Skip to content

刘韬 / 1069_MIMO_PlUS

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 6ac85ea1 由 刘韬
选项

1

1 个父辈 fc21d0ff
内嵌 并排
正在显示 9 个修改的文件 包含 1533 行增加 和 24 行删除
DLL/Asa.Camera.VisionLib.dll 0 → 100644
此文件类型无法预览
DLL/Asa.Camera.VisionLib.xml 0 → 100644
<?xml version="1.0"?>
<doc>
<assembly>
<name>Asa.Camera.VisionLib</name>
</assembly>
<members>
<member name="M:CameraVisionLib.Model.BarcodeAPI.eyemImageRead(System.String,System.Int32,CameraVisionLib.Model.BarcodeAPI.EyemImage@)">
<summary>
读取图像
</summary>
<param name="filename"></param>
<param name="iFalgs"></param>
<param name="ucpImage"></param>
<returns></returns>
</member>
<member name="M:CameraVisionLib.Model.BarcodeAPI.eyemImageFree(System.IntPtr)">
<summary>
释放图像资源
</summary>
<param name="ipImage"></param>
</member>
<member name="M:CameraVisionLib.Model.BarcodeAPI.eyemDetectAndDecodeFree(System.IntPtr)">
<summary>
释放工具
</summary>
<param name="hObject"></param>
<returns></returns>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemImage.ucpImage">
<summary>
地址
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemImage.iWidth">
<summary>
图像内存 x 方向大小
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemImage.iHeight">
<summary>
图像内存 y 方向大小
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemImage.iChannel">
<summary>
图像通道数
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemRect.iXs">
<summary>
起始点（左上角） x 坐标
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemRect.iYs">
<summary>
起始点（左上角） y 坐标
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemRect.iWidth">
<summary>
x 方向大小（宽度）
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemRect.iHeight">
<summary>
y 方向大小（高度）
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemBarCode.dAngle">
<summary>
角度
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemBarCode.iCenterX">
<summary>
x坐标
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemBarCode.iCenterY">
<summary>
y坐标
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemBarCode.hType">
<summary>
码类型
</summary>
</member>
<member name="F:CameraVisionLib.Model.BarcodeAPI.EyemBarCode.hText">
<summary>
码内容
</summary>
</member>
<member name="T:CameraVisionLib.Model.BarcodeInfo">
<summary>
条码信息，1DBarcode、2DBarcode
</summary>
</member>
<member name="P:CameraVisionLib.Model.BarcodeInfo.Text">
<summary>
文本
</summary>
</member>
<member name="P:CameraVisionLib.Model.BarcodeInfo.CodeType">
<summary>
条码类型
</summary>
</member>
<member name="P:CameraVisionLib.Model.BarcodeInfo.Center">
<summary>
中心点
</summary>
</member>
<member name="P:CameraVisionLib.Model.BarcodeInfo.Angle">
<summary>
角度，3点钟方向0°，逆时针为正，顺时针为负。
</summary>
</member>
<member name="P:CameraVisionLib.Model.BarcodeInfo.Size">
<summary>
条码尺寸大小
</summary>
</member>
<member name="P:CameraVisionLib.Model.BarcodeInfo.Distance">
<summary>
原点垂直于经过中心点的直线的距离
</summary>
</member>
<member name="M:CameraVisionLib.Model.BarcodeInfo.Clone">
<summary>
副本，深拷贝
</summary>
<returns></returns>
</member>
<member name="T:CameraVisionLib.Model.ScanCodeOrder">
<summary>
扫描条码的顺序
</summary>
</member>
<member name="F:CameraVisionLib.Model.ScanCodeOrder.HalconOnly">
<summary>
仅使用Halcon
</summary>
</member>
<member name="F:CameraVisionLib.Model.ScanCodeOrder.EyemLibOnly">
<summary>
仅使用EyemLib
</summary>
</member>
<member name="F:CameraVisionLib.Model.ScanCodeOrder.HalconEyemLib">
<summary>
优先Halcon，扫码失败时使用EyemLib
</summary>
</member>
<member name="F:CameraVisionLib.Model.ScanCodeOrder.EyemLibHalcon">
<summary>
优先EyemLib，扫码失败时使用Halcon
</summary>
</member>
<member name="T:CameraVisionLib.Model.CodeType">
<summary>
条码类型
</summary>
</member>
<member name="F:CameraVisionLib.Model.CodeType.All">
<summary>
一维和二维条码
</summary>
</member>
<member name="F:CameraVisionLib.Model.CodeType.Barcode1D">
<summary>
一维条码
</summary>
</member>
<member name="F:CameraVisionLib.Model.CodeType.Barcode2D">
<summary>
二维条码，QRCode，DataMatrix，PDF417
</summary>
</member>
<member name="T:CameraVisionLib.Model.IPCameraAPI">
<summary>
CHCNetSDK 的摘要说明。
</summary>
</member>
<member name="F:CameraVisionLib.Model.IPCameraAPI.NET_DVR_IPADDR.sIpV4">
char[16]
</member>
<member name="F:CameraVisionLib.Model.IPCameraAPI.NET_DVR_IPADDR.byRes">
BYTE[128]
</member>
<member name="F:CameraVisionLib.Model.IPCameraAPI.NET_DVR_ATM_FRAMEFORMAT_V30.byRes1">
输入方式:0-网络监听、1网络协议、2-串口监听、3-串口协议
</member>
<member name="F:CameraVisionLib.Model.IPCameraAPI.NET_VCA_POLYGON.dwPointNum">
DWORD->unsigned int
</member>
<member name="F:CameraVisionLib.Model.IPCameraAPI.MAX_OVERLAP_ITEM_NUM">
抓拍机
</member>
<member name="T:CameraVisionLib.Model.IPCameraInfo">
<summary>
登录信息
</summary>
</member>
<member name="T:Asa.Barcode.Identify">
<summary>
条码识别，1DBarcode、2DBarcode
</summary>
</member>
<member name="M:Asa.Barcode.Identify.#ctor(CameraVisionLib.Model.ScanParam)">
<summary>
条码识别，1DBarcode、2DBarcode
</summary>
<param name="param"></param>
</member>
<member name="M:Asa.Barcode.Identify.GetCode(System.Drawing.Bitmap)">
<summary>
获取条码
</summary>
<param name="image"></param>
<returns></returns>
</member>
<member name="T:Asa.Camera.VisionLib">
<summary>
视觉库
</summary>
</member>
