<?xml version="1.0"?>
<doc>
    <assembly>
        <name>LibGerberVS</name>
    </assembly>
    <members>
        <member name="M:GerberVS.Drill.GetDoubleValue(GerberVS.DrillNumberFormat,GerberVS.GerberOmitZero,System.Int32)">
            <summary>
            Reads a double value and applies number formating if no decimal places.
            </summary>
            <param name="numberFormat"></param>
            <param name="omitZeros"></param>
            <param name="decimals"></param>
            <returns>double value</returns>
        </member>
        <member name="F:GerberVS.DrillGCode.Unknown">
            <summary>
            Unknown drill G code.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.Rout">
            <summary>
            Route mode
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.LinearMove">
            <summary>
            Linear (straight line) mode.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.ClockwiseMove">
            <summary>
            Circular clockwise mode.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.CounterClockwiseMove">
            <summary>
            Circular counter clockwise mode.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VariableDwell">
            <summary>
            Variable dwell.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.Drill">
            <summary>
            Drill mode.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.OverrideDrillSpeed">
            <summary>
            Override current tool feed or speed.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.RoutCircleClockwise">
            <summary>
            Routed circle canned cycle clockwise
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.RoutCircleCounterClockwise">
            <summary>
            Routed circle canned cycle counter clockwise.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionTool">
            <summary>
            Select vision tool.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionSinglePointOffset">
            <summary>
            Single point vision offset.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionMultiPointTranslate">
            <summary>
            Multipoint vision translation.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionCancel">
            <summary>
            Cancel vision translation or offset.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionCorrectHoleDrill">
            <summary>
            Vision corrected single hole drilling.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionAutoCalibrate">
            <summary>
            Vision system autocalibration.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.CutterCompensateOff">
            <summary>
            Cutter compensation off.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.CutterCompensateLeft">
            <summary>
            Cutter compensation left.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.CutterCompensateRight">
            <summary>
            Cutter compensation right.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionSinglePointOffsetRelative">
            <summary>
            Single point vision offset relative to G35 or G36.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionMultiPointTranslateRelative">
            <summary>
            Multipoint vision translation relative to G35 or G36
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionCancelRelative">
            <summary>
            Cancel vision translation or offset from G45 or G46
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.VisionCorrectHoleDrillRelative">
            <summary>
            Vision corrected single hole drilling relative to G35 or G36
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.PackDip2">
            <summary>
            Dual in line package, same to G82 in Format 2.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.PackDip">
            <summary>
            Dual in line package.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.Pack8PinL">
            <summary>
            Eight pin L pack.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.Circle">
            <summary>
            Canned circle.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.Slot">
            <summary>
            Canned slot.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.RoutSlot">
            <summary>
            Routed slot canned cycle.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.Absolute">
            <summary>
            Absolute input mode.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.Incrementle">
            <summary>
            Incremental input mode.
            </summary>
        </member>
        <member name="F:GerberVS.DrillGCode.ZeroSet">
            <summary>
            Sets work zero relative to absolute zero.
            </summary>
        </member>
        <member name="T:GerberVS.WriteExcellonDrill">
            <summary>
            Create a Excellon drill file from a gerber image.
            </summary>
        </member>
        <member name="M:GerberVS.WriteExcellonDrill.RS274XFromImage(System.String,GerberVS.GerberImage)">
            <summary>
            Export a gerber image to NC drill file format.
            </summary>
            <param name="fullPathName">Full path name to write file to</param>
            <param name="inputImage">gerber image to export</param>
            <returns></returns>
        </member>
        <member name="M:GerberVS.WriteExcellonDrill.DrillFileFromImage(System.String,GerberVS.GerberImage,GerberVS.UserTransform)">
            <summary>
            Export a gerber image to NC file format with user tranformations.
            </summary>
            <param name="fullPathName">Full path name to write file to</param>
            <param name="inputImage">gerber image to export</param>
            <param name="transform">apply the user transformations</param>
            <returns></returns>
        </member>
        <member name="T:GerberVS.WriteGerberRS274X">
            <summary>
            Create a RS274X file from a gerber image.
            </summary>
        </member>
        <member name="M:GerberVS.WriteGerberRS274X.RS274XFromImage(System.String,GerberVS.GerberImage)">
            <summary>
            Export a gerber image to RS274X file format.
            </summary>
            <param name="fullPathName">Full path name to write file to</param>
            <param name="inputImage">gerber image to export</param>
        </member>
        <member name="M:GerberVS.WriteGerberRS274X.RS274XFromImage(System.String,GerberVS.GerberImage,GerberVS.UserTransform)">
            <summary>
            Export a gerber image to RS274X file format with user tranformations.
            </summary>
            <param name="fullPathName">Full path name to write file to</param>
            <param name="inputImage">gerber image to export</param>
            <param name="transform">apply the user transformations</param>
        </member>
        <member name="T:GerberVS.GerberDraw">
            <summary>
            Render the gerber image to the target graphics object.
            </summary>
        </member>
        <member name="M:GerberVS.GerberDraw.CreatePolygonPath(System.Drawing.Drawing2D.GraphicsPath,System.Single,System.Single,System.Single)">
            <summary>
            Creates a path for flashed polygons.
            </summary>
            <param name="path">path for PathData</param>
            <param name="diameter">polygon diameter</param>
            <param name="numberOfSides">numer of sides in the polygon</param>
            <param name="rotation">rotation to apply</param>
        </member>
        <member name="T:GerberVS.GerberProject">
            <summary>
            Maintains information about the current file group.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.BackgroundColor">
            <summary>
            The background color used for rendering the project.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.FileCount">
            <summary>
            Number of files in the project.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.CurrentIndex">
            <summary>
            Index of the currently selected file.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.RenderQuality">
            <summary>
            The quality of rendering to use.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.CheckBeforeDelete">
            <summary>
            Confirm before deleting nets from an image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.ShowHiddenSelection">
            <summary>
            Determine if a user selection is shown on a hidden layer.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.Path">
            <summary>
            The default path to load project files from.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.ProjectName">
            <summary>
            The default name for the private project file.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.IsEmpty">
            <summary>
            Test for an empty project.
            </summary>
        </member>
        <member name="P:GerberVS.GerberProject.FileInfo">
            <summary>
            Gets the file information list.
            </summary>
        </member>
        <member name="M:GerberVS.GerberProject.#ctor">
            <summary>
            Creates a new instance of the gerber project type class.
            </summary>
        </member>
        <member name="T:GerberVS.GerberRenderInformation">
            <summary>
            Holds the rendering infomation for the gerber image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.ImageWidth">
            <summary>
            The width of the scaled image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.ImageHeight">
            <summary>
            The height of the scaled image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.DisplayWidth">
            <summary>
            The width of the display or print area.
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.DisplayHeight">
            <summary>
            The height of the display or print area.
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.ScaleFactorX">
            <summary>
            Gets or sets the X direction scale factor.
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.ScaleFactorY">
            <summary>
            Gets or sets the Y direction scale factor.
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.LowerLeftX">
            <summary>
            The X coordinate of the lower left corner (in real world coordinates, in inches).
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.LowerLeftY">
            <summary>
            The Y coordinate of the lower left corner (in real world coordinates, in inches).
            </summary>
        </member>
        <member name="P:GerberVS.GerberRenderInformation.RenderQuality">
            <summary>
            The quality of rendering to use when drawing layers.
            </summary>
        </member>
        <member name="M:GerberVS.GerberRenderInformation.#ctor">
            <summary>
            Creates a new RenderInformation type class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberRenderInformation.#ctor(GerberVS.GerberRenderInformation)">
            <summary>
            Creates a new RenderInformation type class from supplied data.
