AboutBox1_tableLayoutPanel_labelCompanyName_Text	上海挚锦科技有限公司	Neotel
AboutBox1_tableLayoutPanel_labelProductName_Text	自动扫码贴标机	NEO SCAN PLUS
AboutBox1_tableLayoutPanel_labelVersion_Text	版本 	Version
AboutBox1_tableLayoutPanel_okButton_Text	确定	OK
AxisMoveControl_groupAxis_groupBox1_btnGetAlarm_Text	读报状态	Report:
AxisMoveControl_groupAxis_groupBox1_label10_Text	BUSY状态:	BUSY state:
AxisMoveControl_groupAxis_groupBox1_label11_Text	回零状态:	ZRN Status:
AxisMoveControl_groupAxis_groupBox1_label22_Text	正极限信号:	Positive limit signal:
AxisMoveControl_groupAxis_groupBox1_label24_Text	负极限信号:	Negative limit signal:
AxisMoveControl_groupAxis_groupBox1_label3_Text	报警状态:	Alarm state:
AxisMoveControl_groupAxis_groupBox1_label5_Text	伺服状态:	Servo Info
AxisMoveControl_groupAxis_groupBox1_label6_Text	原点信号:	Home signal:
AxisMoveControl_groupAxis_groupBox1_Text	状态	Status:
AxisMoveControl_groupAxis_groupBox2_label2_Text	实际加速度:	Acceleration:
AxisMoveControl_groupAxis_groupBox2_label4_Text	回原状态:	Back To Origin Status:
AxisMoveControl_groupAxis_groupBox2_label50_Text	规划模式:	Planning mode:
AxisMoveControl_groupAxis_groupBox2_label52_Text	规划位置:	Planning location:
AxisMoveControl_groupAxis_groupBox2_label53_Text	规划速度:	Planning speed:
AxisMoveControl_groupAxis_groupBox2_label55_Text	实际位置:	actual position:
AxisMoveControl_groupAxis_groupBox2_label56_Text	实际速度:	Actual speed:
AxisMoveControl_groupAxis_groupBox2_lblAlarmcode_Text	错误码:160	Error Code: 160
AxisMoveControl_groupAxis_groupBox2_lblALM_Text	报警	Alarm
AxisMoveControl_groupAxis_groupBox2_lblBUSY_Text	忙碌	Busy
AxisMoveControl_groupAxis_groupBox2_lblEMG_Text	急停	Emergency stop
AxisMoveControl_groupAxis_groupBox2_lblINP_Text	到位	Ready
AxisMoveControl_groupAxis_groupBox2_lblNEL_Text	负极限	Negative limit
AxisMoveControl_groupAxis_groupBox2_lblORG_Text	原点	Origin
AxisMoveControl_groupAxis_groupBox2_lblPEL_Text	正极限	Positive limit
AxisMoveControl_groupAxis_groupBox2_lblSvOn_Text	伺服	Servo
AxisMoveControl_groupAxis_groupBox2_lblWARN_Text	警告	Warning
AxisMoveControl_groupAxis_groupBox2_Text	轴状态监控	Axis status monitor
AxisMoveControl_groupAxis_panel1_btnAddMove_Text	点动+	Count +
AxisMoveControl_groupAxis_panel1_btnAxisAMove_Text	绝对运动	Abosolute move
AxisMoveControl_groupAxis_panel1_btnAxisReturnHome_Text	原点返回	Back to home
AxisMoveControl_groupAxis_panel1_btnAxisRMove_Text	相对运动	Relative move
AxisMoveControl_groupAxis_panel1_btnAxisStop_Text	 停止运动	Stop Running
AxisMoveControl_groupAxis_panel1_btnAxisVMove_Text	匀速运动	uniform move
AxisMoveControl_groupAxis_panel1_btnCloseAxis_Text	关闭伺服	Close servo
AxisMoveControl_groupAxis_panel1_btnComAlarmClear_Text	清除报警	Clear alarm
AxisMoveControl_groupAxis_panel1_btnDelMove_Text	点动-	Count -
AxisMoveControl_groupAxis_panel1_btnOpenAxis_Text	打开伺服	Open servo