<member name="M:Asa.Camera.VisionLib.#ctor(System.String,System.Boolean,System.String)">
<summary>
视觉库
</summary>
<param name="configPath"></param>
<param name="preload"></param>
<param name="logName"></param>
</member>
<member name="M:Asa.Camera.VisionLib.Dispose">
<summary>
释放
</summary>
</member>
<member name="P:Asa.Camera.VisionLib.Count">
<summary>
相机数量
</summary>
</member>
<member name="M:Asa.Camera.VisionLib.Load">
<summary>
加载相机，有预加载了就不需要调用
</summary>
</member>
<member name="M:Asa.Camera.VisionLib.SaveAsConfig(System.String)">
<summary>
另存为配置文件
</summary>
<param name="path"></param>
</member>
<member name="M:Asa.Camera.VisionLib.GetCameraName">
<summary>
获取相机名称
</summary>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.Open">
<summary>
打开
</summary>
</member>
<member name="M:Asa.Camera.VisionLib.Open(System.String)">
<summary>
打开
</summary>
<param name="cameraName"></param>
</member>
<member name="M:Asa.Camera.VisionLib.Close">
<summary>
关闭
</summary>
</member>
<member name="M:Asa.Camera.VisionLib.Close(System.String)">
<summary>
关闭
</summary>
<param name="cameraName"></param>
</member>
<member name="M:Asa.Camera.VisionLib.GetImage">
<summary>
获取当前图像
</summary>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetImage(System.Int32)">
<summary>
按索引获取当前图像
</summary>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetImage(System.String)">
<summary>
获取当前图像
</summary>
<param name="cameraName"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.SaveImage(System.String,System.String,System.Drawing.Imaging.ImageFormat)">
<summary>
保存当前图像
</summary>
<param name="path">文件夹路径</param>
<param name="fileName">文件名，不带扩展名</param>
<param name="format">图像类型</param>
</member>
<member name="M:Asa.Camera.VisionLib.SaveImage(System.String,System.String,System.String,System.Drawing.Imaging.ImageFormat)">
<summary>
保存当前图像
</summary>
<param name="cameraName">相机名称</param>
<param name="path">文件夹路径</param>
<param name="fileName">文件名，不带扩展名</param>
<param name="format">图像类型</param>
</member>
<member name="M:Asa.Camera.VisionLib.PreviewImage(System.String,System.IntPtr)">
<summary>
预览图像，目前仅支持 HIK.IPCamera
</summary>
<param name="cameraName"></param>
<param name="handle"></param>
</member>
<member name="M:Asa.Camera.VisionLib.GetBarCodeText(System.Collections.Generic.List{System.Drawing.Bitmap}@)">
<summary>
从相机图像获取条码
</summary>
<param name="image"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetBarCodeText(System.String,System.Drawing.Bitmap@)">
<summary>
从相机图像获取条码
</summary>
<param name="cameraName"></param>
<param name="image"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetBarCodeText(System.Drawing.Bitmap)">
<summary>
从给定的图像中获取条码文本
</summary>
<param name="bmp"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetBarCodeText(System.Collections.Generic.List{CameraVisionLib.Model.BarcodeInfo})">
<summary>
从给定的条码中获取条码文本
</summary>
<param name="info"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetBarCode(System.Collections.Generic.List{System.Drawing.Bitmap}@)">
<summary>
从相机图像获取条码
</summary>
<param name="image"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetBarCode(System.String,System.Drawing.Bitmap@)">
<summary>
从相机图像获取条码
</summary>
<param name="cameraName"></param>
<param name="image"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.GetBarCode(System.Drawing.Bitmap)">
<summary>
从给定的图像中获取条码
</summary>
<param name="bmp"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.FeatureSingleCompare(System.String,System.String,System.Collections.Generic.Dictionary{System.String,System.Boolean}@,System.Drawing.Bitmap@)">
<summary>
特征单张比较图，没有原图
</summary>
<param name="cameraName"></param>
<param name="planName"></param>
<param name="exist"></param>
<param name="image"></param>
<returns></returns>
</member>
<member name="M:Asa.Camera.VisionLib.FeatureSingleCompare(System.Drawing.Bitmap,System.String,System.String,System.Collections.Generic.Dictionary{System.String,System.Boolean}@)">
<summary>
特征单张比较图，没有原图
</summary>
<param name="bmp"></param>
<param name="cameraName"></param>
<param name="planName"></param>
<param name="exist"></param>
<returns></returns>
</member>
<member name="F:Asa.Camera.FrmOpenCamera.components">
<summary>
Required designer variable.
</summary>
</member>
<member name="M:Asa.Camera.FrmOpenCamera.Dispose(System.Boolean)">
<summary>
Clean up any resources being used.
</summary>
<param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
</member>
<member name="M:Asa.Camera.FrmOpenCamera.InitializeComponent">
<summary>
Required method for Designer support - do not modify
the contents of this method with the code editor.
</summary>
</member>
<member name="F:Asa.Camera.FrmSetting.components">
<summary>
Required designer variable.
</summary>
</member>
<member name="M:Asa.Camera.FrmSetting.Dispose(System.Boolean)">
<summary>
Clean up any resources being used.
</summary>
<param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
</member>
<member name="M:Asa.Camera.FrmSetting.InitializeComponent">
<summary>
Required method for Designer support - do not modify
the contents of this method with the code editor.