            </summary>
            <param name="info">date to fill the render information</param>
        </member>
        <member name="T:GerberVS.GerberFileInformation">
            <summary>
            Holds information related to an individual layer that is part of a project.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileInformation.Image">
            <summary>
            The image holding all the geometry of the layer.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileInformation.Color">
            <summary>
            The color to render this layer with.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileInformation.IsVisible">
            <summary>
            Set true if this layer file should be rendered with the project.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileInformation.FullPathName">
            <summary>
            Full path and file name.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileInformation.FileName">
            <summary>
            Short filename.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileInformation.LayerDirty">
            <summary>
            Set true if layer has been modified since last save.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileInformation.UserTransform">
            <summary>
            User specified transformation for the layer.
            </summary>
        </member>
        <member name="M:GerberVS.GerberFileInformation.#ctor">
            <summary>
            Creates a new instance of gerber file information type.
            </summary>
        </member>
        <member name="T:GerberVS.UserTransform">
            <summary>
            Defines the tranformations set by the user.
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.TranslateX">
            <summary>
            Gets or sets the X translation (in inches).
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.TranslateY">
            <summary>
            Gets or sets the Y translation (in inches).
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.ScaleX">
            <summary>
            Gets or sets the X direction scale.
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.ScaleY">
            <summary>
            Gets or sets the Y direction scale.
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.Rotation">
            <summary>
            The rotation of the layer around the origin (in degrees).
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.MirrorAroundX">
            <summary>
            True if the layer is mirrored around the X axis (horizonal flip).
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.MirrorAroundY">
            <summary>
            True if the layer is mirrored around the Y axis (vertical flip).
            </summary>
        </member>
        <member name="P:GerberVS.UserTransform.Inverted">
            <summary>
            Set true if the layer should be rendered inverted.
            </summary>
        </member>
        <member name="M:GerberVS.UserTransform.#ctor">
            <summary>
            Creates a new instance of the user transformation type class.
            </summary>
        </member>
        <member name="M:GerberVS.UserTransform.#ctor(System.Double,System.Double,System.Double,System.Double,System.Double,System.Boolean,System.Boolean,System.Boolean)">
            <summary>
            Creates a new instance of the user transformation type class with supplied parameters.
            </summary>
            <param name="translateX"></param>
            <param name="translateY"></param>
            <param name="scaleX"></param>
            <param name="scaleY"></param>
            <param name="rotation"></param>
            <param name="mirrorArroundX"></param>
            <param name="mirrorAroundY"></param>
            <param name="inverted"></param>
        </member>
        <member name="T:GerberVS.DrillInfo">
            <summary>
            List of drills found in active levels.
            </summary>
            <remarks>Used in reporting statistics.</remarks>
        </member>
        <member name="P:GerberVS.DrillInfo.DrillCount">
            <summary>
            Number of drill holes of this size (tool number)
            </summary>
        </member>
        <member name="P:GerberVS.DrillInfo.DrillNumber">
            <summary>
            Drill number (tool number)
            </summary>
        </member>
        <member name="P:GerberVS.DrillInfo.DrillSize">
            <summary>
            Drill hole size.
            </summary>
        </member>
        <member name="P:GerberVS.DrillInfo.DrillUnit">
            <summary>
            Drill size units.
            </summary>
        </member>
        <member name="M:GerberVS.DrillInfo.#ctor">
            <summary>
            Information pertaining to a tool (drill) number.
            </summary>
        </member>
        <member name="T:GerberVS.DrillFileStats">
            <summary>
            Maintains statistics on the various codes used in a Drill file.
            </summary>
        </member>
        <member name="P:GerberVS.DrillFileStats.ErrorList">
            <summary>
            Errors found during parsing of a drill file.
            </summary>
        </member>
        <member name="P:GerberVS.DrillFileStats.DrillInfoList">
            <summary>
            Drill information for each tool in the drill file.
            </summary>
        </member>
        <member name="M:GerberVS.DrillFileStats.AddNewError(System.Int32,System.String,GerberVS.GerberErrorType,System.String,System.Int32)">
            <summary>
            Adds a new error to the error list;
            </summary>
            <param name="level">level</param>
            <param name="errorMessage">error message</param>
            <param name="errorType">type of error</param>
            <param name="lineNumber">line number in the file where the error occurred</param>
            <param name="fileName"> file in which the error occurred</param>
            <remarks>
            Only unique errors are added to the list.
            </remarks>
        </member>
        <member name="M:GerberVS.DrillFileStats.AddNewError(System.Int32,System.String,GerberVS.GerberErrorType)">
            <summary>
            Adds a new error to the error list;
            </summary>
            <param name="level">level</param>
            <param name="errorMessage">error message</param>
            <param name="errorType">type of error</param>
        </member>
        <member name="M:GerberVS.DrillFileStats.IncrementDrillCounter(System.Int32)">
            <summary>
            Update the count of an existing drill.
            </summary>
            <param name="drillNumber"></param>
        </member>
        <member name="M:GerberVS.DrillFileStats.ModifyDrillList(System.Int32,System.Double,System.String)">
            <summary>
            Updates the drill information of an existing drill entry.
            </summary>
            <param name="drillNumber"></param>
            <param name="drillSize"></param>
            <param name="drillUnit"></param>
        </member>
        <member name="M:GerberVS.DrillFileStats.AddToDrillList(System.Int32,System.Double,System.String)">
            <summary>
            Adds a new drill to the drill list.
            </summary>
            <param name="drillNumber"></param>
            <param name="drillSize"></param>
            <param name="drillUnit"></param>
        </member>
        <member name="T:GerberVS.GerberDllException">
            <summary>
            GerberVS.GerberDLLException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberDllException.#ctor">
            <summary>
            Initialses a new instance of GerberVS.GerberDLLException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberDllException.#ctor(System.String)">
            <summary>
            Initialses a new instance of GerberVS.GerberDLLException class with a specified error message.
            </summary>
            <param name="message">error message.</param>
        </member>
        <member name="M:GerberVS.GerberDllException.#ctor(System.String,System.Exception)">
            <summary>
            Initialses a new instance of GerberVS.GerberDLLException class with a specified error message and a reference to the inner exception.
            </summary>
            <param name="message">error message</param>
            <param name="innerException">inner exception.</param>
        </member>
        <member name="M:GerberVS.GerberDllException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Initialses a new instance of GerberVS.GerberDLLException class with a specified serialization information and streaming context.
            </summary>
            <param name="info">serialization info.</param>
            <param name="context">streaming context.</param>
        </member>
        <member name="T:GerberVS.GerberFileException">
            <summary>
            GerberVS.GerberFileException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberFileException.#ctor">
            <summary>
            Initialses a new instance of GerberVS.GerberFileException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberFileException.#ctor(System.String)">
            <summary>
            Initialses a new instance of GerberVS.GerberFileException class with a specified error message.
            </summary>
            <param name="message">exception message</param>
        </member>
        <member name="M:GerberVS.GerberFileException.#ctor(System.String,System.Exception)">
            <summary>
            Initialses a new instance of GerberVS.GerberFileException class with a specified error message and a reference to the inner exception.
            </summary>
            <param name="message">error message</param>
            <param name="innerException">inner exception</param>
        </member>
        <member name="M:GerberVS.GerberFileException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Initialses a new instance of GerberVS.GerberFileException class with a specified serialization information and streaming context.
            </summary>
            <param name="info">serialization info.</param>
            <param name="context">streaming context.</param>
        </member>
        <member name="T:GerberVS.GerberApertureException">
            <summary>
            GerberVS.GerberApertureException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberApertureException.#ctor">
            <summary>
            Initialses a new instance of GerberVS.GerberApertureException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberApertureException.#ctor(System.String)">
            <summary>
            Initialses a new instance of GerberVS.GerberApertureException class with a specified error message.
