新建项目

.gitignore

-###############################################################################
-# Set default behavior to automatically normalize line endings.
-###############################################################################
-* text=auto
-
-###############################################################################
-# Set default behavior for command prompt diff.
-#
-# This is need for earlier builds of msysgit that does not have it on by
-# default for csharp files.
-# Note: This is only used by command line
-###############################################################################
-#*.cs     diff=csharp
-
-###############################################################################
-# Set the merge driver for project and solution files
-#
-# Merging from the command prompt will add diff markers to the files if there
-# are conflicts (Merging from VS is not affected by the settings below, in VS
-# the diff markers are never inserted). Diff markers may cause the following 
-# file extensions to fail to load in VS. An alternative would be to treat
-# these files as binary and thus will always conflict and require user
-# intervention with every merge. To do so, just uncomment the entries below
-###############################################################################
-#*.sln       merge=binary
-#*.csproj    merge=binary
-#*.vbproj    merge=binary
-#*.vcxproj   merge=binary
-#*.vcproj    merge=binary
-#*.dbproj    merge=binary
-#*.fsproj    merge=binary
-#*.lsproj    merge=binary
-#*.wixproj   merge=binary
-#*.modelproj merge=binary
-#*.sqlproj   merge=binary
-#*.wwaproj   merge=binary
-
-###############################################################################
-# behavior for image files
-#
-# image files are treated as binary by default.
-###############################################################################
-#*.jpg   binary
-#*.png   binary
-#*.gif   binary
-
-###############################################################################
-# diff behavior for common document formats
-# 
-# Convert binary document formats to text before diffing them. This feature
-# is only available from the command line. Turn it on by uncommenting the 
-# entries below.
-###############################################################################
-#*.doc   diff=astextplain
-#*.DOC   diff=astextplain
-#*.docx  diff=astextplain
-#*.DOCX  diff=astextplain
-#*.dot   diff=astextplain
-#*.DOT   diff=astextplain
-#*.pdf   diff=astextplain
-#*.PDF   diff=astextplain
-#*.rtf   diff=astextplain
-#*.RTF   diff=astextplain
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+
+# User-specific files
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+bld/
+[Bb]in/
+[Oo]bj/
+[Ll]og/
+
+# Visual Studio 2015 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUNIT
+*.VisualState.xml
+TestResult.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# DNX
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+*_i.c
+*_p.c
+*_i.h
+*.ilk
+*.meta
+*.obj
+*.pch
+*.pdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# JustCode is a .NET coding add-in
+.JustCode
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# TODO: Comment the next line if you want to checkin your web deploy settings
+# but database connection strings (with potential passwords) will be unencrypted
+#*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# The packages folder can be ignored because of Package Restore
+**/packages/*
+# except build/, which is used as an MSBuild target.
+!**/packages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/packages/repositories.config
+# NuGet v3's project.json files produces more ignoreable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+node_modules/
+orleans.codegen.cs
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+
+# SQL Server files
+*.mdf
+*.ldf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# JetBrains Rider
+.idea/
+*.sln.iml
+
+# CodeRush
+.cr/
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
\ No newline at end of file

ProCopyClient/App.config

+<?xml version="1.0" encoding="utf-8" ?>
+<configuration>
+    <startup> 
+        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1" />
+    </startup>
+  <appSettings>
+    
+    <add key="ProName" value="ACSingleStore" />
+  </appSettings>
+</configuration>
\ No newline at end of file

ProCopyClient/ConfigAppSettings.cs

+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Configuration;
+using System.Threading;
+using System.Xml;
+using System.Windows.Forms; 
+
+namespace ProCopyClient
+{
+    public class ConfigAppSettings
+    { 
+        
+        public static string GetValue(string keyStr, string storeStr)
+        {
+            string key = keyStr + storeStr;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                return GetValue(keyStr);
+            }
+            else
+            {
+                return config.AppSettings.Settings[key].Value;
+            }
+        }
+
+        public static decimal GetNumValue(string keyStr, string storeStr)
+        {
+            string key = keyStr + storeStr;
+            decimal a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                return GetNumValue(keyStr);
+            }
+            else
+            {
+                {
+                    Decimal.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            }
+            return a;
+        }
+        public static int GetIntValue(string keyStr, string storeStr)
+        {
+            string key = keyStr + storeStr;
+            int a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                return GetIntValue(keyStr);
+            }
+            else
+            {
+                {
+                    Int32.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            } return a;
+        }
+        public static string GetValue(string key)
+        {
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            { 
+                return "";
+            }
+            else
+            {
+                return config.AppSettings.Settings[key].Value;
+            }
+        }
+
+        public static decimal GetNumValue(string key)
+        {
+            decimal a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            { 
+                return a;
+            }
+            else
+            {
+                {
+                    Decimal.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            }
+            return a;
+        }
+        public static int GetIntValue(string key)
+        {
+            int a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            { 
+                return a; 
+            }
+            else
+            {
+                {
+                    Int32.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            } return a;
+        }
+        public static void SaveValue(string key, int value)
+        {
+            SaveValue(key, value.ToString());
+        }
+        public static void SaveValue(string key, string value)
+        {
+            try
+            {
+                if (key.Equals("") || value.Equals(""))
+                {
+                    //return;
+                }
+                //增加的内容写在appSettings段下 <add key="RegCode" value="0"/> 
+                System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+                if (config.AppSettings.Settings[key] == null)
+                {
+                    SetValue(key, value);
+                }
+                else
+                {
+                    UpdateConfig(key, value);
+                }
+            }
+            catch (Exception ex)
+            {
+                //LogUtil.error(LOGGER, "SaveValue保存配置出错：AppKey=" + key + "，AppValue=" + value + "," + ex.StackTrace);
+            }
+        }
+
+        /// <summary>
+        /// 更新配置文件信息
+        /// </summary>
+        /// <param name="name">配置文件字段名称</param>
+        /// <param name="Xvalue">值</param>
+        private static void UpdateConfig(string name, string Xvalue)
+        {
+            try
+            {
+                XmlDocument doc = new XmlDocument();
+                doc.Load(Application.ExecutablePath + ".config");
+                XmlNode node = doc.SelectSingleNode(@"//add[@key='" + name + "']");
+                XmlElement ele = (XmlElement)node;
+                ele.SetAttribute("value", Xvalue);
+                doc.Save(Application.ExecutablePath + ".config");
+            }
+            catch (Exception ex)
+            {
+              //  LogUtil.error(LOGGER, "UpdateConfig保存配置出错：name=" + name + "，Xvalue=" + Xvalue + "," + ex.StackTrace);
+            }
+        }
+        ///<summary>  
+        ///向.config文件的appKey结写入信息AppValue   保存设置  
+        ///</summary>  
+        ///<param name="AppKey">节点名</param>  
+        ///<param name="AppValue">值</param>
+        private static void SetValue(String AppKey, String AppValue)
+        {
+            try
+            {
+                XmlDocument xDoc = new XmlDocument();
+                xDoc.Load(System.Windows.Forms.Application.ExecutablePath + ".config");
+                XmlNode xNode;
+                XmlElement xElem1;
+                XmlElement xElem2;
+                xNode = xDoc.SelectSingleNode("//appSettings");
+                xElem1 = (XmlElement)xNode.SelectSingleNode("//add[@key='" + AppKey + "']");
+                if (xElem1 != null)
+                    xElem1.SetAttribute("value", AppValue);
+                else
+                {
+                    xElem2 = xDoc.CreateElement("add");
+                    xElem2.SetAttribute("key", AppKey);
+                    xElem2.SetAttribute("value", AppValue);
+                    xNode.AppendChild(xElem2);
+                }
+                xDoc.Save(System.Windows.Forms.Application.ExecutablePath + ".config");
+            }
+            catch (Exception ex)
+            {
+             //   LogUtil.error(LOGGER, "SetValue保存配置出错：AppKey=" + AppKey + "，AppValue=" + AppValue + "," + ex.StackTrace);
+            }
+        }
+    }
+}

ProCopyClient/FrmMain.Designer.cs

+namespace ProCopyClient
+{
+    partial class FrmMain
+    {
+        /// <summary>
+        /// 必需的设计器变量。
+        /// </summary>
+        private System.ComponentModel.IContainer components = null;
+
+        /// <summary>
+        /// 清理所有正在使用的资源。
+        /// </summary>
+        /// <param name="disposing">如果应释放托管资源，为 true；否则为 false。</param>
+        protected override void Dispose(bool disposing)
+        {
+            if (disposing && (components != null))
+            {
+                components.Dispose();
+            }
+            base.Dispose(disposing);
+        }
+
+        #region Windows 窗体设计器生成的代码
+
+        /// <summary>
+        /// 设计器支持所需的方法 - 不要修改
+        /// 使用代码编辑器修改此方法的内容。
+        /// </summary>
+        private void InitializeComponent()
+        {
+            this.button1 = new System.Windows.Forms.Button();
+            this.button2 = new System.Windows.Forms.Button();
+            this.label1 = new System.Windows.Forms.Label();
+            this.txtProName = new System.Windows.Forms.TextBox();
+            this.button3 = new System.Windows.Forms.Button();
+            this.SuspendLayout();
+            // 
+            // button1
+            // 
+            this.button1.Font = new System.Drawing.Font("微软雅黑", 10.5F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.button1.Location = new System.Drawing.Point(100, 187);
+            this.button1.Name = "button1";
+            this.button1.Size = new System.Drawing.Size(217, 55);
+            this.button1.TabIndex = 0;
+            this.button1.Text = "L-R-程序   更新文件复制";
+            this.button1.UseVisualStyleBackColor = true;
+            this.button1.Click += new System.EventHandler(this.button1_Click);
+            // 
+            // button2
+            // 
+            this.button2.Font = new System.Drawing.Font("微软雅黑", 10.5F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.button2.Location = new System.Drawing.Point(100, 112);
+            this.button2.Name = "button2";
+            this.button2.Size = new System.Drawing.Size(217, 55);
+            this.button2.TabIndex = 1;
+            this.button2.Text = "单个程序   更新文件复制";
+            this.button2.UseVisualStyleBackColor = true;
+            this.button2.Click += new System.EventHandler(this.button2_Click);
+            // 
+            // label1
+            // 
+            this.label1.AutoSize = true;
+            this.label1.Font = new System.Drawing.Font("微软雅黑", 10.5F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.label1.Location = new System.Drawing.Point(58, 40);
+            this.label1.Name = "label1";
+            this.label1.Size = new System.Drawing.Size(79, 20);
+            this.label1.TabIndex = 2;
+            this.label1.Text = "程序名称：";
+            // 
+            // txtProName
+            // 
+            this.txtProName.Font = new System.Drawing.Font("微软雅黑", 10.5F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.txtProName.Location = new System.Drawing.Point(143, 37);
+            this.txtProName.Name = "txtProName";
+            this.txtProName.Size = new System.Drawing.Size(192, 26);
+            this.txtProName.TabIndex = 3;
+            this.txtProName.Text = "ACSingleStore";
+            // 
+            // button3
+            // 
+            this.button3.Font = new System.Drawing.Font("微软雅黑", 10.5F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.button3.Location = new System.Drawing.Point(389, 187);
+            this.button3.Name = "button3";
+            this.button3.Size = new System.Drawing.Size(93, 55);
+            this.button3.TabIndex = 4;
+            this.button3.Text = "退出";
+            this.button3.UseVisualStyleBackColor = true;
+            this.button3.Click += new System.EventHandler(this.button3_Click);
+            // 
+            // FrmMain
+            // 
+            this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 12F);
+            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+            this.ClientSize = new System.Drawing.Size(494, 283);
+            this.Controls.Add(this.button3);
+            this.Controls.Add(this.txtProName);
+            this.Controls.Add(this.label1);
+            this.Controls.Add(this.button2);
+            this.Controls.Add(this.button1);
+            this.Name = "FrmMain";
+            this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
+            this.Text = "客户端复制";
+            this.Load += new System.EventHandler(this.FrmMain_Load);
+            this.ResumeLayout(false);
+            this.PerformLayout();
+
+        }
+
+        #endregion
+
+        private System.Windows.Forms.Button button1;
+        private System.Windows.Forms.Button button2;
+        private System.Windows.Forms.Label label1;
+        private System.Windows.Forms.TextBox txtProName;
+        private System.Windows.Forms.Button button3;
+    }
+}
+

ProCopyClient/FrmMain.cs

+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Drawing;
+using System.IO;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace ProCopyClient
+{
+    public partial class FrmMain : Form
+    {
+        public FrmMain()
+        {
+            InitializeComponent();
+        }
+
+        private void button1_Click(object sender, EventArgs e)
+        {
+            try
+            {
+                string path = Application.StartupPath + "/Debug/";
+                if (Directory.Exists(path).Equals(false))
+                {
+                    MessageBox.Show("未找到Debug文件夹");
+                    return;
+                }
+                string proName = txtProName.Text.Trim();
+                ConfigAppSettings.SaveValue("ProName", proName);
+                string date = DateTime.Now.ToString("yyyyMMdd");
+                string leftPath = Application.StartupPath + "\\" + date + "-" + proName + "L-更新" + "\\";
+                string rightPath = Application.StartupPath + "\\" + date + "-" + proName + "R-更新" + "\\";
+
+                if (Directory.Exists(leftPath))
+                {
+                    Directory.Delete(leftPath, true);
+                }
+                if (Directory.Exists(rightPath))
+                {
+                    Directory.Delete(rightPath, true);
+                }
+                Directory.CreateDirectory(leftPath);
+                Directory.CreateDirectory(rightPath);
+                //将此目录的更新文件，复制到上一层的文件夹中
+
+                string[] fileList = Directory.GetFiles(path);
+
+
+
+                foreach (string file in fileList)
+                {
+                    FileInfo fileInfo = new FileInfo(file);
+                    TimeSpan span = DateTime.Now - fileInfo.LastWriteTime;
+                    string exName = Path.GetExtension(file);
+                    string fileName = Path.GetFileName(file);
+                    if (span.TotalDays < 1)
+                    {
+                        if (exName.ToLower().Equals(".dll"))
+                        {
+                            File.Copy(file, leftPath + fileName);
+                            File.Copy(file, rightPath + fileName);
+                        }
+                        else if (exName.ToLower().Equals(".exe"))
+                        {
+                            string f = Path.GetFileNameWithoutExtension(file);
+                            File.Copy(file, leftPath + f + "L" + exName);
+                            File.Copy(file, rightPath + f + "R" + exName);
+                        }
+                    }
+                }
+                MessageBox.Show("更新文件复制完成");
+            }
+            catch (Exception ex)
+            {
+                MessageBox.Show(ex.ToString());
+            }
+        }
+
+        private void button2_Click(object sender, EventArgs e)
+        {
+            try
+            {
+                string path = Application.StartupPath + "/Debug/";
+                if (Directory.Exists(path).Equals(false))
+                {
+                    MessageBox.Show("未找到Debug文件夹");
+                    return;
+                }
+                string proName = txtProName.Text.Trim();
+                ConfigAppSettings.SaveValue("ProName", proName);
+                string date = DateTime.Now.ToString("yyyyMMdd");
+                string leftPath = Application.StartupPath + "\\" + date + "-" + proName + "-更新" + "\\";
+
+
+                if (Directory.Exists(leftPath))
+                {
+                    Directory.Delete(leftPath, true);
+                }
+                Directory.CreateDirectory(leftPath);
+                //将此目录的更新文件，复制到上一层的文件夹中
+
+                string[] fileList = Directory.GetFiles(path);
+
+                foreach (string file in fileList)
+                {
+                    FileInfo fileInfo = new FileInfo(file);
+                    TimeSpan span = DateTime.Now - fileInfo.LastWriteTime;
+                    string exName = Path.GetExtension(file);
+                    string fileName = Path.GetFileName(file);
+                    if (span.TotalDays < 1)
+                    {
+                        if (exName.ToLower().Equals(".dll"))
+                        {
+                            File.Copy(file, leftPath + fileName);
+                        }
+                        else if (exName.ToLower().Equals(".pdb"))
+                        {
+                            File.Copy(file, leftPath + fileName);
+                        }
+                        else if (exName.ToLower().Equals(".exe"))
+                        {
+                            string f = Path.GetFileNameWithoutExtension(file);
+                            File.Copy(file, leftPath + f + "" + exName);
+                        }
+                    }
+                }
+                MessageBox.Show("更新文件复制完成");
+            }
+            catch (Exception ex)
+            {
+                MessageBox.Show(ex.ToString());
+            }
+        }
+
+        private void button3_Click(object sender, EventArgs e)
+        {
+            this.Close();
+        }
+
+        private void FrmMain_Load(object sender, EventArgs e)
+        {
+
+            txtProName.Text = ConfigAppSettings.GetValue("ProName");
+        }
+    }
+}

