheck_13 R取料机构叉13寸料盘检测 13in Reel Detection(R Horizontal Axis)
DI_WidthCheck_15 R取料机构15寸料盘检测 15in Reel Detection(R Horizontal Axis)
DO_Alarm_Buzzer 故障蜂鸣器（L侧设备） Error Buzzer(L)
DO_Alarm_Led 故障指示灯（L侧设备） Error Indicator(L)
DO_Camera_Led 相机照明（L侧设备） Camera Lighting(L)
DO_Device_Led 设备照明（L侧设备） Equipment Lighting(L)
DO_L1_Line_Run L1料口线体正转 Conveyor Clockwise(L1 Loading Port)
DO_L1_Line_Rwd L1料口线体反转 Conveyor Counter Clockwise(L1 Loading Port)
DO_L1_Location_Down L1料口料框定位下降 Magazine Position Down(L1 Loading Port)
DO_L1_Location_Up L1料口料框定位上升 Magazine Position Up(L1 Loading Port)
DO_L2_Line_Run L2料口线体正转 Conveyor Clockwise(L2 Loading Port)
DO_L2_Line_Rwd L2料口线体反转 Conveyor Counter Clockwise(L2 Loading Port)
DO_L2_Location_Down L2料口料框定位下降 Magazine Position Down(L2 Loading Port)
DO_L2_Location_Up L2料口料框定位上升 Magazine Position Up(L2 Loading Port)
DO_NGDoor_Open L侧NG料门打开 NG Door Open(L)
DO_R1_Line_Run R1料口线体正转 Conveyor Clockwise(R1 Loading Port)
DO_R1_Line_Rwd R1料口线体反转 Conveyor Counter Clockwise(R1 Loading Port)
DO_R1_Location_Down R1料口料框定位下降 Stacker Position Down(R1 Loading Port)
DO_R1_Location_Up R1料口料框定位上升 Stacker Position Up(R1 Loading Port)
DO_R2_Line_Run R2料口线体正转 Conveyor Clockwise(R2 Loading Port)
DO_R2_Line_Rwd R2料口线体反转 Conveyor Counter Clockwise(R2 Loading Port)
DO_R2_Location_Down R2料口料框定位下降 Stacker Position Down(R2 Loading Port)
DO_R2_Location_Up R2料口料框定位上升 Stacker Position Up(R2 Loading Port)
DO_Run_Led 自动指示灯（L侧设备） Auto Indicator(L)
DO_SafetyLight_Disable L侧光栅功能解除 Safety Light Curtain Release(L)
DO_Standby_Led 待机指示灯（L侧设备） Standby Indicator(L)
DO_Sucker R取料吸盘取料 Material Gripper Picking(R)
DO_Sucker_Release R取料吸盘放料 Material Gripper Putting(R)
InOut_Axis 进出轴 Horizontal Axis
InOut_P1 进出轴待机点P1 Horizontal Axis P1(Standby)
InOutAxis_Position_P3 进出轴库位点取料点P3 Horizontal Axis P3(Slot/Picking)
IOSingle_TimerOut IO信号超时时间（秒） IO Signal Timeout (s)
L1_Line_Run L1料口线体正转 Conveyor Clockwise(L1 Loading Port)
L1_Line_Rwd L1料口线体反转 Conveyor Counter Clockwise(L1 Loading Port)
L1_Location_Down L1料口料框定位下降 Magazine Position Down(L1 Loading Port)
L1_Location_Up L1料口料框定位上升 Magazine Position Up(L1 Loading Port)
L2_Line_Run L2料口线体正转 Conveyor Clockwise(L2 Loading Port)
L2_Line_Rwd L2料口线体反转 Conveyor Counter Clockwise(L2 Loading Port)
L2_Location_Down L2料口料框定位下降 Magazine Position Down(L2 Loading Port)
L2_Location_Up L2料口料框定位上升 Magazine Position Up(L2 Loading Port)
LastTrayAddHeight 最后一盘料补充高度mm Additional Height mm
LastTrayAddHeight_R1 最后一盘料补充高度(R1)mm Additional Height mm(R1)
LastTrayAddHeight_R2 最后一盘料补充高度(R2)mm Additional Height mm(R2)
Middle_Axis 旋转轴 Rotating Axis
Middle_P1 旋转轴待机点P1 Rotating Axis P1(Standby)
NGDoor_Open L侧NG料门打开 NG Door Open(L)
NG放料点 NG放料点 NG Putting Position
NG缓存位1 NG缓存位1 NG Buffer Position1
NG缓存位2 NG缓存位2 NG Buffer Position2
NG缓存位3 NG缓存位3 NG Buffer Position3
PCB料格 PCB料格 PCB Magazine
PizzaBOX料格 PizzaBOX料格 Pizza Box Magazine
PizzaBOX扫码 PizzaBOX扫码 Pizza Box Code Scanning
R1_Batch_Axis R1上料提升机构 R1 Lifting Axis
R1_Line_Run R1料口线体正转 Conveyor Clockwise(R1 Loading Port)
R1_Line_Rwd R1料口线体反转 Conveyor Counter Clockwise(R1 Loading Port)
R1_Location_Down R1料口料串定位下降 Stacker Down End(R1 Loading Port)
R1_Location_Up R1料口料框定位上升 Stacker Position Up(R1 Loading Port)
R1口取料点 R1口取料点 R1 Picking Position
R2_Batch_Axis R2上料提升机构 R2 Lifting Axis
R2_Line_Run R2料口线体正转 Conveyor Clockwise(L2 Loading Port)
R2_Line_Rwd R2料口线体反转 Conveyor Counter Clockwise(L2 Loading Port)
R2_Location_Down R2料口料串定位下降 Stacker Down End(R2 Loading Port)
R2_Location_Up R2料口料框定位上升 Stacker Position Up(R2 Loading Port)
R2口取料点 R2口取料点 R2 Picking Position
Run_Led 自动指示灯（R侧设备） Auto Indicator(R1)
SafetyLight_Disable L侧光栅功能解除 Safety Light Curtain Release(L)
ShoeBOX料格 ShoeBOX料格 Shoe Box Magazine
Standby_Led 待机指示灯（L侧设备） Standby Indicator(L)
Sucker R取料吸盘取料 R Material Vacuum Gripper
Sucker_Release R取料吸盘放料 Picking Vacuum Gripper Realse(R)
Tray料格 Tray料格 Tray Magazine
UpDown_Axis 升降轴 Vertical Axis
UpDown_P1 升降轴待机点P1 Vertical Axis P1(Standby)
UpDown_PoToMM 升降轴每毫米脉冲 Vertical Axis Pulse/mm
UpDown_S1_Speed 升降轴低速 Vertical Axis Low Speed
UpDownAxis_IHPosition_P3 升降轴库位入料高点P3 Vertical Axis P3(Slot/Upward)
UpDownAxis_ILPosition_P4 升降轴库位入料低点P4 Vertical Axis P4(Slot/Downward)
XAxis_Position_P2 旋转轴位置P2 Rotating Axis P2
流水线放料点 流水线放料点 Conveyor Putting Position
默认扫码点 默认扫码点 Default Scanning Position
Res0001 温湿度传感器 T/H Sensor
Res0002 本机IP Local IP
Res0003 找不到监控相机配置文件 No Camera Configuration File Found
Res0004 加载监控相机配置文件失败: Fail To Load Camera Configuration File
Res0005 监控相机打开失败 Fail To Start Camera
Res0006 设备未启动 Initialization Failed
Res0007 NG料口打开 NG Door Open
Res0008 与环形线通讯连接丢失 Miss Connection with Conveyor
Res0009 按下复位按钮. Please press the reset button
Res0010 急停未解除,按下复位按钮尝试复位安全继电器. Emergency Mode Not Release. Please Press Reset To Reset Safety Relay.
Res0011 按下启动按钮,开始启动. Please press the start button
Res0012 系统正在运行. In Operation
Res0013 急停中,按下启动按钮,无法启动. The Equipment Cannot Start During Emergency Process.
Res0014 料架出入口 Material Port
Res0015 停机报警 Shut Down Alarm
Res0016 报警 Alarm
Res0017 复位 Reset
Res0018 运行 Run
Res0019 暂停 Pause
Res0020 出入库中 In Operation
Res0021 找不到库位配置文件 Material Location Configuration File Not Found
Res0022 IO板卡初始化失败 I/O Controller Initialization Failed
Res0023 打开调试模式 Start Diagnostic Mode
Res0024 重置 Reset
Res0025 库位测试 Cycle Test
Res0026 L1料口 L1 Material Door
Res0027 L2料口 L2 Material Door
Res0028 移栽机构 Automatic Material Handler
Res0029 进出轴不在待机点时无法移动升降轴 Vertical Axis Cannot Move When The Horizontal Axis Is Not Standby
Res0030 已忽略 Skip
Res0031 安全光栅被遮挡 Safety Light Curtain Is Covered.
Res0032 电气门没有关闭 Electrical Door Open
Res0033 系统暂停 Pause
Res0034 急停中 In Emergency Mode
Res0035 系统需要重置 Please Reset System
Res0036 进出库调试模式 Cycle Test Mode
Res0037 超时未检测到料架 Magazine Detection Time Out
Res0038 运动报警 Motion Alarm
Res0039 批量 Batch
Res0040 检测到有料架进入 Magazine Detected
Res0041 料架已到位 Magazine Ready
Res0042 料架放满请取走 Magazine Full. Please Take The Magazine
Res0043 当前料架 Current Magazine
Res0044 模式 Mode
Res0045 入库 In
Res0046 出库 Out
Res0047 空闲中 Available
Res0048 待确认 Wait for confirmation
Res0049 等待料车对接取走料架 Waiting for Trolley
Res0050 R1料口 R1 Material Door
Res0051 R2料口 R2 Material Door
Res0052 物料转移机构 Material Transfer Unit
Res0053 开始转移 Start Transfer
Res0054 物料出库后,料叉上没有检测到物料 No Material Detected
Res0055 未识别到有效二维码 No vaild QR code.
Res0056 状态监控 Status monitor
Res0057 已完成扫码,等待服务器反馈库位 Scanning Completed. Waiting for Feedback
Res0058 等待托盘到位 Waiting for Pallet
Res0059 通知环形线释放托盘失败 Inform Conveyor of Pallet Releasing Failure
Res0060 NG库位已满,NG料无位置可以放置,请及时取走 Ng Slots Full. Please Take The Ng Material In Time
Res0061 与环形线通讯失败 Fail To Communicate With Conveyor
Res0062 物理厚度 Actual Thickness
Res0063 自动弃用 Automatic Delete
Res0064 物料出库后,料叉上仍然检测到物料,请检查 Material Detected on Gripper. Please check
Res0065 物料出库后,料叉上仍然检测到物料 Material Detected on Gripper.
