Skip to content

李娜 / SO827-AssemblyLine

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 3493e779 由 LN
选项

入料T1托盘提前等待，超过15秒不可放料后自动离开

1 个父辈 664e6f40
内嵌 并排
正在显示 5 个修改的文件 包含 61 行增加 和 33 行删除
source/DeviceLibrary/assemblyLine/EquipBase.cs
...@@ -578,11 +578,11 @@ namespace OnlineStore.DeviceLibrary ...@@ -578,11 +578,11 @@ namespace OnlineStore.DeviceLibrary
LogUtil.info(Name + " 用户点击了：忽略夹爪有料信号，继续出入库动作"); LogUtil.info(Name + " 用户点击了：忽略夹爪有料信号，继续出入库动作");
wait.IsEnd = true; wait.IsEnd = true;
} }
//如果出力>=0.3 //如果出力>=0.3，且已等待5秒
float torque = ClampJwa.GetTorque(); float torque = ClampJwa.GetTorque();
if ((!wait.IsEnd) && torque>0.25) if ((!wait.IsEnd) && torque > 0.25 && span.TotalSeconds > 5)
{ {
LogUtil.info(Name + " 无料，但力度为["+ torque + "]>=0.25认为有料"); LogUtil.info(Name + " 无料，但力度为[" + torque + "]>=0.25认为有料");
wait.IsEnd = true; wait.IsEnd = true;
} }
} }
...@@ -690,7 +690,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -690,7 +690,7 @@ namespace OnlineStore.DeviceLibrary
} }
string posId = MoveInfo.MoveParam != null ? "[" + currTrayNum + "][" + MoveInfo.MoveParam.PosId + "][" + MoveInfo.MoveParam.WareCode + "]" : ""; string posId = MoveInfo.MoveParam != null ? "[" + currTrayNum + "][" + MoveInfo.MoveParam.PosId + "][" + MoveInfo.MoveParam.WareCode + "]" : "";
//baseConfig.DType.Equals(DeviceType.HYEquip) //baseConfig.DType.Equals(DeviceType.HYEquip)
if (baseConfig.DType.Equals(DeviceType.MoveEquip)) if (baseConfig.DType.Equals(DeviceType.MoveEquip)&&(!OnlyProOutTray))
{ {
LogUtil.debug(Name + " " + posId + msg); LogUtil.debug(Name + " " + posId + msg);
} }
......
source/DeviceLibrary/assemblyLine/FeedingEquip_InStore.cs
...@@ -831,10 +831,11 @@ namespace OnlineStore.DeviceLibrary ...@@ -831,10 +831,11 @@ namespace OnlineStore.DeviceLibrary
{ {
// MoveInfo.NextMoveStep(LineMoveStep.FI_21_BatchAxisDown); // MoveInfo.NextMoveStep(LineMoveStep.FI_21_BatchAxisDown);
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(200)); MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(200));
int maxtPosition = Config.BatchAxisP3 - Config.Height_ChangeValue * 30; //在上料位置基础上下降30mm int h = 20;
int maxtPosition = Config.BatchAxisP3 - Config.Height_ChangeValue * h; //在上料位置基础上下降30mm
int currPositon = BatchAxis.GetAclPosition(); int currPositon = BatchAxis.GetAclPosition();
int targetPosition = currPositon - Config.Height_ChangeValue * 30; int targetPosition = currPositon - Config.Height_ChangeValue * h;
if (targetPosition <= Config.BatchAxisP2) if (targetPosition <= Config.BatchAxisP2)
{ {
targetPosition = Config.BatchAxisP2; targetPosition = Config.BatchAxisP2;
...@@ -1096,7 +1097,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -1096,7 +1097,7 @@ namespace OnlineStore.DeviceLibrary