ProCopyClient/FrmMain.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file

ProCopyClient/ProCopyClient.csproj

+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{63ED00F8-B7E2-4674-859C-22B11625CAE8}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <RootNamespace>ProCopyClient</RootNamespace>
+    <AssemblyName>ProCopyClient</AssemblyName>
+    <TargetFrameworkVersion>v4.6.1</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
+    <Deterministic>true</Deterministic>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>..\source\ACSingleStore\bin\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="System" />
+    <Reference Include="System.Configuration" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Deployment" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Net.Http" />
+    <Reference Include="System.Windows.Forms" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="ConfigAppSettings.cs" />
+    <Compile Include="FrmMain.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmMain.Designer.cs">
+      <DependentUpon>FrmMain.cs</DependentUpon>
+    </Compile>
+    <Compile Include="Program.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <EmbeddedResource Include="FrmMain.resx">
+      <DependentUpon>FrmMain.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Resources.resx</DependentUpon>
+    </Compile>
+    <None Include="Properties\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
+    </None>
+    <Compile Include="Properties\Settings.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="App.config" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+</Project>
\ No newline at end of file

ProCopyClient/Program.cs

+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace ProCopyClient
+{
+    static class Program
+    {
+        /// <summary>
+        /// 应用程序的主入口点。
+        /// </summary>
+        [STAThread]
+        static void Main()
+        {
+            Application.EnableVisualStyles();
+            Application.SetCompatibleTextRenderingDefault(false);
+            Application.Run(new FrmMain());
+        }
+    }
+}

ProCopyClient/Properties/AssemblyInfo.cs

+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// 有关程序集的一般信息由以下
+// 控制。更改这些特性值可修改
+// 与程序集关联的信息。
+[assembly: AssemblyTitle("ProCopyClient")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("ProCopyClient")]
+[assembly: AssemblyCopyright("Copyright ©  2019")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// 将 ComVisible 设置为 false 会使此程序集中的类型
+//对 COM 组件不可见。如果需要从 COM 访问此程序集中的类型
+//请将此类型的 ComVisible 特性设置为 true。
+[assembly: ComVisible(false)]
+
+// 如果此项目向 COM 公开，则下列 GUID 用于类型库的 ID
+[assembly: Guid("63ed00f8-b7e2-4674-859c-22b11625cae8")]
+
+// 程序集的版本信息由下列四个值组成: 
+//
+//      主版本
+//      次版本
+//      生成号
+//      修订号
+//
+// 可以指定所有值，也可以使用以下所示的 "*" 预置版本号和修订号
+// 方法是按如下所示使用“*”: :
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]

ProCopyClient/Properties/Resources.Designer.cs

+//------------------------------------------------------------------------------
+// <auto-generated>
+//     此代码由工具生成。
+//     运行时版本: 4.0.30319.42000
+//
+//     对此文件的更改可能导致不正确的行为，如果
+//     重新生成代码，则所做更改将丢失。
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace ProCopyClient.Properties
+{
+
+
+    /// <summary>
+    ///   强类型资源类，用于查找本地化字符串等。
+    /// </summary>
+    // 此类是由 StronglyTypedResourceBuilder
+    // 类通过类似于 ResGen 或 Visual Studio 的工具自动生成的。
+    // 若要添加或删除成员，请编辑 .ResX 文件，然后重新运行 ResGen
+    // (以 /str 作为命令选项)，或重新生成 VS 项目。
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources
+    {
+
+        private static global::System.Resources.ResourceManager resourceMan;
+
+        private static global::System.Globalization.CultureInfo resourceCulture;
+
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources()
+        {
+        }
+
+        /// <summary>
+        ///   返回此类使用的缓存 ResourceManager 实例。
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager
+        {
+            get
+            {
+                if ((resourceMan == null))
+                {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("ProCopyClient.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+
+        /// <summary>
+        ///   覆盖当前线程的 CurrentUICulture 属性
+        ///   使用此强类型的资源类的资源查找。
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture
+        {
+            get
+            {
+                return resourceCulture;
+            }
+            set
+            {
+                resourceCulture = value;
+            }
+        }
+    }
+}

ProCopyClient/Properties/Resources.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file

ProCopyClient/Properties/Settings.Designer.cs

+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//     Runtime Version:4.0.30319.42000
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace ProCopyClient.Properties
+{
+
+
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "11.0.0.0")]
+    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase
+    {
+
+        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
+
+        public static Settings Default
+        {
+            get
+            {
+                return defaultInstance;
+            }
+        }
+    }
+}

ProCopyClient/Properties/Settings.settings

+<?xml version='1.0' encoding='utf-8'?>
+<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
+  <Profiles>
+    <Profile Name="(Default)" />
+  </Profiles>
+  <Settings />
+</SettingsFile>

README.md

+# ACSingleStore
+松下伺服485通信的料仓（不用板卡）
\ No newline at end of file

SO664-HCSingleStore.sln

+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 16
+VisualStudioVersion = 16.0.29519.87
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ACSingleStore", "source\ACSingleStore\ACSingleStore.csproj", "{0D2542F5-DD62-4352-82D0-383D9A045E74}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Common", "source\Common\Common.csproj", "{43CDD09E-FCF3-4960-A01D-3BBFE9933122}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DeviceLibrary", "source\DeviceLibrary\DeviceLibrary.csproj", "{513BC1C9-800D-43A6-9499-3700BAEC3554}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "UserFromControl", "source\UserFromControl\UserFromControl.csproj", "{F018462A-D9BC-4365-97F2-F6D71751641E}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "LoadCSVLibrary", "source\LoadCVSLibrary\LoadCSVLibrary.csproj", "{064BEBF5-8FAA-4EA2-A5F3-A06E6E7D9251}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "ProCopyClient", "ProCopyClient\ProCopyClient.csproj", "{63ED00F8-B7E2-4674-859C-22B11625CAE8}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{0D2542F5-DD62-4352-82D0-383D9A045E74}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{0D2542F5-DD62-4352-82D0-383D9A045E74}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{0D2542F5-DD62-4352-82D0-383D9A045E74}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{0D2542F5-DD62-4352-82D0-383D9A045E74}.Release|Any CPU.Build.0 = Release|Any CPU
+		{43CDD09E-FCF3-4960-A01D-3BBFE9933122}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{43CDD09E-FCF3-4960-A01D-3BBFE9933122}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{43CDD09E-FCF3-4960-A01D-3BBFE9933122}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{43CDD09E-FCF3-4960-A01D-3BBFE9933122}.Release|Any CPU.Build.0 = Release|Any CPU
+		{513BC1C9-800D-43A6-9499-3700BAEC3554}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{513BC1C9-800D-43A6-9499-3700BAEC3554}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{513BC1C9-800D-43A6-9499-3700BAEC3554}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{513BC1C9-800D-43A6-9499-3700BAEC3554}.Release|Any CPU.Build.0 = Release|Any CPU
+		{F018462A-D9BC-4365-97F2-F6D71751641E}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{F018462A-D9BC-4365-97F2-F6D71751641E}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{F018462A-D9BC-4365-97F2-F6D71751641E}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{F018462A-D9BC-4365-97F2-F6D71751641E}.Release|Any CPU.Build.0 = Release|Any CPU
+		{064BEBF5-8FAA-4EA2-A5F3-A06E6E7D9251}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{064BEBF5-8FAA-4EA2-A5F3-A06E6E7D9251}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{064BEBF5-8FAA-4EA2-A5F3-A06E6E7D9251}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{064BEBF5-8FAA-4EA2-A5F3-A06E6E7D9251}.Release|Any CPU.Build.0 = Release|Any CPU
+		{63ED00F8-B7E2-4674-859C-22B11625CAE8}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{63ED00F8-B7E2-4674-859C-22B11625CAE8}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{63ED00F8-B7E2-4674-859C-22B11625CAE8}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{63ED00F8-B7E2-4674-859C-22B11625CAE8}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {5459501E-8250-488F-B563-3C6777AEFCBA}
+	EndGlobalSection
+EndGlobal

dll/Asa.IOModule.AIOBOX.xml

+<?xml version="1.0"?>
+<doc>
+    <assembly>
+        <name>Asa.IOModule.AIOBOX</name>
+    </assembly>
+    <members>
+        <member name="T:Asa.IOModule.AIOBOX">
+            <summary>
+            零点IO模块操作类
+            </summary>
+        </member>
+        <member name="T:Asa.IOModule.AIOBOX.DIO_Changed">
+            <summary>
+            自动读取DI委托
+            </summary>
+            <param name="box">AIOBOX</param>
+            <param name="sta">所有DI状态</param>
+        </member>
+        <member name="E:Asa.IOModule.AIOBOX.DI_Changed_Event">
+            <summary>
+            自动读取DI事件触发
+            </summary>
+        </member>
+        <member name="E:Asa.IOModule.AIOBOX.DO_Changed_Event">
+            <summary>
+            自动读取DO事件触发
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.#ctor(System.String)">
+            <summary>
+            零点IO模块操作类
+            </summary>
+            <param name="logName"></param>
+        </member>
+        <member name="P:Asa.IOModule.AIOBOX.IP">
+            <summary>
+            IP地址
+            </summary>
+        </member>
+        <member name="P:Asa.IOModule.AIOBOX.Upload">
+            <summary>
+            输入主动上传
+            </summary>
+        </member>
+        <member name="P:Asa.IOModule.AIOBOX.IsConn">
+            <summary>
+            是否连接
+            </summary>
+        </member>
+        <member name="P:Asa.IOModule.AIOBOX.InputCount">
+            <summary>
+            DI总数
+            </summary>
+        </member>
+        <member name="P:Asa.IOModule.AIOBOX.OutputCount">
+            <summary>
+            DO总数
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.SetType(Asa.IOModule.Box_Type,System.Int32,Asa.IOModule.Box_Type,System.Int32)">
+            <summary>
+            设置输入输出的类型
+            </summary>
+            <param name="input"></param>
+            <param name="inputCount"></param>
+            <param name="output"></param>
+            <param name="outputCount"></param>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.Connect">
+            <summary>
+            连接
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.Close">
+            <summary>
+            关闭连接
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReverseStatus(Asa.IOModule.Box_Sta)">
+            <summary>
+            相反状态(ON/OFF)
+            </summary>
+            <param name="sta"></param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReverseStatus(Asa.IOModule.Box_Sta@)">
+            <summary>
+            相反状态(ON/OFF)
+            </summary>
+            <param name="sta"></param>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadDI(System.Int32)">
+            <summary>
+            读取单个DI输入状态(ON/OFF)
+            </summary>
+            <param name="add">输入地址，从0开始</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadDI(System.Int32,System.Int32)">
+            <summary>
+            读取多个DI输入状态(ON/OFF)
+            </summary>
+            <param name="add">起始地址，从0开始</param>
+            <param name="count">数量</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadAI(System.Int32)">
+            <summary>
+            读取单个AI模拟量的值
+            </summary>
+            <param name="add">模拟量地址，从0开始</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadAI(System.Int32,System.Int32)">
+            <summary>
+            读取多个AI模拟量的值
+            </summary>
+            <param name="add">起始地址，从0开始</param>
+            <param name="count">数量</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadDO(System.Int32)">
+            <summary>
+            读取单个DO输出状态(ON/OFF)
+            </summary>
+            <param name="add">输出地址，从0开始</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadDO(System.Int32,System.Int32)">
+            <summary>
+            读取多个DO输出状态(ON/OFF)
+            </summary>
+            <param name="add">起始地址，从0开始</param>
+            <param name="count">数量</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadAO(System.Int32)">
+            <summary>
+            读取单个AO模拟量的值
+            </summary>
+            <param name="add">输出地址，从0开始</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.ReadAO(System.Int32,System.Int32)">
+            <summary>
+            读取多个AO模拟量的值
+            </summary>
+            <param name="add">起始地址，从0开始</param>
+            <param name="count">数量</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.WriteDO(System.Int32,Asa.IOModule.Box_Sta)">
+            <summary>
+            写入单个DO输出状态(ON/OFF)
+            </summary>
+            <param name="add">输出地址，从0开始</param>
+            <param name="sta"></param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.GetLocalIP">
+            <summary>
+            获取本地IPv4地址
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.Send">
+            <summary>
+            发送命令线程
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.GetReadDI_Command">
+            <summary>
+            获取ReadDI的命令
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.GetReadDO_Command">
+            <summary>
+            获取ReadDO的命令
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.Listen">
+            <summary>
+            监听网络线程
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.CommandProcess(System.Byte[])">
+            <summary>
+            接收到的命令处理方法，（task多线程）
+            </summary>
+            <param name="cmd"></param>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.Reconn">
+            <summary>
+            重连线程
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.Open">
+            <summary>
+            打开socket建立连接
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.CheckIP(System.String)">
+            <summary>
+            检查IP地址
+            </summary>
+            <param name="ip"></param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.AutoIP(System.String)">
+            <summary>
+            自动获取IP地址，未连接前使用，必须在同一网段
+            </summary>
+            <param name="localIP">本地IP地址</param>
+            <returns></returns>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.GetIP">
+            <summary>
+            获取IO模块IP地址
+            </summary>
+        </member>
+        <member name="M:Asa.IOModule.AIOBOX.Command">
+            <summary>
+            命令，前7个字节
+            </summary>
+            <returns></returns>
+        </member>
+        <member name="T:Asa.IOModule.Box_Type">
+            <summary>
+            IO模块类型
+            </summary>
+        </member>
+        <member name="F:Asa.IOModule.Box_Type.DI">
+            <summary>
+            数字信号输入
+            </summary>
+        </member>
+        <member name="F:Asa.IOModule.Box_Type.DO">
+            <summary>
+            数字信号输出
+            </summary>
+        </member>
+        <member name="F:Asa.IOModule.Box_Type.AI">
+            <summary>
+            模拟量输入
+            </summary>
+        </member>
+        <member name="F:Asa.IOModule.Box_Type.AO">
+            <summary>
+            模拟量输出
+            </summary>
+        </member>
+        <member name="T:Asa.IOModule.Box_Sta">
+            <summary>
+            IO模块寄存器状态
+            </summary>
+        </member>
+        <member name="F:Asa.IOModule.Box_Sta.Off">
+            <summary>
+            断开，关闭，低电平
+            </summary>
+        </member>
+        <member name="F:Asa.IOModule.Box_Sta.On">
+            <summary>
+            闭合，打开，高电平
+            </summary>
+        </member>
+    </members>
+</doc>

