Skip to content

李娜 / SO664-AssemblyLine

转到一个项目
切换导航栏
切换导航栏固定状态
Commit 3d1aa7e9 由 LN
选项

增加hy22

1 个父辈 8ff99d2c
内嵌 并排
正在显示 5 个修改的文件 包含 219 行增加 和 23 行删除
source/AssemblyLineClient/记录.txt
 20230908
修改：增加HY22
Config_Line.csv 增加配置：
DI,211,HY22横移托盘检测,HY22_TrayCheck,559,HC,X559
20230825 20230825
HY03顶升和前阻挡下降慢问题。 HY03顶升和前阻挡下降慢问题。
......
source/DeviceLibrary/LineConfig/Config_Line.csv
...@@ -566,7 +566,7 @@ DI,103,T3上料横移气缸放料端,SL_MoveCylinder_Give,266,HC,X266 ...@@ -566,7 +566,7 @@ DI,103,T3上料横移气缸放料端,SL_MoveCylinder_Give,266,HC,X266
DI,103,T3上料气缸放松端,SL_ClampCylinder_Relax,267,HC,X267 DI,103,T3上料气缸放松端,SL_ClampCylinder_Relax,267,HC,X267
DI,103,T3上料气缸料盘检测,SL_ClampCylinder_Check,268,HC,X268 DI,103,T3上料气缸料盘检测,SL_ClampCylinder_Check,268,HC,X268
DI,103,T3出口检测,SL_OutLine_Check,269,HC,X269 DI,103,T3出口检测,SL_OutLine_Check,269,HC,X269
,,,,270,HC,X270 DI,211,HY22前阻挡托盘检测,HY22_FTrayCheck,270,HC,X270
,,,,271,HC,X271 ,,,,271,HC,X271
,,,,,, ,,,,,,
DO,103,T3运行指示灯,SL_HddLed,208,HC,Y208 DO,103,T3运行指示灯,SL_HddLed,208,HC,Y208
...@@ -591,7 +591,7 @@ DO,103,T3上料气缸放松,SL_ClampCylinder_Relax,226,HC,Y226 ...@@ -591,7 +591,7 @@ DO,103,T3上料气缸放松,SL_ClampCylinder_Relax,226,HC,Y226
DO,103,T3上料气缸夹紧,SL_ClampCylinder_Work,227,HC,Y227 DO,103,T3上料气缸夹紧,SL_ClampCylinder_Work,227,HC,Y227
DO,103,T3托盘定位气缸前进,SL_TrayLocation_Before,228,HC,Y228 DO,103,T3托盘定位气缸前进,SL_TrayLocation_Before,228,HC,Y228
DO,103,T3托盘定位气缸后退,SL_TrayLocation_After,229,HC,Y229 DO,103,T3托盘定位气缸后退,SL_TrayLocation_After,229,HC,Y229
,,,,230,HC,Y230 DO,211,HY22前阻挡,HY22_FStopDown,230,HC,Y230
,,,,231,HC,Y231 ,,,,231,HC,Y231
,,,,232,HC,Y232 ,,,,232,HC,Y232
,,,,233,HC,Y233 ,,,,233,HC,Y233
...@@ -1131,7 +1131,7 @@ DI,0,T3-C1前阻挡托盘检测,HY_FrontStopCheck,555,HC,X555 ...@@ -1131,7 +1131,7 @@ DI,0,T3-C1前阻挡托盘检测,HY_FrontStopCheck,555,HC,X555
DI,0,T3-C1阻挡托盘检测,HY_TrayCheck,556,HC,X556 DI,0,T3-C1阻挡托盘检测,HY_TrayCheck,556,HC,X556
DI,0,T3-C1顶升上升端,HY_TopCylinder_Up,557,HC,X557 DI,0,T3-C1顶升上升端,HY_TopCylinder_Up,557,HC,X557
DI,0,T3-C1顶升下降端,HY_TopCylinder_Down,558,HC,X558 DI,0,T3-C1顶升下降端,HY_TopCylinder_Down,558,HC,X558
,,,,559,HC,X559 DI,211,HY22横移托盘检测,HY22_TrayCheck,559,HC,X559
,,,,,, ,,,,,,
DO,18,D9-1阻挡1下降,StopDown1,448,HC,Y448 DO,18,D9-1阻挡1下降,StopDown1,448,HC,Y448
DO,18,D9-1阻挡2下降,StopDown2,449,HC,Y449 DO,18,D9-1阻挡2下降,StopDown2,449,HC,Y449
......
