using log4net;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Reflection;
using System.Text;
using System.Threading.Tasks;

namespace OnlineStore.LoadCSVLibrary
{
   
    public class BoxEquip_Config : DeviceConfig
    {
        public BoxEquip_Config()
            : base()
        {
        }
        public BoxEquip_Config(int id, string cid, string type, string filepath)
            : base(id, cid, LoadCSVLibrary.DeviceType.BoxEquip, filepath)
        {
        }
        /// <summary>
        /// 出入库一定次数后复位
        /// </summary>
        [ConfigProAttribute("Box_ResetCount")]
        public int Box_ResetCount { get; set; }
        #region 轴
        /// <summary>
        ///  AXIS,0,行走机构,MoveAxis,0,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("MoveAxis")]
        public ConfigMoveAxis MoveAxis { get; set; }
        /// <summary>
        ///  AXIS,0,料斗拉取进出轴,PullAxis_Inout,1,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout")]
        public ConfigMoveAxis PullAxis_Inout { get; set; }
        /// <summary>
        ///  AXIS,0,移栽升降轴,UpdownAxis,2,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("UpdownAxis")]
        public ConfigMoveAxis UpdownAxis { get; set; }
        /// <summary>
        ///  AXIS,0,A面移栽X轴,XAxis_A,3,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("XAxis_A")]
        public ConfigMoveAxis XAxis_A { get; set; }
        /// <summary>
        ///  AXIS,0,A面移栽旋转轴,MiddleAxis_A,4,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("MiddleAxis_A")]
        public ConfigMoveAxis MiddleAxis_A { get; set; }
        /// <summary>
        ///  AXIS,0,A面移栽压紧轴,ComAxis_A,5,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("ComAxis_A")]
        public ConfigMoveAxis ComAxis_A { get; set; }
        /// <summary>
        ///  AXIS,0,料斗拉取升降轴,PullAxis_Updown,6,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown")]
        public ConfigMoveAxis PullAxis_Updown { get; set; }
        /// <summary>
        ///  AXIS,0,B面移栽X轴,XAxis_B,7,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("XAxis_B")]
        public ConfigMoveAxis XAxis_B { get; set; }
        /// <summary>
        ///  AXIS,0,B面移栽旋转轴,MiddleAxis_B,8,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("MiddleAxis_B")]
        public ConfigMoveAxis MiddleAxis_B { get; set; }
        /// <summary>
        ///  AXIS,0,B面移栽压紧轴,ComAxis_B,9,HC,,35000,60000,60000,1000,5000,20000,10,100,0,0
        /// </summary>
        [ConfigProAttribute("ComAxis_B")]
        public ConfigMoveAxis ComAxis_B { get; set; }
        #endregion
        /// <summary>
        ///  A面抽屉对位Mark_X坐标
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_A_X")]
        public float FindPos_Drawer_A_X { get; set; }
        /// <summary>
        ///  A面抽屉对位Mark_Y坐标
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_A_Y")]
        public float FindPos_Drawer_A_Y { get; set; }

        /// <summary>
        ///  A面抽屉对位Mark_X坐标
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_A_X")]
        public float Validate_Drawer_A_X { get; set; }
        /// <summary>
        ///  A面抽屉对位Mark_Y坐标
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_A_Y")]
        public float Validate_Drawer_A_Y { get; set; }

        /// <summary>
        ///  A面X方向像素到脉冲的系数
        /// </summary>
        [ConfigProAttribute("PixelToPulse_A_X")]
        public float PixelToPulse_A_X { get; set; }
        /// <summary>
        ///  A面Y方向像素到脉冲的系数
        /// </summary>
        [ConfigProAttribute("PixelToPulse_A_Y")]
        public float PixelToPulse_A_Y { get; set; }

        /// <summary>
        ///  B面抽屉对位Mark_X坐标
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_B_X")]
        public float FindPos_Drawer_B_X { get; set; }
        /// <summary>
        ///  B面抽屉对位Mark_Y坐标
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_B_Y")]
        public float FindPos_Drawer_B_Y { get; set; }

