Skip to content

刘韬 / SO20031_TinStorage

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 0a13027d 由 刘韬
选项

1

1 个父辈 8fbd789e
内嵌 并排
正在显示 18 个修改的文件 包含 385 行增加 和 120 行删除
Common/Runtime_Step.cs
...@@ -24,7 +24,7 @@ namespace OnlineStore ...@@ -24,7 +24,7 @@ namespace OnlineStore
/// <summary> /// <summary>
/// 标签已获取 /// 标签已获取
/// </summary> /// </summary>
LabelGot, //LabelGot,
/// <summary> /// <summary>
/// 标签中 /// 标签中
/// </summary> /// </summary>
......
DeviceLibrary/DeviceLibrary/LimitedRotary.cs
...@@ -49,7 +49,7 @@ namespace DeviceLibrary ...@@ -49,7 +49,7 @@ namespace DeviceLibrary
} }
} }
Task<bool> work; Task<bool> work;
public Task<bool> TurnToEnd(bool isHorizontal,bool needclamp=false) public Task<bool> TurnToEnd(bool isHorizontal,bool needclamp=false, double speedratio = 1)
{ {
return work = Task.Run(() => return work = Task.Run(() =>
{ {
...@@ -79,6 +79,7 @@ namespace DeviceLibrary ...@@ -79,6 +79,7 @@ namespace DeviceLibrary
} }
} }
else { else {
speedratio = 1;
RobotManage.mainMachine.CylinderMove(null, IO_Type.Tin_Dock_Rotate_Release, IO_Type.Tin_Dock_Rotate_Clamp, IO_VALUE.LOW); RobotManage.mainMachine.CylinderMove(null, IO_Type.Tin_Dock_Rotate_Release, IO_Type.Tin_Dock_Rotate_Clamp, IO_VALUE.LOW);
while (!IOManager.IOValue(IO_Type.Tin_Dock_Rotate_Clamp).Equals(IO_VALUE.LOW)) while (!IOManager.IOValue(IO_Type.Tin_Dock_Rotate_Clamp).Equals(IO_VALUE.LOW))
{ {
...@@ -90,7 +91,7 @@ namespace DeviceLibrary ...@@ -90,7 +91,7 @@ namespace DeviceLibrary
len = len * -1; len = len * -1;
if (!axisBean.IsServeoOn) if (!axisBean.IsServeoOn)
axisBean.Open(true, out string msg); axisBean.Open(true, out string msg);
axisBean.RelMove(len, (double)upspeed); axisBean.RelMove(len, (double)upspeed* speedratio);
//moveInfo.log($"{checkio}"); //moveInfo.log($"{checkio}");
while (!IOManager.IOValue(checkio).Equals(IO_VALUE.HIGH)) while (!IOManager.IOValue(checkio).Equals(IO_VALUE.HIGH))
{ {
...@@ -127,7 +128,7 @@ namespace DeviceLibrary ...@@ -127,7 +128,7 @@ namespace DeviceLibrary
}); });
} }
public Task TurnWork; public Task TurnWork;
public Task TurnDegree(int degree) { public Task TurnDegree(int degree, double speedratio = 1) {
return TurnWork=Task.Run(()=> return TurnWork=Task.Run(()=>
{ {
...@@ -149,7 +150,7 @@ namespace DeviceLibrary ...@@ -149,7 +150,7 @@ namespace DeviceLibrary
TurnToEnd(true).Wait(); TurnToEnd(true).Wait();
} }
//moveInfo.log($"len:{len}"); //moveInfo.log($"len:{len}");
axisBean.RelMove(len*-1, (double)upspeed); axisBean.RelMove(len*-1, (double)upspeed* speedratio);
Task.Delay(50).Wait(); Task.Delay(50).Wait();
while (axisBean.IsBusy) { while (axisBean.IsBusy) {
Task.Delay(50).Wait(); Task.Delay(50).Wait();
...@@ -202,7 +203,7 @@ namespace DeviceLibrary ...@@ -202,7 +203,7 @@ namespace DeviceLibrary
TurnToEnd(false).Wait(); TurnToEnd(false).Wait();
}); });
} }
public void TurnDouble() public void TurnDouble(double speedratio = 1)
{ {
TurnWork = Task.Run(() => TurnWork = Task.Run(() =>
{ {
...@@ -226,9 +227,9 @@ namespace DeviceLibrary ...@@ -226,9 +227,9 @@ namespace DeviceLibrary
{ {
Task.Delay(100).Wait(); Task.Delay(100).Wait();
} }
TurnToEnd(true, true).Wait(); TurnToEnd(true, true, speedratio).Wait();
TurnToEnd(false, false).Wait(); TurnToEnd(false, false).Wait();
TurnToEnd(true, true).Wait(); TurnToEnd(true, true, speedratio).Wait();
//TurnToEnd(false, false).Wait(); //TurnToEnd(false, false).Wait();
//TurnDegree(-20).Wait(); //TurnDegree(-20).Wait();
RobotManage.mainMachine.CylinderMove(null, IO_Type.Tin_Dock_Rotate_Release, IO_Type.Tin_Dock_Rotate_Clamp, IO_VALUE.LOW); RobotManage.mainMachine.CylinderMove(null, IO_Type.Tin_Dock_Rotate_Release, IO_Type.Tin_Dock_Rotate_Clamp, IO_VALUE.LOW);
......
DeviceLibrary/DeviceLibrary/ServerCommunication.cs
...@@ -471,6 +471,9 @@ namespace DeviceLibrary ...@@ -471,6 +471,9 @@ namespace DeviceLibrary
//postId格式BoxId#位置 //postId格式BoxId#位置
string posId = data[ParamDefine.posId].ToString(); string posId = data[ParamDefine.posId].ToString();
string usedCountstr= data["usedCount"].ToString(); string usedCountstr= data["usedCount"].ToString();
string expireDate= data["expiredDate"].ToString();
string exposureStartDate = data["exposureStartDate"].ToString();
string stabilizationEndDate = data["stabilizationEndDate"].ToString();
//int storeId = int.Parse(posArray[0]); //int storeId = int.Parse(posArray[0]);
//根据发送的posId获取位置列表 //根据发送的posId获取位置列表
ACStorePosition position = CSVPositionReader<ACStorePosition>.GetPositon(posId); ACStorePosition position = CSVPositionReader<ACStorePosition>.GetPositon(posId);
...@@ -488,8 +491,11 @@ namespace DeviceLibrary ...@@ -488,8 +491,11 @@ namespace DeviceLibrary
JobInfo inStoreJob = new JobInfo(message, posId); JobInfo inStoreJob = new JobInfo(message, posId);
RobotManage.mainMachine.LabelingMoveInfo.MoveParam.PosID = inStoreJob.PosId; RobotManage.mainMachine.LabelingMoveInfo.MoveParam.PosID = inStoreJob.PosId;
RobotManage.mainMachine.LabelingMoveInfo.MoveParam.usedCount = usedCount; RobotManage.mainMachine.LabelingMoveInfo.MoveParam.usedCount = usedCount;
RobotManage.mainMachine.LabelingMoveInfo.MoveParam.Time1 = exposureStartDate;
RobotManage.mainMachine.LabelingMoveInfo.MoveParam.Time2 = stabilizationEndDate;
RobotManage.mainMachine.LabelingMoveInfo.MoveParam.Time3 = expireDate;
//如果当前正在出入库中，需要记录下来，等待空闲时执行 //如果当前正在出入库中，需要记录下来，等待空闲时执行
LogUtil.info(StoreName + " 收到服务器入库命令：库位号【" + posId + ",usedCount" + usedCount + "】二维码【" + message + "】 开始入库！"); LogUtil.info(StoreName + " 收到服务器入库命令：库位号【" + posId + ",usedCount" + usedCount + ",exposureStartDate="+ exposureStartDate + ",stabilizationEndDate="+ stabilizationEndDate + ",expireDate"+ expireDate + "】二维码【" + message + "】 开始入库！");
} }
else else
......
DeviceLibrary/theMachine/BoxTransport.cs
...@@ -263,7 +263,7 @@ namespace DeviceLibrary ...@@ -263,7 +263,7 @@ namespace DeviceLibrary
{ {
Msg.add(crc.GetString("Res0064", "放料时发现库位已经有料,请检查."), MsgLevel.alarm); Msg.add(crc.GetString("Res0064", "放料时发现库位已经有料,请检查."), MsgLevel.alarm);
MoveInfo.log($"放料时发现库位已经有料,请检查."); MoveInfo.log($"放料时发现库位已经有料,请检查.");
//RobotManage.UserPause(crc.GetString("Res0065", "放料时发现库位已经有料,请检查")); //RobotManage.UserPause(crc.GetString("Res0064", "放料时发现库位已经有料,请检查"));
} }
else else
{ {
......
DeviceLibrary/theMachine/JobList.cs
...@@ -49,6 +49,12 @@ namespace DeviceLibrary ...@@ -49,6 +49,12 @@ namespace DeviceLibrary
public void ClearLastPosid() { public void ClearLastPosid() {
lastoutpos = ""; lastoutpos = "";
} }
public void ClearAll()
{
LogUtil.info($"清除所有缓存出库任务");
lastoutpos = "";
jobInfos = new ConcurrentQueue<JobInfo>();
}
} }
public class JobInfo public class JobInfo
......