source/DeviceLibrary/assemblyLine/HY/HY_C1Line.cs
...@@ -44,7 +44,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -44,7 +44,7 @@ namespace OnlineStore.DeviceLibrary
StopMove(); StopMove();
runStatus = LineRunStatus.Reset; runStatus = LineRunStatus.Reset;
MoveInfo.NewMove(LineMoveType.Reset); MoveInfo.NewMove(LineMoveType.Reset);
StartReset(); StartReset();
return true; return true;
} }
...@@ -66,6 +66,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -66,6 +66,10 @@ namespace OnlineStore.DeviceLibrary
IOMove(IO_Type.HY_FrontStopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_FrontStopDown, IO_VALUE.LOW);
IOMove(IO_Type.HY_StopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_StopDown, IO_VALUE.LOW);
} }
if (IsHY11())
{
IOMove(IO_Type.HY22_FStopDown, IO_VALUE.LOW);
}
LineStop(); LineStop();
CylinderMove(null, IO_Type.HY_TopCylinder_Up, IO_Type.HY_TopCylinder_Down); CylinderMove(null, IO_Type.HY_TopCylinder_Up, IO_Type.HY_TopCylinder_Down);
...@@ -119,7 +123,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -119,7 +123,7 @@ namespace OnlineStore.DeviceLibrary
{ {
IOMove(IO_Type.HY_FrontStopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_FrontStopDown, IO_VALUE.LOW);
IOMove(IO_Type.HY_StopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_StopDown, IO_VALUE.LOW);
} }
//CylinderMove(null, IO_Type.HY_TopCylinder_Up, IO_Type.HY_TopCylinder_Down); //CylinderMove(null, IO_Type.HY_TopCylinder_Up, IO_Type.HY_TopCylinder_Down);
//HY_StopCylinderDown(null); //HY_StopCylinderDown(null);
//LocationCylinderDown(null); //LocationCylinderDown(null);
...@@ -174,7 +178,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -174,7 +178,8 @@ namespace OnlineStore.DeviceLibrary
{ {
FixtureProcess(); FixtureProcess();
} }
} }
HY22Process();
} }
} }
...@@ -183,6 +188,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -183,6 +188,7 @@ namespace OnlineStore.DeviceLibrary
private Stopwatch frontTrayCheckWait = new Stopwatch(); private Stopwatch frontTrayCheckWait = new Stopwatch();
private Stopwatch trayCheckLowWait = new Stopwatch();//上一个托盘离开的时间 private Stopwatch trayCheckLowWait = new Stopwatch();//上一个托盘离开的时间
private Stopwatch olcheckWatch = new Stopwatch(); private Stopwatch olcheckWatch = new Stopwatch();
private Stopwatch hy22CheckWait = new Stopwatch();
private object lockObj = ""; private object lockObj = "";
private bool preTrayIsC1Line = false; private bool preTrayIsC1Line = false;
...@@ -244,6 +250,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -244,6 +250,7 @@ namespace OnlineStore.DeviceLibrary
bool check2IsOk = CheckStopWatch(trayCheckLowWait, TrayWaitTime, false)||String.IsNullOrEmpty(RFIDIP); bool check2IsOk = CheckStopWatch(trayCheckLowWait, TrayWaitTime, false)||String.IsNullOrEmpty(RFIDIP);
bool isHY11 = DeviceID.Equals(211);//HY11优先处理C5出来的托盘 bool isHY11 = DeviceID.Equals(211);//HY11优先处理C5出来的托盘
isHY11 = false;
