Skip to content

刘韬 / 1069_MIMO_PlUS

转到一个项目
切换导航栏
切换导航栏固定状态
Commit f7f33da4 由 LN
选项

判断检测料盘有无功能

1 个父辈 99d0d6f3
内嵌 并排
正在显示 40 个修改的文件 包含 929 行增加 和 59 行删除
DLL/Microsoft.ML.OnnxRuntime.dll 0 → 100644
此文件类型无法预览
DLL/OpenCvSharp.dll 0 → 100644
此文件类型无法预览
DLL/OpenCvSharp.xml 0 → 100644
此文件的差异太大，无法显示。
DLL/SkiaSharp.dll 0 → 100644
此文件类型无法预览
DLL/SkiaSharp.xml 0 → 100644
此文件的差异太大，无法显示。
DLL/System.Buffers.dll 0 → 100644
此文件类型无法预览
DLL/System.Buffers.xml 0 → 100644
<?xml version="1.0" encoding="utf-8"?><doc>
<assembly>
<name>System.Buffers</name>
</assembly>
<members>
<member name="T:System.Buffers.ArrayPool`1">
<summary>Provides a resource pool that enables reusing instances of type <see cref="T[]"></see>.</summary>
<typeparam name="T">The type of the objects that are in the resource pool.</typeparam>
</member>
<member name="M:System.Buffers.ArrayPool`1.#ctor">
<summary>Initializes a new instance of the <see cref="T:System.Buffers.ArrayPool`1"></see> class.</summary>
</member>
<member name="M:System.Buffers.ArrayPool`1.Create">
<summary>Creates a new instance of the <see cref="T:System.Buffers.ArrayPool`1"></see> class.</summary>
<returns>A new instance of the <see cref="System.Buffers.ArrayPool`1"></see> class.</returns>
</member>
<member name="M:System.Buffers.ArrayPool`1.Create(System.Int32,System.Int32)">
<summary>Creates a new instance of the <see cref="T:System.Buffers.ArrayPool`1"></see> class using the specifed configuration.</summary>
<param name="maxArrayLength">The maximum length of an array instance that may be stored in the pool.</param>
<param name="maxArraysPerBucket">The maximum number of array instances that may be stored in each bucket in the pool. The pool groups arrays of similar lengths into buckets for faster access.</param>
<returns>A new instance of the <see cref="System.Buffers.ArrayPool`1"></see> class with the specified configuration.</returns>
</member>
<member name="M:System.Buffers.ArrayPool`1.Rent(System.Int32)">
<summary>Retrieves a buffer that is at least the requested length.</summary>
<param name="minimumLength">The minimum length of the array.</param>
<returns>An array of type <see cref="T[]"></see> that is at least <paramref name="minimumLength">minimumLength</paramref> in length.</returns>
</member>
<member name="M:System.Buffers.ArrayPool`1.Return(`0[],System.Boolean)">
<summary>Returns an array to the pool that was previously obtained using the <see cref="M:System.Buffers.ArrayPool`1.Rent(System.Int32)"></see> method on the same <see cref="T:System.Buffers.ArrayPool`1"></see> instance.</summary>
<param name="array">A buffer to return to the pool that was previously obtained using the <see cref="M:System.Buffers.ArrayPool`1.Rent(System.Int32)"></see> method.</param>
<param name="clearArray">Indicates whether the contents of the buffer should be cleared before reuse. If <paramref name="clearArray">clearArray</paramref> is set to true, and if the pool will store the buffer to enable subsequent reuse, the <see cref="M:System.Buffers.ArrayPool`1.Return(`0[],System.Boolean)"></see> method will clear the <paramref name="array">array</paramref> of its contents so that a subsequent caller using the <see cref="M:System.Buffers.ArrayPool`1.Rent(System.Int32)"></see> method will not see the content of the previous caller. If <paramref name="clearArray">clearArray</paramref> is set to false or if the pool will release the buffer, the array&amp;#39;s contents are left unchanged.</param>
</member>
<member name="P:System.Buffers.ArrayPool`1.Shared">
<summary>Gets a shared <see cref="T:System.Buffers.ArrayPool`1"></see> instance.</summary>
<returns>A shared <see cref="System.Buffers.ArrayPool`1"></see> instance.</returns>
</member>
</members>
</doc>
\ No newline at end of file \ No newline at end of file
DLL/System.Drawing.Common.dll 0 → 100644
此文件类型无法预览
DLL/System.Drawing.Common.xml 0 → 100644
此文件的差异太大，无法显示。
DLL/System.Memory.dll 0 → 100644
此文件类型无法预览
DLL/System.Memory.xml 0 → 100644
<?xml version="1.0" encoding="utf-8"?><doc>
<assembly>
<name>System.Memory</name>
</assembly>
<members>
<member name="T:System.Span`1">
<typeparam name="T"></typeparam>
</member>
<member name="M:System.Span`1.#ctor(`0[])">
<param name="array"></param>
</member>
<member name="M:System.Span`1.#ctor(System.Void*,System.Int32)">
<param name="pointer"></param>
<param name="length"></param>
</member>
<member name="M:System.Span`1.#ctor(`0[],System.Int32)">
<param name="array"></param>
<param name="start"></param>
</member>
<member name="M:System.Span`1.#ctor(`0[],System.Int32,System.Int32)">
<param name="array"></param>
<param name="start"></param>
<param name="length"></param>
</member>
<member name="M:System.Span`1.Clear">
</member>
<member name="M:System.Span`1.CopyTo(System.Span{`0})">
<param name="destination"></param>
</member>
<member name="M:System.Span`1.DangerousCreate(System.Object,`0@,System.Int32)">
<param name="obj"></param>
<param name="objectData"></param>
<param name="length"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.DangerousGetPinnableReference">
<returns></returns>
</member>
<member name="P:System.Span`1.Empty">
<returns></returns>
</member>
<member name="M:System.Span`1.Equals(System.Object)">
<param name="obj"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.Fill(`0)">
<param name="value"></param>
</member>
<member name="M:System.Span`1.GetHashCode">
<returns></returns>
</member>
<member name="P:System.Span`1.IsEmpty">
<returns></returns>
</member>
<member name="P:System.Span`1.Item(System.Int32)">
<param name="index"></param>
<returns></returns>
</member>
<member name="P:System.Span`1.Length">
<returns></returns>
</member>
<member name="M:System.Span`1.op_Equality(System.Span{`0},System.Span{`0})">
<param name="left"></param>
<param name="right"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.op_Implicit(System.ArraySegment{T})~System.Span{T}">
<param name="arraySegment"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.op_Implicit(System.Span{T})~System.ReadOnlySpan{T}">