DeviceLibrary/theMachine/MainMachine.cs
...@@ -174,6 +174,9 @@ namespace DeviceLibrary ...@@ -174,6 +174,9 @@ namespace DeviceLibrary
private (bool, string) Y_Axis_interference(int from, int to) private (bool, string) Y_Axis_interference(int from, int to)
{ {
if (!IsAllDoorClosed())
return (true, "Safe door was not closed, and this axis cannot be moved");
if (Z_Axis.IsInPosition(Config.Z_Axis_P1)) { if (Z_Axis.IsInPosition(Config.Z_Axis_P1)) {
return (false, ""); return (false, "");
} }
...@@ -183,6 +186,9 @@ namespace DeviceLibrary ...@@ -183,6 +186,9 @@ namespace DeviceLibrary
private (bool, string) X_Axis_interference(int from, int to) private (bool, string) X_Axis_interference(int from, int to)
{ {
if (!IsAllDoorClosed())
return (true, "Safe door was not closed, and this axis cannot be moved");
if (Z_Axis.IsInPosition(Config.Z_Axis_P1)) if (Z_Axis.IsInPosition(Config.Z_Axis_P1))
{ {
return (false, ""); return (false, "");
...@@ -193,6 +199,10 @@ namespace DeviceLibrary ...@@ -193,6 +199,10 @@ namespace DeviceLibrary
private (bool, string) Z_Axis_interference(int arg1, int arg2) private (bool, string) Z_Axis_interference(int arg1, int arg2)
{ {
if(!IsAllDoorClosed())
return (true, "Safe door was not closed, and this axis cannot be moved");
if (X_Axis.IsBusy) if (X_Axis.IsBusy)
return (true, "The other axes are moving, and this axis cannot be moved"); return (true, "The other axes are moving, and this axis cannot be moved");
if (Y_Axis.IsBusy) if (Y_Axis.IsBusy)
...@@ -200,6 +210,22 @@ namespace DeviceLibrary ...@@ -200,6 +210,22 @@ namespace DeviceLibrary
return (false, ""); return (false, "");
} }
public bool IsAllDoorClosed() {
if (IOValue(IO_Type.PrinterDoor_Check).Equals(IO_VALUE.LOW))
{
return false;
}
if (IOValue(IO_Type.LeftDoor_Check).Equals(IO_VALUE.HIGH))
{
return false;
}
if (IOValue(IO_Type.RightDoor_Check).Equals(IO_VALUE.HIGH))
{
return false;
}
return true;
}
private void Crc_LanguageChangeEvent(object sender, EventArgs e) private void Crc_LanguageChangeEvent(object sender, EventArgs e)
{ {
StoreMoveInfo.Name = crc.GetString("Res0088","进出库调度"); StoreMoveInfo.Name = crc.GetString("Res0088","进出库调度");
...@@ -234,12 +260,15 @@ namespace DeviceLibrary ...@@ -234,12 +260,15 @@ namespace DeviceLibrary
if (runStatus == RunStatus.Running) if (runStatus == RunStatus.Running)
{ {
boxTransport.Process(); boxTransport.Process();
if (!LabelingTestMode)
{
if (RobotManage.InoutDebugMode) if (RobotManage.InoutDebugMode)
AutoInOutTestProcess(); AutoInOutTestProcess();
else if (selfAuditMode) else if (selfAuditMode)
TFIDSelfTestProcess(); TFIDSelfTestProcess();
else else
StoreDemoProcess(); StoreDemoProcess();
}
LabelingProcess(); LabelingProcess();
} }
...@@ -316,6 +345,7 @@ namespace DeviceLibrary ...@@ -316,6 +345,7 @@ namespace DeviceLibrary
Alarm(AlarmType.None); Alarm(AlarmType.None);
StopMove(true); StopMove(true);
LedProcess(null); LedProcess(null);
OutStoreJobList.ClearAll();
Msg.add("","", MsgLevel.info, ErrInfo.X09_Clear); Msg.add("","", MsgLevel.info, ErrInfo.X09_Clear);
} }
...@@ -359,7 +389,7 @@ namespace DeviceLibrary ...@@ -359,7 +389,7 @@ namespace DeviceLibrary
ResetMoveInfo.log("锁定抽屉"); ResetMoveInfo.log("锁定抽屉");
IOMove(IO_Type.Entry_Drawer_Lock, IO_VALUE.HIGH); IOMove(IO_Type.Entry_Drawer_Lock, IO_VALUE.HIGH);
IOMove(IO_Type.Out_Drawer_Lock, IO_VALUE.HIGH); IOMove(IO_Type.Out_Drawer_Lock, IO_VALUE.HIGH);
IOMove(IO_Type.Label_PasteBlow, IO_VALUE.LOW); //IOMove(IO_Type.Label_PasteBlow, IO_VALUE.LOW);
CylinderMove(ResetMoveInfo, IO_Type.Tin_Dock_Rotate_Release, IO_Type.Tin_Dock_Rotate_Clamp, IO_VALUE.LOW); CylinderMove(ResetMoveInfo, IO_Type.Tin_Dock_Rotate_Release, IO_Type.Tin_Dock_Rotate_Clamp, IO_VALUE.LOW);
Msg.add("","", MsgLevel.info, ErrInfo.X09_Clear); Msg.add("","", MsgLevel.info, ErrInfo.X09_Clear);
break; break;
...@@ -489,7 +519,10 @@ namespace DeviceLibrary ...@@ -489,7 +519,10 @@ namespace DeviceLibrary
{ {
Msg.add(crc.GetString("Res0172.8f1fa034","自检测到有错误物料,请处理"), MsgLevel.alarm); Msg.add(crc.GetString("Res0172.8f1fa034","自检测到有错误物料,请处理"), MsgLevel.alarm);
} }
if (LabelingTestMode) {
Msg.add("Labelling test mode", MsgLevel.warning);
}
if (!lastSafeCheckStatus && ok) if (!lastSafeCheckStatus && ok)
{ {
......
DeviceLibrary/theMachine/MainMachine_Labeling.cs
...@@ -17,6 +17,10 @@ namespace DeviceLibrary ...@@ -17,6 +17,10 @@ namespace DeviceLibrary
Task<(bool, string)> PrintTask = null; Task<(bool, string)> PrintTask = null;
int ScanTimes = 0; int ScanTimes = 0;
List<CodeInfo> CodeList; List<CodeInfo> CodeList;
public bool LabelingTestMode=false;
DateTime lastLabelDockMoveTime = DateTime.MinValue;
void LabelingProcess() void LabelingProcess()
{ {
if (CheckWait(LabelingMoveInfo)) if (CheckWait(LabelingMoveInfo))
...@@ -31,6 +35,11 @@ namespace DeviceLibrary ...@@ -31,6 +35,11 @@ namespace DeviceLibrary
FlipEquip.LiftDown(LabelingMoveInfo); FlipEquip.LiftDown(LabelingMoveInfo);
LabelingMoveInfo.log("进入扫码贴标机构"); LabelingMoveInfo.log("进入扫码贴标机构");
CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Down, IO_Type.Label_Dock_Up, IO_VALUE.LOW); CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Down, IO_Type.Label_Dock_Up, IO_VALUE.LOW);
if ((DateTime.Now - lastLabelDockMoveTime).TotalMinutes > 30) {
CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Back, IO_Type.Label_Dock_Front, IO_VALUE.LOW);
lastLabelDockMoveTime = DateTime.Now;
LabelingMoveInfo.log("接标台超过30分钟没有移动, 往复运动一次");
}
break; break;
case MoveStep.Labeling02: case MoveStep.Labeling02:
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling03); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling03);
...@@ -86,16 +95,27 @@ namespace DeviceLibrary ...@@ -86,16 +95,27 @@ namespace DeviceLibrary
LabelingMoveInfo.MoveParam.PosID = ""; LabelingMoveInfo.MoveParam.PosID = "";
LabelingMoveInfo.log("code: "+LabelingMoveInfo.MoveParam.WareCode); LabelingMoveInfo.log("code: "+LabelingMoveInfo.MoveParam.WareCode);
ScanTimes = 0; ScanTimes = 0;
if (LabelingTestMode) {
LabelingMoveInfo.MoveParam.IsNg = false;
LabelingMoveInfo.MoveParam.PosID = "NA";
LabelingMoveInfo.MoveParam.usedCount = 0;
LabelingMoveInfo.MoveParam.Time1 = "Test labeling";
LabelingMoveInfo.MoveParam.Time2 = "Test labeling";
LabelingMoveInfo.MoveParam.Time3 = "Test labeling";
}
else
{
ServerCM.SendInStoreRequest(new string[] { LabelingMoveInfo.MoveParam.WareCode }, LabelingMoveInfo.MoveParam, true); ServerCM.SendInStoreRequest(new string[] { LabelingMoveInfo.MoveParam.WareCode }, LabelingMoveInfo.MoveParam, true);
if (string.IsNullOrEmpty(LabelingMoveInfo.MoveParam.PosID)) if (string.IsNullOrEmpty(LabelingMoveInfo.MoveParam.PosID))
{ {
if (!LabelingMoveInfo.MoveParam.IsNg) if (!LabelingMoveInfo.MoveParam.IsNg)