            </summary>
            <param name="message">exception message</param>
        </member>
        <member name="M:GerberVS.GerberApertureException.#ctor(System.String,System.Exception)">
            <summary>
            Initialses a new instance of GerberVS.GerberApertureException class with a specified error message and a reference to the inner exception.
            </summary>
            <param name="message">error message</param>
            <param name="innerException">inner exception</param>
        </member>
        <member name="M:GerberVS.GerberApertureException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Initialses a new instance of GerberVS.GerberApertureException class with a specified serialization information and streaming context.
            </summary>
            <param name="info">serialization info.</param>
            <param name="context">streaming context.</param>
        </member>
        <member name="T:GerberVS.GerberExportException">
            <summary>
             GerberVS.GerberExportException class.
             </summary>
        </member>
        <member name="M:GerberVS.GerberExportException.#ctor">
            <summary>
            Initialses a new instance of GerberVS.GerberExportException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberExportException.#ctor(System.String)">
            <summary>
            Initialses a new instance of GerberVS.GerberExportException class with a specified error message.
            </summary>
            <param name="message">exception message</param>
        </member>
        <member name="M:GerberVS.GerberExportException.#ctor(System.String,System.Exception)">
            <summary>
            Initialses a new instance of GerberVS.GerberExportException class with a specified error message and a reference to the inner exception.
            </summary>
            <param name="message">error message</param>
            <param name="innerException">inner exception</param>
        </member>
        <member name="M:GerberVS.GerberExportException.#ctor(System.Runtime.Serialization.SerializationInfo,System.Runtime.Serialization.StreamingContext)">
            <summary>
            Initialses a new instance of GerberVS.GerberExportException class with a specified serialization information and streaming context.
            </summary>
            <param name="info">serialization info.</param>
            <param name="context">streaming context.</param>
        </member>
        <member name="M:GerberVS.MacroStackOverflowException.#ctor">
            <summary>
            Initialses a new instance of GerberVS.MacroStackOverflowException class.
            </summary>
        </member>
        <member name="M:GerberVS.MacroStackOverflowException.#ctor(System.String)">
            <summary>
            Initialses a new instance of GerberVS.MacroStackOverflowException class with a specified error message.
            </summary>
            <param name="message">exception message</param>
        </member>
        <member name="M:GerberVS.GerberImageException.#ctor">
            <summary>
            Initialses a new instance of GerberVS.MacroStackOverflowException class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberImageException.#ctor(System.String)">
            <summary>
            Initialses a new instance of GerberVS.MacroStackOverflowException class with a specified error message.
            </summary>
            <param name="message">exception message</param>
        </member>
        <member name="F:GerberVS.Gerber.MinimumAperture">
            <summary>
            Lowest allowable aperture number.
            </summary>
        </member>
        <member name="F:GerberVS.Gerber.MaximumApertures">
            <summary>
            Maximum allowable apertures.
            </summary>
        </member>
        <member name="F:GerberVS.Gerber.MaximumApertureParameters">
            <summary>
            Maximum allowable aperture parameters.
            </summary>
        </member>
        <member name="M:GerberVS.Gerber.IsGerberRS427X(System.String)">
            <summary>
            Logical test for RS427X file.
            </summary>
            <param name="fullPathName">file to test</param>
            <returns>result of test</returns>
        </member>
        <member name="M:GerberVS.Gerber.ParseGerber(System.String)">
            <summary>
            Process the Gerber file.
            </summary>
            <param name="gerberFileName">full path and file name of the gerber file</param>
            <returns>gerber image</returns>
            <remarks>
            This is a wrapper which gets called from top level. 
            It does some initialization and pre-processing, and 
            then calls GerberParseFileSegment method which
            processes the actual file. Then it does final 
            modifications to the image created.
            </remarks>
        </member>
        <member name="M:GerberVS.Gerber.CalculateCircleSegmentMQ(GerberVS.GerberNet,System.Boolean,System.Double,System.Double)">
            <summary>
            Calculates the start, and sweep angles of a multi-quadrant arc.
            </summary>
            <param name="currentNet">location to save the segment data</param>
            <param name="clockwise">true if clockwise arc</param>
            <param name="centreX">center X</param>
            <param name="centreY">center Y</param>
        </member>
        <member name="M:GerberVS.Gerber.UpdateImageBounds(GerberVS.BoundingBox,System.Double,System.Double,GerberVS.GerberImage)">
            <summary>
            Running update of the final image size.
            </summary>
            <param name="boundingBox">current net's bounding box</param>
            <param name="repeatOffsetX">step and repeat X</param>
            <param name="repeatOffsetY">step and repeat Y</param>
            <param name="gerberImage">save the update in gerberImage.info</param>
        </member>
        <member name="M:GerberVS.Gerber.UpdateNetBounds(GerberVS.BoundingBox,System.Double,System.Double,System.Double,System.Double)">
            <summary>
            Running update of the current net bounding box.
            </summary>
            <param name="boundingBox">current net's bounding box</param>
            <param name="x"></param>
            <param name="y"></param>
            <param name="width"></param>
            <param name="height"></param>
        </member>
        <member name="M:GerberVS.Gerber.AddTrailingZeros(System.Int32,System.Int32,System.Int32,System.Int32@)">
            <summary>
            Adds trailing zeros if they are omitted.
            </summary>
            <param name="integerPart">integer part of the format scale (FS)</param>
            <param name="decimalPart">decimal part od the formatscale (FS)</param>
            <param name="length">length of coordinate</param>
            <param name="coordinate">coordinate value</param>
        </member>
        <member name="T:GerberVS.GerberApertureInfo">
            <summary>
            Type class containing information on an aperture for stats report.
            </summary>
        </member>
        <member name="P:GerberVS.GerberApertureInfo.Number">
            <summary>
            Aperture number.
            </summary>
        </member>
        <member name="P:GerberVS.GerberApertureInfo.Level">
            <summary>
            Aperture level.
            </summary>
        </member>
        <member name="P:GerberVS.GerberApertureInfo.Count">
            <summary>
            Number of D codes.
            </summary>
        </member>
        <member name="P:GerberVS.GerberApertureInfo.ApertureType">
            <summary>
            Type of aperture.
            </summary>
        </member>
        <member name="M:GerberVS.GerberApertureInfo.#ctor">
            <summary>
            Creates a new instance of the aperture information type class.
            </summary>
        </member>
        <member name="M:GerberVS.GerberApertureInfo.Parameters">
            <summary>
            Aperture parameter list.
            </summary>
        </member>
        <member name="T:GerberVS.Aperture">
            <summary>
            Type class for defining an aperture.
            </summary>
        </member>
        <member name="P:GerberVS.Aperture.ApertureType">
            <summary>
            Aperture type.
            </summary>
        </member>
        <member name="P:GerberVS.Aperture.ApertureMacro">
            <summary>
            Aperture macro.
            </summary>
        </member>
        <member name="P:GerberVS.Aperture.ParameterCount">
            <summary>
            Actual number of parameters.
            </summary>
        </member>
        <member name="P:GerberVS.Aperture.Unit">
            <summary>
            Scale units of the parameters.
            </summary>
        </member>
        <member name="P:GerberVS.Aperture.SimplifiedMacroList">
            <summary>
            Gets the simplified macro list.
            </summary>
        </member>
        <member name="M:GerberVS.Aperture.#ctor">
            <summary>
            Creates a new instance of an aperture definition type class.
            </summary>
        </member>
        <member name="M:GerberVS.Aperture.Parameters">
            <summary>
            Aperture parameters.