        /// <summary>
        ///  B面抽屉对位Mark_X坐标
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_B_X")]
        public float Validate_Drawer_B_X { get; set; }
        /// <summary>
        ///  B面抽屉对位Mark_Y坐标
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_B_Y")]
        public float Validate_Drawer_B_Y { get; set; }

        /// <summary>
        ///  B面X方向像素到脉冲的系数
        /// </summary>
        [ConfigProAttribute("PixelToPulse_B_X")]
        public float PixelToPulse_B_X { get; set; }
        /// <summary>
        ///  B面Y方向像素到脉冲的系数
        /// </summary>
        [ConfigProAttribute("PixelToPulse_B_Y")]
        public float PixelToPulse_B_Y { get; set; }


        /// <summary>
        /// 抽屉Mark_X方向误差范围
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_X_Error")]
        public float FindPos_Drawer_X_Error { get; set; }
        /// <summary>
        /// 抽屉Mark_Y方向误差范围
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_Y_Error")]
        public float FindPos_Drawer_Y_Error { get; set; }
        /// <summary>
        /// 验证抽屉Mark_X方向误差范围
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_X_Error")]
        public float Validate_Drawer_X_Error { get; set; }
        /// <summary>
        /// 验证抽屉Mark_Y方向误差范围
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_Y_Error")]
        public float Validate_Drawer_Y_Error { get; set; }
        /// <summary>
        /// A面抽屉对位Mark面积
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_A_Area")]
        public float FindPos_Drawer_A_Area { get; set; }
        /// <summary>
        /// A面抽屉验证Mark面积
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_A_Area")]
        public float Validate_Drawer_A_Area { get; set; }
        /// <summary>
        /// B面抽屉对位Mark面积
        /// </summary>
        [ConfigProAttribute("FindPos_Drawer_B_Area")]
        public float FindPos_Drawer_B_Area { get; set; }
        /// <summary>
        /// B面抽屉验证Mark面积
        /// </summary>
        [ConfigProAttribute("Validate_Drawer_B_Area")]
        public float Validate_Drawer_B_Area { get; set; }

        /// <summary>
        /// 抽屉行间距
        /// </summary>
        [ConfigProAttribute("Row_Spacing")]
        public int Row_Spacing { get; set; }
        /// <summary>
        /// 抽屉列间距
        /// </summary>
        [ConfigProAttribute("Column_Spacing")]
        public int Column_Spacing { get; set; }
        /// <summary>
        /// 抽屉行数
        /// </summary>
        [ConfigProAttribute("Drawer_Rows")]
        public int Drawer_Rows { get; set; }
        /// <summary>
        /// 抽屉列数
        /// </summary>
        [ConfigProAttribute("Drawer_Columns")]
        public int Drawer_Columns { get; set; }
        /// <summary>
        /// 抽屉内行数
        /// </summary>
        [ConfigProAttribute("Rows_In_Drawer")]
        public int Rows_In_Drawer { get; set; }
        /// <summary>
        /// 抽屉内列数
        /// </summary>
        [ConfigProAttribute("Cols_In_Drawer")]
        public int Cols_In_Drawer { get; set; }

        /// <summary>
        /// 行走机构调试速度
        /// </summary>
        [ConfigProAttribute("MoveAxis_FindPosSpeed")]
        public int MoveAxis_FindPosSpeed { get; set; }
        /// <summary>
        /// 行走机构正极限位置
        /// </summary>
        [ConfigProAttribute("MoveAxis_PosLimit")]
        public int MoveAxis_PosLimit { get; set; }
        /// <summary>
        /// 行走机构负极限位置
        /// </summary>
        [ConfigProAttribute("MoveAxis_NegLimit")]
        public int MoveAxis_NegLimit { get; set; }