if ((preTrayIsC1Line||isHY11) && Config.IsOutLineOut && IOValue(IO_Type.HY_OL_Tray_Check).Equals(IO_VALUE.HIGH)) if ((preTrayIsC1Line||isHY11) && Config.IsOutLineOut && IOValue(IO_Type.HY_OL_Tray_Check).Equals(IO_VALUE.HIGH))
{ {
StopDownCount = 0; StopDownCount = 0;
...@@ -278,6 +285,115 @@ namespace OnlineStore.DeviceLibrary ...@@ -278,6 +285,115 @@ namespace OnlineStore.DeviceLibrary
//{ //{
// LogUtil.error(Name + " CheckFixture " + "失败，未得到锁"); // LogUtil.error(Name + " CheckFixture " + "失败，未得到锁");
//} //}
}
private bool IsHY11()
{
if ( DeviceID.Equals(211))
{
return true ;
}
return false;
}
private void HY22Process()
{
if (!IsHY11())
{
return;
}
try
{
if (SecondMoveInfo.MoveType.Equals(LineMoveType.None))
{
if (MoveInfo.MoveStep >= LineMoveStep.HY71_OL_Wait && MoveInfo.MoveStep <= LineMoveStep.HY79_OL_HYEnd)
{
hy22CheckWait.Stop();
return;
}
if (!HY22StopDownCanMove())
{
hy22CheckWait.Stop();
return;
}
if (IOValue(IO_Type.HY22_FTrayCheck).Equals(IO_VALUE.HIGH) && IOValue(IO_Type.HY22_TrayCheck).Equals(IO_VALUE.LOW))
{
//如果已经持续500ms，可以下降阻挡
if (CheckStopWatch(hy22CheckWait, TrayWaitTime, true))
{
SecondMoveInfo.NewMove(LineMoveType.Fixture);
SecondMoveInfo.NextMoveStep(LineMoveStep.HY02_FrontStopDown);
LogUtil.info(Name + " HY22_FTrayCheck 检测到托盘，开始下降阻挡 HY22_FStopDown，等待检测到 HY22_TrayCheck=HIGH");
IOMove(IO_Type.HY22_FStopDown, IO_VALUE.HIGH, TrayManager.StopDTime);
SecondMoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY22_TrayCheck, IO_VALUE.HIGH));
}
}
else
{
hy22CheckWait.Stop();
}
}
else
{
SMoveProcess();
}
}
catch (Exception ex)
{
LogUtil.error(Name + " HY22Process " + " 出错：" + ex.ToString());
}
}
private void SMoveProcess()
{
if (SecondMoveInfo.IsInWait)
{
CheckWait(SecondMoveInfo);
}
if (SecondMoveInfo.IsInWait)
{
return;
}
switch (SecondMoveInfo.MoveStep)
{
case LineMoveStep.HY02_FrontStopDown:
SecondMoveInfo.NextMoveStep(LineMoveStep.HY05_TrayCheck);
LogUtil.info(Name + " 已检测到 HY22_TrayCheck=HIGH ，等待 HY22_TrayCheck =LOW");
SecondMoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY22_TrayCheck, IO_VALUE.LOW));
SecondMoveInfo.WaitList.Add(WaitResultInfo.WaitTime(10000));
SecondMoveInfo.OneWaitCanEndStep = true;
break;
case LineMoveStep.HY05_TrayCheck:
SecondMoveInfo.EndMove();
break;
}
}
private bool HY22StopDownCanMove()
{
if (!IsHY11())
{
return false ;
}
if (IOValue(IO_Type.HY22_FStopDown).Equals(IO_VALUE.HIGH))
{
hy22CheckWait.Stop();
return false;
}
if (!SecondMoveInfo.MoveType.Equals(LineMoveType.None))
{
return false;
}
return true;
} }
private void TrayStart_HY02_FrontStopDown() private void TrayStart_HY02_FrontStopDown()
{ {
...@@ -417,6 +533,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -417,6 +533,10 @@ namespace OnlineStore.DeviceLibrary
ClearTrayRFID(); ClearTrayRFID();
IOMove(IO_Type.HY_OL_StopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_OL_StopDown, IO_VALUE.LOW);