            </summary>
        </member>
        <member name="T:GerberVS.ApertureMacro">
            <summary>
            Type class for defining an aperture macro.
            </summary>
        </member>
        <member name="P:GerberVS.ApertureMacro.InstructionList">
            <summary>
            Gets the macro instruction list.
            </summary>
        </member>
        <member name="P:GerberVS.ApertureMacro.Name">
            <summary>
            Aperture name.
            </summary>
        </member>
        <member name="P:GerberVS.ApertureMacro.NufPushes">
            <summary>
            Nuf pushes in program to estimate stack size.
            </summary>
        </member>
        <member name="M:GerberVS.ApertureMacro.#ctor">
            <summary>
            Creates a new instance of the Aperture Macro class.
            </summary>
        </member>
        <member name="M:GerberVS.ApertureMacro.ParseApertureMacro(GerberVS.GerberLineReader)">
            <summary>
            Read in and resolve the aperture macro data.
            </summary>
            <param name="reader">line holding the macro data</param>
            <returns>the resolved apertur macro</returns>
        </member>
        <member name="M:GerberVS.ApertureMacro.OperatorPrecedence(GerberVS.GerberOpCode)">
            <summary>
            Gets the precedence of operator codes.
            </summary>
            <param name="opcode">operater code</param>
            <returns>value indicating precedence</returns>
        </member>
        <member name="T:GerberVS.SimplifiedApertureMacro">
            <summary>
            Type class for simplifing and defining an aperture macro.
            </summary>
        </member>
        <member name="P:GerberVS.SimplifiedApertureMacro.ApertureType">
            <summary>
            Aperture type.
            </summary>
        </member>
        <member name="P:GerberVS.SimplifiedApertureMacro.Parameters">
            <summary>
            Parameters that define the aperture.
            </summary>
        </member>
        <member name="M:GerberVS.SimplifiedApertureMacro.#ctor">
            <summary>
            Creates a new instance of a aperture macro.
            </summary>
        </member>
        <member name="M:GerberVS.SimplifiedApertureMacro.#ctor(System.Collections.ObjectModel.Collection{System.Double})">
            <summary>
            Creates a new instance of a aperture macro with predefined parameters.
            </summary>
            <param name="parameters"></param>
        </member>
        <member name="M:GerberVS.SimplifiedApertureMacro.SimplifyApertureMacro(GerberVS.Aperture,System.Double)">
            <summary>
            Simplifies an aperture macro.
            </summary>
            <param name="aperture">aperture to be simplified</param>
            <param name="scale">scale to use when simplifing</param>
            <returns> true on success</returns>
        </member>
        <member name="T:GerberVS.CircleSegment">
            <summary>
            Type class for defining gerber circle segments.
            </summary>
        </member>
        <member name="P:GerberVS.CircleSegment.CenterX">
            <summary>
            Center X coordinate.
            </summary>
        </member>
        <member name="P:GerberVS.CircleSegment.CenterY">
            <summary>
            Center Y coordinate.
            </summary>
        </member>
        <member name="P:GerberVS.CircleSegment.Width">
            <summary>
            Rectangular width of the segment.
            </summary>
        </member>
        <member name="P:GerberVS.CircleSegment.Height">
            <summary>
            Rectangular height of the segment.
            </summary>
        </member>
        <member name="P:GerberVS.CircleSegment.StartAngle">
            <summary>
            Start angle of the circle segment in degrees.
            </summary>
        </member>
        <member name="P:GerberVS.CircleSegment.EndAngle">
            <summary>
            End angle of the circle segment in degrees.
            </summary>
        </member>
        <member name="P:GerberVS.CircleSegment.SweepAngle">
            <summary>
            Gets the sweep angle based on the start and end angles.
            </summary>
        </member>
        <member name="M:GerberVS.CircleSegment.#ctor">
            <summary>
            Create a new instance of the circle segment type class.
            </summary>
        </member>
        <member name="M:GerberVS.CircleSegment.#ctor(System.Double,System.Double,System.Double,System.Double,System.Double,System.Double)">
            <summary>
            Create a new instance of the circle segment type class with parameters.
            </summary>
            <param name="centreX">center x coordinate</param>
            <param name="centreY">center y coordinate</param>
            <param name="width">rectanglar width</param>
            <param name="height">retangular height</param>
            <param name="startAngle">circle segment start angle in degrees</param>
            <param name="endAngle">circle segment end angle in degrees</param>
        </member>
        <member name="T:GerberVS.GerberError">
            <summary>
            Maintains a list of errors encounted during parsing of the gerber file.
            </summary>
        </member>
        <member name="M:GerberVS.GerberError.#ctor(System.Int32,System.String,GerberVS.GerberErrorType,System.String,System.Int32)">
            <summary>
            Creates an new instance of an error log entry.
            </summary>
            <param name="level"></param>
            <param name="errorMessage"></param>
            <param name="errorType"></param>
            <param name="fileName"></param>
            <param name="lineNumber"></param>
        </member>
        <member name="T:GerberVS.GerberImageInfo">
            <summary>
            Class defining the information about an image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.ImageName">
            <summary>
            User supplied name for the image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.Polarity">
            <summary>
            The polarity in wich the image will be rendered.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.MinX">
            <summary>
            Minimum X dimension of the image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.MinY">
            <summary>
            Minimum Y dimension of the image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.MaxX">
            <summary>
            Maximum X dimension of the image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.MaxY">
            <summary>
            Maximum Y dimension of the image.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.OffsetA">
            <summary>
            Offset on the A axis.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.OffsetB">
            <summary>
            Offset on the B axis.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImageInfo.ImageRotation">
            <summary>
            Rotation angle of the image.
            </summary>
        </member>
        <member name="M:GerberVS.GerberImageInfo.#ctor">
            <summary>
            Creates a new instance of the gerber image information type.
            </summary>
        </member>
        <member name="T:GerberVS.GerberImage">
            <summary>
            Creates a new gerber image and initializes its members
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.ApertureMacroList">
            <summary>
            A list of all aperture macros used (only used in RS274X types).
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.GerberNetList">
            <summary>
            A list of all geometric entities in the layer.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.LevelList">
            <summary>
            A list of all RS274X levels used (only used in RS274X types).
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.NetStateList">
            <summary>
            A list all RS274X states used (only used in RS274X types).
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.ImageInfo">
            <summary>
            Miscellaneous info regarding the layer such as overall size, etc.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.FileType">
            <summary>
            The type of file (RS274X, drill).
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.Format">
            <summary>
            The layer formating information.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.Unit">
            <summary>
            The gerber image unit of messure.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.GerberStats">
            <summary>
            RS274X statistics for the layer.
            </summary>
        </member>
        <member name="P:GerberVS.GerberImage.DrillStats">
            <summary>
            Excellon drill statistics for the layer.
            </summary>
        </member>
        <member name="M:GerberVS.GerberImage.#ctor">
            <summary>
            Creates a new instance of the gerber image type.
            </summary>
        </member>
        <member name="M:GerberVS.GerberImage.#ctor(System.String)">
            <summary>
            Creates a new instance of the gerber image type.
            </summary>
            <param name="fileTypeName">type of file, eg rs274-x, drill</param>
        </member>
        <member name="M:GerberVS.GerberImage.ApertureArray">
            <summary>
            List of apertures used.
            </summary>
            <returns>aperture array</returns>
        </member>
        <member name="M:GerberVS.GerberImage.ImageVerify">
            <summary>
            Perform some basic integrity checks on the gerber image.
            </summary>
            <returns>error status</returns>
        </member>
        <member name="M:GerberVS.GerberImage.DeleteNet(System.Int32)">
            <summary>
            Remove a net from the image.