Res0066 已将物料放置到托盘 Material Ready in Pallet
Res0067 已将物料放置到料架 Material Ready in Magazine
Res0068 信息 Info.
Res0069 时间 Time
Res0070 模块 Module
Res0071 步骤 Steps
Res0072 设备加载中,请稍后... Loading…
Res0073 IO调试 I/O Diagnostic
Res0074 伺服调试 Servo Diagnostic
Res0075 位置调试 Location Calibration
Res0076 治具设置 Carrier Setting
Res0077 启用配置模式 Configuration Mode ON
Res0078 停用配置模式 Configuration Mode OFF
Res0079 检测到料车对接 Trollery Detected
Res0080 NG料门未打开 NG Door Not Open
Res0081 暂停运行 Pause
Res0082 启动 Start
Res0083 未启动 Not Activated
Res0084 NG料口上锁 Ng Door Locked
Res0085 NG料口解锁 Ng Door Unlocked
Res0086 料车没有到位 Trolley Not In Place
Res0087 请对接料车 Please Dock The Trollery
Res0088 NG料门未关好,无法上锁 NG Door Not Closed, Can Not Be Locked
Res0089 起用蜂鸣器 Enable Buzzer
Res0090 其他取放料口 Other Material Door
Res0091 暂停中 Pause
Res0092 复位中 Reset
Res0093 正在运行 In Operation
Res0094 黄灯 Yellow
Res0095 红灯 Red
Res0096 无动作 Waiting
Res0097 关 OFF
Res0098 开 ON
Res0099 闪烁 Flashing
Res0100 保存成功! Saved!
Res0101 保存失败! Save Failed!
Res0102 RFID读取失败 RFID Reading Failed
Res0103 开始转移物料时,料叉上检测到有料,无法开始 No Material Detected, Cannot Transfer
Res0104 物料出库后,料叉上没有检测到物料,请检查 No Material Detected, Please Check
Res0105 未识别到有效二维码,放入NG箱 2D Code Not Recognized. Put Into NG Box.
Res0106 暂停入库,等待出库任务数量小于: Stop Loading. Waiting for Unloading Task Less Than:
Res0107 等待料车离开 Waiting for Trolley
Res0108 当前没有料串 No Stacker
Res0109 感应到料串 Stacter Detected
Res0110 料串正在上升 Staker Up
Res0111 料串取料准备就绪 Stacker Ready To Picking
Res0112 料串放料准备就绪 Stacker Ready To Piutting
Res0113 料串正在下降 Stacker Down
Res0114 料串已满请取出 Please Take The Full Stacker.
Res0115 等待料串被取走 Please Take The Stacker.
Res0116 空料串 Empty Stacker.
Res0117 满料串 Full Stacker.
Res0118 入库料串 Store Stacker
Res0119 无料串 No Stacker.
Res0120 料串准备中 Stacker Preparing
Res0121 料串释放中 Stacker Releasing
Res0122 直径 Diameter
Res0123 厚度 Thickness
Res0124 条码 Barcode
Res0125 料架已没有空位 No Empty Slot
Res0126 有正在出库的任务,请放入{0}规格的料架 Unloadinging, Please Put In {0} Magazine
Res0127 NG料门未关闭 NG Door Not Closed
Res0128 请先选择运动轴 Please Select Axis.
Res0129 警告 Warning
Res0130 提示 Notice
Res0131 请先输入正确的速度 Please Enter The Correct Speed.
Res0132 错误码： Error Code:
Res0133 屏幕键盘 Screen Keyboard
Res0134 料架种类错误请取走 Wrong Magazine Type! Please Change
Res0135 有出库任务但料串不在等待出库状态 Unloading Task, But Stacker Not Ready.
Res0136 取料后吸盘上没有检测到料盘 No Reel Detected On Vacuum Gripper
Res0137 未扫到有效条码 No Vaild Code Scanned
Res0138 机器尚在运行,不能退出,请先停止运行. Cannot Exit During Operation. Please Stop Operation First.
Res0139.60c85b4b 轴 Axis
Res0140.0c33436f 绝对运动，目标位置 Absolute Motion, Target Position
Res0141.87979227 等待 Waiting
Res0142.d7647f48 时间等待 Wait Time
Res0143.21157cbf 毫秒 ms
Res0144.3802ba42 ORG信号 ORG Signal
Res0145.f4a8d691 料盘高度 Reel Thickness
Res0146.84e7c741 批量轴上升到上料点 Batch Axis Up To Loading Position
Res0147.ed4de1c6 扫码完成 Scan Completed
AIDI1_DefaultGap 状态监控 Status Monitoring
AIDI1_DefaultPosition 高度信号1默认高度 Height Signal 1 Default Height
Airpressure_Check 气压检测 Pressure Detection
airpressure_not_enough 气压不足 Insufficient Pressure
Alarm_Buzzer 故障状态（蜂鸣器） Fault Status (Buzzer)
Alarm_Led 故障状态（指示灯） Fault Status (Indicator)
AutoRun_Single 自动启动 Auto Start
AxisMoveControl_status_monitor 状态监控 Condition Monitoring
Counting_EnterDoor_Close 点料机入口门关闭端 Counter Loading Door Closed End
Counting_EnterDoor_Open 点料机入口门打开端 Counter Loading Door Open End
Counting_Entry 点料机入料皮带伺服 Loading Belt Servo
Counting_Entry_Length 点料机入料皮带运行距离 Loading Belt Servo Running Distance
Counting_ExitDoor_Close 点料机出口门关闭端 Counter Unloading Door Closed End
Counting_ExitDoor_Open 点料机出口门打开端 Counter Unloading Door Open End
Counting_Inside 点料机内部皮带伺服 Counter Internal Belt Servo
Counting_Inside_Length 点料机内部皮带运行距离 Counter Internal Belt Servo Running Distance
Counting_Location_13in 点料机出料定位13寸 13inch Unloading Position
Counting_Location_15in 点料机出料定位15寸 15inch Unloading Position
Counting_Location_7in 点料机出料定位7寸 7inch Unloading Position
Counting_Location_P1 点料机出料定位待机点P1 Counter Unloading Position Standby P1
Counting_Offline_Entry_Length 点料机入料皮带离线退出距离 Counter Loading Belt Offline Exit Distance
Counting_Offline_Inside_Length 点料机内部皮带离线退出距离 Counter Internal Belt Offline Exit Distance
Counting_Reel_Check 点料机内部料盘检测 Internal Reel Detection
dataGrid_DateTime 时间 Time
dataGrid_ID 条码 Barcode
dataGrid_Qty 数量 Qty
dataGrid_Slot 盘位 Reel Position
detect_signal 检测信号 Detection Signal
device_initializing 设备加载中,请稍后... Loading…
device_isrunning_cant_exit 机器尚在运行,不能退出,请先停止运行. Please stop running before exit.
device_pause 暂停运行 Pause
device_resume 恢复运行 Restart
device_suddenstop_cant_start 急停中,无法启动 Emergency stop, cannot start
disable_config_mode 停用配置模式 Configuration Mode Off
enable_config_mode 启用配置模式 Configuration Modo On
ignored 已忽略 Ignored
in_store_nothave_position 入库未找到库位： Storage location not found:
in_suddenstop 急停中 Emergency stop
iocard_init_fail IO板卡初始化失败 IO Card Initialization Failed
Loading_Btn 上料区上料确认按钮 Loading Area Loading Confirmation Button
Loading_Cache_Reel_Check 上料区缓存区料盘检测 Loading Buffer Area Reel Detection
Loading_Device_Led 上料区相机光源打开 Loading Area Camera Light On
Loading_Door_Check 上料区门禁信号 Loading Area Access Control Signal
Loading_Door_Lock 上料区门禁锁定 Loading Area Access Control Lock
Loading_Door_Lock_Check 上料区门禁锁定监控 Loading Area Access Control Lock Monitoring
Loading_INP_Led 上料区料盘到位指示灯 Loading Area Reel In Place Indicator Light
Loading_Line_Reel_Check 上料区皮带线料盘检测 Loading Area Conveyor Reel Detection
Loading_NG_Led 上料区料盘NG指示灯 Loading Area Reel NG Indicator Light
Loading_ReelVacuum_Off 上料区吸盘放料 Loading Area Vacuum Gripper Release Material
Loading_ReelVacuum_On 上料区吸盘吸料 Loading Area Vacuum Gripper Get Material
Loading_VacuumDegree_Check 上料区吸盘压力检测 Loading Area Vacuum Gripper Pressure Detection
Loading_X_Axis 上料区横移X轴 Loading Area AMH X-Axis
Loading_X_Axis_P1 上料区横移X轴待机点P1 Loading Area AMH X-Axis Standby Point P1
Loading_X_Axis_P2 上料区横移X轴取料点P2 Loading Area AMH X-Axis Pickup Point P2
Loading_X_Axis_P3 上料区横移X轴放料点P3 Loading Area AMH X-Axis Unloading Point P3
Loading_X_Axis_P4 上料区横移X轴离线取料点P4 Loading Area AMH X-Axis Offline Pickup Point P4
Loading_Z_Axis 上料区横移Z轴 Loading Area AMH Z-Axis
Loading_Z_Axis_P1 上料区横移Z轴待机点P1 Loading Area AMH Z-Axis Standby Point P1
Loading_Z_Axis_P2 上料区横移Z轴取料(8MM)P2 Loading Area AMH Z-Axis Pickup (8MM) P2
Loading_Z_Axis_P3 上料区横移Z轴放料(8MM)P3 Loading Area AMH Z-Axis Unloading (8MM) P3
Loading_Z_Axis_P4 上料区横移Z轴离线取料(8MM)P4 Loading Area AMH Z-Axis Offline Pickup (8MM) P4
monitor_config_load_fail 加载监控相机配置文件失败: Failed to Load Monitoring Camera Configuration File
monitor_config_not_exist 找不到监控相机配置文件 Monitoring Camera Configuration File Not Found
monitor_open_fail 监控相机打开失败 Monitor open failed.
motion_alarm 运动报警 Motion Alarm
not_detect_airpressure 未检测到气压信号. No Air Pressure Signal Detected
open_debug_mode 打开调试模式 Start Diagnostic Mode
query_count 查询到{0}条结果. {0} Results Found
Reset_BTN 复位 Reset
reset_press 按下复位按钮. Press Reset Button
reset_press_with_sudden 急停未解除,按下复位按钮尝试复位安全继电器. Emergency stop not released, press Reset button to attempt resetting safety relay.