LabelingMoveInfo.MoveParam.NgMsg = crc.GetString("Res0177.eb52c0df","服务器异常"); LabelingMoveInfo.MoveParam.NgMsg = crc.GetString("Res0177.eb52c0df", "服务器异常");
LabelingMoveInfo.MoveParam.IsNg = true; LabelingMoveInfo.MoveParam.IsNg = true;
} }
Setting_Init.Runtime_Posid = LabelingMoveInfo.MoveParam.PosID; Setting_Init.Runtime_Posid = LabelingMoveInfo.MoveParam.PosID;
Setting_Init.Runtime_RFID = LabelingMoveInfo.MoveParam.RFID; Setting_Init.Runtime_RFID = LabelingMoveInfo.MoveParam.RFID;
}
if (LabelingMoveInfo.MoveParam.IsNg) { if (LabelingMoveInfo.MoveParam.IsNg) {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling08); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling08);
LabelingMoveInfo.log($"获取库位失败,送到NG口:{LabelingMoveInfo.MoveParam.NgMsg}"); LabelingMoveInfo.log($"获取库位失败,送到NG口:{LabelingMoveInfo.MoveParam.NgMsg}");
...@@ -157,7 +177,6 @@ namespace DeviceLibrary ...@@ -157,7 +177,6 @@ namespace DeviceLibrary
if (RotateEquip.TurnWork.IsCompleted) if (RotateEquip.TurnWork.IsCompleted)
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling06); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling06);
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling08); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling08);
LabelingMoveInfo.log("旋转固定贴标位置"); LabelingMoveInfo.log("旋转固定贴标位置");
...@@ -248,24 +267,29 @@ namespace DeviceLibrary ...@@ -248,24 +267,29 @@ namespace DeviceLibrary
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling14); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling14);
CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Down, IO_Type.Label_Dock_Up, IO_VALUE.HIGH); CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Down, IO_Type.Label_Dock_Up, IO_VALUE.HIGH);
//LabelingMoveInfo.log("接标台上升"); LabelingMoveInfo.log("接标台上升");
} }
else { else {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling56);
Msg.add(crc.GetString("Res0173.8a024375","没有检测到打印出的标签"), MsgLevel.alarm, ErrInfo.LabelInPaste); Msg.add(crc.GetString("Res0173.8a024375","没有检测到打印出的标签"), MsgLevel.alarm, ErrInfo.LabelInPaste);
LabelingMoveInfo.MoveParam.IsNg = true; LabelingMoveInfo.NextMoveStep(MoveStep.Labeling10);
Setting_Init.Runtime_Posid = "NG"; CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Down, IO_Type.Label_Dock_Up, IO_VALUE.LOW);
LabelingMoveInfo.MoveParam.NgMsg = crc.GetString("Res0173.8a024375","没有检测到打印出的标签"); CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Back, IO_Type.Label_Dock_Front, IO_VALUE.HIGH);
CylinderMove(LabelingMoveInfo, IO_Type.Labeling_Left, IO_Type.Labeling_Right, IO_VALUE.HIGH);
//LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(3000));
//LabelingMoveInfo.MoveParam.IsNg = true;
//Setting_Init.Runtime_Posid = "NG";
//LabelingMoveInfo.MoveParam.NgMsg = crc.GetString("Res0173.8a024375","没有检测到打印出的标签");
RobotManage.UserPause(crc.GetString("Res0173.8a024375","没有检测到打印出的标签")); RobotManage.UserPause(crc.GetString("Res0173.8a024375","没有检测到打印出的标签"));
} }
break; break;
case MoveStep.Labeling14: case MoveStep.Labeling14:
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling15); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling15);
IOMove(IO_Type.Label_Vacuum, IO_VALUE.HIGH); IOMove(IO_Type.Label_Vacuum, IO_VALUE.HIGH);
CylinderMove(null, IO_Type.Labeling_Down, IO_Type.Labeling_Up, IO_VALUE.LOW); IOMove(IO_Type.Label_PasteBlow, IO_VALUE.HIGH);
Setting_Init.Runtime_Step = Runtime_StepE.LabelGot; CylinderMove(LabelingMoveInfo, IO_Type.Labeling_Down, IO_Type.Labeling_Up, IO_VALUE.LOW);
//LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000)); //LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000));
//LabelingMoveInfo.log("吸标下降"); LabelingMoveInfo.log("吸标下降");
break; break;
case MoveStep.Labeling15: case MoveStep.Labeling15:
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling16); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling16);
...@@ -273,9 +297,9 @@ namespace DeviceLibrary ...@@ -273,9 +297,9 @@ namespace DeviceLibrary
break; break;
case MoveStep.Labeling16: case MoveStep.Labeling16:
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling50); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling50);
CylinderMove(null, IO_Type.Labeling_Down, IO_Type.Labeling_Up, IO_VALUE.HIGH); CylinderMove(LabelingMoveInfo, IO_Type.Labeling_Down, IO_Type.Labeling_Up, IO_VALUE.HIGH);
//LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000)); //LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000));
//LabelingMoveInfo.log("吸标上升"); LabelingMoveInfo.log("吸标上升");
break; break;
case MoveStep.Labeling50: case MoveStep.Labeling50:
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling51); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling51);
...@@ -285,39 +309,45 @@ namespace DeviceLibrary ...@@ -285,39 +309,45 @@ namespace DeviceLibrary
case MoveStep.Labeling51: case MoveStep.Labeling51:
if (!CameraPointTest.TestHasLabelOnDock(false)) if (!CameraPointTest.TestHasLabelOnDock(false))
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling56); //LabelingMoveInfo.NextMoveStep(MoveStep.Labeling56);
Msg.add(crc.GetString("Res0167.8453b300","取标失败"), MsgLevel.alarm, ErrInfo.LabelInPaste); Msg.add(crc.GetString("Res0167.8453b300","取标失败"), MsgLevel.alarm, ErrInfo.LabelInPaste);
LabelingMoveInfo.MoveParam.IsNg = true; LabelingMoveInfo.NextMoveStep(MoveStep.Labeling10);
Setting_Init.Runtime_Posid = "NG"; CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Down, IO_Type.Label_Dock_Up, IO_VALUE.LOW);
LabelingMoveInfo.MoveParam.NgMsg = crc.GetString("Res0167.8453b300","取标失败"); CylinderMove(LabelingMoveInfo, IO_Type.Label_Dock_Back, IO_Type.Label_Dock_Front, IO_VALUE.HIGH);
IOMove(IO_Type.Label_Vacuum, IO_VALUE.LOW); CylinderMove(LabelingMoveInfo, IO_Type.Labeling_Left, IO_Type.Labeling_Right, IO_VALUE.HIGH);
//LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(3000));
//LabelingMoveInfo.MoveParam.IsNg = true;
//Setting_Init.Runtime_Posid = "NG";
//LabelingMoveInfo.MoveParam.NgMsg = crc.GetString("Res0167.8453b300","取标失败");
//IOMove(IO_Type.Label_Vacuum, IO_VALUE.LOW);
RobotManage.UserPause(crc.GetString("Res0167.8453b300","取标失败")); RobotManage.UserPause(crc.GetString("Res0167.8453b300","取标失败"));
return; return;
} }
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling52); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling52);
CylinderMove(null, IO_Type.Labeling_Down, IO_Type.Labeling_Up, IO_VALUE.LOW); CylinderMove(null, IO_Type.Labeling_Down, IO_Type.Labeling_Up, IO_VALUE.LOW);
IOMove(IO_Type.Label_PasteBlow, IO_VALUE.HIGH); //IOMove(IO_Type.Label_PasteBlow, IO_VALUE.HIGH);
//LabelingMoveInfo.log("贴标下降"); //Setting_Init.Runtime_Step = Runtime_StepE.LabelGot;