            </summary>
            <param name="index">index within the net list</param>
        </member>
        <member name="M:GerberVS.GerberImage.Copy(GerberVS.GerberImage)">
            <summary>
            Creates a copy of the gerber image.
            </summary>
            <param name="sourceImage">image to be copied</param>
            <returns>a deep copy of the source image</returns>
        </member>
        <member name="T:GerberVS.GerberLevel">
            <summary>
            Class for defining a gerber level.
            </summary>
            <remarks>
            Constructor name "Level" replaces "Layer" in the later Gerber specifications.
            </remarks>
        </member>
        <member name="P:GerberVS.GerberLevel.StepAndRepeat">
            <summary>
            The current step and repeat group for this level.
            </summary>
        </member>
        <member name="P:GerberVS.GerberLevel.Polarity">
            <summary>
            Dark or clear polarity for this level.
            </summary>
        </member>
        <member name="P:GerberVS.GerberLevel.LevelName">
            <summary>
            The level name.
            </summary>
        </member>
        <member name="M:GerberVS.GerberLevel.#ctor(GerberVS.GerberImage)">
            <summary>
            Creates a new Gerber Level.
            </summary>
        </member>
        <member name="M:GerberVS.GerberKnockout.#ctor">
            <summary>
            Creates a new instance of GerberKnockout.
            </summary>
        </member>
        <member name="T:GerberVS.GerberStepAndRepeat">
            <summary>
            Step and Repeat class.
            </summary>
        </member>
        <member name="T:GerberVS.GerberLineReader">
            <summary>
            Manage the reading of the Gerber file.
            </summary>
        </member>
        <member name="M:GerberVS.GerberLineReader.#ctor(System.IO.StreamReader)">
            <summary>
            Initialize a new instance of the gerber line reader.
            </summary>
            <param name="streamReader">stream to read from</param>
        </member>
        <member name="M:GerberVS.GerberLineReader.Peek">
            <summary>
            Reads the next character in the line without consuming it.
            </summary>
            <returns></returns>
        </member>
        <member name="M:GerberVS.GerberLineReader.Read">
            <summary>
            Reads the next character or the first character of the next line if at the end of the current line.
            </summary>
            <returns>the character read</returns>
        </member>
        <member name="M:GerberVS.GerberLineReader.ReadLineToEnd">
            <summary>
            Reads from the current line position to end of line removing new line characters.
            </summary>
        </member>
        <member name="M:GerberVS.GerberLineReader.ReadLine(System.Int32)">
            <summary>
            Reads a specified number of characters into the return string.
            </summary>
            <param name="count">number of characters to read</param>
            <returns>the resultant string</returns>
        </member>
        <member name="M:GerberVS.GerberLineReader.ReadLine(System.Char)">
            <summary>
            Reads the current line up to but not including the first occurance of a specified character.
            </summary>
            <param name="value">character to read to</param>
            <returns>the resulting string</returns>
        </member>
        <member name="M:GerberVS.GerberLineReader.GetIntegerValue(System.Int32@)">
            <summary>
            Reads the line data and converts a series of digits to an integer.
            </summary>
            <param name="length">number of digit in the integer</param>
            <returns>the value as an integer</returns>
        </member>
        <member name="M:GerberVS.GerberLineReader.GetDoubleValue">
            <summary>
            Reads the line data and converts a series of digits to a double precision number.
            </summary>
            <returns>double precision value</returns>
        </member>
        <member name="M:GerberVS.GerberLineReader.GetDoubleValue(System.Int32@)">
            <summary>
            Reads the line data and converts a series of digits to a double precision number.
            </summary>
            <param name="length">number of digits including the decimal point but excluding any prefixed sign</param>
            <returns>double precision value</returns>
        </member>
        <member name="M:GerberVS.GerberLineReader.SkipWhiteSpaces">
            <summary>
            Skips over white spaces.
            </summary>
        </member>
        <member name="T:GerberVS.GerberNet">
            <summary>
            Class for defining the gerber net.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.StartX">
            <summary>
            X coordinate of the start point.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.StartY">
            <summary>
            Y coordinate of the start point.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.EndX">
            <summary>
            X coordinate of the end point.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.EndY">
            <summary>
            Y coordinate of the end point.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.BoundingBox">
            <summary>
            Bounding size containing this net.
            </summary>
            <remarks>
            Used for rendering optimizations.
            </remarks>
        </member>
        <member name="P:GerberVS.GerberNet.Aperture">
            <summary>
            Index of the aperture used for this entity.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.ApertureState">
            <summary>
            State of the aperture tool (on/off/etc).
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.Interpolation">
            <summary>
            Path interpolation method (linear/circular/etc).
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.CircleSegment">
            <summary>
            Data for circular nets.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.Label">
            <summary>
            Label for this net.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.Level">
            <summary>
            RS274X level this net belongs to.
            </summary>
        </member>
        <member name="P:GerberVS.GerberNet.NetState">
            <summary>
            RS274X state this net belongs to.
            </summary>
        </member>
        <member name="M:GerberVS.GerberNet.#ctor(GerberVS.GerberImage)">
            <summary>
            Creates a new instance of a gerber net and appends it to the net list.
            </summary>
            <param name="gerberImage">image containing the net</param>
        </member>
        <member name="M:GerberVS.GerberNet.#ctor(GerberVS.GerberImage,GerberVS.GerberNet,GerberVS.GerberLevel,GerberVS.GerberNetState)">
            <summary>
            Creates a new instance of a gerber net and appends it to the net list.
            </summary>
            <param name="gerberImage">image containing the net</param>
            <param name="currentNet">the current gerber net</param>
            <param name="level">level infomation for the new net </param>
            <param name="netState">state information for the new net</param>
        </member>
        <member name="T:GerberVS.BoundingBox">
            <summary>
            Defines the bounding size of Gerber Net objects.
            </summary>
            <remarks>
            A bounding box with any values consisting of double "MinValue" and "MaxValue" is deemed invalid.
            </remarks>
        </member>
        <member name="P:GerberVS.BoundingBox.Left">
            <summary>
            The X coordinate of the left side of the bounds.
            </summary>
        </member>
        <member name="P:GerberVS.BoundingBox.Top">
            <summary>
            The Y coordinate of the top of the bounds.
            </summary>
        </member>
        <member name="P:GerberVS.BoundingBox.Right">
            <summary>
            The X coordinate of the right side of the bounds.
            </summary>
        </member>
        <member name="P:GerberVS.BoundingBox.Bottom">
            <summary>
            The Y coordinate of the bottom of the bounds.
            </summary>
        </member>
        <member name="M:GerberVS.BoundingBox.#ctor">
            <summary>
            Intializes a new instance of BoundingBox with empty parameters.
            </summary>
        </member>
        <member name="M:GerberVS.BoundingBox.#ctor(System.Double,System.Double,System.Double,System.Double)">
            <summary>
            Intializes a new instance of BoundingBox with specified parameters.
            </summary>
            <param name="left">left value</param>
            <param name="right">right value</param>
            <param name="bottom">botton value</param>
            <param name="top">top value</param>
        </member>
        <member name="M:GerberVS.BoundingBox.IsValid">
            <summary>
            Determines if the bounding box is a valid size.
            </summary>
            <returns>true if all bounding box values are valid</returns>
        </member>
        <member name="M:GerberVS.BoundingBox.Contains(GerberVS.PointD)">
            <summary>
            Determines if the specified point is contained within the bounds of this bounding box structure.
            </summary>
            <param name="point">the point to test</param>
            <returns>true if within the bounds</returns>
        </member>
        <member name="M:GerberVS.BoundingBox.Contains(GerberVS.BoundingBox)">
            <summary>
            Determines if the specified bounding box is contained within the bounds of this bounding box structure.