<param name="span"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.op_Implicit(T[])~System.Span{T}">
<param name="array"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.op_Inequality(System.Span{`0},System.Span{`0})">
<param name="left"></param>
<param name="right"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.Slice(System.Int32)">
<param name="start"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.Slice(System.Int32,System.Int32)">
<param name="start"></param>
<param name="length"></param>
<returns></returns>
</member>
<member name="M:System.Span`1.ToArray">
<returns></returns>
</member>
<member name="M:System.Span`1.TryCopyTo(System.Span{`0})">
<param name="destination"></param>
<returns></returns>
</member>
<member name="T:System.SpanExtensions">
</member>
<member name="M:System.SpanExtensions.AsBytes``1(System.ReadOnlySpan{``0})">
<param name="source"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.AsBytes``1(System.Span{``0})">
<param name="source"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.AsSpan(System.String)">
<param name="text"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.AsSpan``1(System.ArraySegment{``0})">
<param name="arraySegment"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.AsSpan``1(``0[])">
<param name="array"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.CopyTo``1(``0[],System.Span{``0})">
<param name="array"></param>
<param name="destination"></param>
<typeparam name="T"></typeparam>
</member>
<member name="M:System.SpanExtensions.IndexOf(System.Span{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="span"></param>
<param name="value"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOf(System.Span{System.Byte},System.Byte)">
<param name="span"></param>
<param name="value"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOf(System.ReadOnlySpan{System.Byte},System.Byte)">
<param name="span"></param>
<param name="value"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOf(System.ReadOnlySpan{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="span"></param>
<param name="value"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOf``1(System.ReadOnlySpan{``0},System.ReadOnlySpan{``0})">
<param name="span"></param>
<param name="value"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOf``1(System.ReadOnlySpan{``0},``0)">
<param name="span"></param>
<param name="value"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOf``1(System.Span{``0},System.ReadOnlySpan{``0})">
<param name="span"></param>
<param name="value"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOf``1(System.Span{``0},``0)">
<param name="span"></param>
<param name="value"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOfAny(System.ReadOnlySpan{System.Byte},System.Byte,System.Byte,System.Byte)">
<param name="span"></param>
<param name="value0"></param>
<param name="value1"></param>
<param name="value2"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOfAny(System.Span{System.Byte},System.Byte,System.Byte,System.Byte)">
<param name="span"></param>
<param name="value0"></param>
<param name="value1"></param>
<param name="value2"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOfAny(System.Span{System.Byte},System.Byte,System.Byte)">
<param name="span"></param>
<param name="value0"></param>
<param name="value1"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOfAny(System.ReadOnlySpan{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="span"></param>
<param name="values"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOfAny(System.Span{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="span"></param>
<param name="values"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.IndexOfAny(System.ReadOnlySpan{System.Byte},System.Byte,System.Byte)">
<param name="span"></param>
<param name="value0"></param>
<param name="value1"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.NonPortableCast``2(System.ReadOnlySpan{``0})">
<param name="source"></param>
<typeparam name="TFrom"></typeparam>
<typeparam name="TTo"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.NonPortableCast``2(System.Span{``0})">
<param name="source"></param>
<typeparam name="TFrom"></typeparam>
<typeparam name="TTo"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.SequenceEqual(System.ReadOnlySpan{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="first"></param>
<param name="second"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.SequenceEqual(System.Span{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="first"></param>
<param name="second"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.SequenceEqual``1(System.ReadOnlySpan{``0},System.ReadOnlySpan{``0})">
<param name="first"></param>
<param name="second"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.SequenceEqual``1(System.Span{``0},System.ReadOnlySpan{``0})">
<param name="first"></param>
<param name="second"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.StartsWith(System.ReadOnlySpan{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="span"></param>
<param name="value"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.StartsWith(System.Span{System.Byte},System.ReadOnlySpan{System.Byte})">
<param name="span"></param>
<param name="value"></param>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.StartsWith``1(System.ReadOnlySpan{``0},System.ReadOnlySpan{``0})">
<param name="span"></param>
<param name="value"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="M:System.SpanExtensions.StartsWith``1(System.Span{``0},System.ReadOnlySpan{``0})">
<param name="span"></param>
<param name="value"></param>
<typeparam name="T"></typeparam>
<returns></returns>
</member>
<member name="T:System.ReadOnlySpan`1">
<typeparam name="T"></typeparam>
</member>
<member name="M:System.ReadOnlySpan`1.#ctor(`0[])">
<param name="array"></param>
</member>
<member name="M:System.ReadOnlySpan`1.#ctor(System.Void*,System.Int32)">
<param name="pointer"></param>
<param name="length"></param>
</member>
<member name="M:System.ReadOnlySpan`1.#ctor(`0[],System.Int32)">