Setting_Init.Runtime_Step = Runtime_StepE.LabelPaste; Setting_Init.Runtime_Step = Runtime_StepE.LabelPaste;
//LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000)); //LabelingMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000));
break; break;
case MoveStep.Labeling52: case MoveStep.Labeling52:
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling52_2); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling52_2);
IOMove(IO_Type.Label_Vacuum, IO_VALUE.LOW); IOMove(IO_Type.Label_Vacuum, IO_VALUE.LOW);
RotateEquip.TurnDegree(30); IOMove(IO_Type.Label_PasteBlow, IO_VALUE.LOW);
RotateEquip.TurnDegree(30,0.4);
break; break;
case MoveStep.Labeling52_2: case MoveStep.Labeling52_2:
if (RotateEquip.TurnWork.IsCompleted) if (RotateEquip.TurnWork.IsCompleted)
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling53); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling53);
RotateEquip.TurnDouble(); RotateEquip.TurnDouble(0.4);
} }
break; break;
case MoveStep.Labeling53: case MoveStep.Labeling53:
if (RotateEquip.TurnWork.IsCompleted) if (RotateEquip.TurnWork.IsCompleted)
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling54); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling54);
IOMove(IO_Type.Label_PasteBlow, IO_VALUE.LOW); //IOMove(IO_Type.Label_PasteBlow, IO_VALUE.LOW);
RotateEquip.TurnDegree(-45); RotateEquip.TurnDegree(-45);
//RotateEquip.TurnDouble(); //RotateEquip.TurnDouble();
} }
...@@ -335,8 +365,8 @@ namespace DeviceLibrary ...@@ -335,8 +365,8 @@ namespace DeviceLibrary
if (RotateEquip.TurnWork.IsCompleted) if (RotateEquip.TurnWork.IsCompleted)
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling56); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling56);
//RotateEquip.TurnDegree(90); RotateEquip.TurnDegree(90,0.5);
RotateEquip.TurnDouble(); //RotateEquip.TurnDouble();
//RotateEquip.TurnDouble(); //RotateEquip.TurnDouble();
} }
break; break;
...@@ -344,10 +374,13 @@ namespace DeviceLibrary ...@@ -344,10 +374,13 @@ namespace DeviceLibrary
if (RotateEquip.TurnWork.IsCompleted) if (RotateEquip.TurnWork.IsCompleted)
{ {
LabelingMoveInfo.NextMoveStep(MoveStep.Labeling57); LabelingMoveInfo.NextMoveStep(MoveStep.Labeling57);
if (LabelingTestMode)
Setting_Init.Runtime_Step = Runtime_StepE.None;
else
Setting_Init.Runtime_Step = Runtime_StepE.LabelPasteFinish; Setting_Init.Runtime_Step = Runtime_StepE.LabelPasteFinish;
LabelingMoveInfo.log("贴标完成"); LabelingMoveInfo.log("贴标完成");
RotateEquip.TurnToEnd(false); RotateEquip.TurnToEnd(false);
IOMove(IO_Type.Label_PasteBlow, IO_VALUE.LOW); //IOMove(IO_Type.Label_PasteBlow, IO_VALUE.LOW);
if (LabelingMoveInfo.MoveParam.IsNg) if (LabelingMoveInfo.MoveParam.IsNg)
Setting_Init.Runtime_Posid = "NG"; Setting_Init.Runtime_Posid = "NG";
} }
...@@ -484,11 +517,21 @@ namespace DeviceLibrary ...@@ -484,11 +517,21 @@ namespace DeviceLibrary
else if (cc.CodeStr.StartsWith("S"))// if (Regex.IsMatch(cc.CodeStr, @"S[A-Za-z\-]*\d+")) //ri else if (cc.CodeStr.StartsWith("S"))// if (Regex.IsMatch(cc.CodeStr, @"S[A-Za-z\-]*\d+")) //ri
code[5] = cc.CodeStr; code[5] = cc.CodeStr;
} }
//if (!string.IsNullOrWhiteSpace(code[4]) && code[4].Length > 2)
//{
// if (DateTime.TryParse(code[4].Substring(2), out DateTime dateTime))
// {
// if (DateTime.Now < dateTime)
// {
// //code[4] = "2D" + reelParam.Time3;
// }
// }
//}
reelParam.Time1 = DateTime.Now.ToString("MM-dd-yyyy HH:mm:ss"); //reelParam.Time1 = DateTime.Now.ToString("MM-dd-yyyy HH:mm:ss");
reelParam.Time2 = DateTime.Now.AddHours(4).ToString("MM-dd-yyyy HH:mm:ss"); //reelParam.Time2 = DateTime.Now.AddHours(4).ToString("MM-dd-yyyy HH:mm:ss");
reelParam.Time3 = DateTime.Now.AddHours(5 * 24 + 4).ToString("MM-dd-yyyy HH:mm:ss"); //reelParam.Time3 = DateTime.Now.AddHours(5 * 24 + 4).ToString("MM-dd-yyyy HH:mm:ss");
code[4] = "2D" + reelParam.Time3;
if (string.IsNullOrEmpty(rightcode)) if (string.IsNullOrEmpty(rightcode))
{ {
if (string.IsNullOrEmpty(code[0])) if (string.IsNullOrEmpty(code[0]))
......
DeviceLibrary/theMachine/MainMachine_RFIDSelftest.cs
...@@ -87,11 +87,6 @@ namespace DeviceLibrary ...@@ -87,11 +87,6 @@ namespace DeviceLibrary
RobotManage.mainMachine.TPMove.ToHigh(StoreMoveInfo); RobotManage.mainMachine.TPMove.ToHigh(StoreMoveInfo);
StoreMoveInfo.log($"{job.WareNum},上层库位移至右侧"); StoreMoveInfo.log($"{job.WareNum},上层库位移至右侧");
} }
} }
break; break;
case MoveStep.StoreIn03: case MoveStep.StoreIn03:
...@@ -142,9 +137,10 @@ namespace DeviceLibrary ...@@ -142,9 +137,10 @@ namespace DeviceLibrary
ds = Encoding.ASCII.GetString(data).Trim(); ds = Encoding.ASCII.GetString(data).Trim();
if (!string.IsNullOrEmpty(ds)) if (!string.IsNullOrEmpty(ds))
{ {
StoreMoveInfo.MoveParam.RFID = ds;
StoreMoveInfo.log("读取到 RFID:" + ds + " , " + RobotManage.RFID.HexBuff(data)); StoreMoveInfo.log("读取到 RFID:" + ds + " , " + RobotManage.RFID.HexBuff(data));
if (StoreMoveInfo.MoveParam.WareCode.IndexOf(ds) > -1) StoreMoveInfo.MoveParam.RFID = ds.TrimStart('S');
if (StoreMoveInfo.MoveParam.WareCode.IndexOf(StoreMoveInfo.MoveParam.RFID) > -1)
{ {
issame = true; issame = true;
break; break;
...@@ -160,9 +156,9 @@ namespace DeviceLibrary ...@@ -160,9 +156,9 @@ namespace DeviceLibrary
ds = Encoding.ASCII.GetString(data).Trim(); ds = Encoding.ASCII.GetString(data).Trim();
if (!string.IsNullOrEmpty(ds)) if (!string.IsNullOrEmpty(ds))
{ {
StoreMoveInfo.MoveParam.RFID = ds; StoreMoveInfo.MoveParam.RFID = ds.TrimStart('S');
StoreMoveInfo.log("读取到 RFID2:" + ds + " , " + RobotManage.RFID.HexBuff(data)); StoreMoveInfo.log("读取到 RFID2:" + ds + " , " + RobotManage.RFID.HexBuff(data));
if (StoreMoveInfo.MoveParam.WareCode.IndexOf(ds) > -1) if (StoreMoveInfo.MoveParam.WareCode.IndexOf(StoreMoveInfo.MoveParam.RFID) > -1)
{ {
issame = true; issame = true;
break; break;
...@@ -184,6 +180,7 @@ namespace DeviceLibrary ...@@ -184,6 +180,7 @@ namespace DeviceLibrary
case MoveStep.StoreOut13: case MoveStep.StoreOut13:
if (boxTransport.IsComplateOrFree) if (boxTransport.IsComplateOrFree)
{ {
Setting_Init.Runtime_Step = Runtime_StepE.None;
StoreMoveInfo.NextMoveStep(MoveStep.StoreIn01); StoreMoveInfo.NextMoveStep(MoveStep.StoreIn01);
if (!issame) if (!issame)
{ {
......
DeviceLibrary/theMachine/MainMachine_Store.cs
...@@ -48,23 +48,34 @@ namespace DeviceLibrary ...@@ -48,23 +48,34 @@ namespace DeviceLibrary
case MoveStep.Wait: case MoveStep.Wait:
StoreMoveInfo.MoveParam.ReelOnFixture = false; StoreMoveInfo.MoveParam.ReelOnFixture = false;
if (IOValue(IO_Type.Taking_Clamp).Equals(IO_VALUE.LOW)) { if (IOValue(IO_Type.Taking_Clamp).Equals(IO_VALUE.LOW)) {
if (false && Setting_Init.Runtime_Step == Runtime_StepE.LabelProcess) if (Setting_Init.Runtime_Step >= Runtime_StepE.LabelProcess && Setting_Init.Runtime_Step <= Runtime_StepE.LabelPasteFinish)