            </summary>
            <param name="boundingBox">the bounding box to test</param>
            <returns>true if within the bounds</returns>
        </member>
        <member name="M:GerberVS.BoundingBox.ToRectangle">
            <summary>
            Creates RectangleF structure from the bounding box parameters.
            </summary>
            <returns>returns the constructed rectangle</returns>
        </member>
        <member name="T:GerberVS.GerberNetState">
            <summary>
            Class for defining the current net state.
            </summary>
            <remarks>
            If any of these values change during file parsing
            a new net state is created reflecting the changes
            and added to the net state list.
            </remarks>
        </member>
        <member name="M:GerberVS.GerberNetState.#ctor(GerberVS.GerberImage)">
            <summary>
            Creates a new gerber net state and intialize with defaults.
            </summary>
        </member>
        <member name="T:GerberVS.SelectionItem">
            <summary>
            Maintains a list of selected objects and their associated net index.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionItem.SelectedNetList">
            <summary>
            Gets the net list in the current selection.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionItem.SelectedNetIndex">
            <summary>
            Gets the list of net indexes in the cuttent selection
            </summary>
        </member>
        <member name="M:GerberVS.SelectionItem.#ctor">
            <summary>
            Creates a new instance of the selection item type class.
            </summary>
        </member>
        <member name="T:GerberVS.SelectionInformation">
            <summary>
            Holds information about the current user selection.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.FileInfo">
            <summary>
            File information on the  current selection layer.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.SelectionType">
            <summary>
            Indicates whether a point or region type selection is used.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.LowerLeftX">
            <summary>
            Lower left X coorinate of the selection region.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.LowerLeftY">
            <summary>
            Lower left Y coorinate of the selection region.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.UpperRightX">
            <summary>
            Upper right X coorinate of the selection region.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.UpperRightY">
            <summary>
            Upper right Y coorinate of the selection region.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.SelectedNodeArray">
            <summary>
            Gets the list of objects and their indexes in the current selection.
            </summary>
        </member>
        <member name="P:GerberVS.SelectionInformation.Count">
            <summary>
            Gets the number of nets in the current selection.
            </summary>
        </member>
        <member name="M:GerberVS.SelectionInformation.#ctor(GerberVS.GerberFileInformation)">
            <summary>
            Creates a new instance of the selection information type class.
            </summary>
        </member>
        <member name="T:GerberVS.GerberSelectRegion">
            <summary>
            Test for hits in the underlying graphics objects.
            </summary>
        </member>
        <member name="M:GerberVS.GerberSelectRegion.PointInObject(System.Drawing.Graphics,GerberVS.SelectionInformation,System.Int32@)">
            <summary>
            Adds an object to the selection list if the test point is within it's bounds.
            </summary>
            <param name="graphics">target graphics</param>
            <param name="selectionInfo">selection data</param>
            <param name="index">current net index</param>
        </member>
        <member name="M:GerberVS.GerberSelectRegion.ObjectsInRegion(System.Drawing.Graphics,GerberVS.SelectionInformation,System.Int32@)">
            <summary>
            Adds an object to the selection list if it's bounds lies within the selection bounds.
            </summary>
            <param name="graphics">target graphics</param>
            <param name="selectionInfo">selection data</param>
            <param name="index">current net index</param>
        </member>
        <member name="P:GerberVS.GerberState.CurrentX">
            <summary>
            Current X location.
            </summary>
        </member>
        <member name="P:GerberVS.GerberState.CurrentY">
            <summary>
            Current Y location.
            </summary>
        </member>
        <member name="P:GerberVS.GerberState.PreviousX">
            <summary>
            Previous X location
            </summary>
        </member>
        <member name="P:GerberVS.GerberState.PreviousY">
            <summary>
            Previous Y location.
            </summary>
        </member>
        <member name="P:GerberVS.GerberState.RegionStartNode">
            <summary>
            Start node (net) of a fill region.
            </summary>
        </member>
        <member name="P:GerberVS.GerberState.IsRegionFill">
            <summary>
            Determines if the state is a region fill.
            </summary>
        </member>
        <member name="P:GerberVS.GerberState.MultiQuadrant">
            <summary>
            Multi quadrant state if true, else single quadrant.
            </summary>
        </member>
        <member name="M:GerberVS.GerberState.#ctor">
            <summary>
            Creates a new instance of the gerber state.
            </summary>
        </member>
        <member name="T:GerberVS.GerberFileStats">
            <summary>
            Maintains statistics on the various codes used in a RS274X file.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileStats.ErrorList">
            <summary>
            Gets the error list.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileStats.ApertureList">
            <summary>
            Gets the aperture list.
            </summary>
        </member>
        <member name="P:GerberVS.GerberFileStats.DCodeList">
            <summary>
            Gets the D code list.
            </summary>
        </member>
        <member name="M:GerberVS.GerberFileStats.#ctor">
            <summary>
            Create a new instance of the Gerber file stats.
            </summary>
        </member>
        <member name="M:GerberVS.GerberFileStats.AddNewError(System.Int32,System.String,GerberVS.GerberErrorType,System.String,System.Int32)">
            <summary>
            Adds a new error to the error list;
            </summary>
            <param name="level">level</param>
            <param name="errorMessage">error message</param>
            <param name="errorType">type of error</param>
            <param name="fileName"> file in which the error occurred</param>
            <param name="lineNumber">line number in the file where the error occurred</param>
            <remarks>
            Only unique errors are added to the list.
            </remarks>
        </member>
        <member name="M:GerberVS.GerberFileStats.AddNewError(System.Int32,System.String,GerberVS.GerberErrorType)">
            <summary>
            Adds a new error to the error list;
            </summary>
            <param name="level">level</param>
            <param name="errorMessage">error message</param>
            <param name="errorType">type of error</param>
        </member>
        <member name="M:GerberVS.GerberFileStats.AddNewDList(System.Int32)">
            <summary>
            Add a new aperture definition to the D list.
            </summary>
            <param name="number">aperture number</param>
        </member>
        <member name="M:GerberVS.GerberFileStats.IncrementDListCount(System.Int32,System.Int32,System.Int32)">
            <summary>
            Add the aperture to the D list count.
            </summary>
            <param name="number">d code aperture number</param>
            <param name="count">d code count</param>
            <param name="line">current file line number</param>
            <returns></returns>
        </member>
        <member name="T:GerberVS.LibGerberVS">
            <summary>
            Gerber process library.
            </summary>
        </member>
        <member name="M:GerberVS.LibGerberVS.CreateNewProject">
            <summary>
            Creates a new Gerber Project.
            </summary>
            <returns>the newly created project</returns>
        </member>
        <member name="M:GerberVS.LibGerberVS.OpenLayerFromFileName(GerberVS.GerberProject,System.String)">
            <summary>
            Opens a layer and appends it to the project.
            </summary>
            <param name="project">project to append file</param>
            <param name="fullPathName">file to open</param>
            <returns></returns>
        </member>
        <member name="M:GerberVS.LibGerberVS.OpenLayerFromFileNameAndColor(GerberVS.GerberProject,System.String,System.Drawing.Color)">
            <summary>
            Opens a layer and appends it to the project using the specified color and alpha level.
            </summary>
            <param name="project">project</param>
            <param name="fullPathName">file path</param>
            <param name="color">layer color</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.SaveLayerFromIndex(GerberVS.GerberProject,System.Int32,System.String)">
            <summary>
            Saves the current image layer to the specified file.