source/ACSingleStore/ACSingleStore.csproj

+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{0D2542F5-DD62-4352-82D0-383D9A045E74}</ProjectGuid>
+    <OutputType>WinExe</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>OnlineStore.ACSingleStore</RootNamespace>
+    <AssemblyName>ACSingleStore</AssemblyName>
+    <TargetFrameworkVersion>v4.6.1</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <TargetFrameworkProfile />
+    <PublishUrl>publish\</PublishUrl>
+    <Install>true</Install>
+    <InstallFrom>Disk</InstallFrom>
+    <UpdateEnabled>false</UpdateEnabled>
+    <UpdateMode>Foreground</UpdateMode>
+    <UpdateInterval>7</UpdateInterval>
+    <UpdateIntervalUnits>Days</UpdateIntervalUnits>
+    <UpdatePeriodically>false</UpdatePeriodically>
+    <UpdateRequired>false</UpdateRequired>
+    <MapFileExtensions>true</MapFileExtensions>
+    <ApplicationRevision>0</ApplicationRevision>
+    <ApplicationVersion>1.0.0.%2a</ApplicationVersion>
+    <IsWebBootstrapper>false</IsWebBootstrapper>
+    <UseApplicationTrust>false</UseApplicationTrust>
+    <BootstrapperEnabled>true</BootstrapperEnabled>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <PlatformTarget>AnyCPU</PlatformTarget>
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup>
+    <ApplicationIcon>box.ico</ApplicationIcon>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="log4net">
+      <HintPath>..\..\dll\log4net.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.Configuration" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.ServiceModel" />
+    <Reference Include="System.Web.Extensions" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Deployment" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Windows.Forms" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="FormManager.cs" />
+    <Compile Include="FrmAxisDebug.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmAxisDebug.Designer.cs">
+      <DependentUpon>FrmAxisDebug.cs</DependentUpon>
+    </Compile>
+    <Compile Include="FrmBase.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmBase.Designer.cs">
+      <DependentUpon>FrmBase.cs</DependentUpon>
+    </Compile>
+    <Compile Include="FrmIOStatus.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmIOStatus.Designer.cs">
+      <DependentUpon>FrmIOStatus.cs</DependentUpon>
+    </Compile>
+    <Compile Include="FrmAbout.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmAbout.Designer.cs">
+      <DependentUpon>FrmAbout.cs</DependentUpon>
+    </Compile>
+    <Compile Include="FrmIdConfig.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmIdConfig.Designer.cs">
+      <DependentUpon>FrmIdConfig.cs</DependentUpon>
+    </Compile>
+    <Compile Include="FrmPwd.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmPwd.Designer.cs">
+      <DependentUpon>FrmPwd.cs</DependentUpon>
+    </Compile>
+    <Compile Include="FrmStore.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmStore.Designer.cs">
+      <DependentUpon>FrmStore.cs</DependentUpon>
+    </Compile>
+    <Compile Include="FrmBox.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="FrmBox.Designer.cs">
+      <DependentUpon>FrmBox.cs</DependentUpon>
+    </Compile>
+    <Compile Include="ManagerUtil.cs" />
+    <Compile Include="positionTool\FrmPositionTool.cs">
+      <SubType>Form</SubType>
+    </Compile>
+    <Compile Include="positionTool\FrmPositionTool.Designer.cs">
+      <DependentUpon>FrmPositionTool.cs</DependentUpon>
+    </Compile>
+    <Compile Include="Program.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <EmbeddedResource Include="FrmAxisDebug.resx">
+      <DependentUpon>FrmAxisDebug.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FrmBase.resx">
+      <DependentUpon>FrmBase.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FrmIOStatus.resx">
+      <DependentUpon>FrmIOStatus.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FrmAbout.resx">
+      <DependentUpon>FrmAbout.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FrmIdConfig.resx">
+      <DependentUpon>FrmIdConfig.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FrmPwd.resx">
+      <DependentUpon>FrmPwd.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FrmStore.resx">
+      <DependentUpon>FrmStore.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="FrmBox.resx">
+      <DependentUpon>FrmBox.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="positionTool\FrmPositionTool.resx">
+      <DependentUpon>FrmPositionTool.cs</DependentUpon>
+    </EmbeddedResource>
+    <EmbeddedResource Include="Properties\Resources.resx">
+      <Generator>ResXFileCodeGenerator</Generator>
+      <LastGenOutput>Resources.Designer.cs</LastGenOutput>
+      <SubType>Designer</SubType>
+    </EmbeddedResource>
+    <Compile Include="Properties\Resources.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Resources.resx</DependentUpon>
+      <DesignTime>True</DesignTime>
+    </Compile>
+    <None Include="Properties\Settings.settings">
+      <Generator>SettingsSingleFileGenerator</Generator>
+      <LastGenOutput>Settings.Designer.cs</LastGenOutput>
+    </None>
+    <Compile Include="Properties\Settings.Designer.cs">
+      <AutoGen>True</AutoGen>
+      <DependentUpon>Settings.settings</DependentUpon>
+      <DesignTimeSharedInput>True</DesignTimeSharedInput>
+    </Compile>
+  </ItemGroup>
+  <ItemGroup>
+    <None Include="App.config">
+      <SubType>Designer</SubType>
+    </None>
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="..\Common\Common.csproj">
+      <Project>{43cdd09e-fcf3-4960-a01d-3bbfe9933122}</Project>
+      <Name>Common</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\DeviceLibrary\DeviceLibrary.csproj">
+      <Project>{513bc1c9-800d-43a6-9499-3700baec3554}</Project>
+      <Name>DeviceLibrary</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\LoadCVSLibrary\LoadCSVLibrary.csproj">
+      <Project>{064bebf5-8faa-4ea2-a5f3-a06e6e7d9251}</Project>
+      <Name>LoadCSVLibrary</Name>
+    </ProjectReference>
+    <ProjectReference Include="..\UserFromControl\UserFromControl.csproj">
+      <Project>{f018462a-d9bc-4365-97f2-f6d71751641e}</Project>
+      <Name>UserFromControl</Name>
+    </ProjectReference>
+  </ItemGroup>
+  <ItemGroup>
+    <Content Include="AuToRunManager.exe">
+      <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
+    </Content>
+    <Content Include="box.ico" />
+    <Content Include="记录.txt" />
+  </ItemGroup>
+  <ItemGroup>
+    <WCFMetadata Include="Connected Services\" />
+  </ItemGroup>
+  <ItemGroup>
+    <BootstrapperPackage Include=".NETFramework,Version=v4.6.1">
+      <Visible>False</Visible>
+      <ProductName>Microsoft .NET Framework 4.6.1 %28x86 和 x64%29</ProductName>
+      <Install>true</Install>
+    </BootstrapperPackage>
+    <BootstrapperPackage Include="Microsoft.Net.Framework.3.5.SP1">
+      <Visible>False</Visible>
+      <ProductName>.NET Framework 3.5 SP1</ProductName>
+      <Install>false</Install>
+    </BootstrapperPackage>
+  </ItemGroup>
+  <ItemGroup>
+    <Folder Include="userControl\" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>
\ No newline at end of file

source/ACSingleStore/App.config

+<?xml version="1.0"?>
+<configuration>
+  <configSections>
+    <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net" />
+  </configSections>
+  <appSettings>
+    <!--是否开机自动启动料仓-->
+    <add key="App_AutoRun" value="1" />
+    <add key="App_Title" value="AC_SA_料仓_左侧" />
+    <!--   开始吹气的判断值（配置值=服务器发送的湿度值-开始吹气值）-->
+    <add key="StartBlowValue" value="4" />
+    <!--   停止吹气的判断值（配置值=服务器发送的湿度值-停止吹气值）-->
+    <add key="StopBlowValue" value="4" />
+    <!--Server address-->
+    <add key="http.server" value="http://192.168.101.11/myproject/" />
+    <!--storeType-->
+    <add key="store_count" value="2" />
+    <!--start one store config-->
+    <add key="Store_Position_Config" value="\StoreConfig\AC\linePositions.csv" />
+    <add key="Store_ConfigPath" value="\StoreConfig\AC\StoreConfig.csv" />
+    <add key="Box_ConfigPath" value="\StoreConfig\AC\BoxConfig.csv" />
+    <add key="Store_Type" value="RC_AC_SA" />
+    <add key="Store_CID" value="line-ac1" />
+    <add key="Store_CID_1" value="line-ac-01" />
+    <add key="Store_CID_2" value="line-ac-02" />
+    <add key="Store_ID" value="7" />
+    <!--end one store config-->
+    <add key="ACBaudRate" value="115200" />
+    <add key="InOutDefaultPosition" value="8000" />
+    <add key="Config_Pwd" value="123456" />
+    <!--出库等待料盘拿走的时间，秒-->
+    <add key="OutStoreWaitSeconds" value="10" />
+    <!--温控器类型，0=壁挂王字壳温湿度变送器，1=妙昕温湿度记录仪-->
+    <add key="HumitureControllerType" value="0" />
+    <add key="UseAIOBOX" value="1" />
+    <!--流水线地址和端口配置-->
+    <add key="LineServerIp" value="192.168.8.108" />
+    <add key="LineServerPort" value="5246" />
+    <!--是否调试状态-->
+    <add key="IsInDebug" value="1" />
+    <add key="ClientSettingsProvider.ServiceUri" value="" />
+  </appSettings>
+  <log4net>
+    <appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender">
+      <file type="log4net.Util.PatternString" value="logs/Store-%property{fname}.log" />
+      <param name="Encoding" value="UTF-8" />
+      <appendToFile value="true" />
+      <rollingStyle value="Date" />
+      <datePattern value="yyyy-MM-dd" />
+      <layout type="log4net.Layout.PatternLayout">
+        <conversionPattern value="[%date][%t]%-5p %m%n" />
+      </layout>
+    </appender>
+    <root>
+      <level value="Info" />
+      <appender-ref ref="RollingLogFileAppender" />
+    </root>
+  </log4net>
+  <startup>
+    <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1" />
+  </startup>
+  <system.web>
+    <membership defaultProvider="ClientAuthenticationMembershipProvider">
+      <providers>
+        <add name="ClientAuthenticationMembershipProvider" type="System.Web.ClientServices.Providers.ClientFormsAuthenticationMembershipProvider, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" serviceUri="" />
+      </providers>
+    </membership>
+    <roleManager defaultProvider="ClientRoleProvider" enabled="true">
+      <providers>
+        <add name="ClientRoleProvider" type="System.Web.ClientServices.Providers.ClientRoleProvider, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" serviceUri="" cacheTimeout="86400" />
+      </providers>
+    </roleManager>
+  </system.web>
+</configuration>
\ No newline at end of file

source/ACSingleStore/FormManager.cs

+using OnlineStore.DeviceLibrary;
+using System;
+using System.Collections.Generic;
+using System.Drawing;
+using System.IO;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace OnlineStore.ACSingleStore
+{
+   public class FormManager
+    {
+
+
+        //#03A9F4
+        //public static Color buttonColor = System.Drawing.Color.FromArgb(((int)(((byte)(128)))), ((int)(((byte)(128)))), ((int)(((byte)(255)))));
+        //public static Color buttonColor = System.Drawing.SystemColors.ActiveCaption;
+        //public static Color buttonColor = System.Drawing.Color.FromArgb(((int)((0x00))), ((int)((0x66))), ((int)(0xFF)));
+        //private static string skinFileName = Application.StartupPath + @"\Skins\Wave.ssk";
+        //private static string skinFileName = Application.StartupPath + @"\Skins\DiamondBlue.ssk";
+
+        //public static string SkinFileName
+        //{
+        //    set
+        //    {
+        //    }
+        //    get
+        //    {
+        //        if (SkinsList.Count <= 0)
+        //        {
+        //            SkinsList = GetSkinList();
+        //        }
+        //        if (SkinsList.Count > 0 && index >= 0)
+        //        {
+        //            return SkinsList[index];
+        //        }
+        //        return skinFileName;
+        //    }
+        //}
+        //private static int index = -1;
+        //public static void DefaultSkin()
+        //{
+        //    index = -1;
+        //}
+        //public static void NextSkin()
+        //{
+        //    index++;
+        //    if (index >= SkinsList.Count)
+        //    {
+        //        index = 0;
+        //    }
+        //}
+        //public static List<string> SkinsList = new List<string>();
+        //private static List<string> GetSkinList()
+        //{
+        //    List<string> returnList = new System.Collections.Generic.List<string>();
+        //    string[] fileList = Directory.GetFiles(Application.StartupPath + @"\Skins");
+        //    foreach (string sr in fileList)
+        //    {
+        //        if (sr.Contains(".ssk"))
+        //        {
+        //            returnList.Add(sr);
+        //        }
+        //    }
+        //    return returnList;
+        //}
+         
+
+        private static FrmAxisDebug debug = null;
+        public static void ShowAxisDebug(BoxBean store)
+        {
+            if (debug == null)
+            {
+                debug = new FrmAxisDebug(store);
+                debug.Show();
+            }
+            else
+            { 
+                if (debug.IsDisposed)
+                {
+                    debug = new FrmAxisDebug(store);
+                    debug.Show();
+                }
+                else
+                {
+                    debug.Activate();
+                }
+            }
+        }
+        private static FrmIOStatus frmIo = null;
+        public static void ShowIOShow(BoxBean store)
+        {
+            if (frmIo == null)
+            {
+                frmIo = new FrmIOStatus(store);
+                frmIo.Show();
+            }
+            else
+            {
+                if (frmIo.IsDisposed)
+                {
+                    frmIo = new FrmIOStatus(store);
+                    frmIo.Show();
+                }
+                else
+                {
+                    frmIo.Activate();
+                }
+            }
+        }
+    }
+}