{ {
StoreMoveInfo.log("检测到上次正在贴标:" + Setting_Init.Runtime_Step + "," + Setting_Init.Runtime_Posid + "," + Setting_Init.Runtime_FromPosid); StoreMoveInfo.log("检测到上次正在贴标:" + Setting_Init.Runtime_Step + "," + Setting_Init.Runtime_Posid + "," + Setting_Init.Runtime_FromPosid);
if (!string.IsNullOrEmpty(Setting_Init.Runtime_FromPosid))
{ //if (Setting_Init.Runtime_Step >= Runtime_StepE.Printed && Setting_Init.Runtime_Step < Runtime_StepE.LabelPasteFinish)
LabelingMoveInfo.NewMove(MoveStep.Labeling01); //{
// StoreMoveInfo.log("检测到上次正在贴标:" + Setting_Init.Runtime_Step + "," + Setting_Init.Runtime_Posid + "," + Setting_Init.Runtime_FromPosid);
// Msg.add(crc.GetString("Res0133", "重置前物料正在贴标,无法继续,请手动处理"), MsgLevel.warning, ErrInfo.LabelInPaste);
// RobotManage.UserPause(crc.GetString("Res0133", "重置前物料正在贴标,无法继续,请手动处理"));
// return;
//}
LabelingMoveInfo.MoveParam.IsNg = true;
LabelingMoveInfo.MoveParam.NgMsg = "重置前物料正在贴标,NG处理";
StoreMoveInfo.NextMoveStep(MoveStep.StoreIn03); StoreMoveInfo.NextMoveStep(MoveStep.StoreIn03);
} //if (!string.IsNullOrEmpty(Setting_Init.Runtime_FromPosid))
else //{
{ // LabelingMoveInfo.NewMove(MoveStep.Labeling01);
Msg.add(crc.GetString("Res0133", "重置前物料正在贴标,无法继续,请手动处理"), MsgLevel.warning, ErrInfo.LabelInPaste); // StoreMoveInfo.NextMoveStep(MoveStep.StoreIn03);
RobotManage.UserPause(crc.GetString("Res0133", "重置前物料正在贴标,无法继续,请手动处理")); //}
} //else
//{
// Msg.add(crc.GetString("Res0133", "重置前物料正在贴标,无法继续,请手动处理"), MsgLevel.warning, ErrInfo.LabelInPaste);
// RobotManage.UserPause(crc.GetString("Res0133", "重置前物料正在贴标,无法继续,请手动处理"));
//}
return; return;
} }
else if (Setting_Init.Runtime_Step >= Runtime_StepE.LabelProcess && Setting_Init.Runtime_Step <= Runtime_StepE.LabelPasteFinish) else if (Setting_Init.Runtime_Step >= Runtime_StepE.LabelPasteFinish)
{ {
StoreMoveInfo.log("检测到上次已完成贴标:" + Setting_Init.Runtime_Step + "," + Setting_Init.Runtime_Posid + "," + Setting_Init.Runtime_RFID); StoreMoveInfo.log("检测到上次已完成贴标:" + Setting_Init.Runtime_Step + "," + Setting_Init.Runtime_Posid + "," + Setting_Init.Runtime_RFID);
StoreMoveInfo.NewMove(MoveStep.StoreIn03); StoreMoveInfo.NewMove(MoveStep.StoreIn03);
...@@ -76,13 +87,6 @@ namespace DeviceLibrary ...@@ -76,13 +87,6 @@ namespace DeviceLibrary
StoreMoveInfo.MoveParam.RFID = Setting_Init.Runtime_RFID; StoreMoveInfo.MoveParam.RFID = Setting_Init.Runtime_RFID;
return; return;
} }
else if (Setting_Init.Runtime_Step >= Runtime_StepE.Printed && Setting_Init.Runtime_Step < Runtime_StepE.LabelPasteFinish)
{
StoreMoveInfo.log("检测到上次正在贴标:" + Setting_Init.Runtime_Step + "," + Setting_Init.Runtime_Posid+","+ Setting_Init.Runtime_FromPosid);
Msg.add(crc.GetString("Res0133","重置前物料正在贴标,无法继续,请手动处理"), MsgLevel.warning, ErrInfo.LabelInPaste);
RobotManage.UserPause(crc.GetString("Res0133","重置前物料正在贴标,无法继续,请手动处理"));
return;
}
else if (OutStoreJobList.Dequeue(out JobInfo jobInfo)) else if (OutStoreJobList.Dequeue(out JobInfo jobInfo))
{ {
...@@ -134,8 +138,6 @@ namespace DeviceLibrary ...@@ -134,8 +138,6 @@ namespace DeviceLibrary
StoreMoveInfo.MoveParam.PosID = Setting_Init.Runtime_Posid; StoreMoveInfo.MoveParam.PosID = Setting_Init.Runtime_Posid;
StoreMoveInfo.MoveParam.WareCode= Setting_Init.Runtime_WareCode; StoreMoveInfo.MoveParam.WareCode= Setting_Init.Runtime_WareCode;
} }
break; break;
case MoveStep.StoreIn01: case MoveStep.StoreIn01:
string inposid; string inposid;
...@@ -237,6 +239,7 @@ namespace DeviceLibrary ...@@ -237,6 +239,7 @@ namespace DeviceLibrary
case MoveStep.StoreIn05: case MoveStep.StoreIn05:
if (!boxTransport.IsComplateOrFree) if (!boxTransport.IsComplateOrFree)
break; break;
Setting_Init.Runtime_Step = Runtime_StepE.None;
if (StoreMoveInfo.MoveParam.usedCount == 0) if (StoreMoveInfo.MoveParam.usedCount == 0)
{ {
if (StoreMoveInfo.MoveParam.RFID.Length > 16) if (StoreMoveInfo.MoveParam.RFID.Length > 16)
...@@ -372,6 +375,7 @@ namespace DeviceLibrary ...@@ -372,6 +375,7 @@ namespace DeviceLibrary
case MoveStep.StoreIn09: case MoveStep.StoreIn09:
if (boxTransport.IsComplateOrFree) if (boxTransport.IsComplateOrFree)
{ {
Setting_Init.Runtime_Step = Runtime_StepE.None;
if (!StoreMoveInfo.MoveParam.IsNg) if (!StoreMoveInfo.MoveParam.IsNg)
{ {
if (!ServerCM.SendStoreState(StoreMoveInfo.MoveParam.PosID, StoreStatus.InStoreEnd)) if (!ServerCM.SendStoreState(StoreMoveInfo.MoveParam.PosID, StoreStatus.InStoreEnd))
...@@ -475,7 +479,7 @@ namespace DeviceLibrary ...@@ -475,7 +479,7 @@ namespace DeviceLibrary
case MoveStep.StoreOut11: case MoveStep.StoreOut11:
if (boxTransport.IsComplateOrFree) if (boxTransport.IsComplateOrFree)
{ {
ServerCM.SendStoreState(StoreMoveInfo.MoveParam.PosID, StoreStatus.OutStoreBoxEnd); //ServerCM.SendStoreState(StoreMoveInfo.MoveParam.PosID, StoreStatus.OutStoreBoxEnd);
bool issame = false; bool issame = false;
string ds = ""; string ds = "";
for (int i = 0; i < 15; i++) for (int i = 0; i < 15; i++)
...@@ -542,6 +546,7 @@ namespace DeviceLibrary ...@@ -542,6 +546,7 @@ namespace DeviceLibrary
case MoveStep.StoreOut12: case MoveStep.StoreOut12:
if (boxTransport.IsComplateOrFree) if (boxTransport.IsComplateOrFree)
{ {
Setting_Init.Runtime_Step = Runtime_StepE.None;
if (StoreMoveInfo.MoveParam.OutPosID != StoreMoveInfo.MoveParam.PosID) if (StoreMoveInfo.MoveParam.OutPosID != StoreMoveInfo.MoveParam.PosID)
{ {
ServerCM.SendStoreState(StoreMoveInfo.MoveParam.PosID, StoreStatus.OutStoreBoxEnd); ServerCM.SendStoreState(StoreMoveInfo.MoveParam.PosID, StoreStatus.OutStoreBoxEnd);
...@@ -575,6 +580,7 @@ namespace DeviceLibrary ...@@ -575,6 +580,7 @@ namespace DeviceLibrary
{ {
StoreMoveInfo.NextMoveStep(MoveStep.Wait); StoreMoveInfo.NextMoveStep(MoveStep.Wait);
StoreMoveInfo.log($"NG出库库位已完成"); StoreMoveInfo.log($"NG出库库位已完成");
return; return;
} }
} }
......
DeviceLibrary/theMachine/MoveStep.cs
...@@ -121,6 +121,7 @@ namespace DeviceLibrary ...@@ -121,6 +121,7 @@ namespace DeviceLibrary
Labeling08, Labeling08,
Labeling09, Labeling09,
WaitInStore, WaitInStore,
Labeling10_Reset,
Labeling10, Labeling10,
Labeling11, Labeling11,
Labeling12, Labeling12,
......
DeviceLibrary/userControl/AxisMoveControl.cs
...@@ -82,7 +82,11 @@ namespace DeviceLibrary ...@@ -82,7 +82,11 @@ namespace DeviceLibrary
MessageBox.Show(crc.GetString("Res0122","请先选择运动轴"), crc.GetString("Res0123","警告 "), MessageBoxButtons.OK, MessageBoxIcon.Error); MessageBox.Show(crc.GetString("Res0122","请先选择运动轴"), crc.GetString("Res0123","警告 "), MessageBoxButtons.OK, MessageBoxIcon.Error);
return false; return false;
} }
if (!currentAxis.IsSafe(0, out string msg))
{
MessageBox.Show(msg);
return false;
}
return true; return true;
} }
private void btnOpenAxis_Click(object sender, EventArgs e) private void btnOpenAxis_Click(object sender, EventArgs e)
......