<param name="array"></param>
<param name="start"></param>
</member>
<member name="M:System.ReadOnlySpan`1.#ctor(`0[],System.Int32,System.Int32)">
<param name="array"></param>
<param name="start"></param>
<param name="length"></param>
</member>
<member name="M:System.ReadOnlySpan`1.CopyTo(System.Span{`0})">
<param name="destination"></param>
</member>
<member name="M:System.ReadOnlySpan`1.DangerousCreate(System.Object,`0@,System.Int32)">
<param name="obj"></param>
<param name="objectData"></param>
<param name="length"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.DangerousGetPinnableReference">
<returns></returns>
</member>
<member name="P:System.ReadOnlySpan`1.Empty">
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.Equals(System.Object)">
<param name="obj"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.GetHashCode">
<returns></returns>
</member>
<member name="P:System.ReadOnlySpan`1.IsEmpty">
<returns></returns>
</member>
<member name="P:System.ReadOnlySpan`1.Item(System.Int32)">
<param name="index"></param>
<returns></returns>
</member>
<member name="P:System.ReadOnlySpan`1.Length">
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.op_Equality(System.ReadOnlySpan{`0},System.ReadOnlySpan{`0})">
<param name="left"></param>
<param name="right"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.op_Implicit(System.ArraySegment{T})~System.ReadOnlySpan{T}">
<param name="arraySegment"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.op_Implicit(T[])~System.ReadOnlySpan{T}">
<param name="array"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.op_Inequality(System.ReadOnlySpan{`0},System.ReadOnlySpan{`0})">
<param name="left"></param>
<param name="right"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.Slice(System.Int32)">
<param name="start"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.Slice(System.Int32,System.Int32)">
<param name="start"></param>
<param name="length"></param>
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.ToArray">
<returns></returns>
</member>
<member name="M:System.ReadOnlySpan`1.TryCopyTo(System.Span{`0})">
<param name="destination"></param>
<returns></returns>
</member>
</members>
</doc>
\ No newline at end of file \ No newline at end of file
DLL/System.Numerics.Vectors.dll 0 → 100644
此文件类型无法预览
DLL/System.Numerics.Vectors.xml 0 → 100644
此文件的差异太大，无法显示。
DLL/System.Runtime.CompilerServices.Unsafe.xml 0 → 100644
<?xml version="1.0" encoding="utf-8"?>
<doc>
<assembly>
<name>System.Runtime.CompilerServices.Unsafe</name>
</assembly>
<members>
<member name="T:System.Runtime.CompilerServices.Unsafe">
<summary>Contains generic, low-level functionality for manipulating pointers.</summary>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Add``1(``0@,System.Int32)">
<summary>Adds an element offset to the given reference.</summary>
<param name="source">The reference to add the offset to.</param>
<param name="elementOffset">The offset to add.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the addition of offset to pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Add``1(``0@,System.IntPtr)">
<summary>Adds an element offset to the given reference.</summary>
<param name="source">The reference to add the offset to.</param>
<param name="elementOffset">The offset to add.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the addition of offset to pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Add``1(``0@,System.UIntPtr)">
<summary>Adds an element offset to the given reference.</summary>
<param name="source">The reference to add the offset to.</param>
<param name="elementOffset">The offset to add.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the addition of offset to pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Add``1(System.Void*,System.Int32)">
<summary>Adds an element offset to the given void pointer.</summary>
<param name="source">The void pointer to add the offset to.</param>
<param name="elementOffset">The offset to add.</param>
<typeparam name="T">The type of void pointer.</typeparam>
<returns>A new void pointer that reflects the addition of offset to the specified pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.AddByteOffset``1(``0@,System.IntPtr)">
<summary>Adds a byte offset to the given reference.</summary>
<param name="source">The reference to add the offset to.</param>
<param name="byteOffset">The offset to add.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the addition of byte offset to pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.AddByteOffset``1(``0@,System.UIntPtr)">
<summary>Adds a byte offset to the given reference.</summary>
<param name="source">The reference to add the offset to.</param>
<param name="byteOffset">The offset to add.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the addition of byte offset to pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.AreSame``1(``0@,``0@)">
<summary>Determines whether the specified references point to the same location.</summary>
<param name="left">The first reference to compare.</param>
<param name="right">The second reference to compare.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>
<see langword="true" /> if <paramref name="left" /> and <paramref name="right" /> point to the same location; otherwise, <see langword="false" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.As``1(System.Object)">
<summary>Casts the given object to the specified type.</summary>
<param name="o">The object to cast.</param>
<typeparam name="T">The type which the object will be cast to.</typeparam>
<returns>The original object, casted to the given type.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.As``2(``0@)">
<summary>Reinterprets the given reference as a reference to a value of type <typeparamref name="TTo" />.</summary>
<param name="source">The reference to reinterpret.</param>
<typeparam name="TFrom">The type of reference to reinterpret.</typeparam>
<typeparam name="TTo">The desired type of the reference.</typeparam>