source/ACSingleStore/FrmAbout.Designer.cs

+namespace OnlineStore.ACSingleStore
+{
+    partial class FrmAbout
+    {
+        /// <summary>
+        /// Required designer variable.
+        /// </summary>
+        private System.ComponentModel.IContainer components = null;
+
+        /// <summary>
+        /// Clean up any resources being used.
+        /// </summary>
+        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+        protected override void Dispose(bool disposing)
+        {
+            if (disposing && (components != null))
+            {
+                components.Dispose();
+            }
+            base.Dispose(disposing);
+        }
+
+        #region Windows Form Designer generated code
+
+        /// <summary>
+        /// Required method for Designer support - do not modify
+        /// the contents of this method with the code editor.
+        /// </summary>
+        private void InitializeComponent()
+        {
+            this.btnNext = new System.Windows.Forms.Button();
+            this.btnCopy = new System.Windows.Forms.Button();
+            this.lblCodeName = new System.Windows.Forms.Label();
+            this.lblTime = new System.Windows.Forms.Label();
+            this.lblVersion = new System.Windows.Forms.Label();
+            this.SuspendLayout();
+            // 
+            // btnNext
+            // 
+            this.btnNext.Anchor = System.Windows.Forms.AnchorStyles.Top;
+            this.btnNext.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
+            this.btnNext.Font = new System.Drawing.Font("微软雅黑", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.btnNext.Location = new System.Drawing.Point(210, 175);
+            this.btnNext.Name = "btnNext";
+            this.btnNext.Size = new System.Drawing.Size(120, 45);
+            this.btnNext.TabIndex = 275;
+            this.btnNext.Text = "确定";
+            this.btnNext.UseVisualStyleBackColor = false;
+            this.btnNext.Click += new System.EventHandler(this.btnNext_Click);
+            // 
+            // btnCopy
+            // 
+            this.btnCopy.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
+            this.btnCopy.Location = new System.Drawing.Point(465, 78);
+            this.btnCopy.Name = "btnCopy";
+            this.btnCopy.Size = new System.Drawing.Size(75, 25);
+            this.btnCopy.TabIndex = 283;
+            this.btnCopy.Text = "复制编号";
+            this.btnCopy.UseVisualStyleBackColor = true;
+            this.btnCopy.Click += new System.EventHandler(this.btnCopy_Click);
+            // 
+            // lblCodeName
+            // 
+            this.lblCodeName.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Left) 
+            | System.Windows.Forms.AnchorStyles.Right)));
+            this.lblCodeName.Location = new System.Drawing.Point(11, 114);
+            this.lblCodeName.Name = "lblCodeName";
+            this.lblCodeName.Size = new System.Drawing.Size(529, 23);
+            this.lblCodeName.TabIndex = 282;
+            this.lblCodeName.Text = "软件编号：43 6F 64 65 4C 69 62 72 61 72 79 50 72 6F 6A 65 63 74 ";
+            this.lblCodeName.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+            // 
+            // lblTime
+            // 
+            this.lblTime.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Left) 
+            | System.Windows.Forms.AnchorStyles.Right)));
+            this.lblTime.Location = new System.Drawing.Point(80, 80);
+            this.lblTime.Name = "lblTime";
+            this.lblTime.Size = new System.Drawing.Size(379, 23);
+            this.lblTime.TabIndex = 281;
+            this.lblTime.Text = "更新时间：0000-00-00 00:00:00";
+            this.lblTime.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+            // 
+            // lblVersion
+            // 
+            this.lblVersion.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Left) 
+            | System.Windows.Forms.AnchorStyles.Right)));
+            this.lblVersion.Location = new System.Drawing.Point(11, 50);
+            this.lblVersion.Name = "lblVersion";
+            this.lblVersion.Size = new System.Drawing.Size(529, 23);
+            this.lblVersion.TabIndex = 280;
+            this.lblVersion.Text = "版本号：1.1.0000.0000";
+            this.lblVersion.TextAlign = System.Drawing.ContentAlignment.MiddleCenter;
+            // 
+            // FrmAbout
+            // 
+            this.AutoScaleDimensions = new System.Drawing.SizeF(7F, 17F);
+            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+            this.ClientSize = new System.Drawing.Size(564, 250);
+            this.Controls.Add(this.btnCopy);
+            this.Controls.Add(this.lblCodeName);
+            this.Controls.Add(this.lblTime);
+            this.Controls.Add(this.lblVersion);
+            this.Controls.Add(this.btnNext);
+            this.MaximizeBox = false;
+            this.MinimizeBox = false;
+            this.Name = "FrmAbout";
+            this.Text = "软件信息";
+            this.Load += new System.EventHandler(this.FrmPwd_Load);
+            this.ResumeLayout(false);
+
+        }
+
+        #endregion
+        private System.Windows.Forms.Button btnNext;
+        private System.Windows.Forms.Button btnCopy;
+        private System.Windows.Forms.Label lblCodeName;
+        private System.Windows.Forms.Label lblTime;
+        private System.Windows.Forms.Label lblVersion;
+    }
+}
\ No newline at end of file

source/ACSingleStore/FrmAbout.cs

+
+using OnlineStore.Common;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Drawing;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace OnlineStore.ACSingleStore
+{
+    public partial class FrmAbout : FrmBase
+    { 
+        public FrmAbout( )
+        { 
+            InitializeComponent();
+        }
+
+        private void FrmPwd_Load(object sender, EventArgs e)
+        {
+            this.DialogResult = DialogResult.None;
+            lblTime.Text = "更新时间：" + GetVersion();
+            lblVersion.Text = "版本号："+ System.Reflection.Assembly.GetExecutingAssembly().GetName().Version.ToString();
+            lblCodeName.Text ="软件编号："+ GetCodeNum();
+        }
+
+        private void btnNext_Click(object sender, EventArgs e)
+        { 
+                this.Close(); 
+        }
+
+        private void btnCopy_Click(object sender, EventArgs e)
+        {
+            Clipboard.SetDataObject(GetCodeNum(), true);
+        }
+    }
+}

source/ACSingleStore/FrmAbout.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file

source/ACSingleStore/FrmBase.Designer.cs

+namespace OnlineStore.ACSingleStore
+{
+    partial class FrmBase
+    {
+        /// <summary>
+        /// Required designer variable.
+        /// </summary>
+        private System.ComponentModel.IContainer components = null;
+
+        /// <summary>
+        /// Clean up any resources being used.
+        /// </summary>
+        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+        protected override void Dispose(bool disposing)
+        {
+            if (disposing && (components != null))
+            {
+                components.Dispose();
+            }
+            base.Dispose(disposing);
+        }
+
+        #region Windows Form Designer generated code
+
+        /// <summary>
+        /// Required method for Designer support - do not modify
+        /// the contents of this method with the code editor.
+        /// </summary>
+        private void InitializeComponent()
+        {
+            System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(FrmBase));
+            this.SuspendLayout();
+            // 
+            // FrmBase
+            // 
+            this.AutoScaleDimensions = new System.Drawing.SizeF(96F, 96F);
+            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Dpi;
+            this.BackColor = System.Drawing.Color.White;
+            this.ClientSize = new System.Drawing.Size(300, 300);
+            this.Font = new System.Drawing.Font("微软雅黑", 9F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
+            this.Name = "FrmBase";
+            this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
+            this.Text = "FrmBase";
+            this.ResumeLayout(false);
+
+        }
+
+        #endregion
+         
+    }
+}
\ No newline at end of file

source/ACSingleStore/FrmBase.cs

+using OnlineStore.Common;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Drawing;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace OnlineStore.ACSingleStore
+{
+    public partial class FrmBase : Form
+    {
+        internal static string GetVersion(bool isShow=false)
+        {
+            string str = "";
+            string version = "";
+            DateTime newData = DateTime.Parse("2000-01-01");
+            try
+            {
+                System.Reflection.AssemblyName assemblyName = System.Reflection.Assembly.GetExecutingAssembly().GetName();
+                version = assemblyName.Version.ToString();
+                string[] strArray = version.Split('.');
+                if (strArray.Length.Equals(4))
+                {
+                    int days = Convert.ToInt32(strArray[2]);
+                    int seconds = Convert.ToInt32(strArray[3]);
+                    DateTime d1 = DateTime.Parse("2000-01-01");
+                    newData = d1.AddDays(days);
+                    newData = newData.AddSeconds(seconds * 2);
+                    str = newData.ToString("yyyy-MM-dd HH:mm");
+                }
+            }
+            catch (Exception ex)
+            {
+                str = version;
+                LogUtil.error("解析版本号【" + str + "】出错：" + ex.ToString());
+            }
+            if (isShow)
+            {
+                LogUtil.info("版本号[" + version + "][" + str + "][" + GetCodeNum() + "]");
+            }
+            return str;
+        }
+        internal static string GetCodeNum(string codeName = "RC1250-ACSingleStore")
+        {
+            byte[] byteArray = System.Text.Encoding.ASCII.GetBytes(codeName);
+            string result = "";
+            result = AcSerialBean.ByteToString(byteArray);
+            return result;
+        }
+        public FrmBase()
+        {
+            InitializeComponent();
+            //skinEngine1.SkinAllForm = false;
+        }
+       
+    }
+}

source/ACSingleStore/FrmIDConfig.cs

+
+using OnlineStore.Common;
+using OnlineStore.DeviceLibrary;
+using OnlineStore.LoadCSVLibrary;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Drawing;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace OnlineStore.ACSingleStore
+{
+    public partial class FrmIdConfig : FrmBase
+    {
+        public delegate void PwdOK(int type);
+        public event PwdOK PwdOKFun;
+        private int StoreId = 0;
+        public FrmIdConfig()
+        {
+            //StoreId = storeId;
+            InitializeComponent();
+        }
+
+        private void FrmPwd_Load(object sender, EventArgs e)
+        {
+            LoadData();
+        }
+
+        private void LoadData()
+        {
+            this.DialogResult = DialogResult.None;
+            txthttpAddr.Text = ConfigAppSettings.GetValue(Setting_Init.http_server);
+            txtLineAddr.Text = ConfigAppSettings.GetValue(Setting_Init.LineServerIp);
+            cmbId.Items.Clear();
+            for (int i = 1; i <= 12; i++)
+            {
+                cmbId.Items.Add("D"+i);
+
+            }
+            if (StoreId > 0 && StoreId <= cmbId.Items.Count)
+            {
+                cmbId.SelectedIndex = StoreId - 1;
+            }
+            chbDebug.Checked = StoreManager.Store.IsDebug;
+
+            LoadPos();
+        }
+
+         private List<string> allList1 = new List<string>();
+        private List<string> allList2 = new List<string>();
+        private void LoadPos()
+        {
+            allList1 = new List<string>(StoreManager.Store.BoxMap[1].PositionNumList);
+            allList1.Insert(0, " ---暂无--- ");
+            LoadLocationCom(1, 7, cmbPosition7, allList1);
+            LoadLocationCom(1, 11, cmbPosition11, allList1);
+            LoadLocationCom(1, 13, cmbPosition13, allList1);
+            LoadLocationCom(1, 15, cmbPosition15, allList1);
+            allList2 = new List<string>(StoreManager.Store.BoxMap[2].PositionNumList);
+            allList2.Insert(0, " ---暂无--- ");
+            LoadLocationCom(2, 7, cmbBox2_7, allList2);
+            LoadLocationCom(2, 11, cmbBox2_11, allList2);
+            LoadLocationCom(2, 13, cmbBox2_13, allList2);
+            LoadLocationCom(2, 15, cmbBox2_15, allList2);
+        }
+
+        private void LoadLocationCom(int storeId,int width,ComboBox com,List<string> allList)
+        {
+            com.DataSource =new List<string>( allList);
+            string posId = StoreManager.GetLocationPosId(storeId, width);
+            int index = allList.IndexOf(posId);
+            if (index >0)
+            {
+                com.SelectedIndex = index;
+            }
+            else
+            {
+                com.SelectedIndex = 0; 
+            }
+            foreach(string str in allList)
+            { 
+                com.AutoCompleteCustomSource.Add(str);
+            }
+            com.AutoCompleteSource = AutoCompleteSource.CustomSource;
+        }
+
+        private void btnNext_Click(object sender, EventArgs e)
+        {
+           
+        }
+
+        private void btnBack_Click(object sender, EventArgs e)
+        {
+            this.DialogResult = DialogResult.Cancel;
+            this.Close();
+        }
+
+        private void FrmPwd_KeyDown(object sender, KeyEventArgs e)
+        {
+            if (e.KeyCode.Equals(Keys.Enter))
+            {
+                btnNext_Click(null, null);
+            }
+        }
+
+        private void txtPwd_KeyDown(object sender, KeyEventArgs e)
+        { 
+            if (e.KeyCode.Equals(Keys.Enter))
+            {
+                btnNext_Click(null, null);
+            }else if (e.KeyCode.Equals(Keys.Escape))
+            {
+                btnBack_Click(null, null);
+            }
+        }
+
+        private void FrmPwd_Shown(object sender, EventArgs e)
+        { 
+
+        }
+
+        private void btnReset_Click(object sender, EventArgs e)
+        {
+            txthttpAddr.Text = "http://192.168.101.11/myproject/";
+            txtLineAddr.Text = "192.168.101.10";
+        }
+
+        private void cmbPosition7_MouseLeave(object sender, EventArgs e)
+        {
+            try
+            {
+                ComboBox box = (ComboBox)sender;
+                string value = box.Text;
+                if (allList1.Contains(value.Trim()))
+                {
+
+                }
+                else
+                {
+                    box.Text = allList1[0];
+                }
+            }
+            catch (Exception ex)
+            {
+                LogUtil.error("cmbPosition7_MouseLeave 出错：" + ex.ToString());
+            }
+        }
+
+        private void btnSavePosID_Click(object sender, EventArgs e)
+        {
+        }
+
+        private void SaveP(int storeId, ComboBox box, int width)
+        {
+            if (storeId.Equals(1))
+            {
+                string value = box.Text;
+                if (!allList1.Contains(value))
+                {
+                    box.Text = allList1[0];
+                    value = allList1[0];
+                }
+                if (value.Equals(allList1[0]))
+                {
+                    value = "";
+                }
+                ConfigAppSettings.SaveValue(Setting_Init.Location_PosID_ + storeId + "_" + width, value);
+            }
+            else if (storeId.Equals(2))
+            {
+                string value = box.Text;
+                if (!allList2.Contains(value))
+                {
+                    box.Text = allList2[0];
+                    value = allList2[0];
+                }
+                if (value.Equals(allList2[0]))
+                {
+                    value = "";
+                }
+                ConfigAppSettings.SaveValue(Setting_Init.Location_PosID_ + storeId + "_" + width, value);
+            }
+        }
+
+        private void cmbId_SelectedIndexChanged(object sender, EventArgs e)
+        {
+
+        }
+
+        private void SaveConfig()
+        {
+            int index = cmbId.SelectedIndex + 1;
+            DialogResult result = MessageBox.Show("更改料仓编号为[" + index + "],需要重启客户端", "确认提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Asterisk);
+            if (result.Equals(DialogResult.OK))
+            {
+                //  < add key = "Store_CID" value = "line-ac-01" />
+                //  <add key ="Store_ID" value ="1"/>
+                string storeCID = "line-ac-" + index.ToString().PadLeft(2, '0');
+                string storeId = index.ToString();
+                ConfigAppSettings.SaveValue(Setting_Init.Store_CID, storeCID);
+                ConfigAppSettings.SaveValue(Setting_Init.Store_ID, storeId);
+                //如果总配置文件存在，保存到总的配置文件
+                string filePath = Application.StartupPath + ConfigAppSettings.GetValue(Setting_Init.Store_Position_Config);
+                LoadCSVLibrary.CSVPositionReader<ACStorePosition>.UpdatePostion(filePath, index);
+
+                string httpstr = txthttpAddr.Text.Trim();
+                ConfigAppSettings.SaveValue(Setting_Init.http_server, httpstr);
+                string lineStr = txtLineAddr.Text.Trim();
+                ConfigAppSettings.SaveValue(Setting_Init.LineServerIp, lineStr);
+                StoreManager.Store.IsDebug = chbDebug.Checked;
+                ConfigAppSettings.SaveValue(Setting_Init.IsInDebug, chbDebug.Checked ? 1 : 0);
+                MessageBox.Show("保存成功，请重启客户端");
+                this.DialogResult = DialogResult.OK;
+            }
+        }
+        private void SavePosition()
+        {
+
+            try
+            {
+                SaveP(1,cmbPosition7, 7);
+                SaveP(1,cmbPosition11, 11);
+                SaveP(1,cmbPosition13, 13);
+                SaveP(1,cmbPosition15, 15);
+
+                SaveP(2, cmbBox2_7, 7);
+                SaveP(2, cmbBox2_11, 11);
+                SaveP(2, cmbBox2_13, 13);
+                SaveP(2, cmbBox2_15, 15);
+                MessageBox.Show("保存定位库位成功");
+            }
+            catch (Exception ex)
+            {
+                LogUtil.error("btnSavePosID_Click 出错：" + ex.ToString());
+            }
+        }
+        private void cmbBox2_15_MouseLeave(object sender, EventArgs e)
+        {
+            try
+            {
+                ComboBox box = (ComboBox)sender;
+                string value = box.Text;
+                if (allList2.Contains(value.Trim()))
+                {
+
+                }
+                else
+                {
+                    box.Text = allList2[0];
+                }
+            }
+            catch (Exception ex)
+            {
+                LogUtil.error("cmbBox2_15_MouseLeave 出错：" + ex.ToString());
+            }
+        }
+    }
+}