Run_Led 运行状态（指示灯） Operation Status (Indicator)
runbtn_press_with_sudden 急停中,按下启动按钮,无法启动. Emergency stop, unable to start by pressing Start button
Standby_Led 待机状态（指示灯） Standby Status (Indicator)
start 启动 Start
start_device_first 请先启动设备！ Please start the machine first!
store_inout_debug_mode 进出库调试模式 Un/Loading Diagnostic Mode
SuddenStop_BTN 急停 E-Stop
system_is_running 系统正在运行. System is running
system_need_reset 系统需要重置 System needs to be reset.
system_pause 系统暂停 System Pause
system_running_cantmove 系统正在运行,不能手动控制伺服 System Pause System is running, unable to manually control the servo
tab_axis 伺服调试 Servo Diagnostic
tab_hc 点料历史 Counter History
tab_io IO调试 IO Diagnostic
tab_setting 相关设置 Related Settings
table_datetime 时间 Time
table_info 信息 Info.
table_module 模块 Module
table_step 步骤 Step
UnLoading_Line_Reel_Check 下料区皮带线料盘检测 Unloading Area Conveyor Reel Detection
UnLoading_Line_Run 下料皮带线启动 Enable Unloading Conveyor
UnLoading_Location 点料机出料定位伺服 Unloading Position Servo
UnLoading_ReelVacuum_Off 下料区吸盘放料 Unloading Area Vacuum Gripper Release Material
UnLoading_ReelVacuum_On 下料区吸盘吸料 Unloading Area Vacuum Gripper Get Material
UnLoading_VacuumDegree_Check 下料区吸盘压力检测 Unloading Area Vacuum Gripper Pressure Detection
UnLoading_X_Axis 下料区横移X轴 Unloading Area AMH X-Axis
UnLoading_X_Axis_P1 下料区横移X轴待机点P1 Unloading Area AMH X-Axis Standby Point P1
UnLoading_X_Axis_P2 下料区横移X轴取料点P2 Unloading Area AMH X-Axis Pickup Point P2
UnLoading_X_Axis_P3 下料区横移X轴放料点P3 Unloading Area AMH X-Axis Unloading Point P3
UnLoading_Z_Axis 下料区横移Z轴 Unloading Area AMH Z-Axis
UnLoading_Z_Axis_P1 下料区横移Z轴待机点P1 Unloading Area AMH Z-Axis Standby Point P1
UnLoading_Z_Axis_P2 下料区横移Z轴取料(8MM)P2 Unloading Area AMH Z-Axis Pickup (8MM) P2
UnLoading_Z_Axis_P3 下料区横移Z轴放料(8MM)P3 Unloading Area AMH Z-Axis Unloading (8MM) P3
X00-急停 急停 E-Stop
X01-复位 复位 Reset
X02-自动启动 自动启动 Autostart
X03-气压检测 气压检测 Pressure Detection
X04-点料机入口门打开端 点料机入口门打开端 Counter Loading Door Open End
X05-点料机入口门关闭端 点料机入口门关闭端 Counter Loading Door Closed End
X06-点料机出口门打开端 点料机出口门打开端 Counter Unloading Door Open End
X07-点料机出口门关闭端 点料机出口门关闭端 Counter Unloading Door Closed End
X08-点料机内部料盘检测 点料机内部料盘检测 Internal Reel Detection
X09-下料区皮带线料盘检测 下料区皮带线料盘检测 Unloading Area Conveyor Reel Detection
X10-下料区吸盘压力检测 下料区吸盘压力检测 Unloading Area Vacuum Gripper Pressure Detection
X16-上料区门禁信号 上料区门禁信号 Loading Area Access Control Signal
X17-上料区门禁锁定监控 上料区门禁锁定监控 Loading Area Access Control Lock Monitoring
X18-上料区上料确认按钮 上料区上料确认按钮 Loading Area Loading Confirmation Button
X19-上料区缓存区料盘检测 上料区缓存区料盘检测 Loading Buffer Area Reel Detection
X20-上料区皮带线料盘检测 上料区皮带线料盘检测 Loading Area Conveyor Reel Detection
X21-上料区吸盘压力检测 上料区吸盘压力检测 Loading Area Vacuum Gripper Pressure Detection
Xray_Lock X光机互锁信号ON Counter Interlock Signal ON
Y00-运行状态（指示灯） 运行状态（指示灯） Operating Status (Indicator Light)
Y01-故障状态（指示灯） 故障状态（指示灯） Error Status (Indicator Light)
Y02-待机状态（指示灯） 待机状态（指示灯） Standby Status (Indicator Light)
Y03-故障状态（蜂鸣器） 故障状态（蜂鸣器） Error Status (Buzzer)
Y04-X光机互锁信号ON X光机互锁信号ON Counter Interlock Signal ON
Y05-点料机入口门打开 点料机入口门打开 Counter Loading Door Open
Y06-点料机入口门关闭 点料机入口门关闭 Counter Loading Door Close
Y07-点料机出口门打开 点料机出口门打开 Counter Unloading Door Open
Y08-点料机出口门关闭 点料机出口门关闭 Counter Unloading Door Close
Y09-上料区相机光源打开 上料区相机光源打开 Loading Area Camera Light On
Y10-下料皮带线启动 下料皮带线启动 Unloading Conveyor Start
Y11-下料区吸盘吸料 下料区吸盘吸料 Unloading Area Vacuum Gripper Get Material
Y12-下料区吸盘放料 下料区吸盘放料 Unloading Area Vacuum Gripper Release Material
Y16-上料区料盘到位指示灯 上料区料盘到位指示灯 Loading Area Reel Ready Indicator
Y17-上料区料盘NG指示灯 上料区料盘NG指示灯 Loading Area Reel NG Indicator
Y18-上料区门禁锁定 上料区门禁锁定 Loading Area Access Control Lock
Y19-上料区吸盘吸料 上料区吸盘吸料 Loading Area Vacuum Gripper Get Material
Y20-上料区吸盘放料 上料区吸盘放料 Loading Area Vacuum Gripper Release Material
Res0001.45f6326b 温湿度传感器[ T/H Sensor
Res0002.1f64c53f 本机IP:[ Local IP:[
Res0003.2bf5c941 打开轴 Enable The Axis
Res0004.33d2a704 失败 Failed
Res0005.cbd5d752 清理报警， Clear Alarm
Res0006.405c5a9e ,收到原点完成信号，当前位置[ Received Origin Completion Signal, Current Position [
Res0007.6658614e ]，误差过大，需要报警 ], Excessive Error, Alarm Needed
Res0008.785abc97 界面 Interface
Res0009 按下复位按钮. Please press the reset buttom.
Res0009.6bc883a6 打印出错: Printing Error:
Res0010 急停未解除,按下复位按钮尝试复位安全继电器. Emergency stop not released, press Reset button to attempt resetting safety relay.
Res0010.a5affabf 设备未启动 Machine Not Started
Res0011.193dcaed 停机报警 Downtime Alarm
Res0012.432da1b6 报警 Alarm
Res0013.22d9202d 复位 Reset
Res0014.4c763bb6 运行 Run
Res0015.8d63ef38 暂停 Pause
Res0016.85e050ee 下料机构Z轴不在待机点P1无法移动X轴 Loading Axis Z-axis Not at Standby Point P1, Unable to Move X-axis
Res0017.32da8e00 上料机构Z轴不在待机点P1无法移动X轴 Unloading Axis Z-axis Not at Standby Point P1, Unable to Move X-axis
Res0018.083af4e8 取料机构 Loading Mechanism
Res0019.af853eff 点料机构 Counting Mechanism
Res0020.9b8fd95a 放料机构 Unloading Mechanism
Res0021.4b9c3271 重置 Reset
Res0022.13d6349a 点料机入口 Counter Loading Port
Res0023.62a1ae88 离线点料 Offline Counting
Res0024.e66b11a3 运行开关未打开 Operation Switch Not Turned On
Res0025.f8a282a4 上料区门禁没有关闭 Loading Area Access Control On
Res0026.b14e3e39 压紧轴报警 Compression Axis Error
Res0027.0327e042 等待出料机构空闲 Waiting for Unloading Axis to be Free
Res0028.4115286b 点料机内未感应到物料,请检查 No Material Detected Inside the Counter, Please Check
Res0029.3439b24a 点料机内未感应到物料 No Material Detected Inside the Counter
Res0030.5c7ec3e0 X光高压打开失败 X-ray High Voltage Failed to Turn On
Res0031.93955acc 点料结果为0 Count Result is 0
Res0032.ddd54440 获取图像失败 Image Acquisition Failed
Res0033.8bdf00e1 获取料盘X光图像超时 Acquiring Reel X-ray Image Timeout
Res0034.c580077e 点料区料盘等待离开 Reel Awaiting Departure in Counting Area
Res0035.a06c3285 空闲中 Idle
Res0036.56fe9d37 当前物料 Current Material
Res0037.88021933 入料口取料失败 Pick Material from Loaidng Port Failed
Res0038.4a36d8fe 等待点料机入口物料离开 Waiting for Material to Leave the Counter Loading Port
Res0039.ac251f41 在皮带线入口放料后未检测到物料 No Material Detected After Discharging at Belt Line Inlet
Res0040.620f6776 请关好安全门 Please Close the Safety Door
Res0041.12ed5fd0 安全门锁定失败 Safety Door Lock Failed
Res0042.1f76cf60 等待在线点料完成后开始手动点料 Wait for Online Counting to Complete Before Starting Manual Counting
Res0043.895a613c 未扫到有效条码 No Vaild Code Scanned
Res0044.eef57393 扫码失败 Barcode Scanning Failed
Res0045.9ce0f4da 皮带线入口未检测到物料 No Material Detected at Conveyor Inlet
Res0046.084181c2 从皮带线取盘失败 Failed to Pick Reel from Conveyor
Res0047.84f7d800 等待取走料盘 Waiting to Remove Reel
Res0048.9a62a7ad 点料中 Counting..