        /// <summary>
        /// 升降轴调试速度
        /// </summary>
        [ConfigProAttribute("UpdownAxis_FindPosSpeed")]
        public int UpdownAxis_FindPosSpeed { get; set; }
        /// <summary>
        /// 升降轴正极限位置
        /// </summary>
        [ConfigProAttribute("UpdownAxis_PosLimit")]
        public int UpdownAxis_PosLimit { get; set; }
        /// <summary>
        /// 升降轴负极限位置
        /// </summary>
        [ConfigProAttribute("UpdownAxis_NegLimit")]
        public int UpdownAxis_NegLimit { get; set; }
        /// <summary>
        /// 拉取升降轴调试速度
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_FindPosSpeed")]
        public int PullAxis_Updown_FindPosSpeed { get; set; }

        /// <summary>
        /// 拉取进出轴调试速度
        /// </summary>
        [ConfigProAttribute("PullAxis_InOut_FindPosSpeed")]
        public int PullAxis_InOut_FindPosSpeed { get; set; }
        /// <summary>
        /// 轴调试速度
        /// </summary>
        [ConfigProAttribute("XAxis_FindPosSpeed")]
        public int XAxis_FindPosSpeed { get; set; }
        /// <summary>
        /// 压紧轴调试速度
        /// </summary>
        [ConfigProAttribute("ComAxis_FindPosSpeed")]
        public int ComAxis_FindPosSpeed { get; set; }


        /// <summary>
        /// 拉取升降轴正极限位置
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_PosLimit")]
        public int PullAxis_Updown_PosLimit { get; set; }
        /// <summary>
        /// 拉取升降轴负极限位置
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_NegLimit")]
        public int PullAxis_Updown_NegLimit { get; set; }
        /// <summary>
        /// 抓手检测得分阈值
        /// </summary>
        [ConfigProAttribute("TongsDetectThreshold")]
        public float TongsDetectThreshold { get; set; }
        /// <summary>
        ///  PRO,0,设备是否处于调试状态（1=调试，0=正常）,IsDebug,0,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("IsDebug")]
        public int IsDebug { get; set; }

        #region 轴移动点位信息
        /// <summary>
        ///  PRO,0,行走机构_待机点P1,MoveAxis_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MoveAxis_P1")]
        public int MoveAxis_P1 { get; set; }

        /// <summary>
        ///  PRO,0,行走机构_进出料机构取放点位P2,MoveAxis_P2,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MoveAxis_P2")]
        public int MoveAxis_P2 { get; set; }

        /// <summary>
        /// PRO,0,行走机构_安全位置,MoveAxis_SafePos,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MoveAxis_SafePos")]
        public int MoveAxis_SafePos { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取进出轴_待机点P1,PullAxis_Inout_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_P1")]
        public int PullAxis_Inout_P1 { get; set; }
        

                    /// <summary>
        /// PRO,0,A面料屉拉取进出轴_拍照点,PullAxis_Inout_CamA,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_CamA")]
        public int PullAxis_Inout_CamA { get; set; }
        /// <summary>
        /// PRO,0,B面料屉拉取进出轴_拍照点,PullAxis_Inout_CamB,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_CamB")]
        public int PullAxis_Inout_CamB { get; set; }
        /// <summary>
        ///  PRO,0,移栽升降轴_待机点P1,Updown_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P1")]
        public int Updown_P1 { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_A上暂存区取料高点P2,Updown_P2,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P2")]
        public int Updown_P2 { get; set; }

        /// <summary>
        /// PRO,0,移栽升降轴_A上暂存区取料低点P3,Updown_P3,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P3")]
        public int Updown_P3 { get; set; }

