Skip to content

李娜 / SO827-AssemblyLine

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 62d886d7 由 LN
选项

提前获取库位号。抓料时托盘提前等待放料。发送是否紧急料给出料机构

1 个父辈 7874d5c5
内嵌 并排
正在显示 4 个修改的文件 包含 113 行增加 和 95 行删除
source/AssemblyLineClient/记录.txt
...@@ -2,6 +2,7 @@ ...@@ -2,6 +2,7 @@
1.脆盘料号配置增加界面，修改后实时生效。 1.脆盘料号配置增加界面，修改后实时生效。
2.预扫码扫码失败照片保存到文件夹。 2.预扫码扫码失败照片保存到文件夹。
3.紧急料直接放入NG箱 3.紧急料直接放入NG箱
4.入料优化：提前获取库位号。抓料时托盘提前等待放料。
20200426 20200426
......
source/DeviceLibrary/assemblyLine/FeedingEquip_InStore.cs
...@@ -413,23 +413,21 @@ namespace OnlineStore.DeviceLibrary ...@@ -413,23 +413,21 @@ namespace OnlineStore.DeviceLibrary
{ {
MoveInfo.NextMoveStep(LineMoveStep.FI_26_BatchAxisToP3); MoveInfo.NextMoveStep(LineMoveStep.FI_26_BatchAxisToP3);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000)); MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000));
//LastWidth = GetWidth();
//MoveInfo.MoveParam.PlateW = LastWidth;
InLog("料盘移栽" + MoveInfo.SLog + "：提升伺服运动到P3，横移气缸上升 "); InLog("料盘移栽" + MoveInfo.SLog + "：提升伺服运动到P3，横移气缸上升 ");
CylinderMove(null, IO_Type.SL_MoveCylinder_Take, IO_Type.SL_MoveCylinder_Give); CylinderMove(null, IO_Type.SL_MoveCylinder_Take, IO_Type.SL_MoveCylinder_Give);
BatchAxisToP3(false); BatchAxisToP3(false);
} }
else if (MoveInfo.IsStep(LineMoveStep.FI_26_BatchAxisToP3)) else if (MoveInfo.IsStep(LineMoveStep.FI_26_BatchAxisToP3))
{ {
FI_27_SaveSize();
MoveInfo.NextMoveStep(LineMoveStep.FI_27_CylinderGive); MoveInfo.NextMoveStep(LineMoveStep.FI_28_CylinderGive);
InLog("料盘移栽" + MoveInfo.SLog + "：上料横移气缸放料SOL"); InLog("料盘移栽" + MoveInfo.SLog + "：上料横移气缸放料SOL");
CylinderMove(MoveInfo, IO_Type.SL_MoveCylinder_Take, IO_Type.SL_MoveCylinder_Give); CylinderMove(MoveInfo, IO_Type.SL_MoveCylinder_Take, IO_Type.SL_MoveCylinder_Give);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(500)); MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(500));
LastHeight = GetHeight(); //LastHeight = GetHeight();
MoveInfo.MoveParam.PlateH = LastHeight; //MoveInfo.MoveParam.PlateH = LastHeight;
FI_31_GetPosID();
//判断是否还有料盘 //判断是否还有料盘
if (IOValue(IO_Type.SL_AxisLocationCheck).Equals(IO_VALUE.LOW)) if (IOValue(IO_Type.SL_AxisLocationCheck).Equals(IO_VALUE.LOW))
{ {
...@@ -454,56 +452,12 @@ namespace OnlineStore.DeviceLibrary ...@@ -454,56 +452,12 @@ namespace OnlineStore.DeviceLibrary
YuScanCode(); YuScanCode();
} }
} }
else if (MoveInfo.IsStep(LineMoveStep.FI_27_CylinderGive)) //else if (MoveInfo.IsStep(LineMoveStep.FI_28_CylinderGive))
{ //{
MoveInfo.NextMoveStep(LineMoveStep.FI_28_SaveSize); // FI_27_SaveSize();
LastWidth = GetWidth();
MoveInfo.MoveParam.PlateW = LastWidth; //}
InLog("料盘移栽" + MoveInfo.SLog + "：获取到料盘尺寸 [" + LastWidth + "X" + LastHeight + "]"); else if (MoveInfo.IsStep(LineMoveStep.FI_28_CylinderGive))
if (LastWidth.Equals(7))
{
if (LastHeight > 30)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，七寸盘默认盘高最高=30，修改高度为30");
LastHeight = 30;
}
}
else if (LastWidth.Equals(13))
{
if (LastHeight < 16)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，13寸盘默认盘高最低=16，修改高度为16");
LastHeight = 16;
}
else if (LastHeight > 36)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，13寸盘默认盘高最高=36，修改高度为36");
LastHeight = 36;
}
}
else if (LastWidth.Equals(15))
{
if (LastHeight < 16)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，15寸盘默认盘高最低=16，修改高度为16");
LastHeight = 16;
}
else if (LastHeight > 48)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，15寸盘默认盘高最高=48，修改高度为48");
LastHeight = 48;
}
}
else
{
if (LastHeight < 12)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，非七寸盘默认盘高最低=12，修改高度为12");