<returns>A reference to a value of type <typeparamref name="TTo" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.AsPointer``1(``0@)">
<summary>Returns a pointer to the given by-ref parameter.</summary>
<param name="value">The object whose pointer is obtained.</param>
<typeparam name="T">The type of object.</typeparam>
<returns>A pointer to the given value.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.AsRef``1(``0@)">
<summary>Reinterprets the given read-only reference as a reference.</summary>
<param name="source">The read-only reference to reinterpret.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A reference to a value of type <typeparamref name="T" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.AsRef``1(System.Void*)">
<summary>Reinterprets the given location as a reference to a value of type <typeparamref name="T" />.</summary>
<param name="source">The location of the value to reference.</param>
<typeparam name="T">The type of the interpreted location.</typeparam>
<returns>A reference to a value of type <typeparamref name="T" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.ByteOffset``1(``0@,``0@)">
<summary>Determines the byte offset from origin to target from the given references.</summary>
<param name="origin">The reference to origin.</param>
<param name="target">The reference to target.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>Byte offset from origin to target i.e. <paramref name="target" /> - <paramref name="origin" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Copy``1(``0@,System.Void*)">
<summary>Copies a value of type <typeparamref name="T" /> to the given location.</summary>
<param name="destination">The location to copy to.</param>
<param name="source">A pointer to the value to copy.</param>
<typeparam name="T">The type of value to copy.</typeparam>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Copy``1(System.Void*,``0@)">
<summary>Copies a value of type <typeparamref name="T" /> to the given location.</summary>
<param name="destination">The location to copy to.</param>
<param name="source">A reference to the value to copy.</param>
<typeparam name="T">The type of value to copy.</typeparam>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.CopyBlock(System.Byte@,System.Byte@,System.UInt32)">
<summary>Copies bytes from the source address to the destination address.</summary>
<param name="destination">The destination address to copy to.</param>
<param name="source">The source address to copy from.</param>
<param name="byteCount">The number of bytes to copy.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.CopyBlock(System.Void*,System.Void*,System.UInt32)">
<summary>Copies bytes from the source address to the destination address.</summary>
<param name="destination">The destination address to copy to.</param>
<param name="source">The source address to copy from.</param>
<param name="byteCount">The number of bytes to copy.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.CopyBlockUnaligned(System.Byte@,System.Byte@,System.UInt32)">
<summary>Copies bytes from the source address to the destination address without assuming architecture dependent alignment of the addresses.</summary>
<param name="destination">The destination address to copy to.</param>
<param name="source">The source address to copy from.</param>
<param name="byteCount">The number of bytes to copy.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.CopyBlockUnaligned(System.Void*,System.Void*,System.UInt32)">
<summary>Copies bytes from the source address to the destination address without assuming architecture dependent alignment of the addresses.</summary>
<param name="destination">The destination address to copy to.</param>
<param name="source">The source address to copy from.</param>
<param name="byteCount">The number of bytes to copy.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.InitBlock(System.Byte@,System.Byte,System.UInt32)">
<summary>Initializes a block of memory at the given location with a given initial value.</summary>
<param name="startAddress">The address of the start of the memory block to initialize.</param>
<param name="value">The value to initialize the block to.</param>
<param name="byteCount">The number of bytes to initialize.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.InitBlock(System.Void*,System.Byte,System.UInt32)">
<summary>Initializes a block of memory at the given location with a given initial value.</summary>
<param name="startAddress">The address of the start of the memory block to initialize.</param>
<param name="value">The value to initialize the block to.</param>
<param name="byteCount">The number of bytes to initialize.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.InitBlockUnaligned(System.Byte@,System.Byte,System.UInt32)">
<summary>Initializes a block of memory at the given location with a given initial value without assuming architecture dependent alignment of the address.</summary>
<param name="startAddress">The address of the start of the memory block to initialize.</param>
<param name="value">The value to initialize the block to.</param>
<param name="byteCount">The number of bytes to initialize.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.InitBlockUnaligned(System.Void*,System.Byte,System.UInt32)">
<summary>Initializes a block of memory at the given location with a given initial value without assuming architecture dependent alignment of the address.</summary>
<param name="startAddress">The address of the start of the memory block to initialize.</param>
<param name="value">The value to initialize the block to.</param>
<param name="byteCount">The number of bytes to initialize.</param>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.IsAddressGreaterThan``1(``0@,``0@)">
<summary>Returns a value that indicates whether a specified reference is greater than another specified reference.</summary>
<param name="left">The first value to compare.</param>
<param name="right">The second value to compare.</param>
<typeparam name="T">The type of the reference.</typeparam>
<returns>