</summary>
</member>
<member name="T:Asa.HIK.IPCamera">
<summary>
网络监控摄像机
</summary>
</member>
<member name="M:Asa.HIK.IPCamera.#ctor(System.Collections.Generic.List{CameraVisionLib.Model.IPCameraInfo})">
<summary>
网络监控摄像机
</summary>
<param name="info"></param>
</member>
<member name="P:Asa.HIK.IPCamera.Name">
<summary>
相机名称
</summary>
</member>
<member name="P:Asa.HIK.IPCamera.Count">
<summary>
相机总数
</summary>
</member>
<member name="P:Asa.HIK.IPCamera.IsOpen">
<summary>
相机是否打开
</summary>
</member>
<member name="P:Asa.HIK.IPCamera.Size">
<summary>
图像分辨率
</summary>
</member>
<member name="P:Asa.HIK.IPCamera.Image">
<summary>
相机获取到的图像
</summary>
</member>
<member name="M:Asa.HIK.IPCamera.Load">
<summary>
加载
</summary>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.Dispose">
<summary>
释放所有
</summary>
</member>
<member name="M:Asa.HIK.IPCamera.OpenAll">
<summary>
打开所有摄像机
</summary>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.CloseAll">
<summary>
关闭所有摄像机
</summary>
</member>
<member name="M:Asa.HIK.IPCamera.Open(System.Int32)">
<summary>
打开摄像机
</summary>
<param name="cameraIndex"></param>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.Open(System.String)">
<summary>
打开摄像机
</summary>
<param name="cameraName"></param>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.Close(System.Int32)">
<summary>
关闭摄像机
</summary>
<param name="cameraIndex"></param>
</member>
<member name="M:Asa.HIK.IPCamera.Close(System.String)">
<summary>
关闭摄像机
</summary>
<param name="cameraName"></param>
</member>
<member name="M:Asa.HIK.IPCamera.GrabOne(System.Drawing.Bitmap[]@)">
<summary>
抓取所有摄像机一张图像
</summary>
<param name="bmp"></param>
</member>
<member name="M:Asa.HIK.IPCamera.GrabOne(System.Int32)">
<summary>
抓取一张图像
</summary>
<param name="cameraIndex">相机索引</param>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.GrabOne(System.Int32,System.Drawing.Bitmap@)">
<summary>
抓取一张图像
</summary>
<param name="cameraIndex">相机索引</param>
<param name="bmp">Bitmap图像</param>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.GrabOne(System.String,System.Drawing.Bitmap@)">
<summary>
抓取一张图像
</summary>
<param name="cameraName">相机名称</param>
<param name="bmp">Bitmap图像</param>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.GrabOne(System.Int32,System.Byte[]@,System.Drawing.Imaging.PixelFormat@)">
<summary>
抓取一张图像字节
</summary>
<param name="cameraIndex">相机索引</param>
<param name="buff">图像字节数组</param>
<param name="format"></param>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.GrabOne(System.Int32,System.IntPtr@,System.Drawing.Imaging.PixelFormat@)">
<summary>
抓取一张图像指针
</summary>
<param name="cameraIndex"></param>
<param name="handle"></param>
<param name="format"></param>
<returns></returns>
</member>
<member name="M:Asa.HIK.IPCamera.PreviewImage(System.String,System.IntPtr)">
<summary>
预览图像
</summary>
<param name="cameraName"></param>
<param name="handle"></param>
<returns></returns>
</member>
<member name="T:Asa.HIK.VisionCamera">
<summary>
机器视觉面阵相机
</summary>
</member>
<member name="M:Asa.HIK.VisionCamera.#ctor">
<summary>
机器视觉面阵相机
</summary>
</member>
<member name="P:Asa.HIK.VisionCamera.Name">
<summary>
相机名称
</summary>
</member>
<member name="P:Asa.HIK.VisionCamera.Count">
<summary>
相机总数
</summary>
</member>
<member name="P:Asa.HIK.VisionCamera.IsOpen">
<summary>
相机是否打开
</summary>
</member>
<member name="P:Asa.HIK.VisionCamera.Size">
<summary>
图像分辨率
</summary>
</member>
<member name="P:Asa.HIK.VisionCamera.Image">
<summary>
相机获取到的图像
</summary>
</member>
<member name="M:Asa.HIK.VisionCamera.Load">
<summary>
加载
</summary>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.Dispose">
<summary>
释放所有
</summary>
</member>
<member name="M:Asa.HIK.VisionCamera.OpenAll">
<summary>
打开所有相机
</summary>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.CloseAll">
<summary>
关闭所有相机
</summary>
</member>
<member name="M:Asa.HIK.VisionCamera.Open(System.Int32)">
<summary>
打开相机
</summary>
<param name="cameraIndex"></param>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.Open(System.String)">
<summary>
打开相机
</summary>
<param name="cameraName"></param>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.Close(System.Int32)">
<summary>
关闭相机
</summary>
<param name="cameraIndex"></param>
</member>
<member name="M:Asa.HIK.VisionCamera.Close(System.String)">
<summary>
关闭相机
</summary>
<param name="cameraName"></param>
</member>
<member name="M:Asa.HIK.VisionCamera.GrabOne(System.Drawing.Bitmap[]@)">
<summary>
抓取所有相机一张图像
</summary>
<param name="bmp"></param>
</member>
<member name="M:Asa.HIK.VisionCamera.GrabOne(System.Int32)">
<summary>
抓取一张图像
</summary>
<param name="cameraIndex">相机索引</param>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.GrabOne(System.Int32,System.Drawing.Bitmap@)">
<summary>
抓取一张图像
</summary>
<param name="cameraIndex">相机索引</param>
<param name="bmp">Bitmap图像</param>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.GrabOne(System.String,System.Drawing.Bitmap@)">
<summary>
抓取一张图像
</summary>
<param name="cameraName">相机名称</param>
<param name="bmp">Bitmap图像</param>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.GrabOne(System.Int32,System.Byte[]@,System.Drawing.Imaging.PixelFormat@)">
<summary>
抓取一张图像字节
</summary>
<param name="cameraIndex">相机索引</param>
<param name="buff">图像字节数组</param>