LastHeight = 12;
}
}
}
else if (MoveInfo.IsStep(LineMoveStep.FI_28_SaveSize))
{ {
MoveInfo.NextMoveStep(LineMoveStep.FI_29_BatchAxisDown); MoveInfo.NextMoveStep(LineMoveStep.FI_29_BatchAxisDown);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000)); MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000));
...@@ -515,38 +469,14 @@ namespace OnlineStore.DeviceLibrary ...@@ -515,38 +469,14 @@ namespace OnlineStore.DeviceLibrary
} }
else if (MoveInfo.IsStep(LineMoveStep.FI_29_BatchAxisDown)) else if (MoveInfo.IsStep(LineMoveStep.FI_29_BatchAxisDown))
{ {
FI_31_GetPosID(); FI_32_WaitTray();
//FI_31_GetPosID();
} }
else if (MoveInfo.IsStep(LineMoveStep.FI_31_GetPosID)) //else if (MoveInfo.IsStep(LineMoveStep.FI_31_GetPosID))
{ //{
if (getPosTask.IsCompleted && LastPosParam != null) // FI_32_WaitTray();
{
MoveInfo.MoveParam = LastPosParam.Clone();
MoveInfo.NextMoveStep(LineMoveStep.FI_32_WaitTray);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(100));
if ((!LastPosParam.PlateH.Equals(LastHeight)) || (!LastPosParam.PlateW.Equals(LastWidth))) //}
{
InLog(" " + MoveInfo.SLog + " 原有料盘尺寸：【" + LastWidth + "X" + LastHeight + "】更改为服务器返回尺寸【" + LastPosParam.PlateW + "X" + LastPosParam.PlateH + "】 ");
LastWidth = LastPosParam.PlateW;
LastHeight = LastPosParam.PlateH;
}
if (LastResult.Equals(98))
{
InLog(" " + MoveInfo.SLog + " 出库料，开始拦截空托盘 ");
}
else
{
InLog(" " + MoveInfo.SLog + " 入库料，开始拦截空托盘 ");
}
getPosIdMsg = "";
ClearTimeoutAlarm("获取库位号超时");
}
else if (MoveInfo.IsTimeOut(120))
{
MoveTimeOut(MoveInfo, "获取库位号超时 " + getPosIdMsg);
}
}
else if (MoveInfo.IsStep(LineMoveStep.FI_32_WaitTray))//TODO else if (MoveInfo.IsStep(LineMoveStep.FI_32_WaitTray))//TODO
{ {
currTrayNum = -1; currTrayNum = -1;
...@@ -766,6 +696,91 @@ namespace OnlineStore.DeviceLibrary ...@@ -766,6 +696,91 @@ namespace OnlineStore.DeviceLibrary
#endregion #endregion
} }
private void FI_32_WaitTray()
{
if (getPosTask!=null&& getPosTask.IsCompleted && LastPosParam != null)
{
MoveInfo.MoveParam = LastPosParam.Clone();
MoveInfo.NextMoveStep(LineMoveStep.FI_32_WaitTray);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(100));
if ((!LastPosParam.PlateH.Equals(LastHeight)) || (!LastPosParam.PlateW.Equals(LastWidth)))
{
InLog(" " + MoveInfo.SLog + " 原有料盘尺寸：【" + LastWidth + "X" + LastHeight + "】更改为服务器返回尺寸【" + LastPosParam.PlateW + "X" + LastPosParam.PlateH + "】 ");
LastWidth = LastPosParam.PlateW;
LastHeight = LastPosParam.PlateH;
}
if (LastResult.Equals(98))
{
InLog(" " + MoveInfo.SLog + " 出库料，开始拦截空托盘 ");
}
else
{
InLog(" " + MoveInfo.SLog + " 入库料，开始拦截空托盘 ");
}
getPosIdMsg = "";
ClearTimeoutAlarm("获取库位号超时");
}
else if (MoveInfo.IsTimeOut(15))
{
MoveTimeOut(MoveInfo, "获取库位号超时 " + getPosIdMsg);
}
}
private void FI_27_SaveSize()
{
MoveInfo.MoveParam.PlateH = LastHeight; MoveInfo.NextMoveStep(LineMoveStep.FI_27_SaveSize);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(500));
LastHeight = GetHeight();
LastWidth = GetWidth();
MoveInfo.MoveParam.PlateW = LastWidth;
InLog("料盘移栽" + MoveInfo.SLog + "：获取到料盘尺寸 [" + LastWidth + "X" + LastHeight + "]");
if (LastWidth.Equals(7))
{
if (LastHeight > 30)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，七寸盘默认盘高最高=30，修改高度为30");
LastHeight = 30;
}
}
else if (LastWidth.Equals(13))
{
if (LastHeight < 16)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，13寸盘默认盘高最低=16，修改高度为16");
LastHeight = 16;
}
else if (LastHeight > 36)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，13寸盘默认盘高最高=36，修改高度为36");
LastHeight = 36;
}
}
else if (LastWidth.Equals(15))
{