AxisMoveControl_groupAxis_panel1_btnReadPosition_Text	读取位置	Update location
AxisMoveControl_groupAxis_panel1_label1_Text	点动速度：	Inching speed
AxisMoveControl_groupAxis_panel1_label45_Text	端口号:	Port number:
AxisMoveControl_groupAxis_panel1_label46_Text	地址:	Address:
AxisMoveControl_groupAxis_panel1_label47_Text	目标速度:	Set Velocity
AxisMoveControl_groupAxis_panel1_label48_Text	目标位置:	target location:
AxisMoveControl_groupAxis_panel1_label49_Text	AC伺服:	AC server:
AxisMoveControl_groupAxis_panel1_label8_Text	实时位置:	Actual position:
AxisMoveControl_groupAxis_panel1_linkLabel1_Text	复制	Copy
AxisMoveControl_groupAxis_Text	伺服运动	Servo motor
Form1_btn_run_Text	启动	Start
Form1_btn_stop_Text	停止	Stop
Form1_tabControl1___AgvControl_checkBox1_Text	手动操作	Manual Operation
Form1_tabControl1___AgvControl_groupBox_left_button_Leftleavefull_Text	请求取满料串	Take Full Stacker
Form1_tabControl1___AgvControl_groupBox_left_button_leftneedempty_Text	请求送空料串	Put Empty Stacker
Form1_tabControl1___AgvControl_groupBox_left_Text	左侧	Left
Form1_tabControl1___AgvControl_groupBox_right_button_rightleavefull_Text	请求取空料串	Take Empty Stacker
Form1_tabControl1___AgvControl_groupBox_right_button_rightneedempty_Text	请求送满料串	Put Full Stacker
Form1_tabControl1___AgvControl_groupBox_right_Text	右侧	Right
Form1_tabControl1___AgvControl_groupBox2_lblCurMissionId_Text	当前的mission id	Current Mission ID
Form1_tabControl1___AgvControl_groupBox2_lblCurRunMissionId_Text	正在运行的mission id	Running Mission ID
Form1_tabControl1___AgvControl_groupBox2_lblMissionResult_Text	mission运行结果	Running Result
Form1_tabControl1___AgvControl_groupBox2_lblMissionRunstate_Text	mission运行状态	Running Status
Form1_tabControl1___AgvControl_groupBox2_Text	AGV状态[127.0.0.1]	AGV Status[127.0.0.1]
Form1_tabControl1___AgvControl_groupBox3_button1_Text	手动任务测试	AGV Calling Check
Form1_tabControl1___AgvControl_groupBox3_button2_Text	重置呼叫状态	Reset Calling Status
Form1_tabControl1___AgvControl_groupBox3_label1_Text	移动到待机点的任务编号：	Move To Standby Point Task NO.:
Form1_tabControl1___AgvControl_groupBox3_label3_Text	移动到右侧的任务编号：	Move To Right Side Task NO.:
Form1_tabControl1___AgvControl_groupBox3_label4_Text	移动到左侧的任务编号：	Move To Left Side Task NO.:
Form1_tabControl1___AgvControl_groupBox3_label5_Text	料串流出AGV的任务编号：	Take Stacker To AGV Task NO.:
Form1_tabControl1___AgvControl_groupBox3_label6_Text	料串流入AGV的任务编号：	Put Stacker To AGV Task NO.:
Form1_tabControl1___AgvControl_groupBox3_label7_Text	任务编号：	Task NO.:
Form1_tabControl1___AgvControl_groupBox3_Text	手动发送任务	Send Task
Form1_tabControl1___AxisControl_panel1_configControl1_btnSavePos_Text	全部保存	Save All
Form1_tabControl1___AxisControl_panel1_configControl1_groupBox3_Text	点位列表	Location List
Form1_tabControl1___IOControl_groupBox1_btnCloseAll_Text	关闭所有DO	Close all DO.