<param name="format"></param>
<returns></returns>
</member>
<member name="M:Asa.HIK.VisionCamera.GrabOne(System.Int32,System.IntPtr@,System.Drawing.Imaging.PixelFormat@)">
<summary>
抓取一张图像指针
</summary>
<param name="cameraIndex"></param>
<param name="handle"></param>
<param name="format"></param>
<returns></returns>
</member>
<member name="T:Asa.Basler.VisionCamera">
<summary>
机器视觉面阵相机
</summary>
</member>
<member name="F:Asa.Basler.VisionCamera.cameraCurr">
<summary>
当前相机
</summary>
</member>
<member name="F:Asa.Basler.VisionCamera.cameraAll">
<summary>
所有相机列表
</summary>
</member>
<member name="F:Asa.Basler.VisionCamera.cameraName">
<summary>
所有相机的名称
</summary>
</member>
<member name="M:Asa.Basler.VisionCamera.#ctor">
<summary>
机器视觉面阵相机
</summary>
</member>
<member name="P:Asa.Basler.VisionCamera.Name">
<summary>
相机名称
</summary>
</member>
<member name="P:Asa.Basler.VisionCamera.Count">
<summary>
相机总数
</summary>
</member>
<member name="P:Asa.Basler.VisionCamera.IsOpen">
<summary>
相机是否打开
</summary>
</member>
<member name="P:Asa.Basler.VisionCamera.Size">
<summary>
图像分辨率
</summary>
</member>
<member name="P:Asa.Basler.VisionCamera.Image">
<summary>
相机获取到的图像
</summary>
</member>
<member name="M:Asa.Basler.VisionCamera.Load">
<summary>
加载
</summary>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.Dispose">
<summary>
释放所有
</summary>
</member>
<member name="M:Asa.Basler.VisionCamera.OpenAll">
<summary>
打开所有摄像机
</summary>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.CloseAll">
<summary>
关闭所有摄像机
</summary>
</member>
<member name="M:Asa.Basler.VisionCamera.Open(System.Int32)">
<summary>
打开摄像机
</summary>
<param name="cameraIndex"></param>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.Open(System.String)">
<summary>
打开相机
</summary>
<param name="cameraName"></param>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.Close(System.Int32)">
<summary>
关闭摄像机
</summary>
<param name="cameraIndex"></param>
</member>
<member name="M:Asa.Basler.VisionCamera.Close(System.String)">
<summary>
关闭摄像机
</summary>
<param name="cameraName"></param>
</member>
<member name="M:Asa.Basler.VisionCamera.GrabOne(System.Drawing.Bitmap[]@)">
<summary>
抓取所有摄像机一张图像
</summary>
<param name="bmp"></param>
</member>
<member name="M:Asa.Basler.VisionCamera.GrabOne(System.Int32)">
<summary>
抓取一张图像
</summary>
<param name="cameraIndex">相机索引</param>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.GrabOne(System.Int32,System.Drawing.Bitmap@)">
<summary>
抓取一张图像
</summary>
<param name="cameraIndex">相机索引</param>
<param name="bmp">Bitmap图像</param>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.GrabOne(System.String,System.Drawing.Bitmap@)">
<summary>
抓取一张图像
</summary>
<param name="cameraName">相机名称</param>
<param name="bmp">Bitmap图像</param>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.GrabOne(System.Int32,System.Byte[]@,System.Drawing.Imaging.PixelFormat@)">
<summary>
抓取一张图像字节
</summary>
<param name="cameraIndex">相机索引</param>
<param name="buff">图像字节数组</param>
<param name="format"></param>
<returns></returns>
</member>
<member name="M:Asa.Basler.VisionCamera.GrabOne(System.Int32,System.IntPtr@,System.Drawing.Imaging.PixelFormat@)">
<summary>
抓取一张图像指针
</summary>
<param name="cameraIndex"></param>
<param name="handle"></param>
<param name="format"></param>
<returns></returns>
</member>
<member name="T:Asa.Region.Feature">
<summary>
区域特征
</summary>
</member>
<member name="M:Asa.Region.Feature.#ctor(System.Collections.Generic.List{System.String},System.Collections.Generic.List{CameraVisionLib.Model.RegionAPI.EyemRegion})">
<summary>
区域特征
</summary>
<param name="name"></param>
<param name="regions"></param>
</member>
<member name="M:Asa.Region.Feature.OriginalImage(System.Drawing.Bitmap)">
<summary>
原始图像
</summary>
<param name="image"></param>
<returns></returns>
</member>
<member name="M:Asa.Region.Feature.CompareImage(System.Drawing.Bitmap,System.Collections.Generic.Dictionary{System.String,System.Boolean}@)">
<summary>
比较图像
</summary>
<param name="image"></param>
<param name="exist"></param>
<returns></returns>
</member>
<member name="M:Asa.Region.Feature.CompareImage(System.Drawing.Bitmap,System.Collections.Generic.Dictionary{System.String,System.Boolean}@,System.Drawing.Bitmap@)">
<summary>
比较图像
</summary>
<param name="image"></param>
<param name="exist"></param>
<param name="dspImage"></param>
<returns></returns>
</member>
<member name="M:Asa.Region.Feature.CompareImage(System.IntPtr,System.Drawing.Imaging.PixelFormat,System.Collections.Generic.Dictionary{System.String,System.Boolean}@,System.Drawing.Bitmap@)">
<summary>
比较图像
</summary>
<param name="bmpPtr"></param>
<param name="format"></param>
<param name="exist"></param>
<param name="dspImage"></param>
<returns></returns>
</member>
<member name="M:Asa.Region.Feature.CompareSingleImage(System.Drawing.Bitmap,System.Collections.Generic.Dictionary{System.String,System.Boolean}@)">
<summary>
比较单张图像，没有原图
</summary>
<param name="image"></param>
<param name="exist"></param>
<returns></returns>
</member>
</members>
</doc>
DLL/CodeLibrary.dll 0 → 100644
此文件类型无法预览
DLL/ConfigHelper.dll 0 → 100644
此文件类型无法预览
DLL/ConfigHelper.xml 0 → 100644
<?xml version="1.0"?>
<doc>
<assembly>
<name>ConfigHelper</name>
</assembly>
<members>
<member name="F:ConfigHelper.AdvanceConfigEdit.CustomEditor">
<summary>