<see langword="true" /> if <paramref name="left" /> is greater than <paramref name="right" />; otherwise, <see langword="false" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.IsAddressLessThan``1(``0@,``0@)">
<summary>Returns a value that indicates whether a specified reference is less than another specified reference.</summary>
<param name="left">The first value to compare.</param>
<param name="right">The second value to compare.</param>
<typeparam name="T">The type of the reference.</typeparam>
<returns>
<see langword="true" /> if <paramref name="left" /> is less than <paramref name="right" />; otherwise, <see langword="false" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.IsNullRef``1(``0@)">
<summary>Determines if a given reference to a value of type <typeparamref name="T" /> is a null reference.</summary>
<param name="source">The reference to check.</param>
<typeparam name="T">The type of the reference.</typeparam>
<returns>
<see langword="true" /> if <paramref name="source" /> is a null reference; otherwise, <see langword="false" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.NullRef``1">
<summary>Returns a reference to a value of type <typeparamref name="T" /> that is a null reference.</summary>
<typeparam name="T">The type of the reference.</typeparam>
<returns>A reference to a value of type <typeparamref name="T" /> that is a null reference.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Read``1(System.Void*)">
<summary>Reads a value of type <typeparamref name="T" /> from the given location.</summary>
<param name="source">The location to read from.</param>
<typeparam name="T">The type to read.</typeparam>
<returns>An object of type <typeparamref name="T" /> read from the given location.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.ReadUnaligned``1(System.Byte@)">
<summary>Reads a value of type <typeparamref name="T" /> from the given location without assuming architecture dependent alignment of the addresses.</summary>
<param name="source">The location to read from.</param>
<typeparam name="T">The type to read.</typeparam>
<returns>An object of type <typeparamref name="T" /> read from the given location.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.ReadUnaligned``1(System.Void*)">
<summary>Reads a value of type <typeparamref name="T" /> from the given location without assuming architecture dependent alignment of the addresses.</summary>
<param name="source">The location to read from.</param>
<typeparam name="T">The type to read.</typeparam>
<returns>An object of type <typeparamref name="T" /> read from the given location.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.SizeOf``1">
<summary>Returns the size of an object of the given type parameter.</summary>
<typeparam name="T">The type of object whose size is retrieved.</typeparam>
<returns>The size of an object of type <typeparamref name="T" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.SkipInit``1(``0@)">
<summary>Bypasses definite assignment rules for a given value.</summary>
<param name="value">The uninitialized object.</param>
<typeparam name="T">The type of the uninitialized object.</typeparam>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Subtract``1(``0@,System.Int32)">
<summary>Subtracts an element offset from the given reference.</summary>
<param name="source">The reference to subtract the offset from.</param>
<param name="elementOffset">The offset to subtract.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the subtraction of offset from pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Subtract``1(``0@,System.IntPtr)">
<summary>Subtracts an element offset from the given reference.</summary>
<param name="source">The reference to subtract the offset from.</param>
<param name="elementOffset">The offset to subtract.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the subtraction of offset from pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Subtract``1(``0@,System.UIntPtr)">
<summary>Subtracts an element offset from the given reference.</summary>
<param name="source">The reference to subtract the offset from.</param>
<param name="elementOffset">The offset to subtract.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the subraction of offset from pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Subtract``1(System.Void*,System.Int32)">
<summary>Subtracts an element offset from the given void pointer.</summary>
<param name="source">The void pointer to subtract the offset from.</param>
<param name="elementOffset">The offset to subtract.</param>
<typeparam name="T">The type of the void pointer.</typeparam>
<returns>A new void pointer that reflects the subtraction of offset from the specified pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.SubtractByteOffset``1(``0@,System.IntPtr)">
<summary>Subtracts a byte offset from the given reference.</summary>
<param name="source">The reference to subtract the offset from.</param>
<param name="byteOffset">The offset to subtract.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the subtraction of byte offset from pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.SubtractByteOffset``1(``0@,System.UIntPtr)">
<summary>Subtracts a byte offset from the given reference.</summary>
<param name="source">The reference to subtract the offset from.</param>
<param name="byteOffset">The offset to subtract.</param>
<typeparam name="T">The type of reference.</typeparam>
<returns>A new reference that reflects the subraction of byte offset from pointer.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Unbox``1(System.Object)">
<summary>Returns a <see langword="mutable ref" /> to a boxed value.</summary>
<param name="box">The value to unbox.</param>
<typeparam name="T">The type to be unboxed.</typeparam>
<exception cref="T:System.NullReferenceException">
<paramref name="box" /> is <see langword="null" />, and <typeparamref name="T" /> is a non-nullable value type.</exception>
<exception cref="T:System.InvalidCastException">
<paramref name="box" /> is not a boxed value type.