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_OL_Tray_Check, IO_VALUE.HIGH)); MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_OL_Tray_Check, IO_VALUE.HIGH));
if (IsHY11())
{
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY22_FStopDown, IO_VALUE.LOW));
}
} }
} }
catch (Exception ex) catch (Exception ex)
...@@ -459,7 +579,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -459,7 +579,7 @@ namespace OnlineStore.DeviceLibrary
{ {
if (StopDownCount == 0) if (StopDownCount == 0)
{ {
LogInfo(SecondMoveInfo.SLog + msg + "，暂不结束，重新下降一次前阻挡"); LogInfo(MoveInfo.SLog + msg + "，暂不结束，重新下降一次前阻挡");
//阻挡重新下降一次 //阻挡重新下降一次
StopDownCount++; StopDownCount++;
...@@ -500,14 +620,14 @@ namespace OnlineStore.DeviceLibrary ...@@ -500,14 +620,14 @@ namespace OnlineStore.DeviceLibrary
#region 托盘检测处理 #region 托盘检测处理
if (MoveInfo.IsStep(LineMoveStep.HY02_FrontStopDown)) if (MoveInfo.IsStep(LineMoveStep.HY02_FrontStopDown))
{ {
//如果此步骤持续还不到一秒，是信号闪烁，暂不处理 //如果此步骤持续还不到一秒，是信号闪烁，暂不处理
//if (MoveInfo.StepSpan().TotalSeconds < 1) //if (MoveInfo.StepSpan().TotalSeconds < 1)
//{ //{
// return; // return;
//} //}
if (IOValue(IO_Type.HY_TrayCheck).Equals(IO_VALUE.HIGH)) if (IOValue(IO_Type.HY_TrayCheck).Equals(IO_VALUE.HIGH))
{ {
HY03_FrontStopUp(); HY03_FrontStopUp();
} }
...@@ -876,14 +996,38 @@ namespace OnlineStore.DeviceLibrary ...@@ -876,14 +996,38 @@ namespace OnlineStore.DeviceLibrary
IOMove(IO_Type.HY_FrontStopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_FrontStopDown, IO_VALUE.LOW);
IOMove(IO_Type.HY_StopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_StopDown, IO_VALUE.LOW);
IOMove(IO_Type.HY_OL_StopDown, IO_VALUE.LOW); IOMove(IO_Type.HY_OL_StopDown, IO_VALUE.LOW);
if (IsHY11())
{
IOMove(IO_Type.HY22_FStopDown, IO_VALUE.LOW);
}
} }
else if (MoveInfo.IsStep(LineMoveStep.HY72_OL_AllStopUp)) else if (MoveInfo.IsStep(LineMoveStep.HY72_OL_AllStopUp))
{ {
if (DeviceID.Equals(211) && IOValue(IO_Type.HY22_TrayCheck).Equals(IO_VALUE.HIGH))
{
MoveInfo.NextMoveStep(LineMoveStep.HY72_OL_WaitHY22);
LogUtil.info(Name + "托盘阻挡" + MoveInfo.SLog + " 等待托盘到达信号 HY22_TrayCheck=LOW");
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY22_TrayCheck, IO_VALUE.LOW));
//MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY22_FTrayCheck, IO_VALUE.LOW));
}
else
{
MoveInfo.NextMoveStep(LineMoveStep.HY73_OL_TopUp);
CheckLog("托盘阻挡" + MoveInfo.SLog + " 开始横移，顶升上升，出料线阻挡气缸下降,横移阻挡气缸上升");
CylinderMove(MoveInfo, IO_Type.HY_TopCylinder_Down, IO_Type.HY_TopCylinder_Up);
OL_StopCylinderDown(MoveInfo);
HY_StopCylinderUp(MoveInfo);
}
}else if (MoveInfo.IsStep(LineMoveStep.HY72_OL_WaitHY22))
{
MoveInfo.NextMoveStep(LineMoveStep.HY73_OL_TopUp); MoveInfo.NextMoveStep(LineMoveStep.HY73_OL_TopUp);
CheckLog("托盘阻挡" + MoveInfo.SLog + " 开始横移，顶升上升，出料线阻挡气缸下降,横移阻挡气缸上升"); CheckLog("托盘阻挡" + MoveInfo.SLog + " 开始横移，顶升上升，出料线阻挡气缸下降,横移阻挡气缸上升");
CylinderMove(MoveInfo, IO_Type.HY_TopCylinder_Down, IO_Type.HY_TopCylinder_Up); CylinderMove(MoveInfo, IO_Type.HY_TopCylinder_Down, IO_Type.HY_TopCylinder_Up);