TheMachine/Form1.cs
...@@ -166,6 +166,16 @@ namespace TheMachine ...@@ -166,6 +166,16 @@ namespace TheMachine
var loadtask = Task.Run(() => var loadtask = Task.Run(() =>
{ {
RobotManage.Init(); RobotManage.Init();
}).ContinueWith(delegate {
CylinderButton.IsSafe += () =>
{
if(RobotManage.isRunning)
return (false, "Device is in automatic");
if (!RobotManage.mainMachine.IsAllDoorClosed())
return (false, "Safe door was not closed");
return (true, "");
};
}); });
ListViewItem lvi = new ListViewItem(new string[] { "", DateTime.Now.ToString(), crc.GetString("Res0006","设备加载中,请稍后...") }); ListViewItem lvi = new ListViewItem(new string[] { "", DateTime.Now.ToString(), crc.GetString("Res0006","设备加载中,请稍后...") });
...@@ -431,7 +441,7 @@ namespace TheMachine ...@@ -431,7 +441,7 @@ namespace TheMachine
else if (msg.errInfo == ErrInfo.LabelInPaste) else if (msg.errInfo == ErrInfo.LabelInPaste)
{ {
RobotManage.mainMachine.IOMove(IO_Type.PrinterDoor_Lock, IO_VALUE.LOW); RobotManage.mainMachine.IOMove(IO_Type.PrinterDoor_Lock, IO_VALUE.LOW);
if (FrmAlarm.ShowAlarmDialog(crc.GetString("Res0143","贴标区内可能有物料未完成贴标,请手动取出")) == DialogResult.OK) if (FrmAlarm.ShowAlarmDialog("Labeling Exceptions:" + "\r\n"+ msg.msgtxt) == DialogResult.OK)
{ {
LogUtil.info("用户确认已处理"); LogUtil.info("用户确认已处理");
//Setting_Init.Runtime_Step = Runtime_StepE.None; //Setting_Init.Runtime_Step = Runtime_StepE.None;
...@@ -710,28 +720,39 @@ namespace TheMachine ...@@ -710,28 +720,39 @@ namespace TheMachine
private void button4_Click_1(object sender, EventArgs e) private void button4_Click_1(object sender, EventArgs e)
{ {
if (!SafeTest())
return;
IOManager.IOMove(IO_Type.Entry_Drawer_Lock,IO_VALUE.LOW); IOManager.IOMove(IO_Type.Entry_Drawer_Lock,IO_VALUE.LOW);
} }
private void button3_Click_1(object sender, EventArgs e) private void button3_Click_1(object sender, EventArgs e)
{ {
if (!SafeTest())
return;
IOManager.IOMove(IO_Type.Out_Drawer_Lock, IO_VALUE.LOW); IOManager.IOMove(IO_Type.Out_Drawer_Lock, IO_VALUE.LOW);
} }
private void button5_Click_1(object sender, EventArgs e) private void button5_Click_1(object sender, EventArgs e)
{ {
if (!SafeTest())
return;
IOManager.IOMove(IO_Type.LeftDoor_Lock, IO_VALUE.LOW); IOManager.IOMove(IO_Type.LeftDoor_Lock, IO_VALUE.LOW);
RobotManage.mainMachine.LeftDoorOpen = true; RobotManage.mainMachine.LeftDoorOpen = true;
} }
private void button2_Click_1(object sender, EventArgs e) private void button2_Click_1(object sender, EventArgs e)
{ {
if (!SafeTest())
return;
IOManager.IOMove(IO_Type.RightDoor_Lock, IO_VALUE.LOW); IOManager.IOMove(IO_Type.RightDoor_Lock, IO_VALUE.LOW);
RobotManage.mainMachine.RightDoorOpen = true; RobotManage.mainMachine.RightDoorOpen = true;
} }
private void button2_Click_2(object sender, EventArgs e) private void button2_Click_2(object sender, EventArgs e)
{ {
if (!SafeTest())
return;
IOManager.IOMove(IO_Type.PrinterDoor_Lock, IO_VALUE.LOW); IOManager.IOMove(IO_Type.PrinterDoor_Lock, IO_VALUE.LOW);
RobotManage.mainMachine.PrintDoorOpen = true; RobotManage.mainMachine.PrintDoorOpen = true;
} }
...@@ -743,7 +764,13 @@ namespace TheMachine ...@@ -743,7 +764,13 @@ namespace TheMachine
RobotManage.mainMachine.StoreMoveInfo.NextMoveStep(MoveStep.StoreIn01); RobotManage.mainMachine.StoreMoveInfo.NextMoveStep(MoveStep.StoreIn01);
else if (!cb_cycledemo.Checked) else if (!cb_cycledemo.Checked)
RobotManage.mainMachine.StoreMoveInfo.NextMoveStep(MoveStep.Wait); RobotManage.mainMachine.StoreMoveInfo.NextMoveStep(MoveStep.Wait);
}
bool SafeTest() {
if (RobotManage.mainMachine.StoreMoveInfo.MoveStep == MoveStep.Wait)
return true;
MessageBox.Show("The device is moving and cannot be unlocked");
return false;
} }
} }
} }
\ No newline at end of file \ No newline at end of file
TheMachine/IOControls.Designer.cs
...@@ -57,6 +57,7 @@ namespace TheMachine ...@@ -57,6 +57,7 @@ namespace TheMachine
this.cylinderButton13 = new TheMachine.CylinderButton(); this.cylinderButton13 = new TheMachine.CylinderButton();
this.cylinderButton11 = new TheMachine.CylinderButton(); this.cylinderButton11 = new TheMachine.CylinderButton();
this.ioControl1 = new TheMachine.IOControl(); this.ioControl1 = new TheMachine.IOControl();
this.cylinderButton9 = new TheMachine.CylinderButton();
this.panel1.SuspendLayout(); this.panel1.SuspendLayout();
this.SuspendLayout(); this.SuspendLayout();
// //
...@@ -64,7 +65,7 @@ namespace TheMachine ...@@ -64,7 +65,7 @@ namespace TheMachine
// //
this.btn_FlipEquip.BackColor = System.Drawing.Color.White; this.btn_FlipEquip.BackColor = System.Drawing.Color.White;
this.btn_FlipEquip.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.btn_FlipEquip.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.btn_FlipEquip.Location = new System.Drawing.Point(542, 474); this.btn_FlipEquip.Location = new System.Drawing.Point(542, 515);
this.btn_FlipEquip.Name = "btn_FlipEquip"; this.btn_FlipEquip.Name = "btn_FlipEquip";
this.btn_FlipEquip.Size = new System.Drawing.Size(191, 35); this.btn_FlipEquip.Size = new System.Drawing.Size(191, 35);
this.btn_FlipEquip.TabIndex = 2; this.btn_FlipEquip.TabIndex = 2;
...@@ -96,6 +97,7 @@ namespace TheMachine ...@@ -96,6 +97,7 @@ namespace TheMachine
this.panel1.Controls.Add(this.cylinderButton3); this.panel1.Controls.Add(this.cylinderButton3);
this.panel1.Controls.Add(this.cylinderButton14); this.panel1.Controls.Add(this.cylinderButton14);
this.panel1.Controls.Add(this.cylinderButton4); this.panel1.Controls.Add(this.cylinderButton4);
this.panel1.Controls.Add(this.cylinderButton9);
this.panel1.Controls.Add(this.cylinderButton16); this.panel1.Controls.Add(this.cylinderButton16);
this.panel1.Controls.Add(this.cylinderButton7); this.panel1.Controls.Add(this.cylinderButton7);
this.panel1.Controls.Add(this.cylinderButton15); this.panel1.Controls.Add(this.cylinderButton15);
...@@ -112,7 +114,7 @@ namespace TheMachine ...@@ -112,7 +114,7 @@ namespace TheMachine
// //
this.button10.BackColor = System.Drawing.Color.White; this.button10.BackColor = System.Drawing.Color.White;
this.button10.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button10.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button10.Location = new System.Drawing.Point(739, 679); this.button10.Location = new System.Drawing.Point(739, 720);
this.button10.Name = "button10"; this.button10.Name = "button10";
this.button10.Size = new System.Drawing.Size(191, 35); this.button10.Size = new System.Drawing.Size(191, 35);
this.button10.TabIndex = 6; this.button10.TabIndex = 6;
...@@ -124,7 +126,7 @@ namespace TheMachine ...@@ -124,7 +126,7 @@ namespace TheMachine
// //
this.button9.BackColor = System.Drawing.Color.White; this.button9.BackColor = System.Drawing.Color.White;
this.button9.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button9.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button9.Location = new System.Drawing.Point(542, 679); this.button9.Location = new System.Drawing.Point(542, 720);
this.button9.Name = "button9"; this.button9.Name = "button9";
this.button9.Size = new System.Drawing.Size(191, 35); this.button9.Size = new System.Drawing.Size(191, 35);
this.button9.TabIndex = 6; this.button9.TabIndex = 6;
...@@ -136,7 +138,7 @@ namespace TheMachine ...@@ -136,7 +138,7 @@ namespace TheMachine
// //
this.button8.BackColor = System.Drawing.Color.White; this.button8.BackColor = System.Drawing.Color.White;
this.button8.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button8.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button8.Location = new System.Drawing.Point(542, 638); this.button8.Location = new System.Drawing.Point(542, 679);
this.button8.Name = "button8"; this.button8.Name = "button8";
this.button8.Size = new System.Drawing.Size(191, 35); this.button8.Size = new System.Drawing.Size(191, 35);
this.button8.TabIndex = 5; this.button8.TabIndex = 5;
...@@ -148,7 +150,7 @@ namespace TheMachine ...@@ -148,7 +150,7 @@ namespace TheMachine
// //
this.button4.BackColor = System.Drawing.Color.White; this.button4.BackColor = System.Drawing.Color.White;
this.button4.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button4.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button4.Location = new System.Drawing.Point(739, 556); this.button4.Location = new System.Drawing.Point(739, 597);
this.button4.Name = "button4"; this.button4.Name = "button4";
this.button4.Size = new System.Drawing.Size(191, 35); this.button4.Size = new System.Drawing.Size(191, 35);
this.button4.TabIndex = 3; this.button4.TabIndex = 3;
...@@ -160,7 +162,7 @@ namespace TheMachine ...@@ -160,7 +162,7 @@ namespace TheMachine
// //
this.button7.BackColor = System.Drawing.Color.White; this.button7.BackColor = System.Drawing.Color.White;
this.button7.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button7.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button7.Location = new System.Drawing.Point(739, 597); this.button7.Location = new System.Drawing.Point(739, 638);
this.button7.Name = "button7"; this.button7.Name = "button7";