{ {
LineManager.Line.TrayCanLeave(DeviceID); LineManager.Line.TrayCanLeave(DeviceID);
} }
internal bool CurrTrayIsNeed(int trayNum, bool NeedSaveParam) internal bool CurrTrayIsNeed(int trayNum )
{ {
try try
{ {
...@@ -1157,10 +1158,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -1157,10 +1158,10 @@ namespace OnlineStore.DeviceLibrary
return false; return false;
} }
} }
if (NeedSaveParam) //if (NeedSaveParam)
{ //{
LogInfo(" 【" + info.ToStr() + "】需要出库 ，拦截托盘 "); // LogInfo(" 【" + info.ToStr() + "】需要出库 ，拦截托盘 ");
} //}
return true; return true;
} }
...@@ -1172,26 +1173,34 @@ namespace OnlineStore.DeviceLibrary ...@@ -1172,26 +1173,34 @@ namespace OnlineStore.DeviceLibrary
{ {
//入料执行中， 且需要空托盘 //入料执行中， 且需要空托盘
if (MoveInfo.IsStep(LineMoveStep.FI_32_WaitTray) && MoveInfo.IsInWait.Equals(false)) if (MoveInfo.IsStep(LineMoveStep.FI_32_WaitTray) && MoveInfo.IsInWait.Equals(false))
{
return true;
}
//入料执行中， 可以提前拦截托盘
if (MoveInfo.MoveStep >= LineMoveStep.FI_27_CylinderGive && MoveInfo.MoveStep <= LineMoveStep.FI_32_WaitTray)
{ {
//如果报警直接离开
//if (NeedEmptyTrayGo()) if ((!alarmType.Equals(LineAlarmType.None)) || WarnMsg.Contains("获取库位号超时"))
//{
// LogUtil.info(Name + "拦截到空托盘【" + trayNum + "】，后续料仓需要空托盘，放行托盘");
// return false;
//}
if (NeedSaveParam)
{ {
LogUtil.info(Name + "拦截到空托盘【" + trayNum + "】，入料执行中，需要空托盘"); return false;
} }
return true; List<MoveEquip> equips = new List<MoveEquip>(LineManager.Line.MoveEquipMap.Values);
//如果有移栽在等待空托盘，需要放行
foreach(MoveEquip move in equips)
{
if (move.IsWaitEmptyTray())
{
return false;
}
}
return true;
} }
} }
} }
if (NeedSaveParam && LineManager.Line.runStatus >= LineRunStatus.HomeMoving && LineManager.Line.CanProcessLine()) //if ( LineManager.Line.runStatus >= LineRunStatus.HomeMoving && LineManager.Line.CanProcessLine())
{ //{
LogUtil.debug(" 【" + info.ToStr() + "】不需要出入库"); // LogUtil.debug(" 【" + info.ToStr() + "】不需要出入库");
} //}
} }
catch (Exception ex) catch (Exception ex)
{ {
......
source/DeviceLibrary/assemblyLine/HY/HY_C1_SLStation.cs
...@@ -385,7 +385,16 @@ namespace OnlineStore.DeviceLibrary ...@@ -385,7 +385,16 @@ namespace OnlineStore.DeviceLibrary
} }
else if (MoveInfo.IsStep(LineMoveStep.HY08_SL_WaitProcessReel)) else if (MoveInfo.IsStep(LineMoveStep.HY08_SL_WaitProcessReel))
{ {
//如果超15秒，且入料机构还未开始拦截托盘，放托盘离开
if (Config.WorkDeviceId > 0&&MoveInfo.IsTimeOut(15))
{
FeedingEquip feedT = LineManager.Line.FeedingEquipMap[Config.WorkDeviceId];
if (!feedT.WaitEmptyTray())
{
LogUtil.info(Name +" "+ MoveInfo.SLog + " 已等待15秒，且["+ feedT .Name+ "]未开始等待空托盘，先放托盘离开");
TrayCanLeave();
}
}
} }
else if (MoveInfo.IsStep(LineMoveStep.HY09_SL_ReelProEnd)) else if (MoveInfo.IsStep(LineMoveStep.HY09_SL_ReelProEnd))