Res0049.fc31efc6 出料口未检测到料盘 No Reel Detected at Unloading Port
Res0050.fd087cea 出料皮带线取料失败 Failed to Pick from Unloading Conveyor
Res0051.84e7c741 批量轴上升到上料点 Batch Axis Up To Loading Position
Res0052.ed4de1c6 扫码完成 Scan Completed
Res0053.354f5d1c 找不到料串位置文件 Cannot Find Stacker Position File
Res0054.56abc9e6 X光管通讯失败: X-ray Tube Communication Failure:
Res0055.cc218e32 X光电压电流设置失败:{0},{1} X-ray Voltage Current Setting Failed: {0},{1}
Res0056.4f408744 图像平板打开失败 Imaging Tablet Failed to Open
Res0057.f11b67ff 标签打印机打开失败 Label Printer Failed to Open
Res0058.ad272433 请先选择运动轴 Please Select a Motion Axis First
Res0059.589f38aa 警告 Warning
Res0060.02d9819d 提示 Prompt
Res0061.34926106 请先输入正确的速度 Please Enter the Correct Speed
Res0062.239955da 错误码： Error Code:
Res0063.8204c58b 伺服尚未使能 Servo Not Yet Enabled
Res0064.3a3be4e5 伺服警报状态中 Servo in Alarm State
Res0065.b0ea0c00 无法操作 Cannot Operate
Res0066.86cec616 条码首字母不能为空 Barcode's First Letter Cannot be Empty
Res0067.d3acbb5a 物理厚度 Physical Thickness
Res0068.be193cf0 自动弃用 Auto Abandon
Res0069.d8c7e04c 信息 Info.
Res0070.19fcb9eb 时间 Time
Res0071.fac54c34 模块 Module
Res0072.52b36576 步骤 Step
Res0073.f4baf7c6 未启动 Not Activated
Res0074.741acc93 暂停中 Pause
Res0075.c4aa1667 重新点数 {0} Recount {0}
Res0076.f0771934 找不到文件: Cannot Find File:
Res0077.e851163e 设备正在运行,请先停止. Device is Running, Please Stop First.
Res0078.fc8d3e1e 开始标定,请等待30秒 Starting Calibration, Please Wait 30 Seconds
Res0079.90d53f10 标定完成. Calibration Completed
Res0080.584cf2b3 拍照完成 Photo Capture Completed
Res0081.08ed2d88 拍照失败 Photo Capture Failed
Res0082.2ede4a07 打印成功 Print Success
Res0083.da352647 点料结果 Count Result 
Res0084.c3002152 请先启动设备 Please Start the Device First
Res0085.c489c349 入料机构尚未空闲 Loading Axis Not Free
Res0086.721bbd6f 升降轴位置调试： Vertical Axis Position Calibration
Res0087.7391f00b 请输入正确的速度 Please Enter the Correct Speed
Res0088.4e5e968f 编号,标准位置,升降轴库位入料高点P3,升降轴库位入料低点P4 No., Standard Position, Vertical Axis Loading High Point P3, Vertical Axis Loading Low Point P4
Res0089.973fece8 请填写数字 Please Enter a Number
Res0090 其他取放料口 Other Pick and Place Ports
Res0090.aa91770a 自动对点位 Auto Cycle Test
Res0091.04b371c6 _自动对点位 _Auto Cycle Test
Res0092.fc1f4abf 请按步骤确认位置信息，然后点击“开始校对位置”按钮启动位置校准 Please confirm the position information step by step and then click the "Start Position Calibration" button to initiate the location calibration.
Res0093.d40391d0 点位校准已结束，请打开文件夹查看位置文件 Position calibration has ended, please open the folder to view the position file.
Res0094.58e53f0d 请取出在入料皮带线处的料盘, 取出后按Reset按钮继续 Please remove the reel at the loading conveyor and press the Reset button to continue.
Res0095.e19bb66e 初始化. Initializing
Res0096.184519ba 检测数据. Checking data
Res0097.617be6eb 确认要删除该行数据吗？ Confirm to Delete This Row?
Res0098.14fff57f 提示？ Prompt?
Res0099.25f30ccf 位置只能输入整数，请输入正确的位置 ! Position can only be entered as integers, please enter the correct position!
Res0100.73c74189 导出XRay图像 Export Xray Image.
Res0101.4ba46905 请输入正确的升降轴开始位置 Please enter the correct starting position for the Vertical axis.
Res0102.30d5b8a0 请输入正确的升降轴最高位置 Please enter the correct highest position for the Vertical axis.
Res0103.98a80c82 请至少输入一个旋转轴位置 Please enter at least one position for the Rotating axis.
Res0104.153bf2ee 确认提示 Confirm Prompt
Res0105.aa0dd15c 请确认对点位参数 Please confirm the position parameters
Res0106.5d750047 请注意 Please Note
Res0107.d953645b 密码不正确请重新输入! Password Incorrect, Please Re-Enter!
Res0108.fac6fc4c 状态,优先级从大到小 Status, priority from high to low
Res0109.d6f96019 绿灯 Green
Res0110.38c52bcd 黄灯 Yellow
Res0111.4d9b6b90 传感器 Sensor
Res0112.57338745 红灯 Red
Res0113.686a1307 计算高度: Calculate Height
Res0114.df3b23ca 无动作 No action
Res0115.d58a55bc 关 Off
Res0116.0c1b54e4 超声波传感器 Ultrasonic Sensor
Res0117.aaecd414 打开失败 Open Failed
Res0118.84932056 开 On
Res0119.1548bf2b 闪烁 Flashing
Res0120.c00eba5f 保存成功! Saved!
Res0121.73b0d962 保存失败! Save Failed!
Res0122.46e0de63 旧密码不正确! Old Password Wrong!
Res0123.5143cc86 两次输入的新密码不一致,请确认! New Password Entered Not The Same, Please Confirm!
Res0124.99456362 新密码不能为空! New Password Cannot Be Empty!
Res0125.4c7f7ac0 密码修改成功! Password Change Successfully!
Res0126.2904b4c5 当前图像文件已被清理 ... Enable Failed
Res0127.9fe8f323 文件导出失败 Server Connecting..
Res0128.95c9b889 可能因为点料失败,缺失结果文件 The result file missing may due to a failure of counting failure.
Res0148.1bf30741 第{0}次尝试打开轴:{1} Try To Enable Axis: {1} For {0} Times
Res0149.814c87d5 ...伺服忙碌,急停{0}次 ... Servo Busy, EM Stop {0} times
Res0150.226d8802 ...使能成功 ..Enable Success
Res0151.ebec6459 ...尝试使能失败 …Enable Failed
Res0149.814c87d5 ...伺服忙碌,急停{0}次 ... Servo Busy, EM Stop {0} Times
Res0150.226d8802 ...使能成功 ... Enable Succeed
Res0151.ebec6459 ...尝试使能失败 ... Enable Failed
Res0152.3cb23f45 伺服连接中... Server Connecting..
Res0153.2bf5c941 打开轴 Enable The Axis
Res0154.33d2a704 失败 Failed
Res0155.cbd5d752 清理报警 Clear Alarm
Res0156.d7fc412d 返回原点失败 Back to Origin Failed
Res0157.95840864 轴(0)存在报警,清除失败 Axis (0) Alarm, Alarm Clear Failed
Res0158.b5876296 轴(0)存在报警,清除成功 Axis (0) Alarm, Alarm Clear Succeed
Res0159.8072e88f R侧NG门开关后,任然检测到有物料,请取走所有NG物料. After opening the R-side NG door switch, there are still materials detected. Please remove all NG materials.
Res0160.5a9787db RFID读取失败 RFID read failure.
Res0161.dcd81d99 当前有出库任务或者托盘已用完,暂停入库 Unloading task in operation or no pallet, loading prohibited.