Form1_tabControl1___IOControl_groupBox1_btnCloseDO_Text	关闭	Close
Form1_tabControl1___IOControl_groupBox1_btnOpenDo_Text	打开	ON
Form1_tabControl1___IOControl_groupBox1_btn打开设备光源_Text	打开设备光源	Open equipment light.
Form1_tabControl1___IOControl_groupBox1_btn打开相机光源_Text	打开相机光源	Open camera light.
Form1_tabControl1___IOControl_groupBox1_btn关闭设备光源_Text	关闭设备光源	Close equipment light.
Form1_tabControl1___IOControl_groupBox1_btn关闭相机光源_Text	关闭相机光源	Close camera light.
Form1_tabControl1___IOControl_groupBox1_btn夹爪放松_Text	夹爪放松	Gripper Remove
Form1_tabControl1___IOControl_groupBox1_btn夹爪回原_Text	夹爪回原	Gripper Turn Back
Form1_tabControl1___IOControl_groupBox1_btn夹爪夹紧_Text	夹爪夹紧	Gripper Compression
Form1_tabControl1___IOControl_groupBox1_btn右侧电滚筒进入_Text	右侧电滚筒进入	Right Electric Roller Enter
Form1_tabControl1___IOControl_groupBox1_btn右侧电滚筒停止_Text	右侧电滚筒停止	Right Electric Roller Stop
Form1_tabControl1___IOControl_groupBox1_btn右侧电滚筒退出_Text	右侧电滚筒退出	Right Electric Roller Exit
Form1_tabControl1___IOControl_groupBox1_btn右侧阻挡上升_Text	右侧阻挡上升	Right Barrier Up
Form1_tabControl1___IOControl_groupBox1_btn右侧阻挡下降_Text	右侧阻挡下降	Right Barrier Down
Form1_tabControl1___IOControl_groupBox1_btn左侧电滚筒进入_Text	左侧电滚筒进入	Left Electric Roller Enter
Form1_tabControl1___IOControl_groupBox1_btn左侧电滚筒停止_Text	左侧电滚筒停止	Left Electric Roller Stop
Form1_tabControl1___IOControl_groupBox1_btn左侧电滚筒退出_Text	左侧电滚筒退出	Left Electric Roller Exit
Form1_tabControl1___IOControl_groupBox1_btn左侧阻挡上升_Text	左侧阻挡上升	Left Barrier Up
Form1_tabControl1___IOControl_groupBox1_btn左侧阻挡下降_Text	左侧阻挡下降	Left Barrier Down
Form1_tabControl1___IOControl_groupBox1_label14_Text	地址:	Address:
Form1_tabControl1___IOControl_groupBox1_label5_Text	定时(ms):	Time(ms):
Form1_tabControl1___IOControl_groupBox1_Text	DO写入	DO write
Form1_tabControl1___IOControl_groupBox3_Text	DI列表	DI list
Form1_tabControl1___IOControl_groupBox4_Text	DO列表	DO list
Form1_tabControl1___SettingControl_btn_labelDebug_Text	贴标调试	Relabeling Debugging
Form1_tabControl1___SettingControl_chbAutoRun_Text	开机自启动	Auto Power On
Form1_tabControl1___SettingControl_groupBox1_btn_labeledit_Text	标签编辑	Label Edit
Form1_tabControl1___SettingControl_groupBox1_label1_Text	打印机	Printer
Form1_tabControl1___SettingControl_groupBox1_label2_Text	标签名	Label Name
Form1_tabControl1___SettingControl_groupBox1_Text	打印设置	Print Settings
Form1_tabControl1___SettingControl_groupBox2_listEdit_pn_btn_add_Text	添加	Add
Form1_tabControl1___SettingControl_groupBox2_listEdit_pn_btn_cel_Text	取消	Cancel
Form1_tabControl1___SettingControl_groupBox2_listEdit_pn_btn_del_Text	删除	Delete
