库位默认配置修改

source/HCSingleStore/App.config

@@ -11,7 +11,7 @@
     <!--   停止吹气的判断值（配置值=服务器发送的湿度值-停止吹气值）-->
     <add key="StopBlowValue" value="4" />
     <!--Server address-->
-    <!--<add key="http.server" value="http://192.168.101.11/myproject/" />-->
+    <!--  <add key="http.server" value="http://192.168.101.11/myproject/" />-->
     <!--storeType-->
     <add key="store_count" value="2" />
     <!--start one store config-->
@@ -30,15 +30,21 @@
     <!--出库等待料盘拿走的时间，秒-->
     <add key="OutStoreWaitSeconds" value="10" />
     <!--温控器类型，0=壁挂王字壳温湿度变送器，1=妙昕温湿度记录仪-->
-    <add key="HumitureControllerType" value="0" /> 
-    <add key ="UseHCBoard" value ="1"/>
+    <add key="HumitureControllerType" value="0" />
+    <add key="UseHCBoard" value="1" />
     <!--流水线地址和端口配置-->
-    <!--<add key="LineServerIp" value="192.168.8.108" />-->
+    <!-- <add key="LineServerIp" value="192.168.8.108" /> -->
     <add key="LineServerPort" value="5246" />
     <!--是否调试状态-->
     <add key="IsInDebug" value="1" />
     <add key="ClientSettingsProvider.ServiceUri" value="" />
-    <add key ="App_AutoRun" value ="0"/>
+    <add key="App_AutoRun" value="0" />
+    <add key="Tool_P3_Offset" value="60" />
+    <add key="Tool_P4_Offset" value="-60" />
+    <add key="Tool_P5_Offset" value="-60" />
+    <add key="Tool_P6_Offset" value="60" />
+    <add key="Tool_TargetSpeed" value="20" />
+    <add key="Tool_TargetPosition" value="60" />
   </appSettings>
   <log4net>
     <appender name="RollingLogFileAppender" type="log4net.Appender.RollingFileAppender">

source/HCSingleStore/positionTool/FrmPositionTool.cs

@@ -71,12 +71,12 @@ namespace OnlineStore.ACSingleStore
             int tSpeed = ConfigAppSettings.GetIntValue(Setting_Init.Tool_TargetSpeed);
             int tPosition = ConfigAppSettings.GetIntValue(Setting_Init.Tool_TargetPosition);
 
-            if (P3Offset.Equals(0)) P3Offset = 6000;
-            if (P4Offset.Equals(0)) P4Offset = -6000;
-            if (P5Offset.Equals(0)) P5Offset = -6000;
-            if (P6Offset.Equals(0)) P6Offset = 6000;
+            if (P3Offset.Equals(0)) P3Offset = 60;
+            if (P4Offset.Equals(0)) P4Offset = -60;
+            if (P5Offset.Equals(0)) P5Offset = -60;
+            if (P6Offset.Equals(0)) P6Offset = 60;
             if (tSpeed.Equals(0)) tSpeed = 20;
-            if (tPosition.Equals(0)) tPosition = 6000;
+            if (tPosition.Equals(0)) tPosition = 60;
 
             txtP3Offset.Text = P3Offset.ToString();
             txtP4Offset.Text = P4Offset.ToString();