-or-
<paramref name="box" /> is not a boxed <typeparamref name="T" />.</exception>
<exception cref="T:System.TypeLoadException">
<typeparamref name="T" /> cannot be found.</exception>
<returns>A <see langword="mutable ref" /> to the boxed value <paramref name="box" />.</returns>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.Write``1(System.Void*,``0)">
<summary>Writes a value of type <typeparamref name="T" /> to the given location.</summary>
<param name="destination">The location to write to.</param>
<param name="value">The value to write.</param>
<typeparam name="T">The type of value to write.</typeparam>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.WriteUnaligned``1(System.Byte@,``0)">
<summary>Writes a value of type <typeparamref name="T" /> to the given location without assuming architecture dependent alignment of the addresses.</summary>
<param name="destination">The location to write to.</param>
<param name="value">The value to write.</param>
<typeparam name="T">The type of value to write.</typeparam>
</member>
<member name="M:System.Runtime.CompilerServices.Unsafe.WriteUnaligned``1(System.Void*,``0)">
<summary>Writes a value of type <typeparamref name="T" /> to the given location without assuming architecture dependent alignment of the addresses.</summary>
<param name="destination">The location to write to.</param>
<param name="value">The value to write.</param>
<typeparam name="T">The type of value to write.</typeparam>
</member>
</members>
</doc>
\ No newline at end of file \ No newline at end of file
DLL/XiGaoDeepL.exe 0 → 100644
此文件类型无法预览
DLL/XiGaoDeepL.exe.config 0 → 100644
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
</startup>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
\ No newline at end of file \ No newline at end of file
DLL/libSkiaSharp.dylib 0 → 100644
此文件太大，无法显示。
DLL/onnxruntime.dll 0 → 100644
此文件类型无法预览
DeviceLibrary/DeviceLibrary.csproj
...@@ -53,13 +53,26 @@ ...@@ -53,13 +53,26 @@
<Reference Include="log4net"> <Reference Include="log4net">
<HintPath>..\DLL\log4net.dll</HintPath> <HintPath>..\DLL\log4net.dll</HintPath>
</Reference> </Reference>
<Reference Include="Microsoft.ML.OnnxRuntime">
<HintPath>..\DLL\Microsoft.ML.OnnxRuntime.dll</HintPath>
</Reference>
<Reference Include="Newtonsoft.Json, Version=13.0.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, processorArchitecture=MSIL"> <Reference Include="Newtonsoft.Json, Version=13.0.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, processorArchitecture=MSIL">
<HintPath>..\packages\Newtonsoft.Json.13.0.1\lib\net45\Newtonsoft.Json.dll</HintPath> <HintPath>..\packages\Newtonsoft.Json.13.0.1\lib\net45\Newtonsoft.Json.dll</HintPath>
</Reference> </Reference>
<Reference Include="OpenCvSharp">
<HintPath>..\DLL\OpenCvSharp.dll</HintPath>
</Reference>
<Reference Include="SkiaSharp">
<HintPath>..\DLL\SkiaSharp.dll</HintPath>
</Reference>
<Reference Include="System" /> <Reference Include="System" />
<Reference Include="System.Configuration.Install" /> <Reference Include="System.Configuration.Install" />
<Reference Include="System.Core" /> <Reference Include="System.Core" />
<Reference Include="System.Drawing" /> <Reference Include="System.Drawing" />
<Reference Include="System.Memory, Version=4.0.1.2, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
<SpecificVersion>False</SpecificVersion>
<HintPath>..\DLL\System.Memory.dll</HintPath>
</Reference>
<Reference Include="System.ServiceProcess" /> <Reference Include="System.ServiceProcess" />
<Reference Include="System.ValueTuple, Version=4.0.3.0, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL"> <Reference Include="System.ValueTuple, Version=4.0.3.0, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
<HintPath>..\packages\System.ValueTuple.4.5.0\lib\net461\System.ValueTuple.dll</HintPath> <HintPath>..\packages\System.ValueTuple.4.5.0\lib\net461\System.ValueTuple.dll</HintPath>
...@@ -144,6 +157,9 @@ ...@@ -144,6 +157,9 @@
<None Include="Config\coverroi.json"> <None Include="Config\coverroi.json">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory> <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</None> </None>
<None Include="model\PanDian_RoCut_320.onnx">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</None>
<None Include="packages.config" /> <None Include="packages.config" />
<None Include="StoreConfig\fixPositions.csv"> <None Include="StoreConfig\fixPositions.csv">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory> <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