OL_StopCylinderDown(MoveInfo); OL_StopCylinderDown(MoveInfo);
HY_StopCylinderUp(MoveInfo); HY_StopCylinderUp(MoveInfo);
} }
else if (MoveInfo.IsStep(LineMoveStep.HY73_OL_TopUp)) else if (MoveInfo.IsStep(LineMoveStep.HY73_OL_TopUp))
{ {
...@@ -901,31 +1045,49 @@ namespace OnlineStore.DeviceLibrary ...@@ -901,31 +1045,49 @@ namespace OnlineStore.DeviceLibrary
else if (MoveInfo.IsStep(LineMoveStep.HY75_OL_StopDown)) else if (MoveInfo.IsStep(LineMoveStep.HY75_OL_StopDown))
{ {
MoveInfo.NextMoveStep(LineMoveStep.HY76_OL_WaitTray); MoveInfo.NextMoveStep(LineMoveStep.HY76_OL_WaitTray);
CheckLog("托盘阻挡" + MoveInfo.SLog + " 等待托盘到达信号");
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_OL_Tray_Check, IO_VALUE.LOW)); MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_OL_Tray_Check, IO_VALUE.LOW));
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_TrayCheck, IO_VALUE.HIGH));
if (DeviceID.Equals(211) && Config.DIList.ContainsKey(IO_Type.HY22_TrayCheck))
{
LogUtil.info(Name + " " + "托盘阻挡" + MoveInfo.SLog + " 等待托盘到达信号 HY22_TrayCheck");
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY22_TrayCheck, IO_VALUE.HIGH));
}
else
{
CheckLog("托盘阻挡" + MoveInfo.SLog + " 等待托盘到达信号");
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_TrayCheck, IO_VALUE.HIGH));
}
} }
else if (MoveInfo.IsStep(LineMoveStep.HY76_OL_WaitTray)) else if (MoveInfo.IsStep(LineMoveStep.HY76_OL_WaitTray))
{ {
MoveInfo.NextMoveStep(LineMoveStep.HY77_OL_WaitTime); MoveInfo.NextMoveStep(LineMoveStep.HY77_OL_WaitTime);
CheckLog("托盘阻挡" + MoveInfo.SLog + " 再次等待500ms，等待托盘到达信号 "); if (DeviceID.Equals(211) && Config.DIList.ContainsKey(IO_Type.HY22_TrayCheck))
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(500)); {
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_TrayCheck, IO_VALUE.HIGH)); CheckLog("托盘阻挡" + MoveInfo.SLog + " 再次等待 1000 ms，等待托盘到达信号 ");
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(1000));
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY22_TrayCheck, IO_VALUE.HIGH));
}
else
{
CheckLog("托盘阻挡" + MoveInfo.SLog + " 再次等待500ms，等待托盘到达信号 ");
MoveInfo.WaitList.Add(WaitResultInfo.WaitTime(500));
MoveInfo.WaitList.Add(WaitResultInfo.WaitIO(IO_Type.HY_TrayCheck, IO_VALUE.HIGH));
}
} }
else if (MoveInfo.IsStep(LineMoveStep.HY77_OL_WaitTime)) else if (MoveInfo.IsStep(LineMoveStep.HY77_OL_WaitTime))
{ {
UpdateTrayNum(); UpdateTrayNum();
bool isNeedHY = TrayNeedHY(currTrayNum); bool isNeedHY = TrayNeedHY(currTrayNum);
MoveInfo.NextMoveStep(LineMoveStep.HY78_OL_TopDown); MoveInfo.NextMoveStep(LineMoveStep.HY78_OL_TopDown);
LineStop(MoveInfo); LineStop(MoveInfo);
if (isNeedHY) if (isNeedHY)
{ {
CheckLog("托盘阻挡" + MoveInfo.SLog + " 电机停止，顶升不需要下降 ，出料线阻挡上升，出料线阻挡气缸上升，横移阻挡气缸上升"); CheckLog("托盘阻挡" + MoveInfo.SLog + " 电机停止，顶升不需要下降 ，出料线阻挡上升，出料线阻挡气缸上升，横移阻挡气缸上升");
} }
else else
{ {