source/ACSingleStore/FrmIOStatus.cs

+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Drawing;
+using System.Linq;
+using System.Text;
+using System.Windows.Forms;
+using System.Runtime.CompilerServices;
+using System.Threading;
+using System.IO;
+using System.Runtime.InteropServices;
+using OnlineStore.DeviceLibrary;
+using log4net;
+using System.Reflection;
+using UserFromControl;
+using OnlineStore.LoadCSVLibrary;
+using OnlineStore.Common;
+
+
+namespace OnlineStore.ACSingleStore
+{
+    public partial class FrmIOStatus : FrmBase
+    {
+        private int StoreId = 1;
+        private BoxBean boxBean;
+        public static readonly ILog LOGGER = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType);
+        public FrmIOStatus()
+        {
+            Control.CheckForIllegalCrossThreadCalls = false;
+            InitializeComponent();
+        }
+        public FrmIOStatus(BoxBean store)
+        {
+            Control.CheckForIllegalCrossThreadCalls = false;
+            InitializeComponent();
+
+            this.boxBean = store;
+            this.StoreId = store.DeviceID;
+            LoadIOList();
+        }
+
+        Dictionary<string, IOTextControl> DIControlList = new Dictionary<string, IOTextControl>();
+        Dictionary<string, IOTextControl> DOControlList = new Dictionary<string, IOTextControl>();
+        private void LoadIOList()
+        {
+            int roleindex = 0;
+            this.tableLayoutPanel1.RowStyles.Clear();
+            this.tableLayoutPanel1.RowCount = boxBean.Config.DIList.Count;
+            foreach (ConfigIO ioValue in boxBean.Config.DIList.Values)
+            {
+                this.tableLayoutPanel1.RowStyles.Add(new RowStyle(SizeType.Absolute, 26));
+                IOTextControl control = new IOTextControl(ioValue.ElectricalDefinition + "_" + ioValue.Explain, ioValue.ProName);
+                this.tableLayoutPanel1.Controls.Add(control, 0, roleindex);
+                roleindex++;
+                DIControlList.Add(ioValue.ProName, control);
+            }
+
+            tableLayoutPanel2.RowStyles.Clear();
+            this.tableLayoutPanel2.RowCount = boxBean.Config.DOList.Count;
+            roleindex = 0;
+            foreach (ConfigIO ioValue in boxBean.Config.DOList.Values)
+            {
+                this.tableLayoutPanel2.RowStyles.Add(new RowStyle(SizeType.Absolute, 28));
+                IOTextControl control = new IOTextControl(ioValue.ElectricalDefinition + "_" + ioValue.Explain, ioValue.ProName);
+                this.tableLayoutPanel2.Controls.Add(control, 0, roleindex);
+                roleindex++;
+                DOControlList.Add(ioValue.ProName, control);
+            }
+            this.SuspendLayout();    //此处为不闪屏，一定要有的！ 
+
+            cmbWriteIO.DataSource = new List<ConfigIO>(boxBean.Config.DOList.Values);
+            cmbWriteIO.ValueMember = "ProName";
+            cmbWriteIO.DisplayMember = "DisplayStr"; 
+        }
+
+        private void timer1_Tick(object sender, EventArgs e)
+        {
+            if (chbAutoRead.Checked)
+            {
+                ReadIOList();
+            }
+        }
+
+        private void FrmTest_FormClosing(object sender, FormClosingEventArgs e)
+        {
+            //KNDAIManager.NeedShow = false;
+            try
+            {
+                if (this.timer1.Enabled)
+                {
+                    this.timer1.Enabled = false;
+                }
+            }
+            catch (Exception ex)
+            {
+                MessageBox.Show(ex.StackTrace, "Exception(异常)", MessageBoxButtons.OK, MessageBoxIcon.Error);
+                LogUtil.error(LOGGER, ex.StackTrace);
+            }
+        }
+      
+
+        private ConfigIO GetSelectDO()
+        {
+            string text = cmbWriteIO.SelectedValue.ToString();
+            if (boxBean.Config.DOList.ContainsKey(text))
+            {
+                ConfigIO io = boxBean.Config.DOList[text];
+                return io;
+            }
+            return null;
+        }
+        IOTextControl selectControl = null;
+        private void cmbWriteIO_SelectedIndexChanged(object sender, EventArgs e)
+        {
+            if (cmbWriteIO.SelectedIndex >= 0)
+            {
+                ConfigIO io = GetSelectDO();
+                if (io != null)
+                {
+                    // txtIp.Text = io.DeviceName;
+                    txtDOIndex.Text = io.GetIOAddr().ToString();
+                    txtDoName.Text = io.IO_IP; 
+                    IOTextControl newControl = DOControlList[io.ProName];
+                    selectControl = newControl;
+                }
+            }
+        }
+
+        private void FrmStoreIOStatus_Load(object sender, EventArgs e)
+        {
+            //KNDAIManager.NeedShow = true;
+        }
+
+        private void cmbWriteIO_DrawItem(object sender, DrawItemEventArgs e)
+        {
+            if (e.Index < 0)
+            {
+                return;
+            }
+            e.DrawBackground();
+            e.DrawFocusRectangle();
+            if (cmbWriteIO.Items.Count > e.Index)
+            {
+                ConfigIO io = (ConfigIO)cmbWriteIO.Items[e.Index];
+                e.Graphics.DrawString(io.DisplayStr, e.Font, new SolidBrush(e.ForeColor), e.Bounds.X, e.Bounds.Y + 3);
+            }
+        }
+         
+
+        private void btnReadIO_Click(object sender, EventArgs e)
+        {
+            ReadIOList();
+        }
+
+        private void ReadIOList()
+        {
+            foreach (string key in DIControlList.Keys)
+            {
+                IOTextControl control = DIControlList[key];
+                int iov = (int)IOManager.IOValue(key);
+                if (iov != control.IOValue)
+                {
+                    control.IOValue = iov;
+                    control.ShowData();
+                }
+            } foreach (string key in this.DOControlList.Keys)
+            {
+                IOTextControl control = DOControlList[key];
+                int iov = (int)IOManager.DOValue(key);
+                if (iov != control.IOValue)
+                {
+                    control.IOValue = iov;
+                    control.ShowData();
+                }
+            }
+             
+        } 
+        private void btnOpenDoor_Click(object sender, EventArgs e)
+        { 
+            boxBean.OpenDoor(false);
+        } 
+        private void btnCloseDoor_Click(object sender, EventArgs e)
+        { 
+            boxBean.CloseDoor(false);
+        }
+
+        private void btnLocationUp_Click(object sender, EventArgs e)
+        {
+            IOManager.IOMove(IO_Type.LocationCylinder_Down, IO_VALUE.LOW);
+            IOManager.IOMove(IO_Type.LocationCylinder_Up, IO_VALUE.HIGH);
+        }
+
+        private void btnLocationDown_Click(object sender, EventArgs e)
+        {
+            IOManager.IOMove(IO_Type.LocationCylinder_Down, IO_VALUE.HIGH);
+            IOManager.IOMove(IO_Type.LocationCylinder_Up, IO_VALUE.LOW); 
+        }
+
+        private void FrmIOStatus_Shown(object sender, EventArgs e)
+        { 
+            timer1.Start();
+        }
+
+        private void btnOpenAxisBreak_Click(object sender, EventArgs e)
+        {
+            IOManager.IOMove(IO_Type.Axis_Brake, IO_VALUE.HIGH);
+        }
+
+        private void btnCloseAxisBreak_Click(object sender, EventArgs e)
+        { 
+            IOManager.IOMove(IO_Type.Axis_Brake, IO_VALUE.LOW);
+        }
+
+        private void button1_Click(object sender, EventArgs e)
+        {
+            this.Close();
+        }
+
+        private void btnOpenDo_Click(object sender, EventArgs e)
+        {
+            WriteDO(IO_VALUE.HIGH);
+        }
+        private void btnWriteSingleDO_Click(object sender, EventArgs e)
+        {
+            WriteDO(IO_VALUE.LOW);
+        }
+        private void WriteDO(IO_VALUE value)
+        {
+            string deviceName = txtDoName.Text;
+            int index = FormUtil.GetIntValue(txtDOIndex);
+            //   IO_VALUE value = checkBox1.Checked ? IO_VALUE.HIGH : IO_VALUE.LOW;
+            int time = FormUtil.GetIntValue(txtWriteTime);
+            int slaveId = 0;
+            if (time > 0)
+            {
+                IOManager.instance.WriteSingleDO(deviceName, (byte)slaveId, (ushort)index, (IO_VALUE)value, time);
+            }
+            else
+            {
+                IOManager.instance.WriteSingleDO(deviceName, (byte)slaveId, (ushort)index, (IO_VALUE)value);
+            }
+        }
+    }
+}

source/ACSingleStore/FrmIOStatus.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <metadata name="timer1.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>17, 11</value>
+  </metadata>
+  <metadata name="$this.TrayHeight" type="System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089">
+    <value>25</value>
+  </metadata>
+</root>
\ No newline at end of file

source/ACSingleStore/FrmIdConfig.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file

source/ACSingleStore/FrmPwd.Designer.cs

+namespace OnlineStore.ACSingleStore
+{
+    partial class FrmPwd
+    {
+        /// <summary>
+        /// Required designer variable.
+        /// </summary>
+        private System.ComponentModel.IContainer components = null;
+
+        /// <summary>
+        /// Clean up any resources being used.
+        /// </summary>
+        /// <param name="disposing">true if managed resources should be disposed; otherwise, false.</param>
+        protected override void Dispose(bool disposing)
+        {
+            if (disposing && (components != null))
+            {
+                components.Dispose();
+            }
+            base.Dispose(disposing);
+        }
+
+        #region Windows Form Designer generated code
+
+        /// <summary>
+        /// Required method for Designer support - do not modify
+        /// the contents of this method with the code editor.
+        /// </summary>
+        private void InitializeComponent()
+        {
+            this.label1 = new System.Windows.Forms.Label();
+            this.btnNext = new System.Windows.Forms.Button();
+            this.btnBack = new System.Windows.Forms.Button();
+            this.txtPwd = new System.Windows.Forms.TextBox();
+            this.SuspendLayout();
+            // 
+            // label1
+            // 
+            this.label1.AutoSize = true;
+            this.label1.Font = new System.Drawing.Font("微软雅黑", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.label1.Location = new System.Drawing.Point(153, 61);
+            this.label1.Name = "label1";
+            this.label1.Size = new System.Drawing.Size(126, 25);
+            this.label1.TabIndex = 0;
+            this.label1.Text = "请输入密码：";
+            // 
+            // btnNext
+            // 
+            this.btnNext.Anchor = System.Windows.Forms.AnchorStyles.Top;
+            this.btnNext.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
+            this.btnNext.Font = new System.Drawing.Font("微软雅黑", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.btnNext.Location = new System.Drawing.Point(221, 163);
+            this.btnNext.Name = "btnNext";
+            this.btnNext.Size = new System.Drawing.Size(120, 45);
+            this.btnNext.TabIndex = 275;
+            this.btnNext.Text = "确定";
+            this.btnNext.UseVisualStyleBackColor = false;
+            this.btnNext.Click += new System.EventHandler(this.btnNext_Click);
+            // 
+            // btnBack
+            // 
+            this.btnBack.Anchor = System.Windows.Forms.AnchorStyles.Top;
+            this.btnBack.FlatStyle = System.Windows.Forms.FlatStyle.Flat;
+            this.btnBack.Font = new System.Drawing.Font("微软雅黑", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.btnBack.Location = new System.Drawing.Point(95, 163);
+            this.btnBack.Name = "btnBack";
+            this.btnBack.Size = new System.Drawing.Size(120, 45);
+            this.btnBack.TabIndex = 274;
+            this.btnBack.Text = "返回";
+            this.btnBack.UseVisualStyleBackColor = false;
+            this.btnBack.Click += new System.EventHandler(this.btnBack_Click);
+            // 
+            // txtPwd
+            // 
+            this.txtPwd.Font = new System.Drawing.Font("微软雅黑", 14.25F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(134)));
+            this.txtPwd.Location = new System.Drawing.Point(112, 97);
+            this.txtPwd.Name = "txtPwd";
+            this.txtPwd.PasswordChar = '*';
+            this.txtPwd.Size = new System.Drawing.Size(215, 33);
+            this.txtPwd.TabIndex = 276;
+            this.txtPwd.Text = "123456";
+            this.txtPwd.KeyDown += new System.Windows.Forms.KeyEventHandler(this.txtPwd_KeyDown);
+            // 
+            // FrmPwd
+            // 
+            this.AutoScaleDimensions = new System.Drawing.SizeF(7F, 17F);
+            this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
+            this.ClientSize = new System.Drawing.Size(437, 268);
+            this.Controls.Add(this.txtPwd);
+            this.Controls.Add(this.btnNext);
+            this.Controls.Add(this.btnBack);
+            this.Controls.Add(this.label1);
+            this.Name = "FrmPwd";
+            this.Text = "请输入密码";
+            this.Load += new System.EventHandler(this.FrmPwd_Load);
+            this.Shown += new System.EventHandler(this.FrmPwd_Shown);
+            this.KeyDown += new System.Windows.Forms.KeyEventHandler(this.FrmPwd_KeyDown);
+            this.ResumeLayout(false);
+            this.PerformLayout();
+
+        }
+
+        #endregion
+
+        private System.Windows.Forms.Label label1;
+        private System.Windows.Forms.Button btnNext;
+        private System.Windows.Forms.Button btnBack;
+        private System.Windows.Forms.TextBox txtPwd;
+    }
+}
\ No newline at end of file