        /// <summary>
        /// PRO,0,移栽升降轴_A下暂存区放料高点P4,Updown_P4,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P4")]
        public int Updown_P4 { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_A下暂存区放料低点P5,Updown_P5,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P5")]
        public int Updown_P5 { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_B上暂存区取料高点P8,Updown_P8,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P8")]
        public int Updown_P8 { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_B上暂存区取料低点P9,Updown_P9,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P9")]
        public int Updown_P9 { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_B下暂存区取料高点P10,Updown_P10,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P10")]
        public int Updown_P10 { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_B下暂存区取料低点P11,Updown_P11,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P11")]
        public int Updown_P11 { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取升降轴_待机点P1,PullAxis_Updown_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_P1")]
        public int PullAxis_Updown_P1 { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽X轴_待机点P1,XAxis_A_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_A_P1")]
        public int XAxis_A_P1 { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽X轴_A进出料暂存区取放料点P2,XAxis_A_P2,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_A_P2")]
        public int XAxis_A_P2 { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽旋转轴_待机点P1,MiddleAxis_A_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_A_P1")]
        public int MiddleAxis_A_P1 { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽旋转轴_A进出料暂存区取放料水平点P2,MiddleAxis_A_P2,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_A_P2")]
        public int MiddleAxis_A_P2 { get; set; }

        /// <summary>
        /// PRO,0,A面移栽旋转轴_A面料屉库位垂直取放料点P3,MiddleAxis_A_P3,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_A_P3")]
        public int MiddleAxis_A_P3 { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽压紧轴_待机点P1,ComAxis_A_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_A_P1")]
        public int ComAxis_A_P1 { get; set; }
        /// <summary>
        ///  PRO,0,B面移栽X轴_待机点P1,XAxis_B_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_B_P1")]
        public int XAxis_B_P1 { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽X轴_B进出料暂存区取放料点P2,XAxis_B_P2,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_B_P2")]
        public int XAxis_B_P2 { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽旋转轴_待机点P1,MiddleAxis_B_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_B_P1")]
        public int MiddleAxis_B_P1 { get; set; }

        /// <summary>
        /// PRO,0,B面移栽旋转轴_B进出料暂存区取放料水平点P2,MiddleAxis_B_P2,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_B_P2")]
        public int MiddleAxis_B_P2 { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽旋转轴_B面料屉库位垂直取放料点P3,MiddleAxis_B_P3,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_B_P3")]
        public int MiddleAxis_B_P3 { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽压紧轴_待机点P1,ComAxis_B_P1,100,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_B_P1")]
        public int ComAxis_B_P1 { get; set; }

        #endregion

        #region 轴移动速度信息

        /// <summary>
        ///  PRO,0,行走机构_P1速度,MoveAxis_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MoveAxis_P1_Speed")]
        public int MoveAxis_P1_Speed { get; set; }

        /// <summary>
        /// PRO,0,行走机构_P2速度,MoveAxis_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MoveAxis_P2_Speed")]
        public int MoveAxis_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,行走机构_P3速度,MoveAxis_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MoveAxis_P3_Speed")]
        public int MoveAxis_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取进出轴_P1速度,PullAxis_Inout_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_P1_Speed")]
        public int PullAxis_Inout_P1_Speed { get; set; }

        /// <summary>
        /// PRO,0,料斗拉取进出轴_P2速度,PullAxis_Inout_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_P2_Speed")]
        public int PullAxis_Inout_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取进出轴_P3速度,PullAxis_Inout_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_P3_Speed")]
        public int PullAxis_Inout_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取进出轴_P4速度,PullAxis_Inout_P4_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_P4_Speed")]
        public int PullAxis_Inout_P4_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取进出轴_P5速度,PullAxis_Inout_P5_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Inout_P5_Speed")]
        public int PullAxis_Inout_P5_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P1速度,Updown_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P1_Speed")]
        public int Updown_P1_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P2速度,Updown_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P2_Speed")]
        public int Updown_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P3速度,Updown_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P3_Speed")]
        public int Updown_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P4速度,Updown_P4_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P4_Speed")]
        public int Updown_P4_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P5速度,Updown_P5_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P5_Speed")]
        public int Updown_P5_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P6速度,Updown_P6_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P6_Speed")]
        public int Updown_P6_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P7速度,Updown_P7_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P7_Speed")]
        public int Updown_P7_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P8速度,Updown_P8_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P8_Speed")]
        public int Updown_P8_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P9速度,Updown_P9_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P9_Speed")]
        public int Updown_P9_Speed { get; set; }