Form1_tabControl1___SettingControl_groupBox2_Text	PN匹配规则	PN Matching Test
Form1_tabControl1___SettingControl_groupBox3_listEditControl1_btn_add_Text	添加	Add
Form1_tabControl1___SettingControl_groupBox3_listEditControl1_btn_cel_Text	取消	Cancel
Form1_tabControl1___SettingControl_groupBox3_listEditControl1_btn_del_Text	删除	Delete
Form1_tabControl1___SettingControl_groupBox3_Text	QTY匹配规则	QTY Matching Test
Form1_tabControl1___SettingControl_groupBox4_btn_codetest_Text	匹配	Matching
Form1_tabControl1___SettingControl_groupBox4_Text	条码匹配测试	Barcode Matching Test
Form1_tabControl1_tabPage1_btn_leftempty_Text	左侧\r\n手动清空	Left Side \r\n Manual Empty
Form1_tabControl1_tabPage1_btn_maulstart_Text	右侧\r\n手动上料	Right Side \r\n Manual material loading
Form1_tabControl1_tabPage1_btn_PauseBuzzer_Text	本次暂停警报器响声	Alarm is paused.
Form1_tabControl1_tabPage1_btn_releaseleftshelf_Text	安全释放左侧料串	Safety Release Left Stacker
Form1_tabControl1_tabPage1_btn_releaserightshelf_Text	安全释放右侧料串	Safety Release Right Stacker
Form1_tabControl1_tabPage1_cb_EnableBuzzer_Text	使用蜂鸣器	Enable buzzer.
Form1_tabControl1_tabPage1_cb_IgnoreGratingSignal_Text	忽略安全光栅	Skip safety light curtain.
Form1_tabControl1_tabPage1_cb_IgnoreSafecheck_Text	忽略安全检查(含安全光栅)	Skip safety check including safety light curtain.
Form1_tabControl1_tabPage1_groupBox1_Text	运行状态	Running Status
Form1_tabControl1_tabPage1_Text	信息	Info.
menuStrip1_关于ToolStripMenuItem_Text	关于	About
menuStrip1_设备操作ToolStripMenuItem_Text	设备操作	Operation
menuStrip1_语言toolStripMenuItem_Text	语言	Language
设备操作ToolStripMenuItem_二维码识别调试ToolStripMenuItem_Text	二维码识别调试	QR code recognition debugging
设备操作ToolStripMenuItem_启用调试模式ToolStripMenuItem_Text	启用配置模式	Configuration Mode On
设备操作ToolStripMenuItem_退出ToolStripMenuItem_Text	退出	Exit
Res0001	关于 {0}	About {0}
Res0002	版本 {0}	Version {0}
Res0003	信息	Info.
Res0004	时间	Time
Res0005	模块	Module
Res0006	步骤	Step
Res0007	日志	Log
Res0008	IO调试	IO Debugging
Res0009	伺服调试	Servo debug
Res0010	相关设置	Related Setting
Res0011	启用配置模式	Configuration Mode On
Res0012	停用配置模式	Disable Configuration Mode
Res0013	暂停运行	Pause
Res0014	恢复运行	Restart
Res0015	启动	Start
Res0016	重置	Reset
Res0017	扫码还没完成,无法打开调试!请稍后再试.	Please debug after the barcode scanning is done.
Res0018	料串已是释放状态	Stacker is released.
Res0019	正在执行料串释放	Stacker is being released.
Res0020	左侧料串正在提升或下降, 不能释放	Cannot be released during the left stacker down or up.
Res0021	左侧料串等待释放中({0})	The left stacker is waiting to be released.
Res0022	安全释放左侧料串	Safety Release Left Stacker
Res0023	右侧料串当前没有就位, 不能释放	Cannot be released when the right stacker is not ready.
Res0024	右侧料串等待释放中({0})	The right stacker is waiting to be released.