this.button7.Size = new System.Drawing.Size(191, 35); this.button7.Size = new System.Drawing.Size(191, 35);
this.button7.TabIndex = 4; this.button7.TabIndex = 4;
...@@ -172,7 +174,7 @@ namespace TheMachine ...@@ -172,7 +174,7 @@ namespace TheMachine
// //
this.button6.BackColor = System.Drawing.Color.White; this.button6.BackColor = System.Drawing.Color.White;
this.button6.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button6.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button6.Location = new System.Drawing.Point(542, 597); this.button6.Location = new System.Drawing.Point(542, 638);
this.button6.Name = "button6"; this.button6.Name = "button6";
this.button6.Size = new System.Drawing.Size(191, 35); this.button6.Size = new System.Drawing.Size(191, 35);
this.button6.TabIndex = 4; this.button6.TabIndex = 4;
...@@ -184,7 +186,7 @@ namespace TheMachine ...@@ -184,7 +186,7 @@ namespace TheMachine
// //
this.button5.BackColor = System.Drawing.Color.White; this.button5.BackColor = System.Drawing.Color.White;
this.button5.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button5.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button5.Location = new System.Drawing.Point(542, 556); this.button5.Location = new System.Drawing.Point(542, 597);
this.button5.Name = "button5"; this.button5.Name = "button5";
this.button5.Size = new System.Drawing.Size(191, 35); this.button5.Size = new System.Drawing.Size(191, 35);
this.button5.TabIndex = 4; this.button5.TabIndex = 4;
...@@ -196,7 +198,7 @@ namespace TheMachine ...@@ -196,7 +198,7 @@ namespace TheMachine
// //
this.button1.BackColor = System.Drawing.Color.White; this.button1.BackColor = System.Drawing.Color.White;
this.button1.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button1.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button1.Location = new System.Drawing.Point(739, 474); this.button1.Location = new System.Drawing.Point(739, 515);
this.button1.Name = "button1"; this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(191, 35); this.button1.Size = new System.Drawing.Size(191, 35);
this.button1.TabIndex = 2; this.button1.TabIndex = 2;
...@@ -208,7 +210,7 @@ namespace TheMachine ...@@ -208,7 +210,7 @@ namespace TheMachine
// //
this.button3.BackColor = System.Drawing.Color.White; this.button3.BackColor = System.Drawing.Color.White;
this.button3.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button3.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button3.Location = new System.Drawing.Point(739, 515); this.button3.Location = new System.Drawing.Point(739, 556);
this.button3.Name = "button3"; this.button3.Name = "button3";
this.button3.Size = new System.Drawing.Size(191, 35); this.button3.Size = new System.Drawing.Size(191, 35);
this.button3.TabIndex = 2; this.button3.TabIndex = 2;
...@@ -220,7 +222,7 @@ namespace TheMachine ...@@ -220,7 +222,7 @@ namespace TheMachine
// //
this.button2.BackColor = System.Drawing.Color.White; this.button2.BackColor = System.Drawing.Color.White;
this.button2.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.button2.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.button2.Location = new System.Drawing.Point(542, 515); this.button2.Location = new System.Drawing.Point(542, 556);
this.button2.Name = "button2"; this.button2.Name = "button2";
this.button2.Size = new System.Drawing.Size(191, 35); this.button2.Size = new System.Drawing.Size(191, 35);
this.button2.TabIndex = 2; this.button2.TabIndex = 2;
...@@ -374,7 +376,7 @@ namespace TheMachine ...@@ -374,7 +376,7 @@ namespace TheMachine
this.cylinderButton16.FlatStyle = System.Windows.Forms.FlatStyle.Flat; this.cylinderButton16.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.cylinderButton16.IO_HIGH = "Label_Vacuum"; this.cylinderButton16.IO_HIGH = "Label_Vacuum";
this.cylinderButton16.IO_LOW = ""; this.cylinderButton16.IO_LOW = "";
this.cylinderButton16.Location = new System.Drawing.Point(739, 433); this.cylinderButton16.Location = new System.Drawing.Point(542, 474);
this.cylinderButton16.Name = "cylinderButton16"; this.cylinderButton16.Name = "cylinderButton16";
this.cylinderButton16.Size = new System.Drawing.Size(191, 35); this.cylinderButton16.Size = new System.Drawing.Size(191, 35);
this.cylinderButton16.TabIndex = 1; this.cylinderButton16.TabIndex = 1;
...@@ -449,6 +451,20 @@ namespace TheMachine ...@@ -449,6 +451,20 @@ namespace TheMachine
this.ioControl1.Tag = "not"; this.ioControl1.Tag = "not";
this.ioControl1.Load += new System.EventHandler(this.ioControl1_Load); this.ioControl1.Load += new System.EventHandler(this.ioControl1_Load);
// //
// cylinderButton9
//
this.cylinderButton9.BackColor = System.Drawing.Color.White;
this.cylinderButton9.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
this.cylinderButton9.IO_HIGH = "Label_PasteBlow";
this.cylinderButton9.IO_LOW = "";
this.cylinderButton9.Location = new System.Drawing.Point(739, 474);
this.cylinderButton9.Name = "cylinderButton9";
this.cylinderButton9.Size = new System.Drawing.Size(191, 35);
this.cylinderButton9.TabIndex = 1;
this.cylinderButton9.Tag = "not";
this.cylinderButton9.Text = "Label_PasteBlow";
this.cylinderButton9.UseVisualStyleBackColor = false;
//
// IOControls // IOControls
// //
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.None; this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.None;
...@@ -491,5 +507,6 @@ namespace TheMachine ...@@ -491,5 +507,6 @@ namespace TheMachine
private System.Windows.Forms.Button button8; private System.Windows.Forms.Button button8;
private System.Windows.Forms.Button button9; private System.Windows.Forms.Button button9;
private System.Windows.Forms.Button button10; private System.Windows.Forms.Button button10;
private CylinderButton cylinderButton9;
} }
} }
TheMachine/IOControls.cs
...@@ -39,53 +39,118 @@ namespace TheMachine ...@@ -39,53 +39,118 @@ namespace TheMachine
private void btn_FlipEquip_Click(object sender, EventArgs e) private void btn_FlipEquip_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.FlipEquip.LiftUp(null); RobotManage.mainMachine.FlipEquip.LiftUp(null);
LogUtil.info("手动点击:FlipEquip.LiftUp"); LogUtil.info("手动点击:FlipEquip.LiftUp");
} }
private void button1_Click(object sender, EventArgs e) private void button1_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.FlipEquip.LiftDown(null); RobotManage.mainMachine.FlipEquip.LiftDown(null);
LogUtil.info("手动点击:FlipEquip.LiftDown"); LogUtil.info("手动点击:FlipEquip.LiftDown");
} }
private void button2_Click(object sender, EventArgs e) private void button2_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.RotateEquip.TurnToEnd(true); RobotManage.mainMachine.RotateEquip.TurnToEnd(true);
LogUtil.info("手动点击:RotateEquip.TurnToEnd 水平"); LogUtil.info("手动点击:RotateEquip.TurnToEnd 水平");
} }
private void button3_Click(object sender, EventArgs e) private void button3_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.RotateEquip.TurnToEnd(false); RobotManage.mainMachine.RotateEquip.TurnToEnd(false);
LogUtil.info("手动点击:RotateEquip.TurnToEnd 垂直"); LogUtil.info("手动点击:RotateEquip.TurnToEnd 垂直");
} }
private void button5_Click(object sender, EventArgs e) private void button5_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.TPMove.ToLow(null); RobotManage.mainMachine.TPMove.ToLow(null);
} }
private void button4_Click(object sender, EventArgs e) private void button4_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.TPMove.ToHigh(null); RobotManage.mainMachine.TPMove.ToHigh(null);
} }
private void button6_Click(object sender, EventArgs e) private void button6_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.RotateEquip.TurnDegree(45); RobotManage.mainMachine.RotateEquip.TurnDegree(45);
} }
private void button7_Click(object sender, EventArgs e) private void button7_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.RotateEquip.TurnDegree(-45); RobotManage.mainMachine.RotateEquip.TurnDegree(-45);
} }
private void button8_Click(object sender, EventArgs e) private void button8_Click(object sender, EventArgs e)
{ {
var result = IsSafe();
if (!result.Item1)
{
MessageBox.Show(result.Item2);
return;
}
RobotManage.mainMachine.RotateEquip.TurnRound(); RobotManage.mainMachine.RotateEquip.TurnRound();
} }
public (bool,string) IsSafe() {
if (RobotManage.isRunning)
return (false, "Device is in automatic");
if (!RobotManage.mainMachine.IsAllDoorClosed())
return (false, "Safe door was not closed");
return (true, "");
}
private void button9_Click(object sender, EventArgs e) private void button9_Click(object sender, EventArgs e)
{ {
var r= RobotManage.RFID.ReOpen(); var r= RobotManage.RFID.ReOpen();
......
TheMachine/Program.cs
...@@ -25,6 +25,8 @@ namespace TheMachine ...@@ -25,6 +25,8 @@ namespace TheMachine
[STAThread] [STAThread]
static void Main() static void Main()
{ {
CameraPointTest.Init(); CameraPointTest.Init();
CameraPointTest.TestHasLabelOnDock(true); CameraPointTest.TestHasLabelOnDock(true);
//CameraPointTest.ScanRectangle(); //CameraPointTest.ScanRectangle();
......