自定义编辑器
</summary>
</member>
<member name="F:ConfigHelper.AdvanceConfigEdit.components">
<summary>
必需的设计器变量。
</summary>
</member>
<member name="M:ConfigHelper.AdvanceConfigEdit.Dispose(System.Boolean)">
<summary>
清理所有正在使用的资源。
</summary>
<param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
</member>
<member name="M:ConfigHelper.AdvanceConfigEdit.InitializeComponent">
<summary>
设计器支持所需的方法 - 不要修改
使用代码编辑器修改此方法的内容。
</summary>
</member>
<member name="M:ConfigHelper.AdvanceConfigForm.AddCustomEditor``1(System.String)">
<summary>
添加自定义编辑器
</summary>
<typeparam name="T"></typeparam>
<param name="name"></param>
</member>
<member name="M:ConfigHelper.AdvanceConfigForm.ShowEditDialog(System.Windows.Forms.IWin32Window,System.Boolean)">
<summary>
显示配置界面,2秒内调用约6次后显示
</summary>
<param name="owner"></param>
<param name="TopMost"></param>
</member>
<member name="F:ConfigHelper.AdvanceConfigForm.components">
<summary>
Required designer variable.
</summary>
</member>
<member name="M:ConfigHelper.AdvanceConfigForm.Dispose(System.Boolean)">
<summary>
Clean up any resources being used.
</summary>
<param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
</member>
<member name="M:ConfigHelper.AdvanceConfigForm.InitializeComponent">
<summary>
Required method for Designer support - do not modify
the contents of this method with the code editor.
</summary>
</member>
<member name="T:ConfigHelper.Config">
<summary>
自定义配置存取
</summary>
</member>
<member name="F:ConfigHelper.Config.hasChange">
<summary>
指示配置文件是否存在变化
</summary>
</member>
<member name="P:ConfigHelper.Config.SaveToAppdata">
<summary>
将设置保存至appdata目录
</summary>
</member>
<member name="M:ConfigHelper.Config.ReloadConfig">
<summary>
重载配置
</summary>
</member>
<member name="M:ConfigHelper.Config.SetComment(System.String,System.String)">
<summary>
设置备注
</summary>
<param name="key"></param>
<param name="Comment"></param>
</member>
<member name="M:ConfigHelper.Config.Get(System.String)">
<summary>
读取配置
</summary>
<param name="key"></param>
<returns></returns>
</member>
<member name="M:ConfigHelper.Config.Get(System.Object)">
<summary>
读取配置
</summary>
<param name="key">传入一个枚举值</param>
<returns></returns>
</member>
<member name="M:ConfigHelper.Config.Get``1(System.Object,``0)">
<summary>
读取配置
</summary>
<typeparam name="T">返回类型</typeparam>
<param name="key">传入一个枚举值</param>
<param name="defaultvalue">失败默认值</param>
<returns></returns>
</member>
<member name="M:ConfigHelper.Config.Get``1(System.String,``0)">
<summary>
读取配置
</summary>
<typeparam name="T">返回类型</typeparam>
<param name="key">key</param>
<param name="defaultvalue">失败默认值</param>
<returns></returns>
</member>
<member name="M:ConfigHelper.Config.Set(System.String,System.String)">
<summary>
设置配置
</summary>
<param name="key"></param>
<param name="value"></param>
</member>
<member name="M:ConfigHelper.Config.Set(System.Object,System.String)">
<summary>
设置配置
</summary>
<param name="key">配置枚举值</param>
<param name="value"></param>
</member>
<member name="M:ConfigHelper.Config.Set``1(System.Object,``0)">
<summary>
设置配置
</summary>
<param name="key">配置枚举值</param>
<param name="value"></param>
</member>
<member name="M:ConfigHelper.Config.Set``1(System.String,``0)">
<summary>
设置配置
</summary>
<typeparam name="T">值类型</typeparam>
<param name="key"></param>
<param name="value"></param>
</member>
<member name="M:ConfigHelper.Config.SaveChangeDebounce">
<summary>
保存设置
</summary>
</member>
<member name="M:ConfigHelper.Config.SaveChange">
<summary>
保存设置
</summary>
</member>
<member name="M:ConfigHelper.Config.PropertyBind(System.Object,System.Object,System.String,System.String,System.String)">
<summary>
绑定UI属性
</summary>
<param name="key">配置key</param>
<param name="uiobj">ui对象</param>
<param name="Property">绑定属性</param>
<param name="SaveEvent">绑定事件(object s, EventArgs x),可以为空</param>
<param name="defaultvalue">默认值</param>
</member>
<member name="M:ConfigHelper.Config.PropertyBind``1(System.Object,System.Object,System.String,System.String,``0)">
<summary>
绑定UI属性
</summary>
<param name="key">配置key</param>
<param name="uiobj">ui对象</param>
<param name="Property">绑定属性</param>
<param name="SaveEvent">绑定事件(object s, EventArgs x),可以为空</param>
<param name="defaultvalue">默认值</param>
</member>
<member name="M:ConfigHelper.Config.LoadMyConfig(System.Type)">
<summary>
转换自定义配置类
</summary>
<param name="ConfigClassType"></param>
<returns>加载到的配置Key数量</returns>
</member>
<member name="T:ConfigHelper.ICustEditor">
<summary>
自定义编辑器接口
</summary>
</member>
<member name="M:ConfigHelper.ICustEditor.ValueEdit(System.Object)">
<summary>
自己的编辑方法或界面
</summary>
<param name="value">传入的值</param>
<returns>传出的值</returns>
</member>
<member name="T:ConfigHelper.MyConfig`1">
<summary>
自动化我的配置
</summary>
</member>
<member name="F:ConfigHelper.MyConfig`1.Key">
<summary>
配置的Key
</summary>
</member>
<member name="P:ConfigHelper.MyConfig`1.Val">
<summary>
配置的值
</summary>
</member>
<member name="M:ConfigHelper.MyConfig`1.ToString">
<summary>
获取配置数据的文本
</summary>
<returns></returns>
</member>
<member name="M:ConfigHelper.MyConfig`1.op_Implicit(ConfigHelper.MyConfig{`0})~`0">
<summary>
隐式转换,读值
</summary>
<param name="m1"></param>
</member>
<member name="M:ConfigHelper.MyConfig`1.op_Implicit(`0)~ConfigHelper.MyConfig{`0}">
<summary>
隐式转换,写值
</summary>
<param name="v1"></param>