Res0162.ab12b11b 恢复运行 Resume
Res0183 打开失败 Open Failed
UILanguageTooles/Library/en-US/11.lngres 0 → 100644
AxisControl_panel1_groupBox1_btn_comptest_Text 压紧测试 Compression Test
AxisControl_panel1_groupBox1_groupBox1_Text 压紧轴点位调试 Compression Axis Point Calibration
AxisControl_panel1_groupBox1_lbl_acheight_Text 设置高度 Set Height
AxisControl_panel1_groupBox1_Text 压紧轴点位调试 Compression Axis Point Calibration
AxisMoveControl_groupAxis_groupAxis_Text 伺服运动 Servo Movement
AxisMoveControl_groupAxis_groupBox2_groupBox2_Text 轴状态监控 Axis Status Monitor
AxisMoveControl_groupAxis_groupBox2_label2_Text 实际加速度: Actual Acceleration
AxisMoveControl_groupAxis_groupBox2_label4_Text 回原状态: original state
AxisMoveControl_groupAxis_groupBox2_label50_Text 规划模式: Plan Mode:
AxisMoveControl_groupAxis_groupBox2_label52_Text 规划位置: Planning Position:
AxisMoveControl_groupAxis_groupBox2_label53_Text 规划速度: Planning Velocity:
AxisMoveControl_groupAxis_groupBox2_label55_Text 实际位置: Actual Position:
AxisMoveControl_groupAxis_groupBox2_label56_Text 实际速度: Actual Velocity:
AxisMoveControl_groupAxis_groupBox2_lblALM_Text 报警 Alarm
AxisMoveControl_groupAxis_groupBox2_lblBUSY_Text 忙碌 Busy
AxisMoveControl_groupAxis_groupBox2_lblEMG_Text 急停 E-stop
AxisMoveControl_groupAxis_groupBox2_lblINP_Text 到位 In Position
AxisMoveControl_groupAxis_groupBox2_lblORG_Text 原点 Home
AxisMoveControl_groupAxis_groupBox2_lblSvOn_Text 伺服 Servo
AxisMoveControl_groupAxis_groupBox2_lblWARN_Text 警告 Warn
AxisMoveControl_groupAxis_groupBox2_Text 轴状态监控 Axis Status Monitor
AxisMoveControl_groupAxis_panel1_btnAddMove_Text 点动+ Jogging +
AxisMoveControl_groupAxis_panel1_btnAxisAMove_Text 绝对运动 Absolute Motion
AxisMoveControl_groupAxis_panel1_btnAxisReturnHome_Text 原点返回 Return To Home
AxisMoveControl_groupAxis_panel1_btnAxisRMove_Text 相对运动 Relative Motion
AxisMoveControl_groupAxis_panel1_btnAxisStop_Text 停止运动 Stop
AxisMoveControl_groupAxis_panel1_btnAxisVMove_Text 匀速运动 Uniform Motion
AxisMoveControl_groupAxis_panel1_btnCloseAxis_Text 关闭伺服 Turn Off Servo
AxisMoveControl_groupAxis_panel1_btnComAlarmClear_Text 清除报警 Clear Alarm
AxisMoveControl_groupAxis_panel1_btnDelMove_Text 点动- Jogging-
AxisMoveControl_groupAxis_panel1_btnOpenAxis_Text 打开伺服 Turn On Servo
AxisMoveControl_groupAxis_panel1_cmbAxis_Text 进料机构提升轴 Loading Lifting Axis
AxisMoveControl_groupAxis_panel1_label1_Text 点动速度： Jogging Velocity:
AxisMoveControl_groupAxis_panel1_label46_Text 地址: Address:
AxisMoveControl_groupAxis_panel1_label47_Text 目标速度: Target Velocity:
AxisMoveControl_groupAxis_panel1_label48_Text 目标位置: Target Position
AxisMoveControl_groupAxis_panel1_label49_Text AC伺服: AC Servo:
AxisMoveControl_groupAxis_panel1_label8_Text 实时位置: Live Position
AxisMoveControl_groupAxis_panel1_linkLabel1_Text 复制 Copy
AxisMoveControl_groupAxis_Text 伺服运动 Servo Motion
ConfigControl_btnSavePos_Text 全部保存 Save All
ConfigControl_Feed_btnSavePos_Text 全部保存 Save All
ConfigControl_Feed_groupBox3_Text 点位列表 Location List
ConfigControl_groupBox3_groupBox3_Text 点位列表 Location List
ConfigControl_groupBox3_Text 点位列表 Location List
F？》rmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftInDoor_lblReelInfo_Text 暂无物料 No Material
FrmCodeDecode_btnAn_Text 变暗 Dimming
FrmCodeDecode_btnbarCode_Text 一维码识别 1D Code Recognition
FrmCodeDecode_btnCameraImage_Text 相机获取图片 Camera Image
FrmCodeDecode_btnClearLog_Text 清理日志 Clear Log
FrmCodeDecode_btnCopyN_Text 复制名称 Copy Name
FrmCodeDecode_btnDCode_Text 二维码识别 2D Code Recognition
FrmCodeDecode_btnErZhi_Text 二值化 Binarization
FrmCodeDecode_btnExit_Text 退出 Exit
FrmCodeDecode_btnGray_Text 图像转灰 Image Graying
FrmCodeDecode_btnLearn_Text 学习 Learn
FrmCodeDecode_btnLight_Text 提亮 Brightening
FrmCodeDecode_btnSelImage_Text 打开本地图片 Open Local Image
FrmCodeDecode_chbUseParam_Text 使用参数 Operation parameter
FrmCodeDecode_FrmCodeDecode_Text 二维码识别 2D Code Recognition
FrmCodeDecode_label1_Text 图片路径 Image Path
FrmCodeDecode_label2_Text 相机列表： Camera List:
FrmCodeDecode_label3_Text 条码类型： Barcode Type:
FrmCodeDecode_label4_Text 参数路径 Parameter Path
FrmCodeDecode_lblCount_Text 条码数量： Barcode Qty:
FrmCodeDecode_Text 二维码识别 2D Code Recognition
FrmCodeLearn_btnClearLog_Text 清理日志 Clear log
FrmCodeLearn_btnDelOld_Text 删除旧参数 Delete Old Parameter
FrmCodeLearn_btnExit_Text 退出 Exit
FrmCodeLearn_btnOpen_Text 开始学习 Start Learning
FrmCodeLearn_btnSelImage_Text 打开本地图片 Open Local Image
FrmCodeLearn_btnStop_Text 结束学习 Stop Learning
FrmCodeLearn_chbHalcon_Text Halcon获取图片 Halcon Get Photo
FrmCodeLearn_chbTest_Text 学习结束自动识别测试 Automatic Identification Test
FrmCodeLearn_chbUseCamera_Text 相机获取实时图片 Get Camera Image
FrmCodeLearn_label1_Text 相机： Camera:
FrmCodeLearn_label2_Text 类型： Type:
FrmCodeLearn_label3_Text 参数路径 Parameter Path
FrmCodeLearn_label4_Text 图片路径 Image Path
FrmCodeLearn_lblCount_Text 条码数量： Barcode Qty:
FrmCodeLearn_Text 条码参数学习 Barcode Parameter Learning
FrmMain_btn_PauseBuzzer_Text 本次暂停警报器响声 Mute
FrmMain_tabc_tab_io_Text IO调试 IO Diagnoistic
FrmMain_tabc_tab_leftMachine_Text A侧料仓 Module A
FrmMain_tabc_tab_log_Text 日志 Log
FrmMain_tabc_tab_middleMachine_Text 上料机构 Loading Mechanism
FrmMain_tabc_tab_rightMachine_Text B侧料仓 Module B
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_btnScanCode_Text 扫码测试 Scan Test
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_button2_Text 删除 Delete
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_button1_Text 添加/修改 Add/Modify
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_checkBox_fixtureheight_Text 使用治具物理高度(毫米) Use Carrier Physical Height (mm)
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_checkBox_useedremove_Text 弃用条码 Discard Barcode
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_groupBox_add_Text 添加或修改 Add or Modify
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_label_startword_Text 匹配首字母: Match First Letter:
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_label_wxh_Text 对应宽x高(毫米): Corresponding Width X Height (mm):
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_Text 添加或修改 Add or Modify
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_tabPage_set_Text 常规设置 General Setting
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_Text 常规设置 General Setting
FrmMain_tabc_tab_sc_pnlAuto_SettingControl_tabControl1_tabPage_set_tp_label_tempsensor_Text 温湿度控制器端口: T&H Controller Port:
FrmMain_tabc_tab_sc_Text 通用设置 General Setting
FrmMain_tabc_tabP1_pnl_btn_PauseBuzzer_Text 本次暂停警报器响声 Stop Alarm This Time
FrmMain_tabc_tabP1_pnl_btnReleaseString_Text 安全释放料串 Release Stacker
FrmMain_tabc_tabP1_pnl_gb_Msg_Text 消息 Message
FrmMain_tabc_tabP1_pnl_groupBox1_Text 运行步骤 Run Step
FrmMain_tabc_tabP1_Text 信息 Message
FrmMain_tabc_tabP2_Text 监控 Monitor
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftFix_lblReelInfo_Text 暂无物料 No Material
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftFix_panName_lblSingle_Text 检测有料 Material Detected
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftFix_panName_lblText_Text 暂存区物料信息 Buffer Area Info
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftFix_panName_linkClear_Text 清除料盘信息 Clear
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftInDoor_panName_lblSingle_Text 检测有料 Material Detected
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftInDoor_panName_lblText_Text 暂存区物料信息 Buffer Area Info
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataLeftInDoor_panName_linkClear_Text 清除料盘信息 Clear Material Info
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightFix_lblReelInfo_Text 暂无物料 No Material
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightFix_panName_lblSingle_Text 检测有料 Material Detected
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightFix_panName_lblText_Text 暂存区物料信息 Buffer Area Info
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightFix_panName_linkClear_Text 清除料盘信息 Clear Material Info
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightInDoor_lblReelInfo_Text 暂无物料 No Material
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightInDoor_panName_lblSingle_Text 检测有料 Material Detected
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightInDoor_panName_lblText_Text 暂存区物料信息 Buffer Area Info
FrmMain_tabc_tabP3_tableLayoutPanel1_reelDataRightInDoor_panName_linkClear_Text 清除料盘信息 Clear Reel Info
FrmMain_tabc_tabP3_tableLayoutPanel1_reelLeftNGBoxControl_panName_lblText_Text NG料箱 NG Box
FrmMain_tabc_tabP3_tableLayoutPanel1_reelLeftNGBoxControl_panName_linkClear_Text 清空箱子 Clear
FrmMain_tabc_tabP3_tableLayoutPanel1_reelRightNGBoxControl_panName_lblText_Text NG料箱 NG Box
FrmMain_tabc_tabP3_tableLayoutPanel1_reelRightNGBoxControl_panName_linkClear_Text 清空箱子 Clear
FrmMain_tabc_tabP3_Text 暂存区状态 Buffer Area Status