source/ACSingleStore/FrmPwd.cs

+
+using OnlineStore.Common;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Drawing;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace OnlineStore.ACSingleStore
+{
+    public partial class FrmPwd : FrmBase
+    {
+        public delegate void PwdOK(int type);
+        public event PwdOK PwdOKFun;
+        private int OpenType = 0;
+        public FrmPwd(int type)
+        {
+            OpenType = type;
+            InitializeComponent();
+        }
+
+        private void FrmPwd_Load(object sender, EventArgs e)
+        {
+            this.DialogResult = DialogResult.None;
+        }
+
+        private void btnNext_Click(object sender, EventArgs e)
+        {
+            string pwd = txtPwd.Text;
+            string configPwd = ConfigAppSettings.GetValue(Setting_Init.Config_Pwd);
+            if (configPwd.Equals(""))
+            {
+                configPwd = "123456";
+                ConfigAppSettings.SaveValue(Setting_Init.Config_Pwd,configPwd);
+            }
+            if (pwd.Equals(configPwd))
+            {
+                this.DialogResult = DialogResult.OK;
+                //if (OpenType.Equals(1))
+                //{
+                //    FrmDebugMenu main = new FrmDebugMenu();
+                //    main.ShowDialog();
+                //}
+                //else if (OpenType.Equals(2))
+                //{ 
+                //    FrmProgramList board = new FrmProgramList();
+                //    board.ShowDialog();
+                //}
+                //else if (OpenType.Equals(3))
+                //{
+                //    FrmBoardList board = new FrmBoardList();
+                //    board.ShowDialog();
+                //}
+                PwdOKFun?.Invoke(OpenType);
+                this.DialogResult = DialogResult.OK;
+                this.Close();
+
+            }
+            else
+            {
+               // this.DialogResult = DialogResult.No;
+                MessageBox.Show("请输入正确的密码");
+                txtPwd.Focus();
+            }
+        }
+
+        private void btnBack_Click(object sender, EventArgs e)
+        {
+            this.DialogResult = DialogResult.Cancel;
+            this.Close();
+        }
+
+        private void FrmPwd_KeyDown(object sender, KeyEventArgs e)
+        {
+            if (e.KeyCode.Equals(Keys.Enter))
+            {
+                btnNext_Click(null, null);
+            }
+        }
+
+        private void txtPwd_KeyDown(object sender, KeyEventArgs e)
+        { 
+            if (e.KeyCode.Equals(Keys.Enter))
+            {
+                btnNext_Click(null, null);
+            }else if (e.KeyCode.Equals(Keys.Escape))
+            {
+                btnBack_Click(null, null);
+            }
+        }
+
+        private void FrmPwd_Shown(object sender, EventArgs e)
+        {
+            txtPwd.Focus();
+
+        }
+    }
+}

source/ACSingleStore/FrmPwd.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file

source/ACSingleStore/ManagerUtil.cs

+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Windows;
+using System.Windows.Forms;
+
+namespace OnlineStore.ACSingleStore
+{
+    public class ManagerUtil
+    {
+        public static void AutoRun(string strName, bool value)
+        {
+            try
+            {
+                //创建启动对象 
+                System.Diagnostics.ProcessStartInfo startInfo = new System.Diagnostics.ProcessStartInfo();
+                //设置运行文件
+                startInfo.FileName = System.Windows.Forms.Application.StartupPath + "\\AuToRunManager.exe";
+                //设置启动参数 
+                startInfo.Arguments = String.Join(" ", new string[2] { strName, value.ToString() });
+                //设置启动动作,确保以管理员身份运行
+                startInfo.Verb = "runas";
+                //如果不是管理员，则启动UAC 
+                System.Diagnostics.Process.Start(startInfo);
+            }
+            catch (Exception ex)
+            {
+                MessageBox.Show(ex.ToString());
+            }
+        } 
+    }
+}

source/ACSingleStore/Program.cs

+using log4net;
+using log4net.Config;
+using OnlineStore.Common;
+using OnlineStore.ACSingleStore;
+using System;
+using System.Collections.Generic;
+using System.Diagnostics;
+using System.Linq;
+using System.Runtime.InteropServices;
+using System.Threading.Tasks;
+using System.Windows.Forms;
+
+namespace OnlineStore.ACSingleStore
+{
+    static class Program
+    {
+        #region 方法四：使用的Win32函数的声明
+
+        /// <summary>
+        /// 找到某个窗口与给出的类别名和窗口名相同窗口 
+        /// </summary>
+        /// <param name="lpClassName">类别名</param>
+        /// <param name="lpWindowName">窗口名</param>
+        /// <returns>成功找到返回窗口句柄,否则返回null</returns>
+        [DllImport("user32.dll")]
+        public static extern IntPtr FindWindow(string lpClassName, string lpWindowName);
+
+        /// <summary>
+        /// 切换到窗口并把窗口设入前台,类似 SetForegroundWindow方法的功能
+        /// </summary>
+        /// <param name="hWnd">窗口句柄</param>
+        /// <param name="fAltTab">True代表窗口正在通过Alt/Ctrl +Tab被切换</param>
+        [DllImport("user32.dll ", SetLastError = true)]
+        static extern void SwitchToThisWindow(IntPtr hWnd, bool fAltTab);
+
+        /// <summary>
+        ///  设置窗口的显示状态 
+        /// </summary>
+        /// <param name="hWnd">窗口句柄</param>
+        /// <param name="cmdShow">指示窗口如何被显示</param>
+        /// <returns>如果窗体之前是可见，返回值为非零；如果窗体之前被隐藏，返回值为零</returns>
+        [DllImport("user32.dll", EntryPoint = "ShowWindow", CharSet = CharSet.Auto)]
+        public static extern int ShowWindow(IntPtr hwnd, int nCmdShow);
+        public const int SW_RESTORE = 9;
+        public static IntPtr formhwnd;
+        public static readonly ILog LOGGER = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
+
+        #endregion
+
+        /// <summary>
+        /// 应用程序的主入口点。
+        /// </summary>
+        [STAThread]
+        static void Main(string[] Args)
+        {
+            Application.ThreadException += new System.Threading.ThreadExceptionEventHandler(Application_ThreadException);
+            AppDomain.CurrentDomain.UnhandledException += new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);
+
+            // 因为方法三只能是最小化的窗体显示出来，如果隐藏到托盘中则不能把运行的程序显示出来 
+            Process currentproc = Process.GetCurrentProcess();
+            Process[] processcollection = Process.GetProcessesByName(currentproc.ProcessName.Replace(".vshost", string.Empty));
+            //  该程序已经运行，
+
+            bool isShow = false;
+            if (processcollection.Length >= 1)
+            {
+                foreach (Process process in processcollection)
+                {
+                    if (process.Id != currentproc.Id)
+                    {
+                        // 如果进程的句柄为0，即代表没有找到该窗体，即该窗体隐藏的情况时
+                        if (process.MainWindowHandle.ToInt32().Equals(0))
+                        {
+                            string formTitle = ConfigAppSettings.GetValue(Setting_Init.App_Title);
+                            // 获得窗体句柄
+                            formhwnd = FindWindow(null, formTitle);
+                            // 重新显示该窗体并切换到带入到前台
+                            ShowWindow(formhwnd, SW_RESTORE);
+                            SwitchToThisWindow(formhwnd, true);
+                            isShow = true;
+                            break;
+                        }
+                        else
+                        {
+                            // 如果窗体没有隐藏，就直接切换到该窗体并带入到前台
+                            // 因为窗体除了隐藏到托盘，还可以最小化
+                            SwitchToThisWindow(process.MainWindowHandle, true);
+                            isShow = true;
+                            break;
+                        }
+                    }
+                }
+            }
+
+            if (!isShow)
+            {
+                log4net.GlobalContext.Properties["fname"] = ConfigAppSettings.GetValue(Setting_Init.Store_CID);
+                log4net.Config.XmlConfigurator.Configure();
+                System.Net.ServicePointManager.DefaultConnectionLimit = 512;
+                // XmlConfigurator.Configure(); 
+                Application.EnableVisualStyles();
+                Application.SetCompatibleTextRenderingDefault(false);
+                Application.Run(new FrmStore());
+            }
+            return;
+
+            if (!isShow)
+            {
+                //获得当前登录的Windows用户标示
+                System.Security.Principal.WindowsIdentity identity = System.Security.Principal.WindowsIdentity.GetCurrent();
+                System.Security.Principal.WindowsPrincipal principal = new System.Security.Principal.WindowsPrincipal(identity);
+                //判断当前登录用户是否为管理员
+                if (principal.IsInRole(System.Security.Principal.WindowsBuiltInRole.Administrator))
+                {
+                    //如果是管理员，则直接运行
+                    log4net.GlobalContext.Properties["fname"] = ConfigAppSettings.GetValue(Setting_Init.Store_CID);
+                    log4net.Config.XmlConfigurator.Configure();
+                    System.Net.ServicePointManager.DefaultConnectionLimit = 512;
+                    // XmlConfigurator.Configure(); 
+                    Application.EnableVisualStyles();
+                    Application.SetCompatibleTextRenderingDefault(false);
+                    Application.Run(new FrmStore());
+                }
+                else
+                {
+                    //创建启动对象
+                    System.Diagnostics.ProcessStartInfo startInfo = new System.Diagnostics.ProcessStartInfo();
+                    startInfo.UseShellExecute = true;
+                    startInfo.WorkingDirectory = Environment.CurrentDirectory;
+                    startInfo.FileName = Application.ExecutablePath;
+                    //设置启动动作,确保以管理员身份运行
+                    startInfo.Verb = "runas";
+                    try
+                    {
+                        System.Diagnostics.Process.Start(startInfo);
+                    }
+                    catch
+                    {
+                        return;
+                    }
+                    //退出
+                    Application.Exit();
+                }
+            }
+
+        }
+        static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
+        {
+            LogUnhandledException(e.ExceptionObject);
+        }
+
+        static void Application_ThreadException(object sender, System.Threading.ThreadExceptionEventArgs e)
+        {
+            LogUnhandledException(e.Exception);
+        }
+
+        static void LogUnhandledException(object exceptionobj)
+        {
+            //这里可以进一步地写日志
+            LOGGER.Error(exceptionobj.ToString());
+        }
+    }
+}

source/ACSingleStore/Properties/AssemblyInfo.cs

+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// 有关程序集的常规信息通过以下
+// 特性集控制。更改这些特性值可修改
+// 与程序集关联的信息。
+[assembly: AssemblyTitle("ACSingleStore")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("ACSingleStore")]
+[assembly: AssemblyCopyright("Copyright ©  2017")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// 将 ComVisible 设置为 false 使此程序集中的类型
+// 对 COM 组件不可见。如果需要从 COM 访问此程序集中的类型，
+// 则将该类型上的 ComVisible 特性设置为 true。
+[assembly: ComVisible(false)]
+
+// 如果此项目向 COM 公开，则下列 GUID 用于类型库的 ID
+[assembly: Guid("1b0a0559-e045-4edb-9dac-740eb0d8bb52")]
+
+// 程序集的版本信息由下面四个值组成:
+//
+//      主版本
+//      次版本 
+//      生成号
+//      修订号
+//
+// 可以指定所有这些值，也可以使用“生成号”和“修订号”的默认值，
+// 方法是按如下所示使用“*”:
+ [assembly: AssemblyVersion("1.0.*")]
+//[assembly: AssemblyVersion("1.0.0.0")]
+//[assembly: AssemblyFileVersion("1.0.0.0")]

source/ACSingleStore/Properties/Resources.Designer.cs

+//------------------------------------------------------------------------------
+// <auto-generated>
+//     此代码由工具生成。
+//     运行时版本:4.0.30319.42000
+//
+//     对此文件的更改可能会导致不正确的行为，并且如果
+//     重新生成代码，这些更改将会丢失。
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace OnlineStore.ACSingleStore.Properties {
+    using System;
+    
+    
+    /// <summary>
+    ///   一个强类型的资源类，用于查找本地化的字符串等。
+    /// </summary>
+    // 此类是由 StronglyTypedResourceBuilder
+    // 类通过类似于 ResGen 或 Visual Studio 的工具自动生成的。
+    // 若要添加或移除成员，请编辑 .ResX 文件，然后重新运行 ResGen
+    // (以 /str 作为命令选项)，或重新生成 VS 项目。
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "15.0.0.0")]
+    [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    internal class Resources {
+        
+        private static global::System.Resources.ResourceManager resourceMan;
+        
+        private static global::System.Globalization.CultureInfo resourceCulture;
+        
+        [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
+        internal Resources() {
+        }
+        
+        /// <summary>
+        ///   返回此类使用的缓存的 ResourceManager 实例。
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Resources.ResourceManager ResourceManager {
+            get {
+                if (object.ReferenceEquals(resourceMan, null)) {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("OnlineStore.ACSingleStore.Properties.Resources", typeof(Resources).Assembly);
+                    resourceMan = temp;
+                }
+                return resourceMan;
+            }
+        }
+        
+        /// <summary>
+        ///   重写当前线程的 CurrentUICulture 属性
+        ///   重写当前线程的 CurrentUICulture 属性。
+        /// </summary>
+        [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
+        internal static global::System.Globalization.CultureInfo Culture {
+            get {
+                return resourceCulture;
+            }
+            set {
+                resourceCulture = value;
+            }
+        }
+    }
+}