            </summary>
            <param name="project">current project</param>
            <param name="index">index of the current layer</param>
            <param name="fullPathName">path and filename to save the file</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.SaveLayerFromIndex(GerberVS.GerberProject,System.Int32,GerberVS.GerberFileType,System.String)">
            <summary>
            Saves the current image layer to the specified file.
            </summary>
            <param name="project">current project</param>
            <param name="index">index of the current layer</param>
            <param name="fileType"> file type to save the image as</param>
            <param name="fullPathName">path and filename to save the file</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.ReloadLayer(GerberVS.GerberProject,System.Int32)">
            <summary>
            Reloads an existing layer within the current project.
            </summary>
            <param name="project">project</param>
            <param name="index">project file index to reload</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.ReloadAllLayers(GerberVS.GerberProject)">
            <summary>
            Reloads all existing layers within the current project.
            </summary>
            <param name="project">gerber project</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.UnloadLayer(GerberVS.GerberProject,System.Int32)">
            <summary>
            Removes a file from the project at the specified index.
            </summary>
            <param name="project">project containing the file info to remove</param>
            <param name="index">index to remove at</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.UnloadAllLayers(GerberVS.GerberProject)">
            <summary>
            Removes all layers from the project.
            </summary>
            <param name="project">project containing the file list.</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.ChangeLayerOrder(GerberVS.GerberProject,System.Int32,System.Int32)">
            <summary>
            Changes the order that layers are rendered.
            </summary>
            <param name="project">project containing the file list</param>
            <param name="oldPosition">from position</param>
            <param name="newPosition">to position</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.CreateRS274XImageFromFile(System.String)">
            <summary>
            Creates the Gerber image holding all the geometry for the layer.
            </summary>
            <param name="filePath">filename containing the layer geometry</param>
            <returns>gerber image</returns>
        </member>
        <member name="M:GerberVS.LibGerberVS.CreateExcellonImageFromFile(System.String)">
            <summary>
            Creates the Gerber image holding all the geometry for the drill layer.
            </summary>
            <param name="filePath">filename containing the excellon drill geometry</param>
            <returns>gerber image</returns>
        </member>
        <member name="M:GerberVS.LibGerberVS.GetProjectBounds(GerberVS.GerberProject)">
            <summary>
            Calculates the overall image bounds of the project.
            </summary>
            <param name="project">project containing file list</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.ObjectInSelectedRegion(System.Drawing.Graphics,GerberVS.SelectionInformation,System.Int32@)">
            <summary>
            Adds a gerber object to the selection buffer if it lies within the selection region.
            </summary>
            <param name="graphics">target where the image is rendered</param>
            <param name="selectionInfo">user selection information</param>
            <param name="index">current index of the gerber net to test</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.TranslateToFitDisplay(GerberVS.GerberProject,GerberVS.GerberRenderInformation)">
            <summary>
            Applies offsets to move the image within the display area.
            </summary>
            <param name="project">project data</param>
            <param name="renderInfo">rendering information</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.ZoomToFitDisplay(GerberVS.GerberProject,GerberVS.GerberRenderInformation)">
            <summary>
            Scales and translates the image to fit centrally within the display area.
            </summary>
            <param name="project">project data</param>
            <param name="renderInfo">rendering information</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.TranslateToCenter(GerberVS.GerberProject,GerberVS.GerberRenderInformation)">
            <summary>
            Applies offsets to centre the image within the display area.
            </summary>
            <param name="project">project data</param>
            <param name="renderInfo">rendering information</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.CreateSelectionLayer(GerberVS.GerberFileInformation)">
            <summary>
            Creates a selection information object for the user selection layer data.
            </summary>
            <param name="fileInfo">file information</param>
            <returns>a new instance of the selection info </returns>
        </member>
        <member name="M:GerberVS.LibGerberVS.RenderAllLayers(System.Drawing.Graphics,GerberVS.GerberProject,GerberVS.GerberRenderInformation)">
            <summary>
            Renders all the visible layers contained within the project.
            </summary>
            <param name="graphics">surface to render the image</param>
            <param name="project">project containing the files to render</param>
            <param name="renderInfo">information for positioning, scaling and translating</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.RenderSelectionLayer(System.Drawing.Graphics,GerberVS.SelectionInformation,GerberVS.GerberRenderInformation)">
            <summary>
            Renders the layer containing the user selected objects.
            </summary>
            <param name="graphics">surface to render the image</param>
            <param name="selectionInfo">selection info of nets to render</param>
            <param name="renderInfo">information for positioning, scaling and translating</param>
        </member>
        <member name="M:GerberVS.LibGerberVS.RenderAllLayersForVectorOutput(System.Drawing.Graphics,GerberVS.GerberProject,GerberVS.GerberRenderInformation)">
            <summary>
            Draws all the visible layers contained within the project.
            </summary>
            <param name="graphics">surface to render the image</param>
            <param name="project">project containing the files to render</param>
            <param name="renderInfo">information for positioning, scaling and translating</param>
        </member>
        <member name="T:GerberVS.GerberOpCode">
            <summary>
            Op codes used when parsing aperture macros.
            </summary>
        </member>
        <member name="T:GerberVS.GerberErrorType">
            <summary>
            Error message types used in GerberVS Library.
            </summary>
        </member>
        <member name="F:GerberVS.GerberErrorType.GerberCritical">
            <summary>
            Critical error, file processing can not continue.
            </summary>
        </member>
        <member name="F:GerberVS.GerberErrorType.GerberError">
            <summary>
            Error found but processing can still continue.
            </summary>
        </member>
        <member name="F:GerberVS.GerberErrorType.GerberWarning">
            <summary>
            Encountered an issue that may provide the wrong output.
            </summary>
        </member>
        <member name="F:GerberVS.GerberErrorType.GerberNote">
            <summary>
            An irregularity was encountered, but needs no intervention.
            </summary>
        </member>
        <member name="F:GerberVS.GerberErrorType.GerberComment">
            <summary>
            Comment line found.
            </summary>
        </member>
        <member name="T:GerberVS.GerberApertureType">
            <summary>
            Enumeration of aperture types.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureType.None">
            <summary>
            No aperture used.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureType.Circle">
            <summary>
            Round aperture.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureType.Rectangle">
            <summary>
            Rectangular aperture.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureType.Oval">
            <summary>
            Ovular aperture.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureType.Polygon">
            <summary>
            Polygon aperture.
            </summary>
        </member>
        <member name="T:GerberVS.GerberApertureState">
            <summary>
            The current state of the aperture drawing tool.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureState.Off">
            <summary>
            Drawing tool is off and nothing will be drawn.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureState.On">
            <summary>
            Drawing tool is on and something will be drawn.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureState.Flash">
            <summary>
            Flash tool is on and will draw a single aperture.
            </summary>
        </member>
        <member name="F:GerberVS.GerberApertureState.Deleted">
            <summary>
            Net is marked as deleted, skip and draw nothing.
            </summary>
        </member>
        <member name="T:GerberVS.GerberUnit">
            <summary>
            The current unit used, inch or millimeter.
            </summary>
        </member>
        <member name="F:GerberVS.GerberUnit.Inch">
            <summary>
            Inches.
            </summary>
        </member>
        <member name="F:GerberVS.GerberUnit.Millimeter">
            <summary>
            Millimeters.
            </summary>
        </member>
        <member name="F:GerberVS.GerberUnit.Unspecified">
            <summary>
            Unspecified, use default units.
            </summary>
        </member>
        <member name="T:GerberVS.GerberOmitZero">
            <summary>
            Decimal point parsing style used.
            </summary>
        </member>
        <member name="F:GerberVS.GerberOmitZero.OmitZerosLeading">
            <summary>
            Omit extra zeros before the decimal point.