...@@ -155,6 +171,23 @@ ...@@ -155,6 +171,23 @@
<ItemGroup> <ItemGroup>
<WCFMetadata Include="Connected Services\" /> <WCFMetadata Include="Connected Services\" />
</ItemGroup> </ItemGroup>
<ItemGroup /> <ItemGroup>
<Content Include="model\test_image\1.jpg">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</Content>
<Content Include="model\test_image\11573.jpg" />
<Content Include="model\test_image\1580.jpg" />
<Content Include="model\test_image\1609.jpg" />
<Content Include="model\test_image\1839.jpg" />
<Content Include="model\test_image\1985.jpg" />
<Content Include="model\test_image\2.jpg" />
<Content Include="model\test_image\2193.jpg" />
<Content Include="model\test_image\2358.jpg" />
<Content Include="model\test_image\2842.jpg" />
<Content Include="model\test_image\2986.jpg" />
<Content Include="model\test_image\3.jpg" />
<Content Include="model\test_image\3190.jpg" />
<Content Include="model\test_image\3759.jpg" />
</ItemGroup>
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
</Project> </Project>
\ No newline at end of file \ No newline at end of file
DeviceLibrary/DeviceLibrary/reelCheck/ReelCheckUtil-old.cs 0 → 100644
using Newtonsoft.Json;
using OnlineStore.Common;
using System;
using System.IO;
using System.Runtime.InteropServices;
namespace DeviceLibrary
{
public class ReelCheckUtil
{
[DllImport("reelCheck.dll", CharSet = CharSet.Ansi)]
internal static extern string ReadX(string json);
private static bool HasNeox()
{
if (File.Exists("reelCheck.dll"))
return true;
if (File.Exists(Path.Combine(System.AppDomain.CurrentDomain.BaseDirectory, "reelCheck.dll")))
return true;
return false;
}
public static int ReelCheck(string equipName, string currImg)
{
if (!HasNeox())
{
LogUtil.info($"{equipName} ReelCheck 未找到NeoX.dll，直接返回原位置");
return -1;
}
try
{
var d = new NeoXData();
d.imgPath = currImg;
var s = JsonConvert.SerializeObject(d);
string result = ReadX(s);
NeoRData data = JsonConvert.DeserializeObject<NeoRData>(result);
LogUtil.info($"{equipName} 图片[{currImg}] ReelCheck ，返回：{result}");
if (data.result1 >= 0)
{
return data.result1;
}
}
catch (Exception ex)
{
LogUtil.error($"{equipName} ReelCheck ,{currImg} 出错：{ex.ToString()}");
}
return -1;
}
}
internal class NeoXData
{
//输入图像路径
public string imgPath;
//料盘宽度
public int plateW = 0;
//输出图像路径
public string outPath;
//算法名称
public string Algo;
//剪裁像素
public int shrinkOffset;
//剪裁角落
public int Corner = 0;
}
internal class NeoRData
{
/// <summary>
/// Result1 =1有料盘，=0无料盘
/// </summary>
public int result1 = 0;
public int result2 = 0;
public int code = -1;
public string msg = "";
}
}
DeviceLibrary/DeviceLibrary/reelCheck/ReelCheckUtil.cs
using Newtonsoft.Json; using System;
using System.Linq;
using SkiaSharp;
using OpenCvSharp; //注：OpenCvSharp4 和 OpenCvSharp4.runtime.win
using Microsoft.ML.OnnxRuntime;
using Microsoft.ML.OnnxRuntime.Tensors;
using System.IO;
using OnlineStore.Common; using OnlineStore.Common;
using System;
using System.IO;
using System.Runtime.InteropServices;
namespace DeviceLibrary namespace DeviceLibrary
{ {
public class ReelCheckUtil public class ReelCheckUtil
{ {
[DllImport("reelCheck.dll", CharSet = CharSet.Ansi)]
internal static extern string ReadX(string json);
private static bool HasNeox()
{
if (File.Exists("reelCheck.dll"))
return true;
if (File.Exists(Path.Combine(System.AppDomain.CurrentDomain.BaseDirectory, "reelCheck.dll"))) private static string Model_Path = @"model/PanDian_RoCut_320.onnx";
return true; private static string Test_ImgPath = @"model/test_image/1.jpg";
return false; //推测函数
} public static int ReelCheck( string imagePath, string modelPath="")
public static int ReelCheck(string equipName, string currImg)
{ {
if (!HasNeox())
{
LogUtil.info($"{equipName} ReelCheck 未找到NeoX.dll，直接返回原位置");
return -1;
}
try try
{ {
if (modelPath == "")
{
modelPath = Model_Path;
}
if(!File.Exists(imagePath)&&File.Exists(Test_ImgPath))
{
LogUtil.info($"ReelCheck 未找到文件{imagePath} ，使用测试文件：{Test_ImgPath}");
imagePath = Test_ImgPath;
}
else
{
imagePath = Test_ImgPath;
}
float score_0 = 0.8f; //判断为 “ 无 ” 的得分阈值
float score_1 = 0.8f; //判断为 “ 有 ” 的得分阈值
Mat src = Cv2.ImRead(imagePath);
Point2f center = new Point2f(src.Cols / 2.0f, src.Rows / 2.0f);
double angle = 4.0;
Mat rotMat = Cv2.GetRotationMatrix2D(center, angle, 1.0);
Mat dst = new Mat();
Cv2.WarpAffine(src, dst, rotMat, src.Size());
Rect rect = new Rect(200, 590, 300, 100);
Mat roi = new Mat(dst, rect);