</member>
<member name="T:ConfigHelper.MyConfigComment">
<summary>
自定义配置描述
</summary>
</member>
<member name="M:ConfigHelper.MyConfigComment.#ctor(System.String)">
<summary>
配置的说明
</summary>
<param name="comment"></param>
</member>
</members>
</doc>
DLL/HuichuanLibrary.dll 0 → 100644
此文件类型无法预览
DLL/HuichuanLibrary.xml 0 → 100644
<?xml version="1.0"?>
<doc>
<assembly>
<name>HuichuanLibrary</name>
</assembly>
<members>
<member name="F:HuichuanLibrary.FrmHuiChuanTest.components">
<summary>
Required designer variable.
</summary>
</member>
<member name="M:HuichuanLibrary.FrmHuiChuanTest.Dispose(System.Boolean)">
<summary>
Clean up any resources being used.
</summary>
<param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
</member>
<member name="M:HuichuanLibrary.FrmHuiChuanTest.InitializeComponent">
<summary>
Required method for Designer support - do not modify
the contents of this method with the code editor.
</summary>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.InitConfig(System.String,System.String,System.String)">
<summary>
初始化配置信息，初始化板卡之前，先初始化配置
</summary>
<param name="deviceConfigPath"></param>
<param name="systemConfigPath"></param>
<param name="logName"></param>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.OpenCard">
<summary>
初始化板卡
</summary>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.CloseCard">
<summary>
关闭板卡
</summary>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.CardInitOk(System.Boolean)">
<summary>
板卡是否已经初始化OK
</summary>
<param name="isShowLog"></param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAdVal(System.Int16)">
<summary>
模拟量IO值获取 获取EtherCAT 第 adNo号的ad值
</summary>
<param name="adNo">ad的通道：0~配置个数</param>
<returns>获取AD的输入值</returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.StartHomeMove(System.Int16,System.UInt32,System.UInt32,System.UInt32,System.Int16,System.Int32,System.UInt32,System.Int16)">
<summary>
开始回零
</summary>
<param name="axisNo">轴号</param>
<param name="highVel">回零高速</param>
<param name="lowVel">回零低速</param>
<param name="acc">回零加速度</param>
<param name="homeMethod">回零方法，默认28</param>
<param name="offset">回零偏移，默认0</param>
<param name="overtime">超时时间，默认120000</param>
<param name="posSrc">端子板信号源，默认0</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.HomeingIsEnd(System.Int16)">
<summary>
判断回零是否完成
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.IsInPosition(System.Int16,System.Double,System.Double)">
<summary>
判断轴是否在指定的位置
</summary>
<param name="axisNo">轴号</param>
<param name="targetPos">目标位置</param>
<param name="maxError">最大误差脉冲值</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.SetEcatSdo(System.UInt16,System.Int32,System.Int32)">
<summary>
设置齿轮比
</summary>
<param name="axisNo">轴号</param>
<param name="Motor_Revolution">电子齿轮分子：电机分辨率</param>
<param name="Shaft_Revolution">电子齿轮分母：一圈脉冲数</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.SetSdo(System.UInt16,System.UInt16,System.UInt16,System.Byte[])">
<summary>
写sdo
</summary>
<param name="axisNo">轴号</param>
<param name="index">0x6091</param>
<param name="subindex">0x02</param>
<param name="value">2000</param>
<param name="datasize">4</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisPrfMode(System.Int16)">
<summary>
获取轴规划模式
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisSts(System.Int16)">
<summary>
获取轴状态
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisPrfPos(System.Int16)">
<summary>
获取轴规划位置
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisPrfVel(System.Int16)">
<summary>
获取轴规划速度
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisCurrPos(System.Int16)">
<summary>
获取轴反馈位置
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisCurrVel(System.Int16)">
<summary>
获取轴反馈速度
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisCurrAcc(System.Int16)">
<summary>
获取轴反馈加速度
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.ClearAxisSts(System.Int16)">
<summary>
清楚轴报警状态
</summary>
<param name="axisNo">轴号</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetEcatAxPosTorqLmt(System.Int16)">
<summary>
获取EtherCAT类型轴对应的正向力矩限制
</summary>
<param name="axisNo">轴号0-31</param>
<returns>正向力矩限制</returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.SetEcatAxPosTorqLmt(System.Int16,System.Int16)">
<summary>
设置EtherCAT类型轴对应的正向力矩限制
</summary>
<param name="axisNo">轴号0-31</param>
<param name="value">正向力矩限制</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetEcatAxNegTorqLmt(System.Int16)">
<summary>
获取EtherCAT类型轴对应的负向力矩限制
</summary>
<param name="axisNo">轴号0-31</param>
<returns>负向力矩限制</returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.SetEcatAxNegTorqLmt(System.Int16,System.Int16)">
<summary>
设置EtherCAT类型轴对应的负向力矩限制
</summary>
<param name="axisNo">轴号0-31</param>
<param name="value">负向力矩限制</param>
<returns></returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetEcatAxMaxTorqLmt(System.Int16)">
<summary>
获取EtherCAT类型轴对应的最大力矩限制
</summary>
<param name="axisNo">轴号0-31</param>
<returns>最大力矩限制</returns>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.SetEcatAxMaxTorqLmt(System.Int16,System.Int16)">
<summary>
设置EtherCAT类型轴对应的最大力矩限制
</summary>
<param name="axisNo">轴号0-31</param>
<param name="value">最大力矩限制</param>
<returns></returns>
</member>
<member name="F:HuichuanLibrary.HCBoardManager.HomeSts_Moveing">
<summary>
回原点状态：0=正在回零中