            </summary>
        </member>
        <member name="F:GerberVS.GerberOmitZero.OmitZerosTrailing">
            <summary>
            Omit extra zeros after the decimal point.
            </summary>
        </member>
        <member name="F:GerberVS.GerberOmitZero.OmitZerosExplicit">
            <summary>
            Explicitly specify how many decimal places are used.
            </summary>
        </member>
        <member name="F:GerberVS.GerberOmitZero.OmitZerosUnspecified">
            <summary>
            Use the default parsing style.
            </summary>
        </member>
        <member name="T:GerberVS.GerberCoordinate">
            <summary>
            The coordinate system used.
            </summary>
        </member>
        <member name="F:GerberVS.GerberCoordinate.Absolute">
            <summary>
            All coordinates are absolute from a common origin.
            </summary>
        </member>
        <member name="F:GerberVS.GerberCoordinate.Incremental">
            <summary>
            All coordinates are relative to the previous coordinate.
            </summary>
        </member>
        <member name="T:GerberVS.GerberInterpolation">
            <summary>
            The interpolation methods.
            </summary>
        </member>
        <member name="F:GerberVS.GerberInterpolation.Linear">
            <summary>
            Draw a line.
            </summary>
        </member>
        <member name="F:GerberVS.GerberInterpolation.ClockwiseCircular">
            <summary>
            Draw an arc in the clockwise direction.
            </summary>
        </member>
        <member name="F:GerberVS.GerberInterpolation.CounterclockwiseCircular">
            <summary>
            Draw an arc in the counter-clockwise direction.
            </summary>
        </member>
        <member name="F:GerberVS.GerberInterpolation.RegionStart">
            <summary>
            Start polygon region draw.
            </summary>
        </member>
        <member name="F:GerberVS.GerberInterpolation.RegionEnd">
            <summary>
            End polygon region draw.
            </summary>
        </member>
        <member name="F:GerberVS.GerberInterpolation.Deleted">
            <summary>
            Deleted by the user, and will not be drawn.
            </summary>
        </member>
        <member name="T:GerberVS.GerberFileType">
            <summary>
            Supported file types.
            </summary>
        </member>
        <member name="F:GerberVS.GerberFileType.RS274X">
            <summary>
            Gerber RS274X file.
            </summary>
        </member>
        <member name="F:GerberVS.GerberFileType.Drill">
            <summary>
            Excellon drill file.
            </summary>
        </member>
        <member name="T:GerberVS.CircleParameters">
            <summary>
            Enumerates the circlular aperture parameter indexes.
            </summary>
        </member>
        <member name="T:GerberVS.OutlineParameters">
            <summary>
            Enumerates the outline aperture parameter indexes.
            </summary>
        </member>
        <member name="T:GerberVS.GerberVerifyErrors">
            <summary>
            Error flags when verifing a gerber image is complete.
            </summary>
        </member>
        <member name="F:GerberVS.GerberVerifyErrors.None">
            <summary>
            No error found in image.
            </summary>
        </member>
        <member name="T:GerberVS.PointD">
            <summary>
            Represents an ordered pair of double precision coordinates.
            </summary>
        </member>
        <member name="P:GerberVS.PointD.X">
            <summary>
            Gets or sets the value of the X coordinate.
            </summary>
        </member>
        <member name="P:GerberVS.PointD.Y">
            <summary>
            Gets or sets the value of the Y coordinate.
            </summary>
        </member>
        <member name="M:GerberVS.PointD.#ctor(System.Double,System.Double)">
            <summary>
            Initialises a new instance of the PointD class with the specified values.
            </summary>
            <param name="x">x coordinate</param>
            <param name="y">y coordinal</param>
        </member>
        <member name="P:GerberVS.PointD.IsEmpty">
            <summary>
            Gets a value indicating whether this PointD is empty.
            </summary>
        </member>
        <member name="P:GerberVS.PointD.Empty">
            <summary>
            Returns an empty PointD structure.
            </summary>
            <returns>PointD where X = 0 and Y = 0</returns>
        </member>
        <member name="M:GerberVS.PointD.op_Equality(GerberVS.PointD,GerberVS.PointD)">
            <summary>
            Determines whether the coordinates of two points are equal.
            </summary>
            <param name="point1"></param>
            <param name="point2"></param>
            <returns>true if equal</returns>
        </member>
        <member name="M:GerberVS.PointD.op_Inequality(GerberVS.PointD,GerberVS.PointD)">
            <summary>
            Determines whether the coordinates of two points are not equal.
            </summary>
            <param name="point1"></param>
            <param name="point2"></param>
            <returns>true if not equal</returns>
        </member>
        <member name="M:GerberVS.PointD.GetHashCode">
            <summary>
            Get a hash code for this PointD structure.
            </summary>
            <returns>has code</returns>
        </member>
        <member name="M:GerberVS.PointD.Equals(System.Object)">
            <summary>
            Test to see if object PointD is the same type and dimension as this.
            </summary>
            <param name="obj">obj to test</param>
            <returns>true if equal</returns>
        </member>
        <member name="M:GerberVS.PointD.ToString">
            <summary>
            Gets a string representation of the coordinates.
            </summary>
            <returns>coordinates as a string value</returns>
        </member>
        <member name="T:GerberVS.SizeD">
            <summary>
            Represents an order pair of double precission numbers typically for height and width of a rectangle.
            </summary>
        </member>
        <member name="P:GerberVS.SizeD.Width">
            <summary>
            Gets or sets the value of the width coordinate.
            </summary>
        </member>
        <member name="P:GerberVS.SizeD.Height">
            <summary>
            Gets or sets the value of the height coordinate.
            </summary>
        </member>
        <member name="M:GerberVS.SizeD.#ctor(System.Double,System.Double)">
            <summary>
            Initialises a new instance of the SizeD class with the specified dimensions.
            </summary>
            <param name="width">width</param>
            <param name="height">height</param>
        </member>
        <member name="P:GerberVS.SizeD.IsEmpty">
            <summary>
            Test if the SizeD has a width and height value of 0.
            </summary>
        </member>
        <member name="M:GerberVS.SizeD.Empty">
            <summary>
            Returns an empty SizeD structure.
            </summary>
            <returns>SizeD where Width = 0 and Height = 0</returns>
        </member>
        <member name="M:GerberVS.SizeD.op_Equality(GerberVS.SizeD,GerberVS.SizeD)">
            <summary>
            Determines whether the coordinates of two sizes are equal.
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
            <returns>true if equal</returns>
        </member>
        <member name="M:GerberVS.SizeD.op_Inequality(GerberVS.SizeD,GerberVS.SizeD)">
            <summary>
            Determines whether the coordinates of two sizes are not equal.
            </summary>
            <param name="value1"></param>
            <param name="value2"></param>
            <returns>true if equal</returns>
        </member>
        <member name="M:GerberVS.SizeD.op_Division(GerberVS.SizeD,System.Double)">
            <summary>
            Divide operator.
            </summary>
            <param name="size">size</param>
            <param name="value">divisor</param>
            <returns></returns>
        </member>
        <member name="M:GerberVS.SizeD.GetHashCode">
            <summary>
            Get a hash code for this SizeD structure.
            </summary>
            <returns>has code</returns>
        </member>
        <member name="M:GerberVS.SizeD.Equals(System.Object)">
            <summary>
            Test to see if object SizeD is the same type and dimension as this.
            </summary>
            <param name="obj">obj to test</param>
            <returns>true if equal</returns>
        </member>
        <member name="M:GerberVS.SizeD.ToString">
            <summary>
            Gets a string representation of the coordinates.
            </summary>
            <returns>coordinates as a string value</returns>
        </member>
    </members>
</doc>