Res0025	安全释放右侧料串	Safety Release Right Stacker
Res0026	右侧料串正在运行,不能手动上料	Cannot load material manually when the right stacker is running.
Res0027	没有检测到料串,不能手动上料	Cannot load material manually when there is no stacker.
Res0028	左侧料串正在运行,不能手动上料	Cannot load material manually when the left stacker is running.
Res0029	点位列表	Location List
Res0030	全部保存	Save All
Res0031	添加	Add
Res0032	修改	Edit
Res0033	确定要删除:\"{0}\"?	To delete or not to delete:\"{0}\"?
Res0034	警告	Warning
Res0035	已呼叫Agv，不能重复呼叫	AGV is being called.
Res0036	移载	Reel Transfer
Res0037	温湿度传感器[	Temperature/Humidity Sensor
Res0038	本机IP:[	Local IP:[
Res0039	右侧取料	Pick material from right side.
Res0040	左侧空闲中	Left stacker is free.
Res0041	本机IP	Local IP
Res0042	移栽	Reel Transfer
Res0043	料串已满	The stacker is full.
Res0044	已使用	Used
Res0045	当前ReelID:	Current Reel ID:
Res0046	无料串	No stacker.
Res0047	抓料失败请手动处理,请将料盘放入:NG箱,按右侧按钮继续	Material Picking failed. Please put the material into NG box and press "continue" button.
Res0048	抓料失败请手动处理,请将料盘放入: 左侧料串,按右侧按钮继续	Material Picking failed. Please put the material into left stacker and press "continue" button.
Res0049	等待左侧允许放料	Waiting for the left side to be allowed to storage material.
Res0050	等待夹爪放松	Waiting for the gripper to remove.
Res0051	左侧放料	Pick material from left side.
Res0052	贴标	Relabeling
Res0053	重置	Reset
Res0054	可能与贴标Y轴干涉	It might interfere with relabeling Y-axis.
Res0055	可能与旋转轴干涉	It might interfere with rotating axis.
Res0056	可能与贴标Z轴干涉	It might interfere with relabeling Z-axis.
Res0057	用户暂停	Pause
Res0058	安全光栅被遮挡	Safety Light Curtain is covered.
Res0059	右侧料串已空,等待取走料串	Please take away the empty right stacker.
Res0060	作侧料串已满,等待取走料串	Please take away the full left stacker.
Res0061	[已忽略]	[Ignored]
Res0062	没有检测到NG料箱	No NG box.
Res0063	没有检测打印机	No printer.
Res0064	左后门没有关闭	The left rear door is not closed
Res0065	右后门没有关闭	The right rear door is not closed
Res0066	急停中	Emergency stop
Res0067	系统需要重置	The system need to be reset.
Res0068	气压不足	Air pressure is insufficient.
Res0069	有料串,已放置{0}张料盘	The stacker is ready. {0} reels has been placed.
Res0070	Agv调试	AGV Debugging
Res0072	标签已打印,当前ReelID:	Label is printed. Current Reel ID:
Res0073	等待标签打印	Waiting label printing…
Res0074	等待中	Waiting…
Res0188	电夹爪通讯失败:{0}	Gripper Communication Error:{0}
Res0189	IO板卡初始化失败	IO card  failed to initialize.
Res0190	打开配置模式	Configuration Mode On
Res0192	夹爪夹紧	Gripper Compression
Res0193	夹爪放松	Gripper Remove
Res0194	请先选择运动轴	Please choose the axis.
Res0195	警告 	Warning
Res0196	点动+ 	Jogging+
Res0197	点动- 	Jogging-
Res0198	提示	Tips
Res0199	请先输入正确的速度	Please enter the correct speed.
Res0200	状态监控	Condition Monitoring
Res0201	错误码：	Error Code: 
Res0202	伺服尚未使能	Servo is disabled.
Res0203	伺服警报状态中	In servo alarm status
Res0204	无法操作	Unable to operate.
Res0216	打印机	Printer