if (LastHeight < 16)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，15寸盘默认盘高最低=16，修改高度为16");
LastHeight = 16;
}
else if (LastHeight > 48)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，15寸盘默认盘高最高=48，修改高度为48");
LastHeight = 48;
}
}
else
{
if (LastHeight < 12)
{
LogUtil.error(Name + "计算后高度" + LastWidth + "X" + LastHeight + "，非七寸盘默认盘高最低=12，修改高度为12");
LastHeight = 12;
}
}
}
private void FI_37_TrayMoveOk() private void FI_37_TrayMoveOk()
{ {
MoveInfo.NextMoveStep(LineMoveStep.FI_37_TrayMoveOk); MoveInfo.NextMoveStep(LineMoveStep.FI_37_TrayMoveOk);
...@@ -780,9 +795,9 @@ namespace OnlineStore.DeviceLibrary ...@@ -780,9 +795,9 @@ namespace OnlineStore.DeviceLibrary
private string getPosIdMsg = ""; private string getPosIdMsg = "";
private void FI_31_GetPosID() private void FI_31_GetPosID()
{ {
MoveInfo.NextMoveStep(LineMoveStep.FI_31_GetPosID); //MoveInfo.NextMoveStep(LineMoveStep.FI_31_GetPosID);
//MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(200));
InLog("清空LastPosResult，从服务器获取入库库位"); InLog("清空LastPosResult，从服务器获取入库库位");
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(200));
LastPosParam = null; LastPosParam = null;
string code = CodeManager.ProcessCode(LastCodeList); string code = CodeManager.ProcessCode(LastCodeList);
lastcode = code; lastcode = code;
...@@ -1195,7 +1210,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -1195,7 +1210,7 @@ namespace OnlineStore.DeviceLibrary
return true; return true;
} }
//入料执行中， 可以提前拦截托盘 //入料执行中， 可以提前拦截托盘
else if (MoveInfo.MoveStep >= LineMoveStep.FI_26_BatchAxisToP3 && MoveInfo.MoveStep <= LineMoveStep.FI_32_WaitTray) else if (MoveInfo.MoveStep >= LineMoveStep.FI_22_WaitTime && MoveInfo.MoveStep <= LineMoveStep.FI_32_WaitTray)
{ {
//如果报警直接离开 //如果报警直接离开
if ((!alarmType.Equals(LineAlarmType.None)) || WarnMsg.Contains("获取库位号超时")) if ((!alarmType.Equals(LineAlarmType.None)) || WarnMsg.Contains("获取库位号超时"))
......
source/DeviceLibrary/model/StoreStep.cs
...@@ -586,14 +586,14 @@ namespace OnlineStore.DeviceLibrary ...@@ -586,14 +586,14 @@ namespace OnlineStore.DeviceLibrary
FI_26_BatchAxisToP3, FI_26_BatchAxisToP3,
/// <summary> /// <summary>
/// 料盘移栽： 上料横移气缸放料SOL /// 料盘移栽：记录高度尺寸
/// </summary> /// </summary>
FI_27_CylinderGive, FI_27_SaveSize,
/// <summary> /// <summary>
/// 料盘移栽：记录高度尺寸 /// 料盘移栽： 上料横移气缸放料SOL
/// </summary> /// </summary>
FI_28_SaveSize, FI_28_CylinderGive,
/// <summary> /// <summary>
/// 提升轴下降到料盘不溢出的位置 /// 提升轴下降到料盘不溢出的位置
/// </summary> /// </summary>
......
source/DeviceLibrary/server/LineServer.cs
...@@ -321,6 +321,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -321,6 +321,7 @@ namespace OnlineStore.DeviceLibrary
paramList.Add(S_WareCode, param.WareCode); paramList.Add(S_WareCode, param.WareCode);
paramList.Add(S_RFID, param.rfid); paramList.Add(S_RFID, param.rfid);
paramList.Add(S_NG, param.IsNG); paramList.Add(S_NG, param.IsNG);
paramList.Add(S_urgentReel, param.urgentReel);
string msg = ToParamStr(paramList); string msg = ToParamStr(paramList);
TcpClientBean client = ClientMap[id]; TcpClientBean client = ClientMap[id];
...@@ -512,6 +513,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -512,6 +513,7 @@ namespace OnlineStore.DeviceLibrary
public static string S_IsDebug = "IsDebug"; public static string S_IsDebug = "IsDebug";
public static string S_RFID = "rfid"; public static string S_RFID = "rfid";
public static string S_NG = "IsNg"; public static string S_NG = "IsNg";
public static string S_urgentReel = "urgentReel";
} }
//public class StoreReviceBean //public class StoreReviceBean
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!