var d = new NeoXData(); using (var session = new InferenceSession(modelPath))
d.imgPath = currImg;
var s = JsonConvert.SerializeObject(d);
string result = ReadX(s);
NeoRData data = JsonConvert.DeserializeObject<NeoRData>(result);
LogUtil.info($"{equipName} 图片[{currImg}] ReelCheck ，返回：{result}");
if (data.result1 >= 0)
{ {
return data.result1; var images = NamedOnnxValue.CreateFromTensor("images", LoadImageAsTensor(roi));
using (var results = session.Run(new[] { images }))
{
var output = results.FirstOrDefault(r => r.Name == "output0")?.AsTensor<float>();
if (output != null)
{
var outputArray = output.ToArray();
float probabilityClass0 = outputArray[0];
float probabilityClass1 = outputArray[1];
int predictedClass;
if (probabilityClass1 > score_1) { predictedClass = 1; }
else if (probabilityClass0 > score_0) { predictedClass = 0; }
else { predictedClass = 2; }
for (int i = 0; i < outputArray.Length; i++)
{
Console.WriteLine("Class " + i + ": " + outputArray[i].ToString("F2"));
}
return predictedClass;
}
else
{
Console.WriteLine("No output found with the name 'output0'.");
return -1;
}
}
} }
} }
catch (Exception ex) catch (Exception ex)
{ {
LogUtil.error($"{equipName} ReelCheck ,{currImg} 出错：{ex.ToString()}"); Console.WriteLine("An error occurred: " + ex.Message);
Console.WriteLine("Stack Trace: " + ex.StackTrace);
return -1;
} }
return -1;
} }
}
internal class NeoXData
{
//输入图像路径
public string imgPath;
//料盘宽度
public int plateW = 0;
//输出图像路径
public string outPath;
//算法名称
public string Algo;
//剪裁像素
public int shrinkOffset;
//剪裁角落
public int Corner = 0;
} //张量变换函数
internal class NeoRData static Tensor<float> LoadImageAsTensor(Mat roi)
{ {
/// <summary> using (var bitmap = SKBitmap.Decode(roi.ToMemoryStream()))
/// Result1 =1有料盘，=0无料盘 {
/// </summary> int targetWidth = 320;
public int result1 = 0; int targetHeight = 320;
public int result2 = 0; using (var resizedBitmap = bitmap.Resize(new SKImageInfo(targetWidth, targetHeight), SKFilterQuality.High))
public int code = -1; {
public string msg = ""; var tensor = new DenseTensor<float>(new[] { 1, 3, targetHeight, targetWidth });
for (int y = 0; y < targetHeight; y++)
{
for (int x = 0; x < targetWidth; x++)
{
SKColor color = resizedBitmap.GetPixel(x, y);
tensor[0, 0, y, x] = color.Red / 255.0f;
tensor[0, 1, y, x] = color.Green / 255.0f;
tensor[0, 2, y, x] = color.Blue / 255.0f;
}
}
return tensor;
}
}
}
} }
} }
DeviceLibrary/app.config 0 → 100644
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="log4net" publicKeyToken="669e0ddf0bb1aa2a" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.0.12.0" newVersion="2.0.12.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
\ No newline at end of file \ No newline at end of file
TheMachine/App.config
<?xml version="1.0" encoding="utf-8"?> <?xml version="1.0" encoding="utf-8"?>
<configuration> <configuration>
<configSections> <configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" /> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" />
...@@ -66,6 +66,10 @@ ...@@ -66,6 +66,10 @@
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" /> <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-13.0.0.0" newVersion="13.0.0.0" /> <bindingRedirect oldVersion="0.0.0.0-13.0.0.0" newVersion="13.0.0.0" />
</dependentAssembly> </dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="log4net" publicKeyToken="669e0ddf0bb1aa2a" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.0.12.0" newVersion="2.0.12.0" />
</dependentAssembly>
</assemblyBinding> </assemblyBinding>
</runtime> </runtime>
<system.web> <system.web>
......
TheMachineNView/App.config
<?xml version="1.0" encoding="utf-8"?> <?xml version="1.0" encoding="utf-8"?>
<configuration> <configuration>
<configSections> <configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" /> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" />
...@@ -66,6 +66,10 @@ ...@@ -66,6 +66,10 @@
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" /> <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-13.0.0.0" newVersion="13.0.0.0" /> <bindingRedirect oldVersion="0.0.0.0-13.0.0.0" newVersion="13.0.0.0" />
</dependentAssembly> </dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="log4net" publicKeyToken="669e0ddf0bb1aa2a" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.0.12.0" newVersion="2.0.12.0" />
</dependentAssembly>
</assemblyBinding> </assemblyBinding>
</runtime> </runtime>
<system.web> <system.web>
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!