        /// <summary>
        /// PRO,0,移栽升降轴_P10速度,Updown_P10_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P10_Speed")]
        public int Updown_P10_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P11速度,Updown_P11_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P11_Speed")]
        public int Updown_P11_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P12速度,Updown_P12_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P12_Speed")]
        public int Updown_P12_Speed { get; set; }

        /// <summary>
        ///  PRO,0,移栽升降轴_P13速度,Updown_P13_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("Updown_P13_Speed")]
        public int Updown_P13_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取升降轴_P1速度,PullAxis_Updown_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_P1_Speed")]
        public int PullAxis_Updown_P1_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取升降轴_P2速度,PullAxis_Updown_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_P2_Speed")]
        public int PullAxis_Updown_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取升降轴_P3速度,PullAxis_Updown_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_P3_Speed")]
        public int PullAxis_Updown_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,料斗拉取升降轴_P4速度,PullAxis_Updown_P4_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("PullAxis_Updown_P4_Speed")]
        public int PullAxis_Updown_P4_Speed { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽X轴_P1速度,XAxis_A_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_A_P1_Speed")]
        public int XAxis_A_P1_Speed { get; set; }

        /// <summary>
        /// PRO,0,A面移栽X轴_P2速度,XAxis_A_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_A_P2_Speed")]
        public int XAxis_A_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽X轴_P3速度,XAxis_A_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_A_P3_Speed")]
        public int XAxis_A_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽旋转轴_P1速度,MiddleAxis_A_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_A_P1_Speed")]
        public int MiddleAxis_A_P1_Speed { get; set; }

        /// <summary>
        /// PRO,0,A面移栽旋转轴_P2速度,MiddleAxis_A_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_A_P2_Speed")]
        public int MiddleAxis_A_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽旋转轴_P3速度,MiddleAxis_A_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_A_P3_Speed")]
        public int MiddleAxis_A_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽压紧轴_P1速度,ComAxis_A_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_A_P1_Speed")]
        public int ComAxis_A_P1_Speed { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽压紧轴_P2速度,ComAxis_A_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_A_P2_Speed")]
        public int ComAxis_A_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,A面移栽压紧轴_P3速度,ComAxis_A_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_A_P3_Speed")]
        public int ComAxis_A_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽X轴_P1速度,XAxis_B_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_B_P1_Speed")]
        public int XAxis_B_P1_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽X轴_P2速度,XAxis_B_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_B_P2_Speed")]
        public int XAxis_B_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽X轴_P3速度,XAxis_B_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("XAxis_B_P3_Speed")]
        public int XAxis_B_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽旋转轴_P1速度,MiddleAxis_B_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_B_P1_Speed")]
        public int MiddleAxis_B_P1_Speed { get; set; }

        /// <summary>
        /// PRO,0,B面移栽旋转轴_P2速度,MiddleAxis_B_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_B_P2_Speed")]
        public int MiddleAxis_B_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽旋转轴_P3速度,MiddleAxis_B_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("MiddleAxis_B_P3_Speed")]
        public int MiddleAxis_B_P3_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽压紧轴_P1速度,ComAxis_B_P1_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_B_P1_Speed")]
        public int ComAxis_B_P1_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽压紧轴_P2速度,ComAxis_B_P2_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_B_P2_Speed")]
        public int ComAxis_B_P2_Speed { get; set; }