FrmPositionTool_FrmPositionTool_Text 升降轴位置测试 Vertical Axis Position Test
FrmPositionTool_groupBox6_btnClear_Text 清理 Clear
FrmPositionTool_groupBox6_btnExit_Text 退出 Exit
FrmPositionTool_groupBox6_groupBox1_btnHomeMove_Text 原点返回 Return to Home
FrmPositionTool_groupBox6_groupBox1_btnServoOff_Text 关闭伺服 Turn Off the Servo
FrmPositionTool_groupBox6_groupBox1_btnServoOn_Text 打开伺服 Turn On the Servo
FrmPositionTool_groupBox6_groupBox1_groupBox1_Text 设备信息 Equipment Info
FrmPositionTool_groupBox6_groupBox1_label2_Text 检测信号地址： Test Signal Add.:
FrmPositionTool_groupBox6_groupBox1_Text 设备信息 Equipment Info
FrmPositionTool_groupBox6_groupBox2_btnAbsMove_Text 开始运动 Start Moving
FrmPositionTool_groupBox6_groupBox2_btnOpenFolder_Text 打开文件夹 Open the Folder
FrmPositionTool_groupBox6_groupBox2_btnSdStop_Text 停止 Stop
FrmPositionTool_groupBox6_groupBox2_groupBox2_Text 位置信息 Location Information
FrmPositionTool_groupBox6_groupBox2_ioStatusControl1_label1_Text 检测信号 Signal Detection
FrmPositionTool_groupBox6_groupBox2_label13_Text 目标位置： Target Location：
FrmPositionTool_groupBox6_groupBox2_label3_Text 保存文件名称： Save the File Name：
FrmPositionTool_groupBox6_groupBox2_label4_Text 库位高点偏移量： Location High Point Offset:
FrmPositionTool_groupBox6_groupBox2_label5_Text 库位低点偏移量： Location Low Point Offset:
FrmPositionTool_groupBox6_groupBox2_label7_Text 实际位置： Physical Position：
FrmPositionTool_groupBox6_groupBox2_label8_Text 移动速度： Movement Velocity:
FrmPositionTool_groupBox6_groupBox2_Text 位置信息 Location Information
IOControl_groupBox1_btnCloseDO_Text 关闭 OFF
IOControl_groupBox1_btnOpenDo_Text 打开 ON
IOControl_groupBox1_label14_Text 地址: Address:
IOControl_groupBox1_label5_Text 定时(ms): Timing(ms):
IOControl_groupBox1_Text DO写入 DO Write
IOControl_groupBox3_Text DI列表 DI List
IOControl_groupBox4_Text DO列表 DO List
menuStrip1_tsmiAbout_Text 关于 About
menuStrip1_tsmiDeviceOperation_Text 设备操作 Operation
menuStrip1_tsmiLanguage_Text 语言 Language
SettingControl_tabControl1_tabPage_set_btnScanCode_Text 扫码测试 Scaning Test
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_button2_Text 删除 Delete
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_button1_Text 添加/修改 Add/Modify
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_checkBox_fixtureheight_Text 使用治具物理高度(毫米) Use Carrier Physical Height (mm)
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_checkBox_useedremove_Text 弃用条码 Discard Barcode
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_groupBox_add_Text 添加或修改 Add or modify
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_label_startword_Text 匹配首字母: Match First Letter:
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_label_wxh_Text 对应宽x高(毫米): Corresponding Width X Height (mm):
SettingControl_tabControl1_tabPage_set_fixtureSizeConfigControl1_groupBox_add_Text 添加或修改 Add or modify
SettingControl_tabControl1_tabPage_set_tabPage_set_Text 常规设置 General Setting
SettingControl_tabControl1_tabPage_set_Text 常规设置 General Setting
SettingControl_tabControl1_tabPage_set_tp_label_tempsensor_Text 温湿度控制器端口: T&H Controller Port:
StorePosControl_btnSavePos_Text 保存 Save
StorePosControl_groupBox3_groupBox3_Text 点位列表 Location List
StorePosControl_groupBox3_Text 点位列表 Location List
tsmiDeviceOperation_tsmiAllStart_Text 全部启动 All Start
tsmiDeviceOperation_tsmiAllStop_Text 全部停止 All Stop
tsmiDeviceOperation_tsmiDisableBuzzer_Text 禁用蜂鸣器 Disable Buzzer
tsmiDeviceOperation_tsmiExit_Text 退出 Exit
tsmiDeviceOperation_tsmiQRDebug_Text 二维码识别 2D Code Recognition
UC_LedConfig_button_reset_Text 重置为默认值 Reset to Default
UC_LedConfig_button_save_Text 保存设定 Save the Setting
UCFeedMachine_btn_stop_Text 停止 Stop
UCFeedMachine_tabc_tab_axis_Text 伺服调试 Servo Diagnoistic
UCFeedMachine_tabc_tab_sio__FeedIOControls_button1_Text 料串门开启 Open Stacker Door
UCFeedMachine_tabc_tab_sio__FeedIOControls_button10_Text 定位上升 Positioning Ascent
UCFeedMachine_tabc_tab_sio__FeedIOControls_button11_Text 气缸后退 Cylinder Backward
UCFeedMachine_tabc_tab_sio__FeedIOControls_button12_Text 气缸前进 Cylinder Forward
UCFeedMachine_tabc_tab_sio__FeedIOControls_button2_Text 料串门关闭 Close Stacker Door
UCFeedMachine_tabc_tab_sio__FeedIOControls_button3_Text 吸盘吸料 Get Reel
UCFeedMachine_tabc_tab_sio__FeedIOControls_button5_Text 吸盘放料 Release Reel
UCFeedMachine_tabc_tab_sio__FeedIOControls_button6_Text 线体反转 Conveyor Counter Clockwise
UCFeedMachine_tabc_tab_sio__FeedIOControls_button7_Text 线体停止 Conveyor Stop
UCFeedMachine_tabc_tab_sio__FeedIOControls_button8_Text 线体正转 Conveyor Clockwise
UCFeedMachine_tabc_tab_sio__FeedIOControls_button9_Text 定位下降 Positioning Descend
UCFeedMachine_tabc_tab_sio_Text IO调试 IO Diagnoistic
UCStoreMachine_btn_IgnoreX09_Text 忽略料叉检测错误,并继续运行 Ignore fork detection errors and continue running
UCStoreMachine_tabc_tab_axis_Text 伺服调试 Servo Diagnoistic
UCStoreMachine_tabc_tab_setting__StoreSettingControl_tabControl1_tabPage_set_btnCameraCheck_Text 出料口料盘检测 Material Door Reel Detection
UCStoreMachine_tabc_tab_setting__StoreSettingControl_tabControl1_tabPage_set_button1_Text 重新加载AOI配置 Reload the AOI configuration
UCStoreMachine_tabc_tab_setting__StoreSettingControl_tabControl1_tabPage_set_tabPage_set_Text 常规设置 General Setting
UCStoreMachine_tabc_tab_setting__StoreSettingControl_tabControl1_tabPage_set_Text 常规设置 General Setting
UCStoreMachine_tabc_tab_setting__StoreSettingControl_tabControl1_tabPage_set_tp_button_positiontool_Text 库位定位辅助工具 Location Positioning Aids
UCStoreMachine_tabc_tab_setting__StoreSettingControl_tabControl1_tabPage_set_tp_cb_usefixpos_Text 启用校准库位 Enable Location Calibration
UCStoreMachine_tabc_tab_setting_Text 相关设置 Related Setting
UCStoreMachine_tabc_tab_sio_Text IO调试 IO Diagnoistic
UCStoreMachine_tabc_tab_store__uc_boxdebug_groupInout_btn_autoinout_Text 自动库位测试 Auto Location Test
UCStoreMachine_tabc_tab_store__uc_boxdebug_groupInout_btnInStore_Text 入库测试 Storage Test
UCStoreMachine_tabc_tab_store__uc_boxdebug_groupInout_btnOutStore_Text 出库测试 Retrieval Test
UCStoreMachine_tabc_tab_store__uc_boxdebug_groupInout_cb_inoutdebugmode_Text 出入库调试模式 Storage Dignostic Mode
UCStoreMachine_tabc_tab_store__uc_boxdebug_groupInout_groupInout_Text 料仓操作 BOX Operation
UCStoreMachine_tabc_tab_store__uc_boxdebug_groupInout_Text 料仓操作 BOX Operation
UCStoreMachine_tabc_tab_store_Text 库位调试 Location Calibration
alarm 报警 Alarm
available 空闲中 Available
Batch_Axis 批量轴 Batch Axis
before_execute_detect_material 取料前料叉{0}检测到有物料无法继续,请检查. Retrieval Is Stop Because Gripper {0} Detected Material(s). Please Check The Inside.
Comp_Axis 压紧轴 Compression Axis
configuration_off 停用配置模式 Configuration Mode OFF
configuration_on 启用配置模式 Configuration Mode On
detect_material 检测有料 Material Detected
Device_Led 设备照明 Equipment Lighting
DI_AGV_RequestEnter AGV送料串请求 AGV Loading Stacker Request
DI_AGV_RequestLeave AGV收料串请求 AGV Unloading Stacker Request
DI_AirPressure_Check 进气压力检测 Air Pressure Detection
DI_Door_SafetyLightCurtains 线体防护门安全光栅 Conv. Safety Light Curtain
DI_Door_Tray_Check 进料口物料检测 Material Door Detection
DI_Laser_Location 激光对点检测 Laser Alignment Detection
DI_NGBox_Check NG料箱检测 NG Box Detection
DI_Reset_BTN 复位 Reset
DI_String_Check 料串13/15寸识别检测 13/15 Inch Stacker Detect.
DI_String_Cylinder_BackCheck 线体推送气缸后退端 Conv. Cyl Back End
DI_String_Cylinder_FwdCheck 线体推送气缸前进端 Conv. Cyl Forward End
DI_String_EndCheck 进料线体末端料串检测 End Conv. Stacker Detect.
DI_String_Fix_DownCheck 线体料串定位下降端 Conv. Stacker Positioning Descent End
DI_String_Fix_UpCheck 线体料串定位上升端 Conv. Stacker Position Ascent End
DI_String_ForntCheck 进料线体前端料串检测 Front Conv. Stacker Detection
DI_String_TrayCheck Tray料串识别检测 Tray Magazine Detection
DI_Sucker_AirCheck 吸盘压力检测 Vac. Grip. Pressure Detection
DI_SuddenStop_BTN 急停 E-stop
DI_TrayCheck 料盘定位检测 Reel Position Detection
DI_TrayCheck_Fixture 料叉物料检测 Grip. MA. Detection
DI_Width_Check13 13寸料盘检测 13in Detection
DI_Width_Check15 15寸料盘检测 15in Detection
disable 禁用 Disable
DO_Alarm_Buzzer 故障蜂鸣器 Buzzer
DO_Alarm_Led 故障指示灯 Error IND
DO_Camera_Led 相机照明 Camera Lighting
DO_Device_Led 设备照明 Equip. Lighting
DO_Line_BackRun 线体反转 Conv. Reversal
DO_Line_Run 线体正转 Conv.Conv. Clockwise
DO_NitrogenValve 氮气阀门开启 N₂ Valve ON
DO_Run_Led 自动指示灯 Auto. IND
DO_Standby_Led 待机指示灯 Standby IND
DO_String_Cylinder_Back 线体推送气缸后退 Conv. CYL Backward
DO_String_Cylinder_Fwd 线体推送气缸前进 Conv. CYL Forward
DO_String_Fix_Down 线体料串定位下降 Conv. Stacker Position Descend
DO_String_Fix_Up 线体料串定位上升 Conv. Stacker Position Ascend
DO_Sucker_Close 吸盘放料 Vac. Grip. Release
DO_Sucker_Open 吸盘吸料 Vac. Grip. Pick up
Door_Axis 料串防护门 Stacker Protection Door
emergency_stop 急停中 Emergency stop in progress
enable_buzzer 启用蜂鸣器 Enable Buzzer
equip_is_homereset 回原中 Resetting.
equip_not_started 未启动 Not started.
Feed_Batch_DetectDownMM 接触料盘后下降mm Descend mm After Contacting The Reel.