{ {
...@@ -527,6 +536,16 @@ namespace OnlineStore.DeviceLibrary ...@@ -527,6 +536,16 @@ namespace OnlineStore.DeviceLibrary
} }
else if (MoveInfo.IsStep(LineMoveStep.HY59_SL_WaitProcessReel)) else if (MoveInfo.IsStep(LineMoveStep.HY59_SL_WaitProcessReel))
{ {
//如果超15秒，且入料机构还未开始拦截托盘，放托盘离开
if (Config.WorkDeviceId > 0 && MoveInfo.IsTimeOut(15))
{
FeedingEquip feedT = LineManager.Line.FeedingEquipMap[Config.WorkDeviceId];
if (!feedT.WaitEmptyTray())
{
LogUtil.info(Name + " " + MoveInfo.SLog + " 已等待15秒，且[" + feedT.Name + "]未开始等待空托盘，先放托盘离开");
TrayCanLeave();
}
}
} }
else if (MoveInfo.IsStep(LineMoveStep.HY60_SL_ReelProEnd)) else if (MoveInfo.IsStep(LineMoveStep.HY60_SL_ReelProEnd))
{ {
...@@ -610,7 +629,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -610,7 +629,7 @@ namespace OnlineStore.DeviceLibrary
//判断上料T是否在入库等待托盘 //判断上料T是否在入库等待托盘
FeedingEquip feedT = LineManager.Line.FeedingEquipMap[Config.WorkDeviceId]; FeedingEquip feedT = LineManager.Line.FeedingEquipMap[Config.WorkDeviceId];
if (feedT.CurrTrayIsNeed(currTrayNum, false)) if (feedT.CurrTrayIsNeed(currTrayNum ))
{ {
LogInfo(" " + feedT.Name + "拦截托盘【" + currTrayNum + "】"); LogInfo(" " + feedT.Name + "拦截托盘【" + currTrayNum + "】");
return true; return true;
......
source/DeviceLibrary/assemblyLine/MoveEquip_Partial.cs
...@@ -663,13 +663,13 @@ namespace OnlineStore.DeviceLibrary ...@@ -663,13 +663,13 @@ namespace OnlineStore.DeviceLibrary
string code = MoveInfo.MoveParam.WareCode; string code = MoveInfo.MoveParam.WareCode;
if (MoveInfo.MoveParam.IsNG) if (MoveInfo.MoveParam.IsNG)
{ {
OutLog(MoveInfo.SLog + "，NG料已放到出料口，发送 cancelPutInTask "); InLog(MoveInfo.SLog + "，NG料已放到出料口，发送 cancelPutInTask " );
string msg = SServerManager.cancelPutInTask(Name, code); string msg = SServerManager.cancelPutInTask(Name, code);
afterPutCutOK = true; afterPutCutOK = true;
} }
else else
{ {
OutLog(MoveInfo.SLog + "，工单料到达接驳台，发送 arrive3fRobotLocation "); InLog(MoveInfo.SLog + "，工单料到达接驳台，发送 arrive3fRobotLocation ");
string msg = SServerManager.arrive3fRobotLocation(Name, 1, code); string msg = SServerManager.arrive3fRobotLocation(Name, 1, code);
afterPutCutOK = true; afterPutCutOK = true;
} }
......
source/DeviceLibrary/model/StoreStep.cs
...@@ -600,10 +600,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -600,10 +600,10 @@ namespace OnlineStore.DeviceLibrary
/// </summary> /// </summary>
FI_31_GetPosID, FI_31_GetPosID,
/// <summary> ///// <summary>
/// 料盘移栽：此料盘是出库料盘，获取出库信息 ///// 料盘移栽：此料盘是出库料盘，获取出库信息
/// </summary> ///// </summary>
FI_32_GetReelInfo, //FI_32_GetReelInfo,
/// <summary> /// <summary>
/// 料盘移栽：等待空托盘到达，移栽伺服下降到P2，并预扫码 /// 料盘移栽：等待空托盘到达，移栽伺服下降到P2，并预扫码
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!