        /// <summary>
        ///  PRO,0,B面移栽压紧轴_P3速度,ComAxis_B_P3_Speed,108,,,,,,,,,,,,
        /// </summary>
        [ConfigProAttribute("ComAxis_B_P3_Speed")]
        public int ComAxis_B_P3_Speed { get; set; }
        #endregion
        #region 温湿度
        /// <summary>
        /// PRO	需要吹气的温度(温度标准)	Max_Temperature	10
        /// </summary>
        [ConfigProAttribute("Max_Temperature", false)]
        public int Max_Temperature { get; set; }
        /// <summary>
        /// PRO	需要吹气的湿度(湿度标准)	Max_Humidity	10
        /// </summary>
        [ConfigProAttribute("Max_Humidity", false)]
        public int Max_Humidity { get; set; }

        /// <summary>
        /// PRO	每次吹气的时间（分钟）	BlowAir_Time	10
        /// </summary>
        [ConfigProAttribute("BlowAir_Time", false)]
        public int BlowAir_Time { get; set; }

        /// <summary>
        /// PRO	两次吹气间隔（分钟）	BlowAir_Interval	10
        /// </summary>
        [ConfigProAttribute("BlowAir_Interval", false)]
        public int BlowAir_Interval { get; set; }

        /// <summary>
        /// PRO,温湿度端口号,Humiture_Port,COM1,,,,,,,
        /// </summary>
        [ConfigProAttribute("Humiture_Port", true)]
        public string Humiture_Port { get; set; }
        #endregion

        #region 列信号开启
        /// <summary>
        /// A面第一列信号屏蔽
        /// </summary>
        [ConfigProAttribute("A_Col1_Sig_Shield", false)]
        public int A_Col1_Sig_Shield { get; set; }
        /// <summary>
        /// A面第二列信号屏蔽
        /// </summary>
        [ConfigProAttribute("A_Col2_Sig_Shield", false)]
        public int A_Col2_Sig_Shield { get; set; }
        /// <summary>
        /// A面第三列信号屏蔽
        /// </summary>
        [ConfigProAttribute("A_Col3_Sig_Shield", false)]
        public int A_Col3_Sig_Shield { get; set; }
        /// <summary>
        /// A面第四列信号屏蔽
        /// </summary>
        [ConfigProAttribute("A_Col4_Sig_Shield", false)]
        public int A_Col4_Sig_Shield { get; set; }
        /// <summary>
        /// A面第五列信号屏蔽
        /// </summary>
        [ConfigProAttribute("A_Col5_Sig_Shield", false)]
        public int A_Col5_Sig_Shield { get; set; }
        /// <summary>
        /// A面第六列信号屏蔽
        /// </summary>
        [ConfigProAttribute("A_Col6_Sig_Shield", false)]
        public int A_Col6_Sig_Shield { get; set; }

        /// <summary>
        /// B面第一列信号屏蔽
        /// </summary>
        [ConfigProAttribute("B_Col1_Sig_Shield", false)]
        public int B_Col1_Sig_Shield { get; set; }
        /// <summary>
        /// B面第二列信号屏蔽
        /// </summary>
        [ConfigProAttribute("B_Col2_Sig_Shield", false)]
        public int B_Col2_Sig_Shield { get; set; }
        /// <summary>
        /// B面第三列信号屏蔽
        /// </summary>
        [ConfigProAttribute("B_Col3_Sig_Shield", false)]
        public int B_Col3_Sig_Shield { get; set; }
        /// <summary>
        /// B面第四列信号屏蔽
        /// </summary>
        [ConfigProAttribute("B_Col4_Sig_Shield", false)]
        public int B_Col4_Sig_Shield { get; set; }
        /// <summary>
        /// B面第五列信号屏蔽
        /// </summary>
        [ConfigProAttribute("B_Col5_Sig_Shield", false)]
        public int B_Col5_Sig_Shield { get; set; }
        /// <summary>
        /// B面第六列信号屏蔽
        /// </summary>
        [ConfigProAttribute("B_Col6_Sig_Shield", false)]
        public int B_Col6_Sig_Shield { get; set; }
        #endregion
    }
}