Feed_Batch_OutPlateDownMM 出库时每盘下降mm Each Reel Descends mm When Retrieval
Feed_Batch_OutStoreDownMM 出库时初始下降mm Initial Descends mm When Retrieval
Feed_Batch_P1 提升轴待机点P1 Lifting Axis Standby Point P1
Feed_Batch_P2 提升轴上料高点P2 Lifting Axis Loading High Point P2
Feed_Batch_PoToMM 提升轴高度转换系数 Lifting Axis Height Conversion Factor
Feed_DoorAxis_Run_Len 防护门开关幅度 Safety Door Swing Range
Feed_LastTrayAddHeight 最后一盘料补充高度mm Final Reel Replenishment Height mm
Feed_Tranverse_P1 横移轴待机点P1 Traversing Axis Loading High Point P2
Feed_Tranverse_P10 横移轴B侧仓出库料盘放料点P10 Traversing Axis Module A Unloading Point P10
Feed_Tranverse_P2 横移轴料盘取料点P2 Traversing Axis Picking Point P2
Feed_Tranverse_P3 横移轴A侧仓放料点P3 Traversing Axis Module A Unloading Point P3
Feed_Tranverse_P4 横移轴B侧仓放料点P4 Traversing Axis Module B Unloading Point P4
Feed_Tranverse_P5 横移轴A侧仓待机点P5 Traversing Axis Module A Standby Point P5
Feed_Tranverse_P6 横移轴B侧仓待机点P6 Traversing Axis Module B Standby Point P
Feed_Tranverse_P7 横移轴A侧仓取料点P7 Traversing Axis Module A Unloading Point P7
Feed_Tranverse_P8 横移轴B侧仓取料点P8 Traversing Axis Module B Unloading Point P7
Feed_Tranverse_P9 横移轴A侧仓出库料盘放料点P9 Traversing Axis Module A Unloading Point P9
Feed_UpDown_P1 升降轴待机点P1 Vertical Axis Standby Point P1
Feed_UpDown_P2 升降轴料盘取料点P2 Vertical Axis Picking Point P2
Feed_UpDown_P3 升降轴A侧仓放料点P3 Vertical Axis Module A Loading Point P3
Feed_UpDown_P4 升降轴B侧仓放料点P4 Vertical Axis Module B Loading Point P4
Feed_UpDown_P5 升降轴A侧仓取料点P5 Vertical Axis Module A Loading Point P5
Feed_UpDown_P6 升降轴B侧仓取料点P6 Vertical Axis Module B Loading Point P6
Feed_UpDown_PoToMM 升降轴高度转换系数 Vertical Axis Height Conversion Factor
feeding_mechanism 上料机构 Loading Mechanism
flashing 闪烁 Flashing
FrmMain_tabc_tab_log 日志 Log
general_setting 通用设置 General Setting
get_reel_not_detect_material 取料后料叉{0}没有检测到物料无法继续,请检查 Retrieval Stop Because Gripper {0} Didn't Detect Material(s). Please Check.
height_abnormal 料盘高度异常，请人工处理! Reel Thickness Out Of Limit, Please Check!
height_setting 设置高度 Height Setting
imageIsNull 获取二维码图片为空 2D Code Picture Empty
in_out_bound 出入库 Inventory
in_out_debug_mode 进出库调试模式 Inventory Diagnostic Mode
in_out_test 库位测试 Location Testing
in_store_ng 入库NG Storage NG
inbound_ship 入库中 Storage
info 信息 Infomation
infomation 信息 Infomation
inlet_has_reel 出入料口有料，请检查 Material At Material Door, Please Check.
inlet_wait_reel_leave 入料口等待料盘离开 Waiting For Reel To Leave The Material Door
InOut_Axis 进出轴 Horizontal Axis
inout_has_reel 出入料口有料，无法放料. Material At Material Door, Unable To Release
InOutAxis_Position_P3 进出轴库位点取料点P3 Horizontal Axis Slot Picking Point P3
inoutlet_has_info_no_signal 出入料口有物料信息，信号未亮 Material Data At Material Door, Signal Not Lit.
institution 机构 Mechanism
io_debugging IO调试 IO Diagnoistic
learn 学习 Learn
ledstate_Alarm 报警 Alarm
ledstate_AlarmStop 停机报警 Shut Down Alarm
ledstate_HomeReset 复位 Reset
ledstate_InOut 出入库中 In Operation
ledstate_Running 运行 Run
ledstate_SystemPause 暂停 Pause
ledstate_THoutRange 温湿度超限 T&H Exceeded The Limit
ledstate_THoutRangeOver30m 温湿度超限30分钟 T&H Exceeded The Limit Over 30 min
left_silo A侧料仓 Module A
left_silo_fork 左料仓料叉 Module A Gripper
left_silo_inoutlet 左料仓出入料口 Module A Material Door
location_debug 库位调试 Location Calibration
log 日志 Log
Middle_Axis 旋转轴 Rotating Axis
MiddleAxis_Position_P2 旋转轴位置P2 Rotating Axis Position P2
module 模块 Module
monitor 监控 Monitor
ngbox_full NG料箱已满，请处理 Ng Box Is Full, Please Handle Manually.
no_air_pressure 无气压检测信号 No Air Pressure
no_feedback_from_server 没有收到服务器反馈 No Feedback From The Server
no_string 当前没有料串 No Stacker
not_detect_ngbox 未检测到NG箱,请检查 Ng Box Not Detected, Please Check
not_obtain_loc 未得到锁
not_started 未启动 Not Started
outbound_ship 出库中 Retrieval In Progress
outcome 结果 Result
posnum 库位号 Location No.
primary_device 主设备 Main Equip.
receive_data_timeout 等待接受数据超时 Data Receiving Time Out
reclaiming 取放料 Reclaiming
recognition 识别 Recognition
reel_transfer 仓内料盘转移 Reel Transfer
related_setting 相关设置 Related Setting
remind 提示 Notice
reset 重置 Reset
right_silo B侧料仓 Module B
right_silo_fork 右料仓料叉 Module B Gripper
right_silo_inoutlet 右料仓出入料口 Module B Material Door
safty_release_string 安全释放料串 Safely release the Stacker
safty_releaseed_string 料串已是释放状态 Stacker already released.
safty_releaseing_string 正在执行料串释放 Stacker Release In Progress.
save_failed 保存失败 Save Failed
save_success 保存成功 Saved
selCamera 请先选择相机 Please Select Camera First
select_camera 请选择相机 Please Select Camera
select_picture 请选择图片 Please Select Image
selImage 请先选择图片 Please Select Image First
servo_debugging 伺服调试 Servo Diagnoistic
staging 缓存状态 Buffering Status
step 步骤 Step
stop 停止 Stop
Store_Comp_P1 压紧轴待机点P1 Compression Axis Standby Point P1
Store_Comp_P2 压紧轴8mm盘压紧点P2 Compression Axis 8mm Reel Compression Point P2
Store_Comp_PH_MM 压紧轴库位高点偏移MM Compression Axis High Point Offset mm
Store_Comp_PoToMM 压紧轴每毫米脉冲 Compression Axis Pulse Per mm
Store_InOut_P1 进出轴待机点P1 Horizontal Axis Standby Point P1
Store_InOut_P2 进出轴入料口P2 Horizontal Axis Loading Point P2
Store_Middle_P1 旋转轴待机点P1 Rotating Axis Standby Point P1
Store_Middle_P2 旋转轴入料口P2 Rotating Axis Loading Point P2
Store_UpDown_P1 升降轴待机点P1 Vertical Axis Standby Point P1
Store_UpDown_P2 升降轴入料口高点P2 Vertical Axis Loading High Point P2
Store_UpDown_P3 升降轴入料口低点P3 Vertical Axis Loading Low Point P3
string 料串 Stacker
string_door_alarm 料串门异常 Material Door Abnormal
string_door_close 料串门已关闭 Material Door Closed
string_door_open 料串门已开启 Material Door Opened
string_ready_for_put 料串放料准备就绪 Stacker Ready To Unload
string_ready_get 料串取料准备就绪 Stacker Ready To Load
sureDelete 确定删除文件 Confirm Delete The File
sys_need_reset 系统需要重置 Please Reset The System
systemPause 系统暂停 Pause System
time 时间 Time
time_out 超时 Time out
title 提示 Reminder
Tranverse_Axis 横移轴 Traverse axis
tray_string_wrong_dir 料串可能放反，请检查 Stacker May Be In Wrong Direction, Please Check
UpDown_Axis 升降轴 Vertical Axis
UpDownAxis_IHPosition_P3 升降轴库位入料高点P3 Vertical Axis Slot Loading High Point P3
UpDownAxis_ILPosition_P4 升降轴库位入料低点P4 Vertical Axis Slot Loading Low Point P4
wait_arrive_target 等待到达目的位置. Waiting To Reach The Target Position.
wait_door_open 等待门开 Wait For The Door To Open
wait_for_inbound 等待入库物料 Wait For The Material
wait_get_height_ok 等待测高完成 Wait For The Height Measurement To Complete
wait_leave_scan_area 等待横移轴离开扫码区域 Wait Traversing Axis Leave The Scanning Area
wait_server_return_loc 等待服务器返回库位 Wait For The Server To Return The Location
wait_silo_idle 等待料仓空闲 Wait The Box To Be Free.
wait_tranver_axis_leave 等待横移轴离开 Wait For The Traversing Axis To Leave
Res0001.b9534cf3 ...清除报警1 ...Clear Alarm1
Res0002.99b78abc ...清除报警2 ...Clear Alarm2
Res0003 取料后料叉{0}没有检测到物料无法继续,请检查. No Material Detected on Gripper {0}, Please Check.
Res0004 获取二维码图片为空 Get 2D Code Picture Empty
Res0005 确定删除文件： Confirm To Delete The File:
Res0006 读取文件失败： Failed To Read The File:
Res0007 料叉上的物料丢失数据,请人工处理 Material On Gripper Missing Data. Please Handle It Manually.
Res0008.226d8802 ...使能成功 ... Enable Succeed
Res0009 料串正在上升 The Stacker Ascending
Res0010 料串正在下降 The Stacker Descending
Res0010.5af520a6 料串识别异常 Stacker Identification Abnormal
Res0011.f6cfcb3a 检测到监控相机未启动 Monitor Camera Not Activated
Res0012.ebec6459 ...尝试使能失败 ... Enable Failed
Res0013.061049bb 当前料仓类别为 Current BOX Type
Res0014.86c206f3 请检查料串类别 Please Check The Stacker Type
Res0015.89c0e996 当前湿度为 Current Humidity
Res0016.4ff2b4bf 超出设定值 Exceed The Set Value
Res0017.93c12745 入库失败 Storage Failed
Res0018.7f6dfad7 ...伺服连接中 Servo Connecting
Res0019.7e669458 当前有出库任务,不能入库,请取出入库料串 There's unloading task, can not loading. Please take out the loading stacker.