source/ACSingleStore/Properties/Resources.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+</root>
\ No newline at end of file

source/ACSingleStore/Properties/Settings.Designer.cs

+//------------------------------------------------------------------------------
+// <auto-generated>
+//     此代码由工具生成。
+//     运行时版本:4.0.30319.42000
+//
+//     对此文件的更改可能会导致不正确的行为，并且如果
+//     重新生成代码，这些更改将会丢失。
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+namespace OnlineStore.ACSingleStore.Properties {
+    
+    
+    [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "15.9.0.0")]
+    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
+        
+        private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
+        
+        public static Settings Default {
+            get {
+                return defaultInstance;
+            }
+        }
+    }
+}

source/ACSingleStore/Properties/Settings.settings

+<?xml version='1.0' encoding='utf-8'?>
+<SettingsFile xmlns="http://schemas.microsoft.com/VisualStudio/2004/01/settings" CurrentProfile="(Default)">
+  <Profiles>
+    <Profile Name="(Default)" />
+  </Profiles>
+  <Settings />
+</SettingsFile>

source/ACSingleStore/positionTool/FrmPositionTool.resx

+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+    Microsoft ResX Schema 
+    
+    Version 2.0
+    
+    The primary goals of this format is to allow a simple XML format 
+    that is mostly human readable. The generation and parsing of the 
+    various data types are done through the TypeConverter classes 
+    associated with the data types.
+    
+    Example:
+    
+    ... ado.net/XML headers & schema ...
+    <resheader name="resmimetype">text/microsoft-resx</resheader>
+    <resheader name="version">2.0</resheader>
+    <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+    <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+    <data name="Name1"><value>this is my long string</value><comment>this is a comment</comment></data>
+    <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+    <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+        <value>[base64 mime encoded serialized .NET Framework object]</value>
+    </data>
+    <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+        <value>[base64 mime encoded string representing a byte array form of the .NET Framework object]</value>
+        <comment>This is a comment</comment>
+    </data>
+                
+    There are any number of "resheader" rows that contain simple 
+    name/value pairs.
+    
+    Each data row contains a name, and value. The row also contains a 
+    type or mimetype. Type corresponds to a .NET class that support 
+    text/value conversion through the TypeConverter architecture. 
+    Classes that don't support this are serialized and stored with the 
+    mimetype set.
+    
+    The mimetype is used for serialized objects, and tells the 
+    ResXResourceReader how to depersist the object. This is currently not 
+    extensible. For a given mimetype the value must be set accordingly:
+    
+    Note - application/x-microsoft.net.object.binary.base64 is the format 
+    that the ResXResourceWriter will generate, however the reader can 
+    read any of the formats listed below.
+    
+    mimetype: application/x-microsoft.net.object.binary.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Binary.BinaryFormatter
+            : and then encoded with base64 encoding.
+    
+    mimetype: application/x-microsoft.net.object.soap.base64
+    value   : The object must be serialized with 
+            : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+            : and then encoded with base64 encoding.
+
+    mimetype: application/x-microsoft.net.object.bytearray.base64
+    value   : The object must be serialized into a byte array 
+            : using a System.ComponentModel.TypeConverter
+            : and then encoded with base64 encoding.
+    -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:import namespace="http://www.w3.org/XML/1998/namespace" />
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="metadata">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" />
+              </xsd:sequence>
+              <xsd:attribute name="name" use="required" type="xsd:string" />
+              <xsd:attribute name="type" type="xsd:string" />
+              <xsd:attribute name="mimetype" type="xsd:string" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="assembly">
+            <xsd:complexType>
+              <xsd:attribute name="alias" type="xsd:string" />
+              <xsd:attribute name="name" type="xsd:string" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+              <xsd:attribute ref="xml:space" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>2.0</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <metadata name="timer1.TrayLocation" type="System.Drawing.Point, System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a">
+    <value>17, 17</value>
+  </metadata>
+</root>
\ No newline at end of file

source/ACSingleStore/记录.txt

+            //                机器状态 顶灯显示 
+            //                                              绿 黄  红
+            //机器复位中                             闪 灭   灭
+            //机器待机中                             亮 灭   灭
+            //机器出入库中                          闪 闪   灭
+            //温湿度超限报警中                   亮 闪   灭
+            //温湿度超限报警中超过30分钟  亮 闪   闪
+            //机器未启动                             灭 灭   灭
+            //机器设备故障(非温湿度)报警    亮   灭 闪
+
+  在RC1246-ACSingleStore 项目基础上，
+ 新建分支RC1250-ACSingleStore，作为佳世达流水线单台料仓软件
+
+  5 出库时根据StatusBean返回data中的参数决定料盘流转到哪里
+   
+   urgentReel: true 表示紧急料,需要出到料串上
+   cutReel: true 表示分盘料,需要出到料串上
+   smallReel: true  小料(7x8),放置到小料架上
+   rfid: 分配的料架RFID
+   rfidLoc: 料架的架位,值为-1时,可以自由分配皮带线, 小料时,架位为1-46优先走1/2号皮带线,47-92优先走3/4号皮带线, 70,71,72时只能分配到3/4号皮带线;大料时,架位1-6优先走1/2号皮带线, 7-12优先走3/4号皮带线
+
+   仓位命名: 4D01020304 
+第1和第2位表示楼层(4D) 
+第3和第4位表示料仓(01) 01-18为流水线料仓, 19-24为包装料仓 
+第5和第6位表示列(02) 
+第7和第8位表示行(03) 
+第9和第10位表示隔板位置(04) 
+例如: 4D12010124 表示4楼12号料仓第1列第1行架子上的第24个隔板位置 
+4D19050208 表示4楼19号料仓(包装料仓)第5列第2行架子上的第8个隔板位置
+
+
+
+20200408
+入库时仓门口必须有料。
+20200616
+盘点
+
+
+20200826
+入库时未检测到物料的报警自动清除。
+大盘位置校准时，需要放下，拿起，再放下拿起2次。
+入库放料后需要检测料叉无信号，否则等待信号超时。
+
+
+入库时，回到仓门后在检测叉子上是否有料盘。
+
+20200924
+大料盘定位时，第二次定位需要压紧轴放松，在压紧。
+
+
+20201009
+入库时暂不判断是否有料盘
+出库时不判断叉子上是否有料盘，待料盘放到仓门口时，如果没有料盘，发送提示信息到服务器，并调用取消任务接口

source/Common/Common.csproj

+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="12.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{43CDD09E-FCF3-4960-A01D-3BBFE9933122}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>OnlineStore.Common</RootNamespace>
+    <AssemblyName>Common</AssemblyName>
+    <TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <TargetFrameworkProfile />
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+    <Prefer32Bit>false</Prefer32Bit>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="log4net, Version=1.2.15.0, Culture=neutral, PublicKeyToken=669e0ddf0bb1aa2a, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\dll\log4net.dll</HintPath>
+    </Reference>
+    <Reference Include="Newtonsoft.Json">
+      <HintPath>..\..\dll\Newtonsoft.Json.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.Configuration" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Drawing" />
+    <Reference Include="System.Windows.Forms" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="bean\Bean.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+    <Compile Include="Setting_Init.cs" />
+    <Compile Include="util\AcSerialBean.cs" />
+    <Compile Include="util\ConfigAppSettings.cs" />
+    <Compile Include="util\FormUtil.cs" />
+    <Compile Include="util\HttpHelper.cs" />
+    <Compile Include="util\HumitureController.cs" />
+    <Compile Include="util\HumitureServer.cs" />
+    <Compile Include="util\JsonHelper.cs" />
+    <Compile Include="util\LogUtil.cs" />
+    <Compile Include="util\MyWebClient.cs">
+      <SubType>Component</SubType>
+    </Compile>
+    <Compile Include="util\ScanCodeManager.cs" />
+    <Compile Include="util\TcpClient.cs" />
+    <Compile Include="util\TcpServer.cs" />
+    <Compile Include="util\UdpServer.cs" />
+  </ItemGroup>
+  <ItemGroup>
+    <WCFMetadata Include="Service References\" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <!-- To modify your build process, add your task inside one of the targets below and uncomment it. 
+       Other similar extension points exist, see Microsoft.Common.targets.
+  <Target Name="BeforeBuild">
+  </Target>
+  <Target Name="AfterBuild">
+  </Target>
+  -->
+</Project>
\ No newline at end of file

source/Common/Properties/AssemblyInfo.cs

+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// 有关程序集的常规信息通过以下
+// 特性集控制。更改这些特性值可修改
+// 与程序集关联的信息。
+[assembly: AssemblyTitle("Common")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("Common")]
+[assembly: AssemblyCopyright("Copyright ©  2016")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// 将 ComVisible 设置为 false 使此程序集中的类型
+// 对 COM 组件不可见。如果需要从 COM 访问此程序集中的类型，
+// 则将该类型上的 ComVisible 特性设置为 true。
+[assembly: ComVisible(false)]
+
+// 如果此项目向 COM 公开，则下列 GUID 用于类型库的 ID
+[assembly: Guid("f8eab140-5f98-4df7-842c-0d866e759c9a")]
+
+// 程序集的版本信息由下面四个值组成:
+//
+//      主版本
+//      次版本 
+//      生成号
+//      修订号
+//
+// 可以指定所有这些值，也可以使用“生成号”和“修订号”的默认值，
+// 方法是按如下所示使用“*”:
+ [assembly: AssemblyVersion("1.0.*")]
+//[assembly: AssemblyVersion("1.0.0.0")]
+//[assembly: AssemblyFileVersion("1.0.0.0")]

source/Common/Setting_Init.cs

+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+ 
+
+namespace OnlineStore.Common
+{
+    /// <summary> 
+    /// 记录配置的key
+    /// </summary>
+    public class Setting_Init
+    {
+        public static string Server_Log_Open = "Server_Log_Open";
+        /// <summary>
+        /// 系统启动时自动启动料仓，=1时自动启动，并隐藏窗口，=0时不需要
+        /// </summary>
+        public static string App_AutoRun = "App_AutoRun";
+        /// <summary>
+        /// 系统主界面标题
+        /// </summary>
+        public static string App_Title = "App_Title"; 
+      
+       
+        public static string http_server = "http.server";
+        public static string Store_CID = "Store_CID";
+        public static string Store_ID = "Store_ID";
+
+        /// <summary>
+        /// 料仓数量
+        /// </summary>
+        public static string store_count = "store_count";
+        /// <summary>
+        /// 料仓类型，1=在线料仓
+        /// </summary>
+        public static string Store_Type = "Store_Type";
+    
+        public static string Store_ConfigPath = "Store_ConfigPath";
+        public static string Box_ConfigPath = "Box_ConfigPath";
+        public static string Store_Position_Config = "Store_Position_Config";
+        /// <summary>
+        /// 摄像机名称，多个中间使用#分割
+        /// </summary>
+        public static string CameraName = "CameraName";
+        /// <summary>
+        /// 需要识别的二维码类型，多个中间使用#分割
+        /// </summary>
+        public static string CodeType = "CodeType";
+
+        /// <summary>
+        /// 开始吹气的判断值（配置值=服务器发送的湿度值-开始吹气值）
+        /// </summary>
+        public static string StartBlowValue = "StartBlowValue";
+        /// <summary>
+        /// 停止吹气的判断值（配置值=服务器发送的湿度值-停止吹气值）
+        /// </summary>
+        public static string StopBlowValue = "StopBlowValue";
+
+        /// <summary>
+        /// 配置文件路径  Data Matrix ECC 200.dcm
+        /// </summary>
+        public static string CodeParamPath = "CodeParamPath";
+        /// <summary>
+        /// 高度传感器转换系数
+        /// </summary>
+        public static string AI_ConvertPosition = "AI_ConvertPosition";
+        /// <summary>
+        /// 进出轴最大待机点，需要小于3000
+        /// </summary>
+        public static string InOutDefaultPosition = "InOutDefaultPosition";
+
+        public static string Config_Pwd = "Config_Pwd";
+        /// <summary>
+        /// 出库等待料盘拿走的时间，秒
+        /// </summary>
+        public static string OutStoreWaitSeconds = "OutStoreWaitSeconds";
+ 
+
+        /// <summary>
+        /// 温控器类型，0=壁挂王字壳温湿度变送器，1=妙昕温湿度记录仪
+        /// </summary>
+        public static string HumitureControllerType = "HumitureControllerType";
+
+        public static string UseAIOBOX = "UseAIOBOX";
+
+        public static string LineServerIp = "LineServerIp";
+        public static string LineServerPort = "LineServerPort";
+        /// <summary>
+        /// 是否调试状态
+        /// </summary>
+        public static string IsInDebug = "IsInDebug";
+
+        public static string ACBaudRate = "ACBaudRate";
+
+         
+        public static string Tool_P3_Offset = "Tool_P3_Offset";
+        public static string Tool_P4_Offset = "Tool_P4_Offset";
+        public static string Tool_P5_Offset = "Tool_P5_Offset";
+        public static string Tool_P6_Offset = "Tool_P6_Offset";
+
+        public static string Tool_TargetSpeed= "Tool_TargetSpeed";
+        public static string Tool_TargetPosition= "Tool_TargetPosition";
+
+
+
+        public static string Location_PosID_ = "Location_PosID_";
+
+    }
+}