TheMachine/SettingControl.Designer.cs
...@@ -38,17 +38,19 @@ namespace TheMachine ...@@ -38,17 +38,19 @@ namespace TheMachine
this.btn_printertest = new System.Windows.Forms.Button(); this.btn_printertest = new System.Windows.Forms.Button();
this.btn_labeledit = new System.Windows.Forms.Button(); this.btn_labeledit = new System.Windows.Forms.Button();
this.cb_labelselect = new System.Windows.Forms.ComboBox(); this.cb_labelselect = new System.Windows.Forms.ComboBox();
this.tabPage_ledtower = new System.Windows.Forms.TabPage(); this.tp = new System.Windows.Forms.TableLayoutPanel();
this.lbl_Liquidstatus = new System.Windows.Forms.Label(); this.lbl_Liquidstatus = new System.Windows.Forms.Label();
this.chbAutoRun = new System.Windows.Forms.CheckBox(); this.chbAutoRun = new System.Windows.Forms.CheckBox();
this.tp = new System.Windows.Forms.TableLayoutPanel(); this.tabPage_ledtower = new System.Windows.Forms.TabPage();
this.btn_testlabeling = new System.Windows.Forms.Button();
this.cb_labelingtestmoce = new System.Windows.Forms.CheckBox();
this.uC_SetUserPassword1 = new TheMachine.UC_SetUserPassword(); this.uC_SetUserPassword1 = new TheMachine.UC_SetUserPassword();
this.uC_LedConfig1 = new TheMachine.UC.UC_LedConfig(); this.uC_LedConfig1 = new TheMachine.UC.UC_LedConfig();
this.tabControl1.SuspendLayout(); this.tabControl1.SuspendLayout();
this.tabPage_set.SuspendLayout(); this.tabPage_set.SuspendLayout();
this.groupBox1.SuspendLayout(); this.groupBox1.SuspendLayout();
this.tabPage_ledtower.SuspendLayout();
this.tp.SuspendLayout(); this.tp.SuspendLayout();
this.tabPage_ledtower.SuspendLayout();
this.SuspendLayout(); this.SuspendLayout();
// //
// timer1 // timer1
...@@ -69,6 +71,8 @@ namespace TheMachine ...@@ -69,6 +71,8 @@ namespace TheMachine
// //
// tabPage_set // tabPage_set
// //
this.tabPage_set.Controls.Add(this.cb_labelingtestmoce);
this.tabPage_set.Controls.Add(this.btn_testlabeling);
this.tabPage_set.Controls.Add(this.groupBox1); this.tabPage_set.Controls.Add(this.groupBox1);
this.tabPage_set.Controls.Add(this.uC_SetUserPassword1); this.tabPage_set.Controls.Add(this.uC_SetUserPassword1);
this.tabPage_set.Controls.Add(this.tp); this.tabPage_set.Controls.Add(this.tp);
...@@ -131,16 +135,29 @@ namespace TheMachine ...@@ -131,16 +135,29 @@ namespace TheMachine
this.cb_labelselect.Size = new System.Drawing.Size(198, 20); this.cb_labelselect.Size = new System.Drawing.Size(198, 20);
this.cb_labelselect.TabIndex = 0; this.cb_labelselect.TabIndex = 0;
// //
// tabPage_ledtower // tp
// //
this.tabPage_ledtower.Controls.Add(this.uC_LedConfig1); this.tp.AutoSize = true;
this.tabPage_ledtower.Location = new System.Drawing.Point(4, 22); this.tp.AutoSizeMode = System.Windows.Forms.AutoSizeMode.GrowAndShrink;
this.tabPage_ledtower.Name = "tabPage_ledtower"; this.tp.ColumnCount = 2;
this.tabPage_ledtower.Padding = new System.Windows.Forms.Padding(3); this.tp.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tabPage_ledtower.Size = new System.Drawing.Size(1016, 714); this.tp.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 50F));
this.tabPage_ledtower.TabIndex = 1; this.tp.Controls.Add(this.chbAutoRun, 0, 7);
this.tabPage_ledtower.Text = "灯塔设置"; this.tp.Controls.Add(this.lbl_Liquidstatus, 0, 4);
this.tabPage_ledtower.UseVisualStyleBackColor = true; this.tp.Location = new System.Drawing.Point(18, 18);
this.tp.Name = "tp";
this.tp.RowCount = 9;
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle());
this.tp.Size = new System.Drawing.Size(136, 68);
this.tp.TabIndex = 6;
// //
// lbl_Liquidstatus // lbl_Liquidstatus
// //
...@@ -166,29 +183,38 @@ namespace TheMachine ...@@ -166,29 +183,38 @@ namespace TheMachine
this.chbAutoRun.Text = "开机自启动"; this.chbAutoRun.Text = "开机自启动";
this.chbAutoRun.UseVisualStyleBackColor = true; this.chbAutoRun.UseVisualStyleBackColor = true;
// //
// tp // tabPage_ledtower
// //
this.tp.AutoSize = true; this.tabPage_ledtower.Controls.Add(this.uC_LedConfig1);
this.tp.AutoSizeMode = System.Windows.Forms.AutoSizeMode.GrowAndShrink; this.tabPage_ledtower.Location = new System.Drawing.Point(4, 22);
this.tp.ColumnCount = 2; this.tabPage_ledtower.Name = "tabPage_ledtower";
this.tp.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 50F)); this.tabPage_ledtower.Padding = new System.Windows.Forms.Padding(3);
this.tp.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Percent, 50F)); this.tabPage_ledtower.Size = new System.Drawing.Size(1016, 714);
this.tp.Controls.Add(this.chbAutoRun, 0, 7); this.tabPage_ledtower.TabIndex = 1;
this.tp.Controls.Add(this.lbl_Liquidstatus, 0, 4); this.tabPage_ledtower.Text = "灯塔设置";
this.tp.Location = new System.Drawing.Point(18, 18); this.tabPage_ledtower.UseVisualStyleBackColor = true;
this.tp.Name = "tp"; //
this.tp.RowCount = 9; // btn_testlabeling
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); //
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.Enabled = false;
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.Location = new System.Drawing.Point(18, 377);
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.Name = "btn_testlabeling";
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.Size = new System.Drawing.Size(201, 38);
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.TabIndex = 13;
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.Text = "Test the labeling once";
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.UseVisualStyleBackColor = true;
this.tp.RowStyles.Add(new System.Windows.Forms.RowStyle()); this.btn_testlabeling.Click += new System.EventHandler(this.btn_testlabeling_Click);
this.tp.Size = new System.Drawing.Size(136, 68); //
this.tp.TabIndex = 6; // cb_labelingtestmoce
//
this.cb_labelingtestmoce.AutoSize = true;
this.cb_labelingtestmoce.Location = new System.Drawing.Point(18, 346);
this.cb_labelingtestmoce.Name = "cb_labelingtestmoce";
this.cb_labelingtestmoce.Size = new System.Drawing.Size(138, 16);
this.cb_labelingtestmoce.TabIndex = 14;
this.cb_labelingtestmoce.Text = "Labelling test mode";
this.cb_labelingtestmoce.UseVisualStyleBackColor = true;
this.cb_labelingtestmoce.CheckedChanged += new System.EventHandler(this.cb_labelingtestmoce_CheckedChanged);
// //
// uC_SetUserPassword1 // uC_SetUserPassword1
// //
...@@ -220,9 +246,9 @@ namespace TheMachine ...@@ -220,9 +246,9 @@ namespace TheMachine
this.tabPage_set.ResumeLayout(false); this.tabPage_set.ResumeLayout(false);
this.tabPage_set.PerformLayout(); this.tabPage_set.PerformLayout();
this.groupBox1.ResumeLayout(false); this.groupBox1.ResumeLayout(false);
this.tabPage_ledtower.ResumeLayout(false);
this.tp.ResumeLayout(false); this.tp.ResumeLayout(false);
this.tp.PerformLayout(); this.tp.PerformLayout();
this.tabPage_ledtower.ResumeLayout(false);
this.ResumeLayout(false); this.ResumeLayout(false);
} }
...@@ -242,5 +268,7 @@ namespace TheMachine ...@@ -242,5 +268,7 @@ namespace TheMachine
private System.Windows.Forms.TableLayoutPanel tp; private System.Windows.Forms.TableLayoutPanel tp;
private System.Windows.Forms.CheckBox chbAutoRun; private System.Windows.Forms.CheckBox chbAutoRun;
private System.Windows.Forms.Label lbl_Liquidstatus; private System.Windows.Forms.Label lbl_Liquidstatus;
private System.Windows.Forms.Button btn_testlabeling;
private System.Windows.Forms.CheckBox cb_labelingtestmoce;
} }
} }
TheMachine/SettingControl.cs
...@@ -166,5 +166,26 @@ namespace TheMachine ...@@ -166,5 +166,26 @@ namespace TheMachine
{ {
} }
private void btn_testlabeling_Click(object sender, EventArgs e)
{
if (!RobotManage.isRunning || RobotManage.mainMachine.runStatus != RunStatus.Running) {
MessageBox.Show("Please start the device first and complete the home reset");
return;
}
if (RobotManage.mainMachine.LabelingMoveInfo.MoveStep!= MoveStep.Wait)
{
MessageBox.Show("Please wait for the labeling action to end");
return;
}
RobotManage.mainMachine.LabelingMoveInfo.NewMove(MoveStep.Labeling01);
RobotManage.mainMachine.LabelingMoveInfo.log("开始一次贴标测试");
}
private void cb_labelingtestmoce_CheckedChanged(object sender, EventArgs e)
{
RobotManage.mainMachine.LabelingTestMode=cb_labelingtestmoce.Checked;
btn_testlabeling.Enabled = cb_labelingtestmoce.Checked;
}
} }
} }
\ No newline at end of file \ No newline at end of file
TheMachine/UC/CylinderButton.cs
...@@ -16,6 +16,7 @@ namespace TheMachine ...@@ -16,6 +16,7 @@ namespace TheMachine
using crc = OnlineStore.CodeResourceControl; using crc = OnlineStore.CodeResourceControl;
public class CylinderButton : Button public class CylinderButton : Button
{ {
public static event Func<(bool,string)> IsSafe;
Timer timer; Timer timer;
public CylinderButton() public CylinderButton()
{ {
...@@ -142,6 +143,13 @@ namespace TheMachine ...@@ -142,6 +143,13 @@ namespace TheMachine
} }
private void CylinderButton_Click(object sender, EventArgs e) private void CylinderButton_Click(object sender, EventArgs e)
{ {
if (IsSafe != null) {
var result = IsSafe.Invoke();
if (!result.Item1) {
MessageBox.Show(result.Item2);
return;
}
}
if (io_state.Equals(IO_VALUE.LOW)) if (io_state.Equals(IO_VALUE.LOW))
{ {
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!