</summary>
</member>
<member name="F:HuichuanLibrary.HCBoardManager.HomeSts_NotStart">
<summary>
回原点状态：1=回零中断或者没有开始启动
</summary>
</member>
<member name="F:HuichuanLibrary.HCBoardManager.HomeSts_OK">
<summary>
回原点状态：3=回零完成
</summary>
</member>
<member name="M:HuichuanLibrary.HCBoardManager.GetAxisErrorDetail(System.Int16)">
<summary>
获取伺服报警错误信息
</summary>
<param name="axisNo"></param>
<returns>[0]错误编号,[1]错误信息,[2]cd[5] ,[3]错误范围,[4],[5]</returns>
</member>
<member name="F:HuichuanLibrary.AxisSts.ALM">
<summary>
轴报警信号
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.WARN">
<summary>
轴警告信号
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.EMG">
<summary>
轴急停信号
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.ServoOn">
<summary>
轴伺服使能信号
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.BUSY">
<summary>
轴忙碌状态
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.INP">
<summary>
轴到位信号
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.PEL">
<summary>
正限位信号
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.ORG">
<summary>
原点信号
</summary>
</member>
<member name="F:HuichuanLibrary.AxisSts.NEL">
<summary>
负限位信号
</summary>
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_GetCardsNum(System.Int32@)">
*==========================================================================*/
*---- FUNCTION DEFINE ---*/
*==========================================================================*/
*==========================================================================*/
*----1.1 板卡的操作以及资源的获取接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_SetEcatGrpDiInverse(System.UInt64,System.Int16,System.Int16)">
*==========================================================================*/
*----1.2.1 ECAT资源设置接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_GetBoardWorkSts(System.UInt64,System.Int16@)">
*==========================================================================*/
*----1.2.2 端子板资源设置接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_GetHwSysPara(System.UInt64,System.Int16@,System.Int16@)">
*==========================================================================*/
*----1.2.3 系统参数设置接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_SetAxActive(System.UInt64,System.Int16,System.Int16)">
*==========================================================================*/
*----1.2.4 轴参数设置接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_GetSlaveCurSts(System.UInt64,System.UInt16,System.UInt16,System.Int16[])">
*==========================================================================*/
*----2.1 ECAT硬件操作接口 ---*/
*==========================================================================*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----2.1.1ECAT总线 SDO操作以及状态查询 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_SetLocalDoBit(System.UInt64,System.Int16,System.Int16)">
*==========================================================================*/
*----2.2 端子板硬件操作接口 ---*/
*==========================================================================*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----2.2.1 DIO操作接口 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_GetLocalCntPos(System.UInt64,System.Int16,System.Int32[],System.Int16)">
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----2.2.2 编码器操作接口 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_CompareSrcConfig(System.UInt64,System.Int16,System.Int16,System.Int16[],System.Int16[])">
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----2.2.4 位置比较输出操作接口 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_StartHoming(System.UInt64,System.Int16,HuichuanLibrary.ImcApi.THomingPara@)">
*==========================================================================*/
*----3 回零操作接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_GetAxPrfMode(System.UInt64,System.Int16,System.Int16[],System.Int16)">
*==========================================================================*/
*----4 状态管理接口 ---*/
*==========================================================================*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----4.2 轴状态管理接口 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_SetAxCaptMode(System.UInt64,System.Int16,System.Int16,System.Int16,System.Int16)">
*==========================================================================*/
*----5 数据采集接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_SetSingleAxMvPara(System.UInt64,System.Int16,System.Double,System.Double,System.Double)">
*==========================================================================*/
*----7 运动模式接口 ---*/
*==========================================================================*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_StartPtpMove(System.UInt64,System.Int16,System.Double,System.Int16)">
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----7.1 PTP点位模式接口 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_StartJogMove(System.UInt64,System.Int16,System.Double)">
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----7.2 Jog运动模式接口 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
<member name="M:HuichuanLibrary.ImcApi.IMC_EnterHandWheelMode(System.UInt64,System.Int16,System.Int16,System.Int16,System.Double,System.Double,System.Double)">
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
*----7.3 手轮跟随运动模式接口 ---*/