source/Common/bean/Bean.cs

+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+ 
+
+namespace OnlineStore.Common
+{
+    /// <summary>
+    /// 与服务器通信用对象
+    /// </summary>
+    public class Operation
+    {
+        /// <summary>
+        /// 料仓唯一标识
+        /// </summary>
+        private string _cid = "";
+        public string cid
+        {
+            get { return _cid; }
+            set { _cid = value; }
+        }
+
+        /// <summary>
+        /// 请求序列号
+        /// </summary>
+        public int seq { get; set; }
+        /// <summary>
+        /// 操作码（0无操作（发送料仓状态给服务器），
+        /// 1扫码入库(扫码成功后发送给服务器)，
+        /// 2 出库（服务器发送）,3表示错误信息 ）
+        /// 4，发送给服务表示二维码扫码入库，收到开始扫码
+        /// </summary>
+        public int op { get; set; }
+        /// <summary>
+        /// 操作相关数据，
+        /// op=1时，客户端发送 code 二维码给服务器，服务器返回时有：posId库位编号，plateW:料盘宽度,plateH：料盘高度
+        /// 如果需要更新温湿度的报警值，服务器会发送alarmTemperature,alarmHumidity给客户端，客户端缓存，如果没有发送，不处理 
+        /// op=3时，data发送BoxID和AlarmCode
+        /// =4时扫码入库
+        /// =5时服务器发送预警温度
+        /// </summary>
+        private Dictionary<string, string> _data = new Dictionary<string, string>();
+        public Dictionary<string, string> data
+        {
+            get { return _data; }
+            set { _data = value; }
+        }
+        /// <summary>
+        /// 整体料仓状态
+        /// 1=正常运行中
+        /// 2=急停中
+        /// 3=故障（气压检测不到等，用msg发送详细故障说明）
+        /// 4=警告（用msg发送提醒，如出库到达工位但是没有工人操作）
+        /// </summary>
+        public int status { get; set; }
+        /// <summary>
+        /// 提示消息
+        /// 出入库错误： BOX正在调试中，不能出入库
+        /// 出入库错误： 急停了不能出入库
+        /// 入库错误：料盘过大，放不到指定的位置中去
+        /// 故障：气压信号检测不到
+        /// 警告：出库盘到达工位但是没有工人操作
+        /// </summary>
+        public string msg { get; set; }
+        /// <summary>
+        /// 包含的多个 BOX 的状态信息
+        /// </summary>
+        public Dictionary<int, BoxStatus> boxStatus = new Dictionary<int, BoxStatus>();
+        /// <summary>
+        /// 报警集合
+        /// </summary>
+        public List<AlarmInfo> alarmList = new List<AlarmInfo>();
+    }
+
+    /// <summary>
+    /// 单台料仓状态（包含流水线）
+    /// </summary>
+    public class BoxStatus
+    {
+        /// <summary>
+        /// Box编号，从1开始
+        /// </summary>
+        public int boxId { get; set; }
+        /// <summary>
+        /// 单台BOX状态
+        /// 急停，故障，调试中，就绪状态（正常待机）
+        /// 入库执行中，入库完成，入库失败
+        /// 出库执行中，出库完成，出库失败
+        /// </summary>
+        public int status { get; set; }
+        /// <summary>
+        /// 单台BOX的消息
+        /// 正在调试中，不能出入库
+        /// 入库失败原因：
+        /// 出库失败原因：
+        /// </summary>
+        public string msg { get; set; }
+        /// <summary>
+        /// 温度
+        /// </summary>
+        public string temperature { get; set; }
+        /// <summary>
+        /// 湿度
+        /// </summary>
+        public string humidity { get; set; }
+
+        /// <summary>
+        /// 操作相关数据，
+        /// 出库完成后发送posId库位编号给服务器  
+        /// </summary>
+        private Dictionary<string, string> _data = new Dictionary<string, string>();
+        public Dictionary<string, string> data
+        {
+            get { return _data; }
+            set { _data = value; }
+        }
+    }
+    public class AlarmInfo
+    {
+
+        public AlarmInfo(int StoreID, int aType, string alarmDetial, string WarnMsg, int inoutStatus)
+        {
+            // TODO: Complete member initialization
+            this.boxId = StoreID;
+            this.alarmType = aType;
+            this.alarmDetail = alarmDetial;
+            this.alarmMsg = WarnMsg;
+            this.inOutStatus = inoutStatus;
+        }
+
+        public AlarmInfo()
+        {
+            // TODO: Complete member initialization
+        }
+        /// <summary>
+        /// 料仓ID,0表示流水线
+        /// </summary>
+        public int boxId { get; set; }        
+        /// <summary>
+        /// 报警类型，
+        /// </summary>
+        public int alarmType { get; set; }
+        /// <summary>
+        /// 报警详情
+        ///AlarmType= 0	消息	"1=原点返回
+        //AlarmType= 0	消息   2=复位"
+        //AlarmType=1	总体错误	"1=急停
+        //AlarmType=1	总体错误    2=没有气压信号
+        //AlarmType=1	总体错误，3=盘错乱"
+        //AlarmType=2		运动轴错误	1=第一轴（旋转）
+        //AlarmType=2		运动轴错误	2=第二轴（上下轴）
+        //AlarmType=2		运动轴错误	3=第三轴（前进轴）
+        //AlarmType=2		运动轴错误	4=第四轴（压紧轴）"
+        //AlarmType=2 	电钢报警	    5=上下电钢
+        //AlarmType=3		 IO报警，信号超时	io电器定义（电器定义）
+        /// </summary>
+        public string  alarmDetail { get; set; }
+        /// <summary>
+        /// 报警消息
+        /// </summary>
+        public string  alarmMsg { get; set; }
+        /// <summary>
+        /// 0,1=入库，2=出库
+        /// </summary>
+        public int inOutStatus { get; set; }
+    }
+
+    public class ParamDefine
+    {
+        /// <summary>
+        /// 库位 ID
+        /// </summary>
+        public static string posId = "posId";
+        /// <summary>
+        /// 料盘宽
+        /// </summary>
+        public static string plateW = "plateW";
+        /// <summary>
+        /// 料盘高
+        /// </summary>
+        public static string plateH = "plateH";
+        /// <summary>
+        /// 料仓ID
+        /// </summary>
+        public static string storeId = "storeId";
+        /// <summary>
+        /// 报警码
+        /// </summary>
+        public static string alarmCode = "alarmCode";
+        /// <summary>
+        /// 报警详情或参数
+        /// </summary>
+        public static string alarmDetial = "alarmDetial";
+        /// <summary>
+        /// 湿度报警值
+        /// </summary>
+        public static string maxHumidity = "humi"; 
+        /// <summary>
+        /// 温度报警值
+        /// </summary>
+        public static string maxTemperature = "temp";
+ 
+        /// <summary>
+        /// urgentReel: true 表示紧急料,需要出到料串上
+        /// </summary>
+        public static string urgentReel = "urgentReel";
+        /// <summary>
+        /// cutReel: true 表示分盘料,需要出到料串上
+        /// </summary>
+        public static string cutReel = "cutReel";
+        /// <summary>
+        /// smallReel: true  小料(7x8),放置到小料架上
+        /// </summary>
+        public static string smallReel = "smallReel";
+        /// <summary>
+        /// rfid: 分配的料架RFID
+        /// </summary>
+        public static string rfid = "rfid";
+        /// <summary>
+        /// rfidLoc: 料架的架位,值为 - 1时,可以自由分配皮带线, 小料时,架位为1 - 46优先走1 / 2号皮带线,47 - 92优先走3 / 4号皮带线, 
+        /// 70,71,72时只能分配到3 / 4号皮带线; 大料时,架位1 - 6优先走1 / 2号皮带线, 7 - 12优先走3 / 4号皮带线
+        /// </summary>
+        public static string rfidLoc = "rfidLoc";
+
+        public static string barcode = "barcode";
+    }
+
+}

source/Common/util/ConfigAppSettings.cs

+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+using System.Configuration;
+using System.Threading;
+using System.Xml;
+using System.Windows.Forms;
+using log4net;
+
+namespace OnlineStore.Common
+{
+    public class ConfigAppSettings
+    { 
+
+        private static int seq = 1;
+
+        public static int nextSeq()
+        {
+            if (seq.Equals(Int32.MaxValue))
+            {
+                LogUtil.info("seq当前值：" + seq + ",重置seq=0");
+                seq = 0;
+            }
+            Interlocked.Increment(ref seq);
+            return seq;
+        }
+        public static string GetValue(string keyStr, string storeStr)
+        {
+            string key = keyStr + storeStr;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                return GetValue(keyStr);
+            }
+            else
+            {
+                return config.AppSettings.Settings[key].Value;
+            }
+        }
+
+        public static decimal GetNumValue(string keyStr, string storeStr)
+        {
+            string key = keyStr + storeStr;
+            decimal a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                return GetNumValue(keyStr);
+            }
+            else
+            {
+                {
+                    Decimal.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            }
+            return a;
+        }
+        public static int GetIntValue(string keyStr, string storeStr)
+        {
+            string key = keyStr + storeStr;
+            int a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                return GetIntValue(keyStr);
+            }
+            else
+            {
+                {
+                    Int32.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            } return a;
+        }
+        public static string GetValue(string key)
+        {
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                LogUtil.error("未找到配置：" + key + ",请检查配置是否完整！");
+                return "";
+            }
+            else
+            {
+                return config.AppSettings.Settings[key].Value;
+            }
+        }
+
+        public static decimal GetNumValue(string key)
+        {
+            decimal a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                LogUtil.error("未找到配置：" + key + ",请检查配置是否完整！");
+                return a;
+            }
+            else
+            {
+                {
+                    Decimal.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            }
+            return a;
+        }
+        public static int GetIntValue(string key)
+        {
+            int a = 0;
+            System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+            if (config.AppSettings.Settings[key] == null)
+            {
+                LogUtil.error("未找到配置：" + key + ",请检查配置是否完整！");
+                return a; 
+            }
+            else
+            {
+                {
+                    Int32.TryParse(config.AppSettings.Settings[key].Value, out a);
+                }
+            } return a;
+        }
+        public static void SaveValue(string key, int value)
+        {
+            SaveValue(key, value.ToString());
+        }
+        public static void SaveValue(string key, string value)
+        {
+            try
+            {
+                if (key.Equals("") || value.Equals(""))
+                {
+                    //return;
+                }
+                //增加的内容写在appSettings段下 <add key="RegCode" value="0"/> 
+                System.Configuration.Configuration config = ConfigurationManager.OpenExeConfiguration(ConfigurationUserLevel.None);
+                if (config.AppSettings.Settings[key] == null)
+                {
+                    SetValue(key, value);
+                }
+                else
+                {
+                    UpdateConfig(key, value);
+                }
+            }
+            catch (Exception ex)
+            {
+                LogUtil.error(  "SaveValue保存配置出错：AppKey=" + key + "，AppValue=" + value + "," + ex.StackTrace);
+            }
+        }
+
+        /// <summary>
+        /// 更新配置文件信息
+        /// </summary>
+        /// <param name="name">配置文件字段名称</param>
+        /// <param name="Xvalue">值</param>
+        private static void UpdateConfig(string name, string Xvalue)
+        {
+            try
+            {
+                XmlDocument doc = new XmlDocument();
+                doc.Load(Application.ExecutablePath + ".config");
+                XmlNode node = doc.SelectSingleNode(@"//add[@key='" + name + "']");
+                XmlElement ele = (XmlElement)node;
+                ele.SetAttribute("value", Xvalue);
+                doc.Save(Application.ExecutablePath + ".config");
+            }
+            catch (Exception ex)
+            {
+                LogUtil.error(  "UpdateConfig保存配置出错：name=" + name + "，Xvalue=" + Xvalue + "," + ex.StackTrace);
+            }
+        }
+        ///<summary>  
+        ///向.config文件的appKey结写入信息AppValue   保存设置  
+        ///</summary>  
+        ///<param name="AppKey">节点名</param>  
+        ///<param name="AppValue">值</param>
+        private static void SetValue(String AppKey, String AppValue)
+        {
+            try
+            {
+                XmlDocument xDoc = new XmlDocument();
+                xDoc.Load(System.Windows.Forms.Application.ExecutablePath + ".config");
+                XmlNode xNode;
+                XmlElement xElem1;
+                XmlElement xElem2;
+                xNode = xDoc.SelectSingleNode("//appSettings");
+                xElem1 = (XmlElement)xNode.SelectSingleNode("//add[@key='" + AppKey + "']");
+                if (xElem1 != null)
+                    xElem1.SetAttribute("value", AppValue);
+                else
+                {
+                    xElem2 = xDoc.CreateElement("add");
+                    xElem2.SetAttribute("key", AppKey);
+                    xElem2.SetAttribute("value", AppValue);
+                    xNode.AppendChild(xElem2);
+                }
+                xDoc.Save(System.Windows.Forms.Application.ExecutablePath + ".config");
+            }
+            catch (Exception ex)
+            {
+                LogUtil.error(  "SetValue保存配置出错：AppKey=" + AppKey + "，AppValue=" + AppValue + "," + ex.StackTrace);
+            }
+        }
+    }
+}

source/Common/util/FormUtil.cs

+using System;
+using System.Collections.Generic;
+using System.Linq;
+using System.Text;
+ 
+using System.Windows.Forms;
+
+namespace OnlineStore.Common
+{
+    public class FormUtil
+    {
+        public static int GetIntValue(TextBox txt)
+        {
+            int value = 0;
+            try
+            {
+                value = int.Parse(txt.Text);
+            }
+            catch (Exception ex)
+            {              
+                value = 0;
+            }
+            return value;
+        }
+        public static short GetShortValue(TextBox txt)
+        {
+            short value = 0;
+            try
+            {
+                value = short.Parse(txt.Text);
+            }
+            catch (Exception ex)
+            {
+                value = 0;
+            }
+            return value;
+        }
+
+        public static double getDoubleValue(TextBox txt)
+        {
+            double value = 0;
+            try
+            {
+                value = double.Parse(txt.Text);
+            }
+            catch (Exception ex)
+            {
+                value = 0;
+            }
+            return value;
+        }
+
+        public static short get16ShortValue(TextBox txt)
+        {
+            short value = 0;
+            try
+            {
+                value = System.Convert.ToInt16(txt.Text,16);
+            }
+            catch
+            {
+                value = 0;
+            }
+            return value;
+        }
+
+        public static string GetShowStr(double value)
+        {
+            string wStr = "";
+            if (value == (int)value)
+            {
+                wStr = string.Format("{0:d}", (int)value);
+            }
+            else
+            {
+                wStr = string.Format("{0:f}", value);
+            }
+            return wStr;
+        }
+        public static string GetSpanStr(TimeSpan span)
+        {
+            //return Convert.ToDateTime(span.ToString()).ToString("HH:mm:ss");
+            string seconds = Math.Round(span.TotalSeconds % 60, 1).ToString();
+            if (seconds.IndexOf(".") >= 0)
+            {
+                seconds = seconds.ToString().PadLeft(4, '0');
+            }
+            else
+            {
+                seconds = seconds.ToString().PadLeft(2, '0');
+            }
+            return span.Hours.ToString().PadLeft(2, '0') + ":" + span.Minutes.ToString().PadLeft(2, '0') + ":" + seconds;
+        }
+        public static bool GetBoolData(Dictionary<string, string> data, string key, bool defaultValue=false)
+        {
+            if (data.ContainsKey(key))
+            {
+                try
+                {
+                    return Convert.ToBoolean(data[key]);
+                }
+                catch (Exception ex)
+                {
+
+                }
+            }
+            return defaultValue;
+        }
+        public static int GetIntData(Dictionary<string, string> data, string key, int defaultValue = 0)
+        {
+            if (data.ContainsKey(key))
+            {
+                try
+                {
+                    return Convert.ToInt32(data[key]);
+                }
+                catch (Exception ex)
+                {
+
+                }
+            }
+            return defaultValue;
+        }
+    }
+}