CheckLog("托盘阻挡" + MoveInfo.SLog + " 电机停止，顶升下降 ，出料线阻挡上升，出料线阻挡气缸上升，横移阻挡气缸上升"); CheckLog("托盘阻挡" + MoveInfo.SLog + " 电机停止，顶升下降 ，出料线阻挡上升，出料线阻挡气缸上升，横移阻挡气缸上升");
CylinderMove(MoveInfo, IO_Type.HY_TopCylinder_Up, IO_Type.HY_TopCylinder_Down); CylinderMove(MoveInfo, IO_Type.HY_TopCylinder_Up, IO_Type.HY_TopCylinder_Down);
} }
...@@ -1145,10 +1307,10 @@ namespace OnlineStore.DeviceLibrary ...@@ -1145,10 +1307,10 @@ namespace OnlineStore.DeviceLibrary
{ {
//如果是出料口来的空托盘直接横移 //如果是出料口来的空托盘直接横移
if (currIsOutLineTray) //if (currIsOutLineTray)
{ //{
return true; // return true;
} //}
//如果进仓15，进仓16有料，空料盘直接横移 //如果进仓15，进仓16有料，空料盘直接横移
MoveEquip move14 = LineManager.Line.MoveEquipMap[14]; MoveEquip move14 = LineManager.Line.MoveEquipMap[14];
...@@ -1243,7 +1405,7 @@ namespace OnlineStore.DeviceLibrary ...@@ -1243,7 +1405,7 @@ namespace OnlineStore.DeviceLibrary
} }
else else
{ {
//如果横移20和横移21都有托盘，需要横移 //如果横移20和横移21都有托盘,且都在顶升状态，空托盘需要横移
if (IOManager.IOValue(IO_Type.HY_TrayCheck, 220).Equals(IO_VALUE.HIGH) && IOManager.IOValue(IO_Type.HY_TopCylinder_Up, 220).Equals(IO_VALUE.HIGH) if (IOManager.IOValue(IO_Type.HY_TrayCheck, 220).Equals(IO_VALUE.HIGH) && IOManager.IOValue(IO_Type.HY_TopCylinder_Up, 220).Equals(IO_VALUE.HIGH)
&& IOManager.IOValue(IO_Type.HY_TrayCheck, 221).Equals(IO_VALUE.HIGH) && IOManager.IOValue(IO_Type.HY_TopCylinder_Up, 221).Equals(IO_VALUE.HIGH)) && IOManager.IOValue(IO_Type.HY_TrayCheck, 221).Equals(IO_VALUE.HIGH) && IOManager.IOValue(IO_Type.HY_TopCylinder_Up, 221).Equals(IO_VALUE.HIGH))
{ {
......
source/DeviceLibrary/model/StoreStep.cs
...@@ -1314,6 +1314,8 @@ namespace OnlineStore.DeviceLibrary ...@@ -1314,6 +1314,8 @@ namespace OnlineStore.DeviceLibrary
[Description("出料线->C1线_检测到出料线托盘，所有阻挡上升")] [Description("出料线->C1线_检测到出料线托盘，所有阻挡上升")]
HY72_OL_AllStopUp, HY72_OL_AllStopUp,
[Description("出料线->C1线_等待HY22无料盘")]
HY72_OL_WaitHY22,
/// <summary> /// <summary>
/// 出料线->C1线：开始横移，顶升上升 /// 出料线->C1线：开始横移，顶升上升
/// </summary> /// </summary>
......
source/LoadCVSLibrary/storeConfig/config/IO_Type.cs
...@@ -455,8 +455,26 @@ namespace OnlineStore.LoadCSVLibrary ...@@ -455,8 +455,26 @@ namespace OnlineStore.LoadCSVLibrary
/// DI,105,T5固定气缸2下降端,SL_FixedCylinder_Down2,94,HC,X94 /// DI,105,T5固定气缸2下降端,SL_FixedCylinder_Down2,94,HC,X94
/// </summary> /// </summary>
public static string SL_FixedCylinder_Down2 = "SL_FixedCylinder_Down2"; public static string SL_FixedCylinder_Down2 = "SL_FixedCylinder_Down2";
/// <summary>
/// DI,211,HY22横移托盘检测,HY22_TrayCheck,559,HC,X559
/// </summary>
public static string HY22_TrayCheck = "HY22_TrayCheck";
/// <summary>
/// DI,211,HY22前阻挡托盘检测,HY22_FTrayCheck,270,HC,X270
/// </summary>
public static string HY22_FTrayCheck = "HY22_FTrayCheck";
/// <summary>
/// DO,211, HY22前阻挡, HY22_StopDown,230, HC, Y230, 0=上升挡停，1=下降
/// </summary>
public static string HY22_FStopDown = "HY22_FStopDown";
} }
public enum IO_VALUE public enum IO_VALUE
{ {
......
支持 Markdown 格式
你添加了 0 人 到此讨论。请谨慎行事。
Finish editing this message first!