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
</member>
</members>
</doc>
DeviceLibrary/DeviceLibrary.csproj
...@@ -32,30 +32,28 @@ ...@@ -32,30 +32,28 @@
<WarningLevel>4</WarningLevel> <WarningLevel>4</WarningLevel>
</PropertyGroup> </PropertyGroup>
<ItemGroup> <ItemGroup>
<Reference Include="Asa.Camera.VisionLib"> <Reference Include="Asa.Camera.VisionLib, Version=1.3.8398.28384, Culture=neutral, processorArchitecture=MSIL">
<HintPath>..\..\Camera\CameraVisionLib\bin\Debug\Asa.Camera.VisionLib.dll</HintPath> <SpecificVersion>False</SpecificVersion>
<HintPath>..\DLL\Asa.Camera.VisionLib.dll</HintPath>
</Reference> </Reference>
<Reference Include="Asa.PrintLabel"> <Reference Include="CodeLibrary, Version=1.0.8384.25672, Culture=neutral, processorArchitecture=MSIL">
<HintPath>..\..\PrintLabel\PrintLabel\bin\Debug\Asa.PrintLabel.dll</HintPath> <SpecificVersion>False</SpecificVersion>
<HintPath>..\DLL\CodeLibrary.dll</HintPath>
</Reference> </Reference>
<Reference Include="CodeLibrary"> <Reference Include="ConfigHelper, Version=1.0.0.2, Culture=neutral, processorArchitecture=MSIL">
<HintPath>..\..\GeneralClassLibrary\CodeLibraryProject\CodeLibrary\bin\Debug\CodeLibrary.dll</HintPath> <SpecificVersion>False</SpecificVersion>
</Reference> <HintPath>..\DLL\ConfigHelper.dll</HintPath>
<Reference Include="ConfigHelper">
<HintPath>..\..\ConfigHelper\ConfigHelper\bin\Debug\ConfigHelper.dll</HintPath>
</Reference> </Reference>
<Reference Include="halcondotnet"> <Reference Include="halcondotnet">
<HintPath>..\..\RC1271-DUOStore\dll\halcondotnet.dll</HintPath> <HintPath>..\..\RC1271-DUOStore\dll\halcondotnet.dll</HintPath>
</Reference> </Reference>
<Reference Include="HuichuanLibrary"> <Reference Include="HuichuanLibrary, Version=1.0.0.0, Culture=neutral, processorArchitecture=MSIL">
<HintPath>..\..\HuichuanLibrary\HuichuanLibrary\bin\Debug\HuichuanLibrary.dll</HintPath> <SpecificVersion>False</SpecificVersion>
<HintPath>..\DLL\HuichuanLibrary.dll</HintPath>
</Reference> </Reference>
<Reference Include="log4net"> <Reference Include="log4net">
<HintPath>..\..\增广夹爪\Rmaxis\bin\Debug\log4net.dll</HintPath> <HintPath>..\..\增广夹爪\Rmaxis\bin\Debug\log4net.dll</HintPath>
</Reference> </Reference>
<Reference Include="Neotel.Rmaxis">
<HintPath>..\..\增广夹爪\Rmaxis\bin\Debug\Neotel.Rmaxis.dll</HintPath>
</Reference>
<Reference Include="System" /> <Reference Include="System" />
<Reference Include="System.Core" /> <Reference Include="System.Core" />
<Reference Include="System.Drawing" /> <Reference Include="System.Drawing" />
...@@ -161,5 +159,8 @@ ...@@ -161,5 +159,8 @@
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory> <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</None> </None>
</ItemGroup> </ItemGroup>
<ItemGroup>
<WCFMetadata Include="Connected Services\" />
</ItemGroup>
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
</Project> </Project>
\ No newline at end of file \ No newline at end of file
TheMachine/TheMachine.csproj
...@@ -41,25 +41,19 @@ ...@@ -41,25 +41,19 @@
<ApplicationManifest>app.manifest</ApplicationManifest> <ApplicationManifest>app.manifest</ApplicationManifest>
</PropertyGroup> </PropertyGroup>
<ItemGroup> <ItemGroup>
<Reference Include="Asa.PrintLabel, Version=1.0.0.0, Culture=neutral, processorArchitecture=MSIL"> <Reference Include="CodeLibrary, Version=1.0.8384.25672, Culture=neutral, processorArchitecture=MSIL">
<SpecificVersion>False</SpecificVersion> <SpecificVersion>False</SpecificVersion>
<HintPath>..\..\PrintLabel\PrintLabel\bin\Debug\Asa.PrintLabel.dll</HintPath> <HintPath>..\DLL\CodeLibrary.dll</HintPath>
</Reference> </Reference>
<Reference Include="CodeLibrary, Version=1.0.7703.30209, Culture=neutral, processorArchitecture=MSIL"> <Reference Include="ConfigHelper, Version=1.0.0.2, Culture=neutral, processorArchitecture=MSIL">
<SpecificVersion>False</SpecificVersion> <SpecificVersion>False</SpecificVersion>
<HintPath>..\..\GeneralClassLibrary\CodeLibraryProject\CodeLibrary\bin\Debug\CodeLibrary.dll</HintPath> <HintPath>..\DLL\ConfigHelper.dll</HintPath>
</Reference>
<Reference Include="ConfigHelper">
<HintPath>..\..\ConfigHelper\ConfigHelper\bin\Debug\ConfigHelper.dll</HintPath>
</Reference> </Reference>
<Reference Include="halcondotnet, Version=12.0.0.0, Culture=neutral, PublicKeyToken=4973bed59ddbf2b8" /> <Reference Include="halcondotnet, Version=12.0.0.0, Culture=neutral, PublicKeyToken=4973bed59ddbf2b8" />
<Reference Include="log4net, Version=2.0.12.0, Culture=neutral, PublicKeyToken=669e0ddf0bb1aa2a, processorArchitecture=MSIL"> <Reference Include="log4net, Version=2.0.12.0, Culture=neutral, PublicKeyToken=669e0ddf0bb1aa2a, processorArchitecture=MSIL">
<SpecificVersion>False</SpecificVersion> <SpecificVersion>False</SpecificVersion>
<HintPath>..\..\增广夹爪\Rmaxis\bin\Debug\log4net.dll</HintPath> <HintPath>..\..\增广夹爪\Rmaxis\bin\Debug\log4net.dll</HintPath>
</Reference> </Reference>
<Reference Include="Neotel.Rmaxis">
<HintPath>..\..\增广夹爪\Rmaxis\bin\Debug\Neotel.Rmaxis.dll</HintPath>
</Reference>
<Reference Include="System" /> <Reference Include="System" />
<Reference Include="System.Core" /> <Reference Include="System.Core" />
<Reference Include="System.Xml.Linq" /> <Reference Include="System.Xml.Linq" />
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!