Res0020.d812e75f 没有收到服务器反馈 No Feedback From The Server
Res0021.60c85b4b 轴 Axis
Res0021.fce507bd 未找到料仓 Not found the BOX
Res0022.0c33436f 绝对运动，目标位置 Absolute Motion, Target Position
Res0022.19a3dccf 收到入库命令： Storage Command Received:
Res0023.3c690849 ，入库失败！ Stroage Failed
Res0023.87979227 等待 Waiting
Res0024.d7647f48 时间等待 Waiting Time
Res0025.21157cbf 毫秒 ms
Res0026.3802ba42 ORG信号 ORG Signal
Res0027.f4a8d691 料盘高度 Reel Thickness
Res0028.84e7c741 批量轴上升到上料点 Batch Axis Up To Loading Position
Res0029.ed4de1c6 扫码完成 Completed The Scan
Res0030.2ce2816c 入库料盘可能没有放到位,请检查A侧暂存位及吸盘 Storage reels may not be placed in position, please check the temporary storage location of Module A and vacuum gripper.
Res0031.887cf0e5 入库料盘可能没有放到位,请检查B侧暂存位及吸盘 Storage reels may not be placed in position, please check the temporary storage location of Module B and vacuum gripper.
Res0032.1bf30741 第{0}次尝试打开轴:{1} Try To Enable Axis: {1} For {0} Times
Res0033.814c87d5 ...伺服忙碌,急停{0}次 ... Servo Busy, EM Stop {0} Times
Res0034.c054671f 使能成功 Enable Success
Res0035.94b55bdf 尝试使能失败 Enable Failed
Res0036.abdd7b6b 伺服连接中 Servo Connecting
Res0037.2bf5c941 打开轴 Enable The Axis
Res0038.33d2a704 失败 Failed
Res0039.a6087377 清理报警 Clear Alarm
Res0040.84ab6e6f 目标位置 Target Location
Res0041.5eac11b4 当前位置 Current Location
Res0042.53ce14b2 误差过大，需要报警 Excessive Errors. Alarm
Res0043.fdfe522c 返回原点失败 Back To Origin Failed
Res0044.95840864 轴(0)存在报警,清除失败 Axis (0) Alarm, Alarm Clear Failed
Res0045.b5876296 轴(0)存在报警,清除成功 Axis (0) Alarm, Alarm Clear Succeed
Res0046.95729a30 旋转或升降轴在运动,进出轴不可运动 Vertical Axis In Motion, Horizontal Axis Cannot Move.
Res0048.ecb2a5c9 默认模块 Default Module
Res0051.a2f722e6 进气压力报警 Intake Air Pressure Alarm
Res0052.bd8202a6 出库未成功取出料盘 Failed To Retrieve Reels From Stacker
Res0055.7733d487 料串防护门 Stacker Protection Door
Res0057 密码不正确请重新输入! Password Incorrect, Please Re-Enter!
Res0060.86bdaf03 当前有出库任务,但没有出库料串,请更换为出库料串 Please Replace With Retrieval Stacker
Res0062.a06c3285 空闲中 Free
Res0063.ed70deb7 找不到尺寸对应的库位 Not Found The Corresponding Material Location
Res0064.5bd46114 设置盘高度不能超过料格高度 Reel Thickness Cannot Exceed The Magazine Height
Res0065.f50c14a0 设置盘宽度不能超过料格宽度 Reel Thickness Cannot Exceed The Magazine Width
Res0066.030d328c 出库物料为Tray,料串不符,请更换Tray料串 Please Replace The Tray Magazine
Res0067.4ca34bf8 出库物料为Reel,料串不符,请更换Reel料串 Please Replace The Stacker
Res0068 旧密码不正确! Old Password Wrong!
Res0069 两次输入的新密码不一致,请确认! New Password Entered Not The Same, Please Confirm!
Res0070 新密码不能为空! New Password Cannot Be Empty!
Res0071 密码修改成功! Password Change Successfully!
Res0071.0f0870b1 使用P1速度 Use P1 Velocity
Res0072.c6f05119 使用P2速度 Use P2 Velocity
Res0073.6af4424f 料串取料失败,请检查后复位设备 Failed To Get Material From Stacker, Please Check And Reset.
Res0074.ee7ca58f 料盘吸取失败,请手动取走A仓缓存位料盘,取走后按复位按钮继续. Please Remove The Reel Of Module A And Press The Reset Button To Continue.
Res0075.a23f9600 料盘吸取失败,请手动取走B仓缓存位料盘,取走后按复位按钮继续. Please Remove The Reel Of Module B And Press The Reset Button To Continue.
Res0092.3cd6b0b0 线体推送气缸未在后退端 Conv. Cyl Not At The Backward End
Res0096.402c0419 未识别到有效二维码 No Vaild 2D Code.
Res0097.0c6bcbff 已完成扫码,二维码与上一次一致 Scanning completed. 2D code is the same as the previous one
Res0098.26172ea1 扫码超时 Scan Timeout.
Res0101.4e5dfb85 获取料盘宽度异常 Get Reel Width Abnormal
Res0102.0a712e16 未检测到盘宽 No Width Detetcted
Res0104.4c0f7033 获取库位失败 Failed To Get Material Location
Res0105.c80c9142 料盘NG,请手动取走吸盘上的料盘 Reel NG, Please Manually Remove The Reel On The Vacuum Gripper
Res0106.183b0d51 等待手动选择入库库位 Waiting For Select Material Location Manually
Res0107.306d8ecb 服务器返回库位超时 Server Return To Location Timeout.
Res0110.31ceec2b 横移轴等待扫码空闲 The Traversing Axis Waiting For Scaning
Res0116.7ab9e68d 13/15寸料串 13/15 Inch Stacker
Res0117.05c26f58 7寸盘料串 7 Inch Stacker
Res0118.c1ec2c14 TRAY料串 Tray Magazine
Res0122 入库未找到库位： No Storage Location.
Res0123 出入库轴 Horizontal Axis
Res0124.897f2271 系统暂停 Pause
Res0135 IO板卡初始化失败 IO Card Failed to Initialize.
Res0137 打开调试模式 Start Diagnostic Mode
Res0139.7be9fa71 被禁用 Disabled
Res0141 找不到库位配置文件 No Location Configuration File.
Res0143 进出轴不在待机点时无法移动旋转轴 Cannot move the rotating axis when the hotizontal axis is not at the standby point.
Res0144 进出轴不在待机点时无法移动升降轴 Cannot move the vertical axis when the hotizontal axis is not at the standby point.
Res0144.d6205b5e 出料门口有料无法放料. There is material at the material door and cannot retrieve.
Res0145.f3bc718b 等待出料口门开启. Waiting For Material Door To Open.
Res0146 已忽略 Ignored
Res0149.205bb5b7 当前温度为 Current Temperature Is
Res0151 料仓忙碌中,无法启动 Cannot start when the Tower is busy.
Res0152 收到出库任务,但料叉上有料,无法启动,请检查 Retrieval Task Received. Cannot Start Because Of The Material On The Gripper. Please Check.
Res0153 料仓正在出入库中,无法出库 The Smd BOX Is Processing Inventory And Cannot Retrieve.
Res0155.d54870e1 未处于运行状态 Not In Operation
Res0156 服务器连接异常 Server Connection Error
Res0156.2c419358 出库队列 Retrieval Queue
Res0158.1becad56 温湿度 T&H
Res0159.4bc51f00 出料口 Retrieval Door
Res0162 空闲中 Free
Res0165 请先选择运动轴 Please Select the Axis.
Res0166 警告 Warning
Res0167 提示 Notice
Res0168 请先输入正确的速度 Please Enter The Correct Velocity
Res0169 状态监控 Status Monitoring
Res0170 错误码： Error Code:
Res0171 伺服尚未使能 Servo Disabled.
Res0172 伺服警报状态中 In Servo Alarm Status
Res0173 无法操作 Unable To Operate.
Res0174 条码首字母不能为空 Initial Character Cannot Be Empty
Res0174.c65f565d 料叉上的物料丢失数据.无厚度信息 Material at Gripper Data Missing, No Thickness Info
Res0175 物理厚度 Actual Thickness
Res0176 自动弃用 Automatic Discard
Res0178 设备加载中,请稍后... Loading...
Res0179.116dbfbb 请放入第二盘料. Please Load The Following Material.
Res0183 机器尚在运行,不能退出,请先停止运行. Please Stop Running Before Exit.
Res0183.f55f1736 设备 Equipment
Res0191 运行库位校准程序前,需要先停止料仓的运行 Please Stop Operation Before Location Calibration.
Res0195 启动 Start
Res0196 恢复运行 Resume
Res0197 暂停运行 Pause
Res0198 升降轴位置调试： Vertical Axis Position Diagnostic
Res0199 检测信号 Signal Detection
Res0200 请输入正确的速度 Please Enter The Correct Velocity
Res0202 伺服状态: Servo Info
Res0203 已使能 Enabled
Res0204 未使能 Disabled
Res0205 原点状态: Home Status:
Res0206 已完成 Completed
Res0207 未完成 Not Completed
Res0208 忙碌状态: Busy Status:
Res0209 忙碌中 Busy
Res0210 系统正在运行,不能手动控制伺服 The Servo Cannot Be Controlled Manually When The System Is Running
Res0211 库位表解析错误 Material Location List Parse Error
Res0213 请先启动料仓！ Please turn on the SMD BOX first!
Res0214 停止自动库位测试 Stop Auto Cycle Test
Res0215 自动库位测试 Auto Cycle Test
Res0216 自动出入库过程会再料盘送至出口后自动停止. Auto Storage Will Stop When Material Arrived The Door
Res0217 入库料盘没有准备好,无法启动 Loading Material Not Ready.
Res0218 确定开始自动库位测试？\n请确保料仓库位全部为空. Please Make Sure That The Locations Are All Empty Before Start The Auto Cycle Test.
Res0219 停止自动库位测试！ Stop Auto Cycle Test!
Res0220 状态,优先级从大到小 Status, From High To Low Priority
Res0221 绿灯 Green
Res0222 黄灯 Yellow
Res0223 红灯 Red
Res0224 无动作 Waiting
Res0225 关 Turn Off
Res0226 开 Turn On
UILanguageTooles/TranslateLibrary.cs
......@@ -16,6 +16,8 @@ namespace UILanguageTooles
{
var lng = Path.GetFileNameWithoutExtension(d);
var ff = Directory.GetFiles(d, "*.lngres");
Array.Sort(ff);
Array.Reverse(ff);
foreach (var f in ff)
{
......
UILanguageTooles/UILanguageTooles.csproj
......@@ -114,6 +114,7 @@
<None Include="Library\en-US\03.lngres">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</None>
<None Include="Library\en-US\11.lngres" />
<None Include="Library\ja-JP\09.lngres">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</None>
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!